이전 출시와 마찬가지로 Android 15에는 앱에 영향을 미칠 수 있는 동작 변경사항이 포함되어 있습니다. 다음 동작 변경사항은 Android 15 이상을 타겟팅하는 앱에만 적용됩니다. 앱이 Android 15 이상을 타겟팅한다면 이러한 동작을 올바르게 지원하도록 앱을 수정해야 합니다(해당하는 경우).
또한 앱의 targetSdkVersion
과 관계없이 Android 15에서 실행되는 모든 앱에 영향을 미치는 동작 변경사항 목록을 검토해야 합니다.
핵심 기능
Android 15는 Android 시스템의 다양한 핵심 기능을 수정하거나 확장합니다.
포그라운드 서비스 변경사항
We are making the following changes to foreground services with Android 15.
- New media processing foreground service type
- Restrictions on
BOOT_COMPLETED
broadcast receivers launching foreground services
Data sync foreground service timeout behavior
Android 15 针对以目标平台为目标平台的应用为 dataSync
引入了新的超时行为
Android 15 或更高版本。这一行为也适用于新的 mediaProcessing
前台服务类型。
系统允许应用的 dataSync
服务总共运行 6 小时
之后,系统会调用正在运行的服务的
Service.onTimeout(int, int)
方法(在 Android 中引入)
15)。此时,服务有几秒钟的时间来调用
Service.stopSelf()
.调用 Service.onTimeout()
时,
服务不再被视为前台服务。如果该服务没有
调用 Service.stopSelf()
时,系统会抛出内部异常。通过
Logcat 中会记录以下异常:
Fatal Exception: android.app.RemoteServiceException: "A foreground service of
type dataSync did not stop within its timeout: [component name]"
为避免这种行为变更出现问题,您可以执行下列一项或多项操作 以下:
- 让您的服务实现新的
Service.onTimeout(int, int)
方法。 当您的应用收到回调时,请务必在stopSelf()
几秒。(如果您不立即停止应用,则系统会生成 失败。) - 确保应用的
dataSync
服务运行的总时间不超过 在任何 24 小时内为 6 小时(除非用户与应用互动; 重置计时器)。 - 仅在用户执行直接操作后启动
dataSync
项前台服务 互动;由于服务启动时您的应用位于前台 您的服务在应用转入后台后的完整运行 6 小时。 - 请不要使用
dataSync
前台服务,而应使用 替代 API。
如果您的应用的 dataSync
前台服务在过去 6 小时内运行过
24,除非用户dataSync
已将您的应用调到前台(这会重置计时器)。如果您尝试
启动另一个 dataSync
前台服务时,系统会抛出
ForegroundServiceStartNotAllowedException
并显示类似“前台服务的时限已用尽”的错误消息
type dataSync”。
测试
如需测试应用的行为,您可以启用数据同步超时(即使应用也是如此)
未以 Android 15 为目标平台(只要应用在 Android 15 上运行即可)
设备)。如需启用超时功能,请运行以下 adb
命令:
adb shell am compat enable FGS_INTRODUCE_TIME_LIMITS your-package-name
您还可以调整超时期限,以便更轻松地测试
在达到该限制时,应用的行为。要设置新的超时期限,请运行
以下 adb
命令:
adb shell device_config put activity_manager data_sync_fgs_timeout_duration duration-in-milliseconds
New media processing foreground service type
Android 15 引入了一种新的前台服务类型,即 mediaProcessing
。此服务类型适用于对媒体文件进行转码等操作。例如,媒体应用可能会下载音频文件,并需要将其转换为其他格式才能播放。您可以使用 mediaProcessing
前台服务,确保即使应用在后台运行时转换也会继续。
系统允许应用的 mediaProcessing
服务在 24 小时内共运行 6 小时,之后系统会调用正在运行的服务的 Service.onTimeout(int, int)
方法(在 Android 15 中引入)。此时,该服务有几秒钟时间来调用 Service.stopSelf()
。如果服务未调用 Service.stopSelf()
,系统会抛出内部异常。系统会在 Logcat 中记录异常,并显示以下消息:
Fatal Exception: android.app.RemoteServiceException: "A foreground service of
type mediaProcessing did not stop within its timeout: [component name]"
为避免出现异常,您可以执行以下操作之一:
- 让您的服务实现新的
Service.onTimeout(int, int)
方法。当应用收到回调时,请务必在几秒钟内调用stopSelf()
。(如果您不立即停止应用,系统会生成故障。) - 确保应用的
mediaProcessing
服务在任何 24 小时内的运行时间都不超过 6 小时(除非用户与应用互动并重置计时器)。 - 仅通过直接的用户互动来启动
mediaProcessing
前台服务;由于您的应用在服务启动时位于前台,因此服务会在应用进入后台后的 6 小时内完整运行。 - 请使用替代 API(例如 WorkManager),而不是使用
mediaProcessing
前台服务。
如果您的应用的 mediaProcessing
前台服务在过去 24 天内运行了 6 个小时,除非用户将您的应用调到前台(这会重置计时器),否则您无法启动其他 mediaProcessing
前台服务。如果您尝试启动另一个 mediaProcessing
前台服务,系统会抛出 ForegroundServiceStartNotAllowedException
,并显示类似“Time limit already exhausted for the service type mediaProcessing”之类的错误消息。
如需详细了解 mediaProcessing
服务类型,请参阅 Android 15 前台服务类型的变更:媒体处理。
测试
如需测试应用的行为,即使您的应用并非以 Android 15 为目标平台(只要该应用在 Android 15 设备上运行),您也可以启用媒体处理超时。如需启用超时功能,请运行以下 adb
命令:
adb shell am compat enable FGS_INTRODUCE_TIME_LIMITS your-package-name
您还可以调整超时期限,更轻松地测试应用在达到此限制时的行为。如需设置新的超时期限,请运行以下 adb
命令:
adb shell device_config put activity_manager media_processing_fgs_timeout_duration duration-in-milliseconds
Restrictions on BOOT_COMPLETED
broadcast receivers launching foreground services
broadcast receiver BOOT_COMPLETED
개에 새로운 제한사항이 적용됩니다.
포그라운드 서비스 BOOT_COMPLETED
수신기에서 다음을 실행할 수 없습니다.
포그라운드 서비스는 다음과 같습니다.
dataSync
camera
mediaPlayback
phoneCall
mediaProjection
microphone
(이 제한은 이후microphone
부터 적용되었음 Android 14)
BOOT_COMPLETED
수신기가 이러한 유형의 포그라운드를 실행하려고 하는 경우
시스템에서 ForegroundServiceStartNotAllowedException
을 발생시킵니다.
테스트
앱의 동작을 테스트하기 위해
앱이 Android 15를 타겟팅하지 않음 (앱이 Android 15
기기). 다음 adb
명령어를 실행합니다.
adb shell am compat enable FGS_BOOT_COMPLETED_RESTRICTIONS your-package-name
기기를 다시 시작하지 않고 BOOT_COMPLETED
브로드캐스트를 전송하려면 다음 안내를 따르세요.
다음 adb
명령어를 실행합니다.
adb shell am broadcast -a android.intent.action.BOOT_COMPLETED your-package-name
Restrictions on starting foreground services while an app holds the SYSTEM_ALERT_WINDOW
permission
Previously, if an app held the SYSTEM_ALERT_WINDOW
permission, it could launch
a foreground service even if the app was currently in the background (as
discussed in exemptions from background start restrictions).
If an app targets Android 15, this exemption is now narrower. The app now needs
to have the SYSTEM_ALERT_WINDOW
permission and also have a visible overlay
window. That is, the app needs to first launch a
TYPE_APPLICATION_OVERLAY
window and the window
needs to be visible before you start a foreground service.
If your app attempts to start a foreground service from the background without
meeting these new requirements (and it does not have some other exemption), the
system throws ForegroundServiceStartNotAllowedException
.
If your app declares the SYSTEM_ALERT_WINDOW
permission
and launches foreground services from the background, it may be affected by this
change. If your app gets a ForegroundServiceStartNotAllowedException
, check
your app's order of operations and make sure your app already has an active
overlay window before it attempts to start a foreground service from the
background. You can check if your overlay window is currently visible
by calling View.getWindowVisibility()
, or you
can override View.onWindowVisibilityChanged()
to get notified whenever the visibility changes.
Testing
To test your app's behavior, you can enable these new restrictions even if your
app is not targeting Android 15 (as long as the app is running on an Android 15
device). To enable these new restrictions on starting foreground services
from the background, run the following adb
command:
adb shell am compat enable FGS_SAW_RESTRICTIONS your-package-name
앱이 방해 금지 모드의 전체 상태를 수정할 수 있는 경우에 대한 변경사항
Apps that target Android 15 can no longer change the global state or policy of
Do Not Disturb (DND) on a device (either by modifying user settings, or turning
off DND mode). Instead, apps must contribute an AutomaticZenRule
, which
the system combines into a global policy with the existing
most-restrictive-policy-wins scheme. Calls to existing APIs that previously
affected global state (setInterruptionFilter
,
setNotificationPolicy
) result in the creation or update of an
implicit AutomaticZenRule
, which is toggled on and off depending on the
call-cycle of those API calls.
Note that this change only affects observable behavior if the app is calling
setInterruptionFilter(INTERRUPTION_FILTER_ALL)
and expects that call to
deactivate an AutomaticZenRule
that was previously activated by their owners.
OpenJDK API 변경사항
Android 15 将继续更新 Android 的核心库, 最新 OpenJDK LTS 版本中的功能。
其中一些变更可能会影响应用定位的应用兼容性 Android 15(API 级别 35):
字符串格式设置 API 变更:验证参数索引、标志、 现在,使用
String.format()
和Formatter.format()
API:String.format(String, Object[])
String.format(Locale, String, Object[])
Formatter.format(String, Object[])
Formatter.format(Locale, String, Object[])
例如,当参数索引为 0 时,会抛出以下异常 (格式字符串中的
%0
):IllegalFormatArgumentIndexException: Illegal format argument index = 0
在这种情况下,可以使用参数索引为 1 (
%1
)。对
Arrays.asList(...).toArray()
组件类型的更改:使用Arrays.asList(...).toArray()
,则所得数组的组件类型为 现在是Object
,而不是底层数组元素的类型。因此, 以下代码会抛出ClassCastException
:String[] elements = (String[]) Arrays.asList("one", "two").toArray();
在本例中,在结果中将
String
保留为组件类型 数组,您可以改用Collection.toArray(Object[])
:String[] elements = Arrays.asList("two", "one").toArray(new String[0]);
语言代码处理方式变更:使用
Locale
API 时, 不再转换希伯来语、意第绪语和印度尼西亚语的语言代码 对应的过时形式(希伯来语:iw
、意第绪语:ji
和印度尼西亚语:in
)。 在为其中某个语言区域指定语言代码时,请使用代码 改为 ISO 639-1(希伯来语:he
,意第绪语:yi
,印度尼西亚语:id
)。对随机整数序列的更改: https://bugs.openjdk.org/browse/JDK-8301574,下面
Random.ints()
方法现在返回的数值序列与Random.nextInt()
方法的用途如下:一般来说,此变更不会导致应用中断行为,但您的 代码不应期望
Random.ints()
方法生成的序列 匹配Random.nextInt()
。
新的 SequencedCollection
API 可能会影响应用的兼容性
当您在应用的 build 配置中更新 compileSdk
以使用
Android 15(API 级别 35):
与
MutableList.removeFirst()
和kotlin-stdlib
中的MutableList.removeLast()
扩展函数Java 中的
List
类型会映射到 Kotlin 中的MutableList
类型。 由于使用List.removeFirst()
和List.removeLast()
API 已在 Android 15(API 级别 35)中引入,Kotlin 编译器 将函数调用(例如list.removeFirst()
)静态解析为 新的List
API,而不是对 API 中的扩展函数kotlin-stdlib
。重新编译应用时,如果
compileSdk
设为35
,并且minSdk
设为34
或更低版本,那么应用会在 Android 14 及更低版本(运行时)上运行 错误:java.lang.NoSuchMethodError: No virtual method removeFirst()Ljava/lang/Object; in class Ljava/util/ArrayList;
Android Gradle 插件中的现有
NewApi
lint 选项可以捕获这些 新的 API 用法。./gradlew lint
MainActivity.kt:41: Error: Call requires API level 35 (current min is 34): java.util.List#removeFirst [NewApi] list.removeFirst()如需修复运行时异常和 lint 错误,
removeFirst()
和removeLast()
函数调用可替换为removeAt(0)
,removeAt(list.lastIndex)
(在 Kotlin 中分别对应)。如果您使用的是 Android Studio Ladybug |2024.1.3 或更高版本,也提供快速修复 处理这些错误的选项如果 lint 选项已停用,请考虑移除
@SuppressLint("NewApi")
和lintOptions { disable 'NewApi' }
。与 Java 中的其他方法冲突
向现有类型中添加了新方法,例如,
List
和Deque
。这些新方法 其他接口中具有相同名称和参数类型的方法 和类。如果与 不兼容,javac
编译器会输出构建时错误。例如:错误 1 示例:
javac MyList.java
MyList.java:135: error: removeLast() in MyList cannot implement removeLast() in List public void removeLast() { ^ return type void is not compatible with Object where E is a type-variable: E extends Object declared in interface List错误 2 示例:
javac MyList.java
MyList.java:7: error: types Deque<Object> and List<Object> are incompatible; public class MyList implements List<Object>, Deque<Object> { both define reversed(), but with unrelated return types 1 error错误 3 示例:
javac MyList.java
MyList.java:43: error: types List<E#1> and MyInterface<E#2> are incompatible; public static class MyList implements List<Object>, MyInterface<Object> { class MyList inherits unrelated defaults for getFirst() from types List and MyInterface where E#1,E#2 are type-variables: E#1 extends Object declared in interface List E#2 extends Object declared in interface MyInterface 1 error要修复这些构建错误,实现这些接口的类应 使用兼容的返回值类型替换该方法。例如:
@Override public Object getFirst() { return List.super.getLast(); }
보안
Android 15에는 악성 앱으로부터 앱과 사용자를 보호할 수 있도록 시스템 보안을 촉진하는 변경사항이 포함되어 있습니다.
안전한 백그라운드 활동 실행
Android 15는 악성 백그라운드 앱이 다른 앱을 포그라운드로 가져오고 권한을 승격하며 사용자 상호작용을 악용하지 못하도록 하는 변경사항을 추가하여 악성 앱으로부터 사용자를 보호하고 사용자가 기기를 더 잘 제어할 수 있도록 합니다. 백그라운드 활동 실행은 Android 10 (API 수준 29)부터 제한되었습니다.
스택의 상단 UID와 일치하지 않는 앱이 활동을 실행하지 못하도록 차단
악성 앱은 동일한 작업 내에서 다른 앱의 활동을 실행한 다음 그 위에 오버레이되어 앱이 있는 것처럼 보이게 할 수 있습니다. 이 '작업 도용' 공격은 모두 동일한 작업 내에서 발생하므로 현재의 백그라운드 실행 제한을 우회합니다. 이러한 위험을 완화하기 위해 Android 15에서는 스택의 상단 UID와 일치하지 않는 앱이 활동을 실행하지 못하도록 차단하는 플래그를 추가합니다. 앱의 모든 활동을 선택하려면 다음과 같이 앱의 AndroidManifest.xml
파일에서 allowCrossUidActivitySwitchFromBelow
속성을 업데이트합니다.
<application android:allowCrossUidActivitySwitchFromBelow="false" >
새로운 보안 조치는 다음 조건을 모두 충족하는 경우 적용됩니다.
- 출시를 실행하는 앱이 Android 15를 타겟팅합니다.
- 작업 스택 위에 있는 앱은 Android 15를 타겟팅합니다.
- 눈에 보이는 모든 활동이 새로운 보호 조치를 선택했습니다.
보안 조치가 사용 설정된 경우, 앱이 자체 작업을 완료하면 마지막으로 표시된 앱이 아닌 홈으로 돌아갈 수 있습니다.
기타 변경사항
UID 매칭 제한 외에도 다음과 같은 다른 변경사항도 포함되어 있습니다.
- 기본적으로 백그라운드 활동 실행을 차단하도록
PendingIntent
생성자를 변경합니다. 이렇게 하면 앱에서 악의적인 행위자가 악용할 수 있는PendingIntent
를 실수로 만드는 것을 방지할 수 있습니다. PendingIntent
발신자가 허용하지 않는 한 앱을 포그라운드로 가져오지 않습니다. 이 변경사항은 악성 앱이 백그라운드에서 활동을 시작하는 기능을 악용하지 않도록 하기 위한 것입니다. 기본적으로 앱은 개발자가 백그라운드 활동 실행 권한을 허용하거나 발신자가 백그라운드 활동 실행 권한을 가지고 있지 않는 한 앱에서 작업 스택을 포그라운드로 가져올 수 없습니다.- 작업 스택의 상단 활동이 작업을 완료하는 방법을 제어합니다. 최상위 활동이 작업을 완료하면 Android는 마지막으로 활성 상태였던 작업으로 돌아갑니다. 또한 최상위가 아닌 활동이 작업을 완료하면 Android는 홈 화면으로 돌아갑니다. 또한 최상위가 아닌 활동의 종료를 차단하지 않습니다.
- 다른 앱의 임의 활동을 자체 작업으로 실행하는 것을 방지합니다. 이 변경사항으로 인해 다른 앱에서 전송된 것처럼 보이는 활동을 생성하여 악성 앱이 피싱 사용자로부터 피해를 입지 않도록 방지할 수 있습니다.
- 보이지 않는 창이 백그라운드 활동 실행에 고려되지 않도록 차단합니다. 이렇게 하면 악성 앱이 백그라운드 활동 실행을 악용하여 원치 않는 콘텐츠나 악성 콘텐츠를 사용자에게 표시하는 것을 방지할 수 있습니다.
더 안전한 인텐트
Android 15 introduces new security measures to make intents safer and more robust. These changes are aimed at preventing potential vulnerabilities and misuse of intents that can be exploited by malicious apps. There are two main improvements to the security of intents in Android 15:
- Match target intent-filters: Intents that target specific components must accurately match the target's intent-filter specifications. If you send an intent to launch another app's activity, the target intent component needs to align with the receiving activity's declared intent-filters.
- Intents must have actions: Intents without an action will no longer match any intent-filters. This means that intents used to start activities or services must have a clearly defined action.
- Pending intents: The creator of the pending intent is treated as the sender of the enclosing intent, not the sender of the pending intent
Kotlin
fun onCreate() { StrictMode.setVmPolicy(VmPolicy.Builder() .detectUnsafeIntentLaunch() .build() ) }
Java
public void onCreate() { StrictMode.setVmPolicy(new VmPolicy.Builder() .detectUnsafeIntentLaunch() .build()); }
사용자 환경 및 시스템 UI
Android 15에는 더 일관되고 직관적인 사용자 환경을 만들기 위한 몇 가지 변경사항이 포함되어 있습니다.
창 인셋 변경사항
Android 15의 창 인셋과 관련된 두 가지 변경사항이 있습니다. 에지 투 에지가 기본적으로 적용되고 시스템 표시줄의 기본 구성과 같은 구성 변경사항도 있습니다.
全面强制执行
在搭载 Android 15 的设备上,应用会默认采用全屏 以 Android 15(API 级别 35)为目标平台。
<ph type="x-smartling-placeholder">![](https://developer.android.google.cn/static/about/versions/15/images/edge-to-edge-1.png?authuser=9&hl=ko)
这是一项可能会对应用的界面产生负面影响的破坏性更改。通过 更改会影响以下界面区域:
- 手势手柄导航栏
<ph type="x-smartling-placeholder">
- </ph>
- 默认透明。
- 底部偏移量已停用,因此内容绘制在系统导航栏后面 栏。
setNavigationBarColor
和R.attr#navigationBarColor
已弃用,不会影响手势导航。setNavigationBarContrastEnforced
和R.attr#navigationBarContrastEnforced
不会对 手势导航。
- “三按钮”导航
<ph type="x-smartling-placeholder">
- </ph>
- 默认不透明度设为 80%,颜色可能与窗口一致 背景。
- 底部偏移值已停用,因此内容绘制在系统导航栏后面 除非应用了边衬区。
setNavigationBarColor
和R.attr#navigationBarColor
默认设置为与窗口背景匹配。窗口背景 必须是颜色可绘制对象,才能应用此默认值。此 API 是 但会继续影响“三按钮”导航。setNavigationBarContrastEnforced
和R.attr#navigationBarContrastEnforced
默认为 true,这会添加一个 “三按钮”导航模式显示 80% 不透明的背景。
- 状态栏
<ph type="x-smartling-placeholder">
- </ph>
- 默认透明。
- 顶部偏移量已停用,因此除非 边衬区。
setStatusBarColor
和R.attr#statusBarColor
已废弃,对 Android 15 没有任何影响。setStatusBarContrastEnforced
和R.attr#statusBarContrastEnforced
已弃用,但仍具有 对 Android 15 的影响。
- 刘海屏
<ph type="x-smartling-placeholder">
- </ph>
layoutInDisplayCutoutMode
的非浮动窗口必须是LAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS
.SHORT_EDGES
、NEVER
和 系统会将DEFAULT
解读为ALWAYS
,这样用户就不会看到黑色图标 长条形尺寸,显示为无边框。
以下示例展示了定位前和定位后的应用 Android 15(API 级别 35)以及应用边衬区之前和之后。
<ph type="x-smartling-placeholder">![](https://developer.android.google.cn/static/about/versions/15/images/edge-to-edge-4.png?authuser=9&hl=ko)
![](https://developer.android.google.cn/static/about/versions/15/images/edge-to-edge-6.png?authuser=9&hl=ko)
![](https://developer.android.google.cn/static/about/versions/15/images/edge-to-edge-2.png?authuser=9&hl=ko)
检查应用是否已采用全屏的检查步骤
如果您的应用已经采用无边框且应用了边衬区, 基本未受影响,但下列情况除外。但即使您认为 您不会受到影响,但我们建议您测试自己的应用。
- 您的非浮动窗口(例如
Activity
)使用SHORT_EDGES
、NEVER
或DEFAULT
,而不是LAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS
。如果您的应用在启动时崩溃 可能是启动画面所致您可以升级核心 初始屏幕依赖项更改为 1.2.0-alpha01 或更高版本,或者设置window.attributes.layoutInDisplayCutoutMode = WindowManager.LayoutInDisplayCutoutMode.always
。 - 可能会有流量较低的屏幕显示被遮挡的界面。验证这些
访问较少的屏幕也不会显示被遮挡的界面。流量较低的屏幕包括:
<ph type="x-smartling-placeholder">
- </ph>
- 初始配置或登录屏幕
- “设置”页面
如何检查应用尚未实现无边框
如果您的应用还没有全面屏,那么您很可能会受到影响。在 除了针对已经采用无边框的应用的情况之外, 请考虑以下事项:
- 如果您的应用使用 Material 3 组件 (
androidx.compose.material3
),例如TopAppBar
,BottomAppBar
和NavigationBar
,那么这些组件可能不 会受到影响,因为它们会自动处理边衬区。 - 如果您的应用使用 Material 2 组件 (
androidx.compose.material
),那么这些组件 不会自动处理边衬区。不过,您可以使用边衬区 并手动应用这些设置在 androidx.compose.material 1.6.0 中 然后使用windowInsets
参数手动应用边衬区BottomAppBar
、TopAppBar
、BottomNavigation
和NavigationRail
。 同样,对以下内容使用contentWindowInsets
形参:Scaffold
. - 如果您的应用使用视图和 Material 组件
(
com.google.android.material
),大多数基于 View 的 Material 如BottomNavigationView
、BottomAppBar
、NavigationRailView
或NavigationView
,处理边衬区,不需要 额外工作。但是,您需要将android:fitsSystemWindows="true"
如果使用AppBarLayout
,则会发生此错误。 - 对于自定义可组合项,请手动将边衬区作为内边距应用。如果您的
内容位于
Scaffold
内,因此您可以使用Scaffold
来使用边衬区 内边距值。否则,使用WindowInsets
. - 如果您的应用使用的是视图和
BottomSheet
、SideSheet
或自定义 使用ViewCompat.setOnApplyWindowInsetsListener
。对于RecyclerView
,使用此监听器应用内边距,同时添加clipToPadding="false"
.
检查应用是否必须提供自定义后台保护的注意事项
如果您的应用必须为“三按钮”导航或
状态栏,则应用应将可组合项或视图放在系统栏后面
使用 WindowInsets.Type#tappableElement()
获取三按钮
导航栏高度或 WindowInsets.Type#statusBars
。
其他无边框资源
请参阅无边框视图和无边框 Compose 了解应用边衬区的其他注意事项。
已弃用的 API
以下 API 现已弃用:
R.attr#enforceStatusBarContrast
R.attr#navigationBarColor
R.attr#navigationBarDividerColor
R.attr#statusBarColor
Window#getNavigationBarColor
Window#getNavigationBarDividerColor
Window#getStatusBarColor
Window#isStatusBarContrastEnforced
Window#setDecorFitsSystemWindows
Window#setNavigationBarColor
Window#setNavigationBarDividerColor
Window#setStatusBarColor
Window#setStatusBarContrastEnforced
稳定配置
如果您的应用以 Android 15(API 级别 35)或更高版本为目标平台,Configuration
否
不再包含系统栏。如果您使用
Configuration
类,您应将其替换为更好的
相应的 ViewGroup
、WindowInsets
或
WindowMetricsCalculator
,具体取决于您的需求。
Configuration
从 API 1 开始提供。它通常从
Activity.onConfigurationChanged
.它提供窗口密度、
屏幕方向和尺寸窗口大小的一个重要特征
Configuration
之前会排除系统栏。
配置大小通常用于选择资源,例如
/res/layout-h500dp
,这仍然是一个有效的用例。但将其用于
但一直不建议进行布局计算。如果需要,您应该将
现在离它远去。您应该使用 Configuration
具体取决于您的应用场景。
如果使用它来计算布局,请使用适当的 ViewGroup
,例如
CoordinatorLayout
或 ConstraintLayout
。如果使用该属性确定高度
,请使用 WindowInsets
。如果您想知道当前尺寸
,请使用 computeCurrentWindowMetrics
。
以下列表介绍了受此变更影响的字段:
Configuration.screenWidthDp
和screenHeightDp
尺寸不再 排除系统栏。Configuration.smallestScreenWidthDp
受到更改的间接影响 发送给screenWidthDp
和screenHeightDp
。Configuration.orientation
受到以下项的更改间接影响:screenWidthDp
和screenHeightDp
,在近似方形设备上显示。Display.getSize(Point)
会间接受到Configuration
。从 API 级别 30 开始,此 API 已废弃。- 从 API 级别 33 开始,
Display.getMetrics()
已采用这种方式。
우아한 텍스트 높이 속성의 기본값은 true입니다.
对于以 Android 15 为目标平台的应用,elegantTextHeight
TextView
属性默认变为 true
,将默认使用的紧凑字体替换为一些具有较大垂直指标的脚本,并且这种字体更易于阅读。紧凑字体的引入是为了防止破坏布局;Android 13(API 级别 33)允许文本布局利用 fallbackLineSpacing
属性拉伸垂直高度,以防止许多此类破坏。
在 Android 15 中,紧凑字体仍保留在系统中,因此您的应用可以将 elegantTextHeight
设置为 false
,以获得与之前相同的行为,但即将在未来版本中提供支持。因此,如果您的应用支持以下文字:阿拉伯语、老挝语、缅甸、泰米尔语、古吉拉特语、卡纳达语、马拉雅拉姆语、奥里亚语、泰卢固语或泰语,请将 elegantTextHeight
设置为 true
,以测试应用。
![](https://developer.android.google.cn/static/about/versions/15/images/elegant-text-height-before.png?authuser=9&hl=ko)
elegantTextHeight
行为。![](https://developer.android.google.cn/static/about/versions/15/images/elegant-text-height-after.png?authuser=9&hl=ko)
elegantTextHeight
行为。복잡한 문자 도형의 TextView 너비 변경
在以前的 Android 版本中,一些采用复杂形状的草体字体或语言可能会在上一个或下一个字符区域中绘制字母。在某些情况下,此类字母会在开始或结束位置被截断。从 Android 15 开始,TextView
会分配宽度来为此类字母绘制足够的空间,并允许应用请求左侧添加额外的内边距以防止被裁剪。
由于此变更会影响 TextView
确定宽度的方式,因此如果应用以 Android 15 或更高版本为目标平台,TextView
会默认分配更多宽度。您可以通过对 TextView
调用 setUseBoundsForWidth
API 来启用或停用此行为。
由于添加左侧内边距可能会导致现有布局未对齐,因此默认情况下,系统不会添加内边距,即使对于以 Android 15 或更高版本为目标平台的应用也是如此。不过,您可以通过调用 setShiftDrawingOffsetForStartOverhang
添加额外的内边距以防止裁剪。
以下示例展示了这些更改如何改进某些字体和语言的文本布局。
![](https://developer.android.google.cn/static/about/versions/15/images/cursive-clipped.png?authuser=9&hl=ko)
<TextView android:fontFamily="cursive" android:text="java" />
![](https://developer.android.google.cn/static/about/versions/15/images/cursive-noclipping.png?authuser=9&hl=ko)
<TextView android:fontFamily="cursive" android:text="java" android:useBoundsForWidth="true" android:shiftDrawingOffsetForStartOverhang="true" />
![](https://developer.android.google.cn/static/about/versions/15/images/thai-clipped.png?authuser=9&hl=ko)
<TextView android:text="คอมพิวเตอร์" />
![](https://developer.android.google.cn/static/about/versions/15/images/thai-noclipping.png?authuser=9&hl=ko)
<TextView android:text="คอมพิวเตอร์" android:useBoundsForWidth="true" android:shiftDrawingOffsetForStartOverhang="true" />
EditText의 언어 인식 기본 행 높이
In previous versions of Android, the text layout stretched the height of the
text to meet the line height of the font that matched the current locale. For
example, if the content was in Japanese, because the line height of the Japanese
font is slightly larger than the one of a Latin font, the height of the text
became slightly larger. However, despite these differences in line heights, the
EditText
element was sized uniformly, regardless
of the locale being used, as illustrated in the following image:
![](https://developer.android.google.cn/static/about/versions/15/images/locale-aware-line-height-before.png?authuser=9&hl=ko)
EditText
elements that
can contain text from English (en), Japanese (ja), and Burmese (my). The
height of the EditText
is the same, even though these languages
have different line heights from each other.For apps targeting Android 15, a minimum line height is now reserved for
EditText
to match the reference font for the specified Locale, as shown in the
following image:
![](https://developer.android.google.cn/static/about/versions/15/images/locale-aware-line-height-after.png?authuser=9&hl=ko)
EditText
elements that
can contain text from English (en), Japanese (ja), and Burmese (my). The
height of the EditText
now includes space to accommodate the
default line height for these languages' fonts.If needed, your app can restore the previous behavior by specifying the
useLocalePreferredLineHeightForMinimum
attribute
to false
, and your app can set custom minimum vertical metrics using the
setMinimumFontMetrics
API in Kotlin and Java.
카메라 및 미디어
Android 15에서는 Android 15 이상을 타겟팅하는 앱의 카메라 및 미디어 동작을 다음과 같이 변경합니다.
오디오 포커스 요청 제한사항
以 Android 15 为目标平台的应用必须是顶级应用或运行前台服务,才能请求音频焦点。如果应用在不符合其中任何一项要求时尝试请求焦点,该调用将返回 AUDIOFOCUS_REQUEST_FAILED
。
您可以参阅管理音频焦点,详细了解音频焦点。
업데이트된 비 SDK 제한사항
Android 15에는 제한된 비 SDK의 업데이트된 목록이 포함됨 Android 개발자와의 공동작업 및 최신 내부 테스트 비 SDK 인터페이스를 제한하는 경우, 가능하면 해당 인터페이스에 대한 공개된 대안이 사용 가능한지 여부를 확인합니다.
앱이 Android 15를 타겟팅하지 않는 경우 이러한 변경사항 중 일부는 즉시 영향을 받지 않을 수 있습니다 그러나 앱에서 일부 비 SDK 인터페이스에 액세스 앱의 대상 API 수준에 따라 다를 수 있습니다. 메서드 또는 필드는 항상 앱이 중단될 위험이 높습니다.
앱에서 비 SDK 인터페이스를 사용하는지 확실하지 않은 경우 앱을 테스트하여 알아보세요. 앱에서 비 SDK를 사용하는 경우 인터페이스를 사용하려면 대체 SDK로의 이전을 계획해야 합니다. 하지만 일부 앱에서는 비 SDK 인터페이스에 대해 알아보도록 하겠습니다. 비 SDK 사용의 대안을 찾을 수 없는 경우 인터페이스를 구현하려는 경우 새 공개 API를 요청할 수 있습니다.
如需详细了解此 Android 版本中的变更,请参阅 Android 15 中有关限制非 SDK 接口的更新。如需全面了解有关非 SDK 接口的详细信息,请参阅对非 SDK 接口的限制。