التغييرات في السلوك: التطبيقات التي تستهدف الإصدار 15 Android أو الإصدارات الأحدث

كما هو الحال في الإصدارات السابقة، يشمل نظام التشغيل Android 15 تغييرات في السلوك قد تؤثر في تطبيقك. تنطبق التغييرات التالية في السلوك حصريًا على التطبيقات التي تستهدف الإصدار 15 من نظام التشغيل Android أو الإصدارات الأحدث. إذا كان تطبيقك يستهدف الإصدار 15 من نظام التشغيل Android أو الإصدارات الأحدث، عليك تعديل تطبيقك لتفعيل هذه السلوكيات بشكلٍ سليم، حيث ينطبق ذلك.

احرص أيضًا على مراجعة قائمة التغييرات في السلوك التي تؤثر في جميع التطبيقات التي تعمل بنظام التشغيل Android 15 بغض النظر عن targetSdkVersion تطبيقك.

الوظيفة الأساسية

يعمل Android 15 على تعديل الإمكانات الأساسية المتنوعة لنظام Android أو توسيعها.

التغييرات على الخدمات التي تعمل في المقدّمة

We are making the following changes to foreground services with Android 15.

• Data sync foreground service timeout behavior
• New media processing foreground service type
• Restrictions on BOOT_COMPLETED broadcast receivers launching foreground services
• Restrictions on starting foreground services while an app holds the SYSTEM_ALERT_WINDOW permission

Data sync foreground service timeout behavior

Android 15 introduces a new timeout behavior to dataSync for apps targeting Android 15 (API level 35) or higher. This behavior also applies to the new mediaProcessing foreground service type.

The system permits an app's dataSync services to run for a total of 6 hours in a 24-hour period, after which the system calls the running service's Service.onTimeout(int, int) method (introduced in Android 15). At this time, the service has a few seconds to call Service.stopSelf(). When Service.onTimeout() is called, the service is no longer considered a foreground service. If the service does not call Service.stopSelf(), the system throws an internal exception. The exception is logged in Logcat with the following message:

Fatal Exception: android.app.RemoteServiceException: "A foreground service of
type dataSync did not stop within its timeout: [component name]"

Note: The 6-hour time limit is shared by all of an app's dataSync foreground services. For example, if an app runs a dataSync service for four hours, then starts a different dataSync service, that second service will only be allowed to run for two hours. However, if the user brings the app to the foreground, the timer resets and the app has 6 hours available.

To avoid problems with this behavior change, you can do one or more of the following:

1. Have your service implement the new Service.onTimeout(int, int) method. When your app receives the callback, make sure to call stopSelf() within a few seconds. (If you don't stop the app right away, the system generates a failure.)
2. Make sure your app's dataSync services don't run for more than a total of 6 hours in any 24-hour period (unless the user interacts with the app, resetting the timer).
3. Only start dataSync foreground services as a result of direct user interaction; since your app is in the foreground when the service starts, your service has the full six hours after the app goes to the background.
4. Instead of using a dataSync foreground service, use an alternative API.

If your app's dataSync foreground services have run for 6 hours in the last 24, you cannot start another dataSync foreground service unless the user has brought your app to the foreground (which resets the timer). If you try to start another dataSync foreground service, the system throws ForegroundServiceStartNotAllowedException with an error message like "Time limit already exhausted for foreground service type dataSync".

Testing

To test your app's behavior, you can enable data sync timeouts even if your app is not targeting Android 15 (as long as the app is running on an Android 15 device). To enable timeouts, run the following adb command:

adb shell am compat enable FGS_INTRODUCE_TIME_LIMITS your-package-name

You can also adjust the timeout period, to make it easier to test how your app behaves when the limit is reached. To set a new timeout period, run the following adb command:

adb shell device_config put activity_manager data_sync_fgs_timeout_duration duration-in-milliseconds

New media processing foreground service type

Android 15 introduces a new foreground service type, mediaProcessing. This service type is appropriate for operations like transcoding media files. For example, a media app might download an audio file and need to convert it to a different format before playing it. You can use a mediaProcessing foreground service to make sure the conversion continues even while the app is in the background.

The system permits an app's mediaProcessing services to run for a total of 6 hours in a 24-hour period, after which the system calls the running service's Service.onTimeout(int, int) method (introduced in Android 15). At this time, the service has a few seconds to call Service.stopSelf(). If the service does not call Service.stopSelf(), the system throws an internal exception. The exception is logged in Logcat with the following message:

Fatal Exception: android.app.RemoteServiceException: "A foreground service of
type mediaProcessing did not stop within its timeout: [component name]"

Note: The 6-hour time limit is shared by all of an app's mediaProcessing foreground services. For example, if an app runs a mediaProcessing service for four hours, then starts a different mediaProcessing service, that second service will only be allowed to run for two hours. However, if the user brings the app to the foreground, the timer resets and the app has 6 hours available.

To avoid having the exception, you can do one of the following:

1. Have your service implement the new Service.onTimeout(int, int) method. When your app receives the callback, make sure to call stopSelf() within a few seconds. (If you don't stop the app right away, the system generates a failure.)
2. Make sure your app's mediaProcessing services don't run for more than a total of 6 hours in any 24-hour period (unless the user interacts with the app, resetting the timer).
3. Only start mediaProcessing foreground services as a result of direct user interaction; since your app is in the foreground when the service starts, your service has the full six hours after the app goes to the background.
4. Instead of using a mediaProcessing foreground service, use an alternative API, like WorkManager.

If your app's mediaProcessing foreground services have run for 6 hours in the last 24, you cannot start another mediaProcessing foreground service unless the user has brought your app to the foreground (which resets the timer). If you try to start another mediaProcessing foreground service, the system throws ForegroundServiceStartNotAllowedException with an error message like "Time limit already exhausted for foreground service type mediaProcessing".

For more information about the mediaProcessing service type, see Changes to foreground service types for Android 15: Media processing.

Testing

To test your app's behavior, you can enable media processing timeouts even if your app is not targeting Android 15 (as long as the app is running on an Android 15 device). To enable timeouts, run the following adb command:

adb shell am compat enable FGS_INTRODUCE_TIME_LIMITS your-package-name

You can also adjust the timeout period, to make it easier to test how your app behaves when the limit is reached. To set a new timeout period, run the following adb command:

adb shell device_config put activity_manager media_processing_fgs_timeout_duration duration-in-milliseconds

Restrictions on BOOT_COMPLETED broadcast receivers launching foreground services

هناك قيود جديدة على إطلاق أجهزة استقبال بث BOOT_COMPLETED. والخدمات التي تعمل في المقدّمة. لا يُسمح لأجهزة استقبال BOOT_COMPLETED بتشغيل الأنواع التالية من الخدمات التي تعمل في المقدّمة:

• dataSync
• camera
• mediaPlayback
• phoneCall
• mediaProjection
• microphone (تم فرض هذا التقييد على microphone منذ بدء استخدام الإصدار 14 من نظام التشغيل Android)

إذا حاول مستقبل BOOT_COMPLETED بدء أيّ من هذه الأنواع من الخدمات التي تعمل في المقدّمة، يُرسِل النظام الخطأ ForegroundServiceStartNotAllowedException.

الاختبار

لاختبار سلوك تطبيقك، يمكنك تفعيل هذه القيود الجديدة حتى إذا كان تطبيقك لا يستهدف الإصدار 15 من Android (ما دام التطبيق يعمل على جهاز يعمل بالإصدار 15 من Android). شغِّل الأمر adb التالي:

adb shell am compat enable FGS_BOOT_COMPLETED_RESTRICTIONS your-package-name

لإرسال بث BOOT_COMPLETED بدون إعادة تشغيل الجهاز، يُرجى اتّباع الخطوات التالية: شغِّل الأمر adb التالي:

adb shell am broadcast -a android.intent.action.BOOT_COMPLETED your-package-name

Restrictions on starting foreground services while an app holds the SYSTEM_ALERT_WINDOW permission

以前，如果应用拥有 SYSTEM_ALERT_WINDOW 权限，即使应用当前在后台运行，也可以启动前台服务（如免于后台启动限制中所述）。

如果应用以 Android 15 为目标平台，则此豁免范围现在更窄。现在，应用需要具有 SYSTEM_ALERT_WINDOW 权限，并且还需要有一个可见的叠加窗口。也就是说，应用需要先启动 TYPE_APPLICATION_OVERLAY 窗口，并且该窗口需要处于可见状态，然后您才能启动前台服务。

如果您的应用尝试从后台启动前台服务，但不符合这些新要求（并且没有其他豁免情况），系统会抛出 ForegroundServiceStartNotAllowedException。

如果您的应用声明了 SYSTEM_ALERT_WINDOW 权限并从后台启动前台服务，则可能会受到此变更的影响。如果您的应用获得了 ForegroundServiceStartNotAllowedException，请检查应用的操作顺序，并确保应用在尝试从后台启动前台服务之前已具有有效的叠加层窗口。您可以通过调用 View.getWindowVisibility() 检查叠加层窗口当前是否可见，也可以替换 View.onWindowVisibilityChanged()，以便在可见性发生变化时收到通知。

测试

如需测试应用的行为，您可以启用这些新限制，即使您的应用并未以 Android 15 为目标平台（只要应用在 Android 15 设备上运行）也是如此。如需针对从后台启动前台服务启用这些新限制，请运行以下 adb 命令：

adb shell am compat enable FGS_SAW_RESTRICTIONS your-package-name

تغييرات على الوقت الذي يمكن للتطبيقات فيه تعديل الحالة العامة لوضع "عدم الإزعاج"

Apps that target Android 15 (API level 35) and higher can no longer change the global state or policy of Do Not Disturb (DND) on a device (either by modifying user settings, or turning off DND mode). Instead, apps must contribute an AutomaticZenRule, which the system combines into a global policy with the existing most-restrictive-policy-wins scheme. Calls to existing APIs that previously affected global state (setInterruptionFilter, setNotificationPolicy) result in the creation or update of an implicit AutomaticZenRule, which is toggled on and off depending on the call-cycle of those API calls.

Note that this change only affects observable behavior if the app is calling setInterruptionFilter(INTERRUPTION_FILTER_ALL) and expects that call to deactivate an AutomaticZenRule that was previously activated by their owners.

التغييرات في واجهة برمجة التطبيقات OpenJDK

Android 15 continues the work of refreshing Android's core libraries to align with the features in the latest OpenJDK LTS releases.

Some of these changes can affect app compatibility for apps targeting Android 15 (API level 35):

• Changes to string formatting APIs: Validation of argument index, flags, width, and precision are now more strict when using the following String.format() and Formatter.format() APIs:

  • String.format(String, Object[])
  • String.format(Locale, String, Object[])
  • Formatter.format(String, Object[])
  • Formatter.format(Locale, String, Object[])

  For example, the following exception is thrown when an argument index of 0 is used (%0 in the format string):

  IllegalFormatArgumentIndexException: Illegal format argument index = 0
  

  In this case, the issue can be fixed by using an argument index of 1 (%1 in the format string).

• Changes to component type of Arrays.asList(...).toArray(): When using Arrays.asList(...).toArray(), the component type of the resulting array is now an Object—not the type of the underlying array's elements. So the following code throws a ClassCastException:

  String[] elements = (String[]) Arrays.asList("one", "two").toArray();
  

  For this case, to preserve String as the component type in the resulting array, you could use Collection.toArray(Object[]) instead:

  String[] elements = Arrays.asList("two", "one").toArray(new String[0]);
  

• Changes to language code handling: When using the Locale API, language codes for Hebrew, Yiddish, and Indonesian are no longer converted to their obsolete forms (Hebrew: iw, Yiddish: ji, and Indonesian: in). When specifying the language code for one of these locales, use the codes from ISO 639-1 instead (Hebrew: he, Yiddish: yi, and Indonesian: id).

• Changes to random int sequences: Following the changes made in https://bugs.openjdk.org/browse/JDK-8301574, the following Random.ints() methods now return a different sequence of numbers than the Random.nextInt() methods do:

  • Random.ints(long)
  • Random.ints(long, int, int)
  • Random.ints(int, int)
  • Random.ints()

  Generally, this change shouldn't result in app-breaking behavior, but your code shouldn't expect the sequence generated from Random.ints() methods to match Random.nextInt().

The new SequencedCollection API can affect your app's compatibility after you update compileSdk in your app's build configuration to use Android 15 (API level 35):

• Collision with MutableList.removeFirst() and MutableList.removeLast() extension functions in kotlin-stdlib

  The List type in Java is mapped to the MutableList type in Kotlin. Because the List.removeFirst() and List.removeLast() APIs have been introduced in Android 15 (API level 35), the Kotlin compiler resolves function calls, for example list.removeFirst(), statically to the new List APIs instead of to the extension functions in kotlin-stdlib.

  If an app is re-compiled with compileSdk set to 35 and minSdk set to 34 or lower, and then the app is run on Android 14 and lower, a runtime error is thrown:

  java.lang.NoSuchMethodError: No virtual method
  removeFirst()Ljava/lang/Object; in class Ljava/util/ArrayList;
  

  The existing NewApi lint option in Android Gradle Plugin can catch these new API usages.

  ./gradlew lint
  
  MainActivity.kt:41: Error: Call requires API level 35 (current min is 34): java.util.List#removeFirst [NewApi]
        list.removeFirst()
  

  To fix the runtime exception and lint errors, the removeFirst() and removeLast() function calls can be replaced with removeAt(0) and removeAt(list.lastIndex) respectively in Kotlin. If you're using Android Studio Ladybug | 2024.1.3 or higher, it also provides a quick fix option for these errors.

  Consider removing @SuppressLint("NewApi") and lintOptions { disable 'NewApi' } if the lint option has been disabled.

• Collision with other methods in Java

  New methods have been added into the existing types, for example, List and Deque. These new methods might not be compatible with the methods with the same name and argument types in other interfaces and classes. In the case of a method signature collision with incompatibility, the javac compiler outputs a build-time error. For example:

  Example error 1:

  javac MyList.java
  
  MyList.java:135: error: removeLast() in MyList cannot implement removeLast() in List
    public void removeLast() {
                ^
    return type void is not compatible with Object
    where E is a type-variable:
      E extends Object declared in interface List
  

  Example error 2:

  javac MyList.java
  
  MyList.java:7: error: types Deque<Object> and List<Object> are incompatible;
  public class MyList implements  List<Object>, Deque<Object> {
    both define reversed(), but with unrelated return types
  1 error
  

  Example error 3:

  javac MyList.java
  
  MyList.java:43: error: types List<E#1> and MyInterface<E#2> are incompatible;
  public static class MyList implements List<Object>, MyInterface<Object> {
    class MyList inherits unrelated defaults for getFirst() from types List and MyInterface
    where E#1,E#2 are type-variables:
      E#1 extends Object declared in interface List
      E#2 extends Object declared in interface MyInterface
  1 error
  

  To fix these build errors, the class implementing these interfaces should override the method with a compatible return type. For example:

  @Override
  public Object getFirst() {
      return List.super.getFirst();
  }
  

الأمان

يتضمّن Android 15 تغييرات تعزّز أمان النظام للمساعدة في حماية التطبيقات والمستخدمين من التطبيقات الضارّة.

بدء الأنشطة الآمنة في الخلفية

Android 15 protects users from malicious apps and gives them more control over their devices by adding changes that prevent malicious background apps from bringing other apps to the foreground, elevating their privileges, and abusing user interaction. Background activity launches have been restricted since Android 10 (API level 29).

Other changes

In addition to the restriction for UID matching, these other changes are also included:

• Change PendingIntent creators to block background activity launches by default. This helps prevent apps from accidentally creating a PendingIntent that could be abused by malicious actors.
• Don't bring an app to the foreground unless the PendingIntent sender allows it. This change aims to prevent malicious apps from abusing the ability to start activities in the background. By default, apps are not allowed to bring the task stack to the foreground unless the creator allows background activity launch privileges or the sender has background activity launch privileges.
• Control how the top activity of a task stack can finish its task. If the top activity finishes a task, Android will go back to whichever task was last active. Moreover, if a non-top activity finishes its task, Android will go back to the home screen; it won't block the finish of this non-top activity.
• Prevent launching arbitrary activities from other apps into your own task. This change prevents malicious apps from phishing users by creating activities that appear to be from other apps.
• Block non-visible windows from being considered for background activity launches. This helps prevent malicious apps from abusing background activity launches to display unwanted or malicious content to users.

نوايا أكثر أمانًا

Android 15 引入了新的可选安全措施，以提高 intent 的安全性和稳健性。这些变更旨在防止潜在的漏洞以及恶意应用可能利用的 intent 滥用行为。Android 15 对 intent 的安全性进行了两项主要改进：

• 与目标 intent 过滤器匹配：定位到特定组件的 intent 必须与目标的 intent 过滤器规范完全匹配。如果您发送 intent 来启动其他应用的 activity，目标 intent 组件需要与接收 activity 声明的 intent 过滤器保持一致。
• intent 必须具有操作：没有操作的 intent 将不再与任何 intent 过滤器匹配。这意味着，用于启动 activity 或服务的 intent 必须具有明确定义的操作。

重要提示：PendingIntent 充当标准 Intent 的封装容器，因此这些安全措施适用于 PendingIntent 中包含的 Intent。

如需检查您的应用对这些更改的响应方式，请在应用中使用 StrictMode。如需查看有关 Intent 使用违规行为的详细日志，请添加以下方法：

Kotlin

fun onCreate() {
    StrictMode.setVmPolicy(VmPolicy.Builder()
        .detectUnsafeIntentLaunch()
        .build()
    )
}

Java

public void onCreate() {
    StrictMode.setVmPolicy(new VmPolicy.Builder()
            .detectUnsafeIntentLaunch()
            .build());
}

تجربة المستخدم وواجهة المستخدم للنظام

يتضمّن Android 15 بعض التغييرات التي تهدف إلى توفير تجربة مستخدم أكثر اتساقًا وبساطة.

تغييرات في مساحة النافذة

هناك تغييران متعلّقان بمساحات النوافذ الداخلية في Android 15: يتم فرض استخدام جميع النوافذ بشكلٍ تلقائي، كما أنّ هناك تغييرات في الإعدادات، مثل الإعدادات التلقائية لأشرطة النظام.

Edge-to-edge enforcement

Apps are edge-to-edge by default on devices running Android 15 if the app is targeting Android 15 (API level 35).

Important: If your app is not already edge-to-edge, portions of your app may be obscured and you must handle insets. Depending on the app, this work may or may not be significant. The Material 3 Scaffold component can reduce the work required to be compatible with the Android 15 edge-to-edge enforcement.

An app that targets Android 14 and is not edge-to-edge on an Android 15 device.

An app that targets Android 15 (API level 35) and is edge-to-edge on an Android 15 device. This app mostly uses Material 3 Compose Components that automatically apply insets. This screen is not negatively impacted by the Android 15 edge-to-edge enforcement.

This is a breaking change that might negatively impact your app's UI. The changes affect the following UI areas:

• Gesture handle navigation bar
  • Transparent by default.
  • Bottom offset is disabled so content draws behind the system navigation bar unless insets are applied.
  • setNavigationBarColor and R.attr#navigationBarColor are deprecated and don't affect gesture navigation.
  • setNavigationBarContrastEnforced and R.attr#navigationBarContrastEnforced continue to have no effect on gesture navigation.
• 3-button navigation
  • Opacity set to 80% by default, with color possibly matching the window background.
  • Bottom offset disabled so content draws behind the system navigation bar unless insets are applied.
  • setNavigationBarColor and R.attr#navigationBarColor are set to match the window background by default. The window background must be a color drawable for this default to apply. This API is deprecated but continues to affect 3-button navigation.
  • setNavigationBarContrastEnforced and R.attr#navigationBarContrastEnforced is true by default, which adds an 80% opaque background across 3-button navigation.
• Status bar
  • Transparent by default.
  • The top offset is disabled so content draws behind the status bar unless insets are applied.
  • setStatusBarColor and R.attr#statusBarColor are deprecated and have no effect on Android 15.
  • setStatusBarContrastEnforced and R.attr#statusBarContrastEnforced are deprecated but still have an effect on Android 15.
• Display cutout
  • layoutInDisplayCutoutMode of non-floating windows must be LAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS. SHORT_EDGES, NEVER, and DEFAULT are interpreted as ALWAYS so that users don't see a black bar caused by the display cutout and appear edge-to-edge.

The following example shows an app before and after targeting Android 15 (API level 35), and before and after applying insets.

An app that targets Android 14 and is not edge-to-edge on an Android 15 device.

An app that targets Android 15 (API level 35) and is edge-to-edge on an Android 15 device. However, many elements are now hidden by the status bar, 3-button navigation bar, or display cutout due to the Android 15 edge-to-edge enforcements. Hidden UI includes the Material 2 top app bar, floating action buttons, and list items.

An app that targets Android 15 (API level 35), is edge to edge on an Android 15 device and applies insets so that UI is not hidden.

What to check if your app is already edge-to-edge

If your app is already edge-to-edge and applies insets, you are mostly unimpacted, except in the following scenarios. However, even if you think you aren't impacted, we recommend you test your app.

• You have a non-floating window, such as an Activity that uses SHORT_EDGES, NEVER or DEFAULT instead of LAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS. If your app crashes on launch, this might be due to your splashscreen. You can either upgrade the core splashscreen dependency to 1.2.0-alpha01 or later or set window.attributes.layoutInDisplayCutoutMode = WindowManager.LayoutInDisplayCutoutMode.always.
• There might be lower-traffic screens with occluded UI. Verify these less-visited screens don't have occluded UI. Lower-traffic screens include:
  • Onboarding or sign-in screens
  • Settings pages

What to check if your app is not already edge-to-edge

If your app is not already edge-to-edge, you are most likely impacted. In addition to the scenarios for apps that are already edge-to-edge, you should consider the following:

• If your app uses Material 3 Components ( androidx.compose.material3) in compose, such as TopAppBar, BottomAppBar, and NavigationBar, these components are likely not impacted because they automatically handle insets.
• If your app is using Material 2 Components ( androidx.compose.material) in Compose, these components don't automatically handle insets. However, you can get access to the insets and apply them manually. In androidx.compose.material 1.6.0 and later, use the windowInsets parameter to apply the insets manually for BottomAppBar, TopAppBar, BottomNavigation, and NavigationRail. Likewise, use the contentWindowInsets parameter for Scaffold.
• If your app uses views and Material Components (com.google.android.material), most views-based Material Components such as BottomNavigationView, BottomAppBar, NavigationRailView, or NavigationView, handle insets and require no additional work. However, you need to add android:fitsSystemWindows="true" if using AppBarLayout.
• For custom composables, apply the insets manually as padding. If your content is within a Scaffold, you can consume insets using the Scaffold padding values. Otherwise, apply padding using one of the WindowInsets.
• If your app is using views and BottomSheet, SideSheet or custom containers, apply padding using ViewCompat.setOnApplyWindowInsetsListener. For RecyclerView, apply padding using this listener and also add clipToPadding="false".

What to check if your app must offer custom background protection

If your app must offer custom background protection to 3-button navigation or the status bar, your app should place a composable or view behind the system bar using WindowInsets.Type#tappableElement() to get the 3-button navigation bar height or WindowInsets.Type#statusBars.

Additional edge-to-edge resources

See the Edge to Edge Views and Edge to Edge Compose guides for additional considerations on applying insets.

Deprecated APIs

The following APIs are deprecated but not disabled:

• R.attr#enforceStatusBarContrast
• R.attr#navigationBarColor (for 3 button navigation, with 80% alpha)
• Window#isStatusBarContrastEnforced
• Window#setNavigationBarColor (for 3 button navigation, with 80% alpha)
• Window#setStatusBarContrastEnforced

The following APIs are deprecated and disabled:

• R.attr#navigationBarColor (for gesture navigation)
• R.attr#navigationBarDividerColor
• R.attr#statusBarColor
• Window#setDecorFitsSystemWindows
• Window#getNavigationBarColor
• Window#getNavigationBarDividerColor
• Window#getStatusBarColor
• Window#setNavigationBarColor (for gesture navigation)
• Window#setNavigationBarDividerColor
• Window#setStatusBarColor

Stable configuration

إذا كان تطبيقك يستهدف الإصدار 15 من نظام التشغيل Android (المستوى 35 لواجهة برمجة التطبيقات) أو الإصدارات الأحدث، لن يتم Configuration استبعاد أشرطة النظام بعد الآن. إذا كنت تستخدم حجم الشاشة في الفئة Configuration لاحتساب التنسيق، عليك استبدالها ببدائل أفضل مثل ViewGroup أو WindowInsets أو WindowMetricsCalculator مناسبَين حسب حاجتك.

تتوفر Configuration منذ الإصدار 1 من واجهة برمجة التطبيقات. يتم الحصول عليه عادةً من Activity.onConfigurationChanged. ويقدّم معلومات مثل كثافة النوافذ ومقدار التمويه والأحجام. من الخصائص المهمة لأحجام النوافذ المعروضة من Configuration أنّها كانت تستبعد في السابق أشرطة النظام.

يتم استخدام حجم الإعدادات عادةً لاختيار الموارد، مثل /res/layout-h500dp، ولا يزال هذا الاستخدام صالحًا. ومع ذلك، لم يُنصح أبدًا باستخدامه في حساب التنسيق. إذا قمت بذلك، يجب عليك الابتعاد عنه الآن. وعليك استبدال استخدام Configuration بشيء أكثر ملاءمة حسب حالة استخدامك.

إذا كنت تستخدمها لاحتساب التنسيق، استخدِم ViewGroup مناسبًا، مثل CoordinatorLayout أو ConstraintLayout. وإذا كنت تستخدمه لتحديد ارتفاع شريط تنقل النظام، استخدِم WindowInsets. إذا أردت معرفة الحجم الحالي لنافذة تطبيقك، استخدِم computeCurrentWindowMetrics.

توضّح القائمة التالية الحقول المتأثرة بهذا التغيير:

• لم يعُد حجما Configuration.screenWidthDp وscreenHeightDp يستبعدان أشرطة النظام.
• يتأثّر Configuration.smallestScreenWidthDp بشكل غير مباشر بالتغييرات في screenWidthDp وscreenHeightDp.
• يتأثر Configuration.orientation بشكل غير مباشر بالتغييرات التي تطرأ على screenWidthDp وscreenHeightDp على الأجهزة القريبة من المربّع.
• يتأثر Display.getSize(Point) بشكل غير مباشر بالتغييرات في Configuration. وتم إيقاف هذه الميزة نهائيًا اعتبارًا من المستوى 30 لواجهة برمجة التطبيقات.
• كان تطبيق Display.getMetrics() يعمل بهذه الطريقة منذ المستوى 33 لواجهة برمجة التطبيقات.

القيمة التلقائية لسمة elegantTextHeight هي true

For apps targeting Android 15 (API level 35), the elegantTextHeight TextView attribute becomes true by default, replacing the compact font used by default with some scripts that have large vertical metrics with one that is much more readable. The compact font was introduced to prevent breaking layouts; Android 13 (API level 33) prevents many of these breakages by allowing the text layout to stretch the vertical height utilizing the fallbackLineSpacing attribute.

In Android 15, the compact font still remains in the system, so your app can set elegantTextHeight to false to get the same behavior as before, but it is unlikely to be supported in upcoming releases. So, if your app supports the following scripts: Arabic, Lao, Myanmar, Tamil, Gujarati, Kannada, Malayalam, Odia, Telugu or Thai, test your app by setting elegantTextHeight to true.

elegantTextHeight behavior for apps targeting Android 14 (API level 34) and lower.

elegantTextHeight behavior for apps targeting Android 15.

تغييرات في عرض TextView لأشكال الأحرف المعقّدة

In previous versions of Android, some cursive fonts or languages that have complex shaping might draw the letters in the previous or next character's area. In some cases, such letters were clipped at the beginning or ending position. Starting in Android 15, a TextView allocates width for drawing enough space for such letters and allows apps to request extra paddings to the left to prevent clipping.

Because this change affects how a TextView decides the width, TextView allocates more width by default if the app targets Android 15 (API level 35) or higher. You can enable or disable this behavior by calling the setUseBoundsForWidth API on TextView.

Because adding left padding might cause a misalignment for existing layouts, the padding is not added by default even for apps that target Android 15 or higher. However, you can add extra padding to preventing clipping by calling setShiftDrawingOffsetForStartOverhang.

The following examples show how these changes can improve text layout for some fonts and languages.

Standard layout for English text in a cursive font. Some of the letters are clipped. Here is the corresponding XML:

<TextView
    android:fontFamily="cursive"
    android:text="java" />

Layout for the same English text with additional width and padding. Here is the corresponding XML:

<TextView
    android:fontFamily="cursive"
    android:text="java"
    android:useBoundsForWidth="true"
    android:shiftDrawingOffsetForStartOverhang="true" />

Standard layout for Thai text. Some of the letters are clipped. Here is the corresponding XML:

<TextView
    android:text="คอมพิวเตอร์" />

Layout for the same Thai text with additional width and padding. Here is the corresponding XML:

<TextView
    android:text="คอมพิวเตอร์"
    android:useBoundsForWidth="true"
    android:shiftDrawingOffsetForStartOverhang="true" />

ارتفاع السطر التلقائي المراعي للّغة في EditText

In previous versions of Android, the text layout stretched the height of the text to meet the line height of the font that matched the current locale. For example, if the content was in Japanese, because the line height of the Japanese font is slightly larger than the one of a Latin font, the height of the text became slightly larger. However, despite these differences in line heights, the EditText element was sized uniformly, regardless of the locale being used, as illustrated in the following image:

Three boxes representing EditText elements that can contain text from English (en), Japanese (ja), and Burmese (my). The height of the EditText is the same, even though these languages have different line heights from each other.

For apps targeting Android 15 (API level 35), a minimum line height is now reserved for EditText to match the reference font for the specified Locale, as shown in the following image:

Three boxes representing EditText elements that can contain text from English (en), Japanese (ja), and Burmese (my). The height of the EditText now includes space to accommodate the default line height for these languages' fonts.

If needed, your app can restore the previous behavior by specifying the useLocalePreferredLineHeightForMinimum attribute to false, and your app can set custom minimum vertical metrics using the setMinimumFontMetrics API in Kotlin and Java.

الكاميرا والوسائط

يُجري نظام Android 15 التغييرات التالية على سلوك الكاميرا والوسائط للتطبيقات التي تستهدف الإصدار 15 من Android أو الإصدارات الأحدث.

القيود المفروضة على طلب تركيز الصوت

Apps that target Android 15 (API level 35) must be the top app or running a foreground service in order to request audio focus. If an app attempts to request focus when it does not meet one of these requirements, the call returns AUDIOFOCUS_REQUEST_FAILED.

You can learn more about audio focus at Manage audio focus.

قيود غير متاحة في حزمة SDK تم تعديلها

Android 15 includes updated lists of restricted non-SDK interfaces based on collaboration with Android developers and the latest internal testing. Whenever possible, we make sure that public alternatives are available before we restrict non-SDK interfaces.

If your app does not target Android 15, some of these changes might not immediately affect you. However, while it's possible for your app to access some non-SDK interfaces depending on your app's target API level, using any non-SDK method or field always carries a high risk of breaking your app.

If you are unsure if your app uses non-SDK interfaces, you can test your app to find out. If your app relies on non-SDK interfaces, you should begin planning a migration to SDK alternatives. Nevertheless, we understand that some apps have valid use cases for using non-SDK interfaces. If you can't find an alternative to using a non-SDK interface for a feature in your app, you should request a new public API.

To learn more about the changes in this release of Android, see Updates to non-SDK interface restrictions in Android 15. To learn more about non-SDK interfaces generally, see Restrictions on non-SDK interfaces.