Stream

public interface Stream
implements BaseStream<T, Stream<T>>

java.util.stream.Stream<T>


A sequence of elements supporting sequential and parallel aggregate operations. The following example illustrates an aggregate operation using Stream and IntStream:

int sum = widgets.stream()
                      .filter(w -> w.getColor() == RED)
                      .mapToInt(w -> w.getWeight())
                      .sum();
 
In this example, widgets is a Collection<Widget>. We create a stream of Widget objects via Collection.stream(), filter it to produce a stream containing only the red widgets, and then transform it into a stream of int values representing the weight of each red widget. Then this stream is summed to produce a total weight.

In addition to Stream, which is a stream of object references, there are primitive specializations for IntStream, LongStream, and DoubleStream, all of which are referred to as "streams" and conform to the characteristics and restrictions described here.

To perform a computation, stream operations are composed into a stream pipeline. A stream pipeline consists of a source (which might be an array, a collection, a generator function, an I/O channel, etc), zero or more intermediate operations (which transform a stream into another stream, such as Stream#filter(Predicate)), and a terminal operation (which produces a result or side-effect, such as Stream#count() or Stream#forEach(Consumer)). Streams are lazy; computation on the source data is only performed when the terminal operation is initiated, and source elements are consumed only as needed.

A stream implementation is permitted significant latitude in optimizing the computation of the result. For example, a stream implementation is free to elide operations (or entire stages) from a stream pipeline -- and therefore elide invocation of behavioral parameters -- if it can prove that it would not affect the result of the computation. This means that side-effects of behavioral parameters may not always be executed and should not be relied upon, unless otherwise specified (such as by the terminal operations forEach and forEachOrdered). (For a specific example of such an optimization, see the API note documented on the count() operation. For more detail, see the side-effects section of the stream package documentation.)

Collections and streams, while bearing some superficial similarities, have different goals. Collections are primarily concerned with the efficient management of, and access to, their elements. By contrast, streams do not provide a means to directly access or manipulate their elements, and are instead concerned with declaratively describing their source and the computational operations which will be performed in aggregate on that source. However, if the provided stream operations do not offer the desired functionality, the BaseStream.iterator() and BaseStream.spliterator() operations can be used to perform a controlled traversal.

A stream pipeline, like the "widgets" example above, can be viewed as a query on the stream source. Unless the source was explicitly designed for concurrent modification (such as a ConcurrentHashMap), unpredictable or erroneous behavior may result from modifying the stream source while it is being queried.

Most stream operations accept parameters that describe user-specified behavior, such as the lambda expression w -> w.getWeight() passed to mapToInt in the example above. To preserve correct behavior, these behavioral parameters:

  • must be non-interfering (they do not modify the stream source); and
  • in most cases must be stateless (their result should not depend on any state that might change during execution of the stream pipeline).

Such parameters are always instances of a functional interface such as Function, and are often lambda expressions or method references. Unless otherwise specified these parameters must be non-null.

A stream should be operated on (invoking an intermediate or terminal stream operation) only once. This rules out, for example, "forked" streams, where the same source feeds two or more pipelines, or multiple traversals of the same stream. A stream implementation may throw IllegalStateException if it detects that the stream is being reused. However, since some stream operations may return their receiver rather than a new stream object, it may not be possible to detect reuse in all cases.

Streams have a BaseStream.close() method and implement AutoCloseable. Operating on a stream after it has been closed will throw IllegalStateException. Most stream instances do not actually need to be closed after use, as they are backed by collections, arrays, or generating functions, which require no special resource management. Generally, only streams whose source is an IO channel, such as those returned by Files#lines(Path), will require closing. If a stream does require closing, it must be opened as a resource within a try-with-resources statement or similar control structure to ensure that it is closed promptly after its operations have completed.

Stream pipelines may execute either sequentially or in parallel. This execution mode is a property of the stream. Streams are created with an initial choice of sequential or parallel execution. (For example, Collection.stream() creates a sequential stream, and Collection.parallelStream() creates a parallel one.) This choice of execution mode may be modified by the BaseStream.sequential() or BaseStream.parallel() methods, and may be queried with the BaseStream.isParallel() method.

Summary

Nested classes

interface Stream.Builder<T>

A mutable builder for a Stream

Public methods

abstract boolean allMatch(Predicate<? super T> predicate)

Returns whether all elements of this stream match the provided predicate.

abstract boolean anyMatch(Predicate<? super T> predicate)

Returns whether any elements of this stream match the provided predicate.

static <T> Builder<T> builder()

Returns a builder for a Stream.

abstract <R> R collect(Supplier<R> supplier, BiConsumer<R, ? super T> accumulator, BiConsumer<R, R> combiner)

Performs a mutable reduction operation on the elements of this stream.

abstract <R, A> R collect(Collector<? super T, A, R> collector)

Performs a mutable reduction operation on the elements of this stream using a Collector.

static <T> Stream<T> concat(Stream<? extends T> a, Stream<? extends T> b)

Creates a lazily concatenated stream whose elements are all the elements of the first stream followed by all the elements of the second stream.

abstract long count()

Returns the count of elements in this stream.

abstract Stream<T> distinct()

Returns a stream consisting of the distinct elements (according to Object#equals(Object)) of this stream.

default Stream<T> dropWhile(Predicate<? super T> predicate)

Returns, if this stream is ordered, a stream consisting of the remaining elements of this stream after dropping the longest prefix of elements that match the given predicate.

static <T> Stream<T> empty()

Returns an empty sequential Stream.

abstract Stream<T> filter(Predicate<? super T> predicate)

Returns a stream consisting of the elements of this stream that match the given predicate.

abstract Optional<T> findAny()

Returns an Optional describing some element of the stream, or an empty Optional if the stream is empty.

abstract Optional<T> findFirst()

Returns an Optional describing the first element of this stream, or an empty Optional if the stream is empty.

abstract <R> Stream<R> flatMap(Function<? super T, ? extends Stream<? extends R>> mapper)

Returns a stream consisting of the results of replacing each element of this stream with the contents of a mapped stream produced by applying the provided mapping function to each element.

abstract DoubleStream flatMapToDouble(Function<? super T, ? extends DoubleStream> mapper)

Returns an DoubleStream consisting of the results of replacing each element of this stream with the contents of a mapped stream produced by applying the provided mapping function to each element.

abstract IntStream flatMapToInt(Function<? super T, ? extends IntStream> mapper)

Returns an IntStream consisting of the results of replacing each element of this stream with the contents of a mapped stream produced by applying the provided mapping function to each element.

abstract LongStream flatMapToLong(Function<? super T, ? extends LongStream> mapper)

Returns an LongStream consisting of the results of replacing each element of this stream with the contents of a mapped stream produced by applying the provided mapping function to each element.

abstract void forEach(Consumer<? super T> action)

Performs an action for each element of this stream.

abstract void forEachOrdered(Consumer<? super T> action)

Performs an action for each element of this stream, in the encounter order of the stream if the stream has a defined encounter order.

static <T> Stream<T> generate(Supplier<? extends T> s)

Returns an infinite sequential unordered stream where each element is generated by the provided Supplier.

static <T> Stream<T> iterate(T seed, Predicate<? super T> hasNext, UnaryOperator<T> next)

Returns a sequential ordered Stream produced by iterative application of the given next function to an initial element, conditioned on satisfying the given hasNext predicate.

static <T> Stream<T> iterate(T seed, UnaryOperator<T> f)

Returns an infinite sequential ordered Stream produced by iterative application of a function f to an initial element seed, producing a Stream consisting of seed, f(seed), f(f(seed)), etc.

abstract Stream<T> limit(long maxSize)

Returns a stream consisting of the elements of this stream, truncated to be no longer than maxSize in length.

abstract <R> Stream<R> map(Function<? super T, ? extends R> mapper)

Returns a stream consisting of the results of applying the given function to the elements of this stream.

default <R> Stream<R> mapMulti(BiConsumer<? super T, ? super Consumer<R>> mapper)

Returns a stream consisting of the results of replacing each element of this stream with multiple elements, specifically zero or more elements.

default DoubleStream mapMultiToDouble(BiConsumer<? super T, ? super DoubleConsumer> mapper)

Returns a DoubleStream consisting of the results of replacing each element of this stream with multiple elements, specifically zero or more elements.

default IntStream mapMultiToInt(BiConsumer<? super T, ? super IntConsumer> mapper)

Returns an IntStream consisting of the results of replacing each element of this stream with multiple elements, specifically zero or more elements.

default LongStream mapMultiToLong(BiConsumer<? super T, ? super LongConsumer> mapper)

Returns a LongStream consisting of the results of replacing each element of this stream with multiple elements, specifically zero or more elements.

abstract DoubleStream mapToDouble(ToDoubleFunction<? super T> mapper)

Returns a DoubleStream consisting of the results of applying the given function to the elements of this stream.

abstract IntStream mapToInt(ToIntFunction<? super T> mapper)

Returns an IntStream consisting of the results of applying the given function to the elements of this stream.

abstract LongStream mapToLong(ToLongFunction<? super T> mapper)

Returns a LongStream consisting of the results of applying the given function to the elements of this stream.

abstract Optional<T> max(Comparator<? super T> comparator)

Returns the maximum element of this stream according to the provided Comparator.

abstract Optional<T> min(Comparator<? super T> comparator)

Returns the minimum element of this stream according to the provided Comparator.

abstract boolean noneMatch(Predicate<? super T> predicate)

Returns whether no elements of this stream match the provided predicate.

static <T> Stream<T> of(T t)

Returns a sequential Stream containing a single element.

static <T> Stream<T> of(T... values)

Returns a sequential ordered stream whose elements are the specified values.

static <T> Stream<T> ofNullable(T t)

Returns a sequential Stream containing a single element, if non-null, otherwise returns an empty Stream.

abstract Stream<T> peek(Consumer<? super T> action)

Returns a stream consisting of the elements of this stream, additionally performing the provided action on each element as elements are consumed from the resulting stream.

abstract T reduce(T identity, BinaryOperator<T> accumulator)

Performs a reduction on the elements of this stream, using the provided identity value and an associative accumulation function, and returns the reduced value.

abstract Optional<T> reduce(BinaryOperator<T> accumulator)

Performs a reduction on the elements of this stream, using an associative accumulation function, and returns an Optional describing the reduced value, if any.

abstract <U> U reduce(U identity, BiFunction<U, ? super T, U> accumulator, BinaryOperator<U> combiner)

Performs a reduction on the elements of this stream, using the provided identity, accumulation and combining functions.

abstract Stream<T> skip(long n)

Returns a stream consisting of the remaining elements of this stream after discarding the first n elements of the stream.

abstract Stream<T> sorted(Comparator<? super T> comparator)

Returns a stream consisting of the elements of this stream, sorted according to the provided Comparator.

abstract Stream<T> sorted()

Returns a stream consisting of the elements of this stream, sorted according to natural order.

default Stream<T> takeWhile(Predicate<? super T> predicate)

Returns, if this stream is ordered, a stream consisting of the longest prefix of elements taken from this stream that match the given predicate.

abstract Object[] toArray()

Returns an array containing the elements of this stream.

abstract <A> A[] toArray(IntFunction<A[]> generator)

Returns an array containing the elements of this stream, using the provided generator function to allocate the returned array, as well as any additional arrays that might be required for a partitioned execution or for resizing.

default List<T> toList()

Accumulates the elements of this stream into a List.

Inherited methods

Public methods

allMatch

Added in API level 24
public abstract boolean allMatch (Predicate<? super T> predicate)

Returns whether all elements of this stream match the provided predicate. May not evaluate the predicate on all elements if not necessary for determining the result. If the stream is empty then true is returned and the predicate is not evaluated.

This is a short-circuiting terminal operation.

API Note:
  • This method evaluates the universal quantification of the predicate over the elements of the stream (for all x P(x)). If the stream is empty, the quantification is said to be vacuously satisfied and is always true (regardless of P(x)).
Parameters
predicate Predicate: a non-interfering, stateless predicate to apply to elements of this stream

Returns
boolean true if either all elements of the stream match the provided predicate or the stream is empty, otherwise false

anyMatch

Added in API level 24
public abstract boolean anyMatch (Predicate<? super T> predicate)

Returns whether any elements of this stream match the provided predicate. May not evaluate the predicate on all elements if not necessary for determining the result. If the stream is empty then false is returned and the predicate is not evaluated.

This is a short-circuiting terminal operation.

API Note:
  • This method evaluates the existential quantification of the predicate over the elements of the stream (for some x P(x)).
Parameters
predicate Predicate: a non-interfering, stateless predicate to apply to elements of this stream

Returns
boolean true if any elements of the stream match the provided predicate, otherwise false

builder

Added in API level 24
public static Builder<T> builder ()

Returns a builder for a Stream.

Returns
Builder<T> a stream builder

collect

Added in API level 24
public abstract R collect (Supplier<R> supplier, 
                BiConsumer<R, ? super T> accumulator, 
                BiConsumer<R, R> combiner)

Performs a mutable reduction operation on the elements of this stream. A mutable reduction is one in which the reduced value is a mutable result container, such as an ArrayList, and elements are incorporated by updating the state of the result rather than by replacing the result. This produces a result equivalent to:

R result = supplier.get();
     for (T element : this stream)
         accumulator.accept(result, element);
     return result;
 

Like reduce(java.lang.Object, java.util.function.BinaryOperator), collect operations can be parallelized without requiring additional synchronization.

This is a terminal operation.

API Note:
  • There are many existing classes in the JDK whose signatures are well-suited for use with method references as arguments to collect(). For example, the following will accumulate strings into an ArrayList:
    List<String> asList = stringStream.collect(ArrayList::new, ArrayList::add,
                                                    ArrayList::addAll);
     

    The following will take a stream of strings and concatenates them into a single string:

    String concat = stringStream.collect(StringBuilder::new, StringBuilder::append,
                                              StringBuilder::append)
                                     .toString();
     
Parameters
supplier Supplier: a function that creates a new mutable result container. For a parallel execution, this function may be called multiple times and must return a fresh value each time.

accumulator BiConsumer: an associative, non-interfering, stateless function that must fold an element into a result container.

combiner BiConsumer: an associative, non-interfering, stateless function that accepts two partial result containers and merges them, which must be compatible with the accumulator function. The combiner function must fold the elements from the second result container into the first result container.

Returns
R the result of the reduction

collect

Added in API level 24
public abstract R collect (Collector<? super T, A, R> collector)

Performs a mutable reduction operation on the elements of this stream using a Collector. A Collector encapsulates the functions used as arguments to collect(java.util.function.Supplier, java.util.function.BiConsumer, java.util.function.BiConsumer), allowing for reuse of collection strategies and composition of collect operations such as multiple-level grouping or partitioning.

If the stream is parallel, and the Collector is concurrent, and either the stream is unordered or the collector is unordered, then a concurrent reduction will be performed (see Collector for details on concurrent reduction.)

This is a terminal operation.

When executed in parallel, multiple intermediate results may be instantiated, populated, and merged so as to maintain isolation of mutable data structures. Therefore, even when executed in parallel with non-thread-safe data structures (such as ArrayList), no additional synchronization is needed for a parallel reduction.

API Note:
  • The following will accumulate strings into a List:
    List<String> asList = stringStream.collect(Collectors.toList());
     

    The following will classify Person objects by city:

    Map<String, List<Person>> peopleByCity
             = personStream.collect(Collectors.groupingBy(Person::getCity));
     

    The following will classify Person objects by state and city, cascading two Collectors together:

    Map<String, Map<String, List<Person>>> peopleByStateAndCity
             = personStream.collect(Collectors.groupingBy(Person::getState,
                                                          Collectors.groupingBy(Person::getCity)));
     
Parameters
collector Collector: the Collector describing the reduction

Returns
R the result of the reduction

concat

Added in API level 24
public static Stream<T> concat (Stream<? extends T> a, 
                Stream<? extends T> b)

Creates a lazily concatenated stream whose elements are all the elements of the first stream followed by all the elements of the second stream. The resulting stream is ordered if both of the input streams are ordered, and parallel if either of the input streams is parallel. When the resulting stream is closed, the close handlers for both input streams are invoked.

This method operates on the two input streams and binds each stream to its source. As a result subsequent modifications to an input stream source may not be reflected in the concatenated stream result.

Implementation Note:
  • Use caution when constructing streams from repeated concatenation. Accessing an element of a deeply concatenated stream can result in deep call chains, or even StackOverflowError.

    Subsequent changes to the sequential/parallel execution mode of the returned stream are not guaranteed to be propagated to the input streams.

API Note:
  • To preserve optimization opportunities this method binds each stream to its source and accepts only two streams as parameters. For example, the exact size of the concatenated stream source can be computed if the exact size of each input stream source is known. To concatenate more streams without binding, or without nested calls to this method, try creating a stream of streams and flat-mapping with the identity function, for example:
    Stream<T> concat = Stream.of(s1, s2, s3, s4).flatMap(s -> s);
     
Parameters
a Stream: the first stream

b Stream: the second stream

Returns
Stream<T> the concatenation of the two input streams

count

Added in API level 24
public abstract long count ()

Returns the count of elements in this stream. This is a special case of a reduction and is equivalent to:

return mapToLong(e -> 1L).sum();
 

This is a terminal operation.

API Note:
  • An implementation may choose to not execute the stream pipeline (either sequentially or in parallel) if it is capable of computing the count directly from the stream source. In such cases no source elements will be traversed and no intermediate operations will be evaluated. Behavioral parameters with side-effects, which are strongly discouraged except for harmless cases such as debugging, may be affected. For example, consider the following stream:
    List<String> l = Arrays.asList("A", "B", "C", "D");
         long count = l.stream().peek(System.out::println).count();
     
    The number of elements covered by the stream source, a List, is known and the intermediate operation, peek, does not inject into or remove elements from the stream (as may be the case for flatMap or filter operations). Thus the count is the size of the List and there is no need to execute the pipeline and, as a side-effect, print out the list elements.
Returns
long the count of elements in this stream

distinct

Added in API level 24
public abstract Stream<T> distinct ()

Returns a stream consisting of the distinct elements (according to Object#equals(Object)) of this stream.

For ordered streams, the selection of distinct elements is stable (for duplicated elements, the element appearing first in the encounter order is preserved.) For unordered streams, no stability guarantees are made.

This is a stateful intermediate operation.

API Note:
  • Preserving stability for distinct() in parallel pipelines is relatively expensive (requires that the operation act as a full barrier, with substantial buffering overhead), and stability is often not needed. Using an unordered stream source (such as generate(java.util.function.Supplier)) or removing the ordering constraint with BaseStream.unordered() may result in significantly more efficient execution for distinct() in parallel pipelines, if the semantics of your situation permit. If consistency with encounter order is required, and you are experiencing poor performance or memory utilization with distinct() in parallel pipelines, switching to sequential execution with BaseStream.sequential() may improve performance.
Returns
Stream<T> the new stream

dropWhile

Added in API level 34
public Stream<T> dropWhile (Predicate<? super T> predicate)

Returns, if this stream is ordered, a stream consisting of the remaining elements of this stream after dropping the longest prefix of elements that match the given predicate. Otherwise returns, if this stream is unordered, a stream consisting of the remaining elements of this stream after dropping a subset of elements that match the given predicate.

If this stream is ordered then the longest prefix is a contiguous sequence of elements of this stream that match the given predicate. The first element of the sequence is the first element of this stream, and the element immediately following the last element of the sequence does not match the given predicate.

If this stream is unordered, and some (but not all) elements of this stream match the given predicate, then the behavior of this operation is nondeterministic; it is free to drop any subset of matching elements (which includes the empty set).

Independent of whether this stream is ordered or unordered if all elements of this stream match the given predicate then this operation drops all elements (the result is an empty stream), or if no elements of the stream match the given predicate then no elements are dropped (the result is the same as the input).

This is a stateful intermediate operation.

Implementation Requirements:
  • The default implementation obtains the spliterator of this stream, wraps that spliterator so as to support the semantics of this operation on traversal, and returns a new stream associated with the wrapped spliterator. The returned stream preserves the execution characteristics of this stream (namely parallel or sequential execution as per BaseStream.isParallel()) but the wrapped spliterator may choose to not support splitting. When the returned stream is closed, the close handlers for both the returned and this stream are invoked.
API Note:
  • While dropWhile() is generally a cheap operation on sequential stream pipelines, it can be quite expensive on ordered parallel pipelines, since the operation is constrained to return not just any valid prefix, but the longest prefix of elements in the encounter order. Using an unordered stream source (such as generate(java.util.function.Supplier)) or removing the ordering constraint with BaseStream.unordered() may result in significant speedups of dropWhile() in parallel pipelines, if the semantics of your situation permit. If consistency with encounter order is required, and you are experiencing poor performance or memory utilization with dropWhile() in parallel pipelines, switching to sequential execution with BaseStream.sequential() may improve performance.
Parameters
predicate Predicate: a non-interfering, stateless predicate to apply to elements to determine the longest prefix of elements.

Returns
Stream<T> the new stream

empty

Added in API level 24
public static Stream<T> empty ()

Returns an empty sequential Stream.

Returns
Stream<T> an empty sequential stream

filter

Added in API level 24
public abstract Stream<T> filter (Predicate<? super T> predicate)

Returns a stream consisting of the elements of this stream that match the given predicate.

This is an intermediate operation.

Parameters
predicate Predicate: a non-interfering, stateless predicate to apply to each element to determine if it should be included

Returns
Stream<T> the new stream

findAny

Added in API level 24
public abstract Optional<T> findAny ()

Returns an Optional describing some element of the stream, or an empty Optional if the stream is empty.

This is a short-circuiting terminal operation.

The behavior of this operation is explicitly nondeterministic; it is free to select any element in the stream. This is to allow for maximal performance in parallel operations; the cost is that multiple invocations on the same source may not return the same result. (If a stable result is desired, use findFirst() instead.)

Returns
Optional<T> an Optional describing some element of this stream, or an empty Optional if the stream is empty

Throws
NullPointerException if the element selected is null

See also:

findFirst

Added in API level 24
public abstract Optional<T> findFirst ()

Returns an Optional describing the first element of this stream, or an empty Optional if the stream is empty. If the stream has no encounter order, then any element may be returned.

This is a short-circuiting terminal operation.

Returns
Optional<T> an Optional describing the first element of this stream, or an empty Optional if the stream is empty

Throws
NullPointerException if the element selected is null

flatMap

Added in API level 24
public abstract Stream<R> flatMap (Function<? super T, ? extends Stream<? extends R>> mapper)

Returns a stream consisting of the results of replacing each element of this stream with the contents of a mapped stream produced by applying the provided mapping function to each element. Each mapped stream is closed after its contents have been placed into this stream. (If a mapped stream is null an empty stream is used, instead.)

This is an intermediate operation.

API Note:
  • The flatMap() operation has the effect of applying a one-to-many transformation to the elements of the stream, and then flattening the resulting elements into a new stream.

    Examples.

    If orders is a stream of purchase orders, and each purchase order contains a collection of line items, then the following produces a stream containing all the line items in all the orders:

    orders.flatMap(order -> order.getLineItems().stream())...
     

    If path is the path to a file, then the following produces a stream of the words contained in that file:

    Stream<String> lines = Files.lines(path, StandardCharsets.UTF_8);
         Stream<String> words = lines.flatMap(line -> Stream.of(line.split(" +")));
     
    The mapper function passed to flatMap splits a line, using a simple regular expression, into an array of words, and then creates a stream of words from that array.
Parameters
mapper Function: a non-interfering, stateless function to apply to each element which produces a stream of new values

Returns
Stream<R> the new stream

flatMapToDouble

Added in API level 24
public abstract DoubleStream flatMapToDouble (Function<? super T, ? extends DoubleStream> mapper)

Returns an DoubleStream consisting of the results of replacing each element of this stream with the contents of a mapped stream produced by applying the provided mapping function to each element. Each mapped stream is closed after its contents have placed been into this stream. (If a mapped stream is null an empty stream is used, instead.)

This is an intermediate operation.

Parameters
mapper Function: a non-interfering, stateless function to apply to each element which produces a stream of new values

Returns
DoubleStream the new stream

See also:

flatMapToInt

Added in API level 24
public abstract IntStream flatMapToInt (Function<? super T, ? extends IntStream> mapper)

Returns an IntStream consisting of the results of replacing each element of this stream with the contents of a mapped stream produced by applying the provided mapping function to each element. Each mapped stream is closed after its contents have been placed into this stream. (If a mapped stream is null an empty stream is used, instead.)

This is an intermediate operation.

Parameters
mapper Function: a non-interfering, stateless function to apply to each element which produces a stream of new values

Returns
IntStream the new stream

See also:

flatMapToLong

Added in API level 24
public abstract LongStream flatMapToLong (Function<? super T, ? extends LongStream> mapper)

Returns an LongStream consisting of the results of replacing each element of this stream with the contents of a mapped stream produced by applying the provided mapping function to each element. Each mapped stream is closed after its contents have been placed into this stream. (If a mapped stream is null an empty stream is used, instead.)

This is an intermediate operation.

Parameters
mapper Function: a non-interfering, stateless function to apply to each element which produces a stream of new values

Returns
LongStream the new stream

See also:

forEach

Added in API level 24
public abstract void forEach (Consumer<? super T> action)

Performs an action for each element of this stream.

This is a terminal operation.

The behavior of this operation is explicitly nondeterministic. For parallel stream pipelines, this operation does not guarantee to respect the encounter order of the stream, as doing so would sacrifice the benefit of parallelism. For any given element, the action may be performed at whatever time and in whatever thread the library chooses. If the action accesses shared state, it is responsible for providing the required synchronization.

Parameters
action Consumer: a non-interfering action to perform on the elements

forEachOrdered

Added in API level 24
public abstract void forEachOrdered (Consumer<? super T> action)

Performs an action for each element of this stream, in the encounter order of the stream if the stream has a defined encounter order.

This is a terminal operation.

This operation processes the elements one at a time, in encounter order if one exists. Performing the action for one element happens-before performing the action for subsequent elements, but for any given element, the action may be performed in whatever thread the library chooses.

Parameters
action Consumer: a non-interfering action to perform on the elements

See also:

generate

Added in API level 24
public static Stream<T> generate (Supplier<? extends T> s)

Returns an infinite sequential unordered stream where each element is generated by the provided Supplier. This is suitable for generating constant streams, streams of random elements, etc.

Parameters
s Supplier: the Supplier of generated elements

Returns
Stream<T> a new infinite sequential unordered Stream

iterate

Added in API level 34
public static Stream<T> iterate (T seed, 
                Predicate<? super T> hasNext, 
                UnaryOperator<T> next)

Returns a sequential ordered Stream produced by iterative application of the given next function to an initial element, conditioned on satisfying the given hasNext predicate. The stream terminates as soon as the hasNext predicate returns false.

Stream.iterate should produce the same sequence of elements as produced by the corresponding for-loop:

for (T index=seed; hasNext.test(index); index = next.apply(index)) {
         ...
     }
 

The resulting sequence may be empty if the hasNext predicate does not hold on the seed value. Otherwise the first element will be the supplied seed value, the next element (if present) will be the result of applying the next function to the seed value, and so on iteratively until the hasNext predicate indicates that the stream should terminate.

The action of applying the hasNext predicate to an element happens-before the action of applying the next function to that element. The action of applying the next function for one element happens-before the action of applying the hasNext predicate for subsequent elements. For any given element an action may be performed in whatever thread the library chooses.

Parameters
seed T: the initial element

hasNext Predicate: a predicate to apply to elements to determine when the stream must terminate.

next UnaryOperator: a function to be applied to the previous element to produce a new element

Returns
Stream<T> a new sequential Stream

iterate

Added in API level 24
public static Stream<T> iterate (T seed, 
                UnaryOperator<T> f)

Returns an infinite sequential ordered Stream produced by iterative application of a function f to an initial element seed, producing a Stream consisting of seed, f(seed), f(f(seed)), etc.

The first element (position 0) in the Stream will be the provided seed. For n > 0, the element at position n, will be the result of applying the function f to the element at position n - 1.

The action of applying f for one element happens-before the action of applying f for subsequent elements. For any given element the action may be performed in whatever thread the library chooses.

Parameters
seed T: the initial element

f UnaryOperator: a function to be applied to the previous element to produce a new element

Returns
Stream<T> a new sequential Stream

limit

Added in API level 24
public abstract Stream<T> limit (long maxSize)

Returns a stream consisting of the elements of this stream, truncated to be no longer than maxSize in length.

This is a short-circuiting stateful intermediate operation.

API Note:
  • While limit() is generally a cheap operation on sequential stream pipelines, it can be quite expensive on ordered parallel pipelines, especially for large values of maxSize, since limit(n) is constrained to return not just any n elements, but the first n elements in the encounter order. Using an unordered stream source (such as generate(java.util.function.Supplier)) or removing the ordering constraint with BaseStream.unordered() may result in significant speedups of limit() in parallel pipelines, if the semantics of your situation permit. If consistency with encounter order is required, and you are experiencing poor performance or memory utilization with limit() in parallel pipelines, switching to sequential execution with BaseStream.sequential() may improve performance.
Parameters
maxSize long: the number of elements the stream should be limited to

Returns
Stream<T> the new stream

Throws
IllegalArgumentException if maxSize is negative

map

Added in API level 24
public abstract Stream<R> map (Function<? super T, ? extends R> mapper)

Returns a stream consisting of the results of applying the given function to the elements of this stream.

This is an intermediate operation.

Parameters
mapper Function: a non-interfering, stateless function to apply to each element

Returns
Stream<R> the new stream

mapMulti

Added in API level 34
public Stream<R> mapMulti (BiConsumer<? super T, ? super Consumer<R>> mapper)

Returns a stream consisting of the results of replacing each element of this stream with multiple elements, specifically zero or more elements. Replacement is performed by applying the provided mapping function to each element in conjunction with a consumer argument that accepts replacement elements. The mapping function calls the consumer zero or more times to provide the replacement elements.

This is an intermediate operation.

If the consumer argument is used outside the scope of its application to the mapping function, the results are undefined.

Implementation Requirements:
  • The default implementation invokes flatMap on this stream, passing a function that behaves as follows. First, it calls the mapper function with a Consumer that accumulates replacement elements into a newly created internal buffer. When the mapper function returns, it creates a stream from the internal buffer. Finally, it returns this stream to flatMap.
API Note:
  • This method is similar to flatMap in that it applies a one-to-many transformation to the elements of the stream and flattens the result elements into a new stream. This method is preferable to flatMap in the following circumstances:
    • When replacing each stream element with a small (possibly zero) number of elements. Using this method avoids the overhead of creating a new Stream instance for every group of result elements, as required by flatMap.
    • When it is easier to use an imperative approach for generating result elements than it is to return them in the form of a Stream.

    If a lambda expression is provided as the mapper function argument, additional type information may be necessary for proper inference of the element type <R> of the returned stream. This can be provided in the form of explicit type declarations for the lambda parameters or as an explicit type argument to the mapMulti call.

    Examples

    Given a stream of Number objects, the following produces a list containing only the Integer objects:

    Stream<Number> numbers = ... ;
         List<Integer> integers = numbers.<Integer>mapMulti((number, consumer) -> {
                 if (number instanceof Integer i)
                     consumer.accept(i);
             })
             .collect(Collectors.toList());
     

    If we have an Iterable<Object> and need to recursively expand its elements that are themselves of type Iterable, we can use mapMulti as follows:

    class C {
         static void expandIterable(Object e, Consumer<Object> c) {
             if (e instanceof Iterable<?> elements) {
                 for (Object ie : elements) {
                     expandIterable(ie, c);
                 }
             } else if (e != null) {
                 c.accept(e);
             }
         }
    
         public static void main(String[] args) {
             var nestedList = List.of(1, List.of(2, List.of(3, 4)), 5);
             Stream<Object> expandedStream = nestedList.stream().mapMulti(C::expandIterable);
         }
     }
     
Parameters
mapper BiConsumer: a non-interfering, stateless function that generates replacement elements

Returns
Stream<R> the new stream

See also:

mapMultiToDouble

Added in API level 34
public DoubleStream mapMultiToDouble (BiConsumer<? super T, ? super DoubleConsumer> mapper)

Returns a DoubleStream consisting of the results of replacing each element of this stream with multiple elements, specifically zero or more elements. Replacement is performed by applying the provided mapping function to each element in conjunction with a consumer argument that accepts replacement elements. The mapping function calls the consumer zero or more times to provide the replacement elements.

This is an intermediate operation.

If the consumer argument is used outside the scope of its application to the mapping function, the results are undefined.

Implementation Requirements:
  • The default implementation invokes flatMapToDouble on this stream, passing a function that behaves as follows. First, it calls the mapper function with an DoubleConsumer that accumulates replacement elements into a newly created internal buffer. When the mapper function returns, it creates a DoubleStream from the internal buffer. Finally, it returns this stream to flatMapToDouble.
Parameters
mapper BiConsumer: a non-interfering, stateless function that generates replacement elements

Returns
DoubleStream the new stream

See also:

mapMultiToInt

Added in API level 34
public IntStream mapMultiToInt (BiConsumer<? super T, ? super IntConsumer> mapper)

Returns an IntStream consisting of the results of replacing each element of this stream with multiple elements, specifically zero or more elements. Replacement is performed by applying the provided mapping function to each element in conjunction with a consumer argument that accepts replacement elements. The mapping function calls the consumer zero or more times to provide the replacement elements.

This is an intermediate operation.

If the consumer argument is used outside the scope of its application to the mapping function, the results are undefined.

Implementation Requirements:
  • The default implementation invokes flatMapToInt on this stream, passing a function that behaves as follows. First, it calls the mapper function with an IntConsumer that accumulates replacement elements into a newly created internal buffer. When the mapper function returns, it creates an IntStream from the internal buffer. Finally, it returns this stream to flatMapToInt.
Parameters
mapper BiConsumer: a non-interfering, stateless function that generates replacement elements

Returns
IntStream the new stream

See also:

mapMultiToLong

Added in API level 34
public LongStream mapMultiToLong (BiConsumer<? super T, ? super LongConsumer> mapper)

Returns a LongStream consisting of the results of replacing each element of this stream with multiple elements, specifically zero or more elements. Replacement is performed by applying the provided mapping function to each element in conjunction with a consumer argument that accepts replacement elements. The mapping function calls the consumer zero or more times to provide the replacement elements.

This is an intermediate operation.

If the consumer argument is used outside the scope of its application to the mapping function, the results are undefined.

Implementation Requirements:
  • The default implementation invokes flatMapToLong on this stream, passing a function that behaves as follows. First, it calls the mapper function with a LongConsumer that accumulates replacement elements into a newly created internal buffer. When the mapper function returns, it creates a LongStream from the internal buffer. Finally, it returns this stream to flatMapToLong.
Parameters
mapper BiConsumer: a non-interfering, stateless function that generates replacement elements

Returns
LongStream the new stream

See also:

mapToDouble

Added in API level 24
public abstract DoubleStream mapToDouble (ToDoubleFunction<? super T> mapper)

Returns a DoubleStream consisting of the results of applying the given function to the elements of this stream.

This is an intermediate operation.

Parameters
mapper ToDoubleFunction: a non-interfering, stateless function to apply to each element

Returns
DoubleStream the new stream

mapToInt

Added in API level 24
public abstract IntStream mapToInt (ToIntFunction<? super T> mapper)

Returns an IntStream consisting of the results of applying the given function to the elements of this stream.

This is an intermediate operation.

Parameters
mapper ToIntFunction: a non-interfering, stateless function to apply to each element

Returns
IntStream the new stream

mapToLong

Added in API level 24
public abstract LongStream mapToLong (ToLongFunction<? super T> mapper)

Returns a LongStream consisting of the results of applying the given function to the elements of this stream.

This is an intermediate operation.

Parameters
mapper ToLongFunction: a non-interfering, stateless function to apply to each element

Returns
LongStream the new stream

max

Added in API level 24
public abstract Optional<T> max (Comparator<? super T> comparator)

Returns the maximum element of this stream according to the provided Comparator. This is a special case of a reduction.

This is a terminal operation.

Parameters
comparator Comparator: a non-interfering, stateless Comparator to compare elements of this stream

Returns
Optional<T> an Optional describing the maximum element of this stream, or an empty Optional if the stream is empty

Throws
NullPointerException if the maximum element is null

min

Added in API level 24
public abstract Optional<T> min (Comparator<? super T> comparator)

Returns the minimum element of this stream according to the provided Comparator. This is a special case of a reduction.

This is a terminal operation.

Parameters
comparator Comparator: a non-interfering, stateless Comparator to compare elements of this stream

Returns
Optional<T> an Optional describing the minimum element of this stream, or an empty Optional if the stream is empty

Throws
NullPointerException if the minimum element is null

noneMatch

Added in API level 24
public abstract boolean noneMatch (Predicate<? super T> predicate)

Returns whether no elements of this stream match the provided predicate. May not evaluate the predicate on all elements if not necessary for determining the result. If the stream is empty then true is returned and the predicate is not evaluated.

This is a short-circuiting terminal operation.

API Note:
  • This method evaluates the universal quantification of the negated predicate over the elements of the stream (for all x ~P(x)). If the stream is empty, the quantification is said to be vacuously satisfied and is always true, regardless of P(x).
Parameters
predicate Predicate: a non-interfering, stateless predicate to apply to elements of this stream

Returns
boolean true if either no elements of the stream match the provided predicate or the stream is empty, otherwise false

of

Added in API level 24
public static Stream<T> of (T t)

Returns a sequential Stream containing a single element.

Parameters
t T: the single element

Returns
Stream<T> a singleton sequential stream

of

Added in API level 24
public static Stream<T> of (T... values)

Returns a sequential ordered stream whose elements are the specified values.

Parameters
values T: the elements of the new stream

Returns
Stream<T> the new stream

ofNullable

Added in API level 34
public static Stream<T> ofNullable (T t)

Returns a sequential Stream containing a single element, if non-null, otherwise returns an empty Stream.

Parameters
t T: the single element

Returns
Stream<T> a stream with a single element if the specified element is non-null, otherwise an empty stream

peek

Added in API level 24
public abstract Stream<T> peek (Consumer<? super T> action)

Returns a stream consisting of the elements of this stream, additionally performing the provided action on each element as elements are consumed from the resulting stream.

This is an intermediate operation.

For parallel stream pipelines, the action may be called at whatever time and in whatever thread the element is made available by the upstream operation. If the action modifies shared state, it is responsible for providing the required synchronization.

API Note:
  • This method exists mainly to support debugging, where you want to see the elements as they flow past a certain point in a pipeline:
    Stream.of("one", "two", "three", "four")
             .filter(e -> e.length() > 3)
             .peek(e -> System.out.println("Filtered value: " + e))
             .map(String::toUpperCase)
             .peek(e -> System.out.println("Mapped value: " + e))
             .collect(Collectors.toList());
     

    In cases where the stream implementation is able to optimize away the production of some or all the elements (such as with short-circuiting operations like findFirst, or in the example described in count()), the action will not be invoked for those elements.

Parameters
action Consumer: a non-interfering action to perform on the elements as they are consumed from the stream

Returns
Stream<T> the new stream

reduce

Added in API level 24
public abstract T reduce (T identity, 
                BinaryOperator<T> accumulator)

Performs a reduction on the elements of this stream, using the provided identity value and an associative accumulation function, and returns the reduced value. This is equivalent to:

T result = identity;
     for (T element : this stream)
         result = accumulator.apply(result, element)
     return result;
 
but is not constrained to execute sequentially.

The identity value must be an identity for the accumulator function. This means that for all t, accumulator.apply(identity, t) is equal to t. The accumulator function must be an associative function.

This is a terminal operation.

API Note:
  • Sum, min, max, average, and string concatenation are all special cases of reduction. Summing a stream of numbers can be expressed as:
    Integer sum = integers.reduce(0, (a, b) -> a+b);
     
    or:
    Integer sum = integers.reduce(0, Integer::sum);
     

    While this may seem a more roundabout way to perform an aggregation compared to simply mutating a running total in a loop, reduction operations parallelize more gracefully, without needing additional synchronization and with greatly reduced risk of data races.

Parameters
identity T: the identity value for the accumulating function

accumulator BinaryOperator: an associative, non-interfering, stateless function for combining two values

Returns
T the result of the reduction

reduce

Added in API level 24
public abstract Optional<T> reduce (BinaryOperator<T> accumulator)

Performs a reduction on the elements of this stream, using an associative accumulation function, and returns an Optional describing the reduced value, if any. This is equivalent to:

boolean foundAny = false;
     T result = null;
     for (T element : this stream) {
         if (!foundAny) {
             foundAny = true;
             result = element;
         }
         else
             result = accumulator.apply(result, element);
     }
     return foundAny ? Optional.of(result) : Optional.empty();
 
but is not constrained to execute sequentially.

The accumulator function must be an associative function.

This is a terminal operation.

Parameters
accumulator BinaryOperator: an associative, non-interfering, stateless function for combining two values

Returns
Optional<T> an Optional describing the result of the reduction

Throws
NullPointerException if the result of the reduction is null

reduce

Added in API level 24
public abstract U reduce (U identity, 
                BiFunction<U, ? super T, U> accumulator, 
                BinaryOperator<U> combiner)

Performs a reduction on the elements of this stream, using the provided identity, accumulation and combining functions. This is equivalent to:

U result = identity;
     for (T element : this stream)
         result = accumulator.apply(result, element)
     return result;
 
but is not constrained to execute sequentially.

The identity value must be an identity for the combiner function. This means that for all u, combiner(identity, u) is equal to u. Additionally, the combiner function must be compatible with the accumulator function; for all u and t, the following must hold:

combiner.apply(u, accumulator.apply(identity, t)) == accumulator.apply(u, t)
 

This is a terminal operation.

API Note:
  • Many reductions using this form can be represented more simply by an explicit combination of map and reduce operations. The accumulator function acts as a fused mapper and accumulator, which can sometimes be more efficient than separate mapping and reduction, such as when knowing the previously reduced value allows you to avoid some computation.
Parameters
identity U: the identity value for the combiner function

accumulator BiFunction: an associative, non-interfering, stateless function for incorporating an additional element into a result

combiner BinaryOperator: an associative, non-interfering, stateless function for combining two values, which must be compatible with the accumulator function

Returns
U the result of the reduction

skip

Added in API level 24
public abstract Stream<T> skip (long n)

Returns a stream consisting of the remaining elements of this stream after discarding the first n elements of the stream. If this stream contains fewer than n elements then an empty stream will be returned.

This is a stateful intermediate operation.

API Note:
  • While skip() is generally a cheap operation on sequential stream pipelines, it can be quite expensive on ordered parallel pipelines, especially for large values of n, since skip(n) is constrained to skip not just any n elements, but the first n elements in the encounter order. Using an unordered stream source (such as generate(java.util.function.Supplier)) or removing the ordering constraint with BaseStream.unordered() may result in significant speedups of skip() in parallel pipelines, if the semantics of your situation permit. If consistency with encounter order is required, and you are experiencing poor performance or memory utilization with skip() in parallel pipelines, switching to sequential execution with BaseStream.sequential() may improve performance.
Parameters
n long: the number of leading elements to skip

Returns
Stream<T> the new stream

Throws
IllegalArgumentException if n is negative

sorted

Added in API level 24
public abstract Stream<T> sorted (Comparator<? super T> comparator)

Returns a stream consisting of the elements of this stream, sorted according to the provided Comparator.

For ordered streams, the sort is stable. For unordered streams, no stability guarantees are made.

This is a stateful intermediate operation.

Parameters
comparator Comparator: a non-interfering, stateless Comparator to be used to compare stream elements

Returns
Stream<T> the new stream

sorted

Added in API level 24
public abstract Stream<T> sorted ()

Returns a stream consisting of the elements of this stream, sorted according to natural order. If the elements of this stream are not Comparable, a java.lang.ClassCastException may be thrown when the terminal operation is executed.

For ordered streams, the sort is stable. For unordered streams, no stability guarantees are made.

This is a stateful intermediate operation.

Returns
Stream<T> the new stream

takeWhile

Added in API level 34
public Stream<T> takeWhile (Predicate<? super T> predicate)

Returns, if this stream is ordered, a stream consisting of the longest prefix of elements taken from this stream that match the given predicate. Otherwise returns, if this stream is unordered, a stream consisting of a subset of elements taken from this stream that match the given predicate.

If this stream is ordered then the longest prefix is a contiguous sequence of elements of this stream that match the given predicate. The first element of the sequence is the first element of this stream, and the element immediately following the last element of the sequence does not match the given predicate.

If this stream is unordered, and some (but not all) elements of this stream match the given predicate, then the behavior of this operation is nondeterministic; it is free to take any subset of matching elements (which includes the empty set).

Independent of whether this stream is ordered or unordered if all elements of this stream match the given predicate then this operation takes all elements (the result is the same as the input), or if no elements of the stream match the given predicate then no elements are taken (the result is an empty stream).

This is a short-circuiting stateful intermediate operation.

Implementation Requirements:
  • The default implementation obtains the spliterator of this stream, wraps that spliterator so as to support the semantics of this operation on traversal, and returns a new stream associated with the wrapped spliterator. The returned stream preserves the execution characteristics of this stream (namely parallel or sequential execution as per BaseStream.isParallel()) but the wrapped spliterator may choose to not support splitting. When the returned stream is closed, the close handlers for both the returned and this stream are invoked.
API Note:
  • While takeWhile() is generally a cheap operation on sequential stream pipelines, it can be quite expensive on ordered parallel pipelines, since the operation is constrained to return not just any valid prefix, but the longest prefix of elements in the encounter order. Using an unordered stream source (such as generate(java.util.function.Supplier)) or removing the ordering constraint with BaseStream.unordered() may result in significant speedups of takeWhile() in parallel pipelines, if the semantics of your situation permit. If consistency with encounter order is required, and you are experiencing poor performance or memory utilization with takeWhile() in parallel pipelines, switching to sequential execution with BaseStream.sequential() may improve performance.
Parameters
predicate Predicate: a non-interfering, stateless predicate to apply to elements to determine the longest prefix of elements.

Returns
Stream<T> the new stream

toArray

Added in API level 24
public abstract Object[] toArray ()

Returns an array containing the elements of this stream.

This is a terminal operation.

Returns
Object[] an array, whose type is Object, containing the elements of this stream

toArray

Added in API level 24
public abstract A[] toArray (IntFunction<A[]> generator)

Returns an array containing the elements of this stream, using the provided generator function to allocate the returned array, as well as any additional arrays that might be required for a partitioned execution or for resizing.

This is a terminal operation.

API Note:
  • The generator function takes an integer, which is the size of the desired array, and produces an array of the desired size. This can be concisely expressed with an array constructor reference:
    Person[] men = people.stream()
                              .filter(p -> p.getGender() == MALE)
                              .toArray(Person[]::new);
     
Parameters
generator IntFunction: a function which produces a new array of the desired type and the provided length

Returns
A[] an array containing the elements in this stream

Throws
ArrayStoreException if the runtime type of any element of this stream is not assignable to the runtime component type of the generated array

toList

Added in API level 34
public List<T> toList ()

Accumulates the elements of this stream into a List. The elements in the list will be in this stream's encounter order, if one exists. The returned List is unmodifiable; calls to any mutator method will always cause UnsupportedOperationException to be thrown. There are no guarantees on the implementation type or serializability of the returned List.

The returned instance may be value-based. Callers should make no assumptions about the identity of the returned instances. Identity-sensitive operations on these instances (reference equality (==), identity hash code, and synchronization) are unreliable and should be avoided.

This is a terminal operation.

API Note:
Implementation Requirements:
  • The implementation in this interface returns a List produced as if by the following:
    Collections.unmodifiableList(new ArrayList<>(Arrays.asList(this.toArray())))
     
Implementation Note:
  • Most instances of Stream will override this method and provide an implementation that is highly optimized compared to the implementation in this interface.
Returns
List<T> a List containing the stream elements