与之前的版本一样,Android 14 包含一些行为变更,这些变更可能会影响您的应用。以下行为变更仅影响以 Android 14(API 级别 34)或更高版本为目标平台的应用。如果您的应用以 Android 14 或更高版本为目标平台,您应该修改自己的应用以适当地支持这些行为(如果适用)。
请务必查看对 Android 14 上运行的所有应用都有影响的行为变更列表(无论应用的 targetSdkVersion
如何)。
核心功能
前台服务类型是必填项
If your app targets Android 14 (API level 34) or higher, it must specify at least one foreground service type for each foreground service within your app. You should choose a foreground service type that represents your app's use case. The system expects foreground services that have a particular type to satisfy a particular use case.
If a use case in your app isn't associated with any of these types, it's strongly recommended that you migrate your logic to use WorkManager or user-initiated data transfer jobs.
在 BluetoothAdapter 中强制执行 BLUETOOTH_CONNECT 权限
Android 14 enforces the BLUETOOTH_CONNECT
permission when calling the
BluetoothAdapter
getProfileConnectionState()
method for apps targeting
Android 14 (API level 34) or higher.
This method already required the BLUETOOTH_CONNECT
permission, but it was not
enforced. Make sure your app declares BLUETOOTH_CONNECT
in your app's
AndroidManifest.xml
file as shown in the following snippet and check that
a user has granted the permission before calling
getProfileConnectionState
.
<uses-permission android:name="android.permission.BLUETOOTH_CONNECT" />
OpenJDK 17 更新
Android 14 将继续更新 Android 的核心库,以与最新 OpenJDK LTS 版本中的功能保持一致,包括适合应用和平台开发者的库更新和 Java 17 语言支持。
以下变更可能会影响应用兼容性:
- 对正则表达式的更改:现在,为了更严格地遵循 OpenJDK 的语义,不允许无效的组引用。您可能会看到
java.util.regex.Matcher
类抛出IllegalArgumentException
的新情况,因此请务必测试应用中使用正则表达式的情形。如需在测试期间启用或停用此变更,请使用兼容性框架工具切换DISALLOW_INVALID_GROUP_REFERENCE
标志。 - UUID 处理:现在,验证输入参数时,
java.util.UUID.fromString()
方法会执行更严格的检查,因此您可能会在反序列化期间看到IllegalArgumentException
。如需在测试期间启用或停用此变更,请使用兼容性框架工具切换ENABLE_STRICT_VALIDATION
标志。 - ProGuard 问题:有时,在您尝试使用 ProGuard 缩减、混淆和优化应用时,添加
java.lang.ClassValue
类会导致问题。问题源自 Kotlin 库,该库会根据Class.forName("java.lang.ClassValue")
是否会返回类更改运行时行为。如果您的应用是根据没有java.lang.ClassValue
类的旧版运行时开发的,则这些优化可能会将computeValue
方法从派生自java.lang.ClassValue
的类中移除。
JobScheduler 强化了回调和网络行为
Since its introduction, JobScheduler expects your app to return from
onStartJob
or onStopJob
within a few seconds. Prior to Android 14,
if a job runs too long, the job is stopped and fails silently.
If your app targets Android 14 (API level 34) or higher and
exceeds the granted time on the main thread, the app triggers an ANR
with the error message "No response to onStartJob
" or
"No response to onStopJob
".
This ANR may be a result of 2 scenarios:
1. There is work blocking the main thread, preventing the callbacks onStartJob
or onStopJob
from executing and completing within the expected time limit.
2. The developer is running blocking work within the JobScheduler
callback onStartJob
or onStopJob
, preventing the callback from
completing within the expected time limit.
To address #1, you will need to further debug what is blocking the main thread
when the ANR occurs, you can do this using
ApplicationExitInfo#getTraceInputStream()
to get the tombstone
trace when the ANR occurs. If you're able to manually reproduce the ANR,
you can record a system trace and inspect the trace using either
Android Studio or Perfetto to better understand what is running on
the main thread when the ANR occurs.
Note that this can happen when using JobScheduler API directly
or using the androidx library WorkManager.
To address #2, consider migrating to WorkManager, which provides
support for wrapping any processing in onStartJob
or onStopJob
in an asynchronous thread.
JobScheduler
also introduces a requirement to declare the
ACCESS_NETWORK_STATE
permission if using setRequiredNetworkType
or
setRequiredNetwork
constraint. If your app does not declare the
ACCESS_NETWORK_STATE
permission when scheduling the job and is targeting
Android 14 or higher, it will result in a SecurityException
.
Tiles 发布 API
对于以 Android 14 及更高版本为目标平台的应用,
TileService#startActivityAndCollapse(Intent)
已弃用,现在会抛出
调用时抛出异常。如果您的应用从功能块启动 activity,请使用
TileService#startActivityAndCollapse(PendingIntent)
。
隐私设置
拥有对照片和视频的部分访问权限
Android 14 introduces Selected Photos Access, which allows users to grant apps access to specific images and videos in their library, rather than granting access to all media of a given type.
This change is only enabled if your app targets Android 14 (API level 34) or higher. If you don't use the photo picker yet, we recommend implementing it in your app to provide a consistent experience for selecting images and videos that also enhances user privacy without having to request any storage permissions.
If you maintain your own gallery picker using storage permissions and need to
maintain full control over your implementation, adapt your implementation
to use the new READ_MEDIA_VISUAL_USER_SELECTED
permission. If your app
doesn't use the new permission, the system runs your app in a compatibility
mode.
用户体验
安全的全屏 intent 通知
With Android 11 (API level 30), it was possible for any app to use
Notification.Builder.setFullScreenIntent
to send full-screen
intents while the phone is locked. You could auto-grant this on app install by
declaring USE_FULL_SCREEN_INTENT
permission in the
AndroidManifest.
Full-screen intent notifications are designed for extremely high-priority
notifications demanding the user's immediate attention, such as an incoming
phone call or alarm clock settings configured by the user. For apps targeting
Android 14 (API level 34) or higher, apps that are allowed to use this
permission are limited to those that provide calling and alarms only. The Google
Play Store revokes default USE_FULL_SCREEN_INTENT
permissions for any apps
that don't fit this profile. The deadline for these policy changes is May 31,
2024.
This permission remains enabled for apps installed on the phone before the user updates to Android 14. Users can turn this permission on and off.
You can use the new API
NotificationManager.canUseFullScreenIntent
to check if your app
has the permission; if not, your app can use the new intent
ACTION_MANAGE_APP_USE_FULL_SCREEN_INTENT
to launch the settings
page where users can grant the permission.
安全
对隐式 intent 和待处理 intent 的限制
For apps targeting Android 14 (API level 34) or higher, Android restricts apps from sending implicit intents to internal app components in the following ways:
- Implicit intents are only delivered to exported components. Apps must either use an explicit intent to deliver to unexported components, or mark the component as exported.
- If an app creates a mutable pending intent with an intent that doesn't specify a component or package, the system throws an exception.
These changes prevent malicious apps from intercepting implicit intents that are intended for use by an app's internal components.
For example, here is an intent filter that could be declared in your app's manifest file:
<activity
android:name=".AppActivity"
android:exported="false">
<intent-filter>
<action android:name="com.example.action.APP_ACTION" />
<category android:name="android.intent.category.DEFAULT" />
</intent-filter>
</activity>
If your app tried to launch this activity using an implicit intent, an
ActivityNotFoundException
exception would be thrown:
Kotlin
// Throws an ActivityNotFoundException exception when targeting Android 14. context.startActivity(Intent("com.example.action.APP_ACTION"))
Java
// Throws an ActivityNotFoundException exception when targeting Android 14. context.startActivity(new Intent("com.example.action.APP_ACTION"));
To launch the non-exported activity, your app should use an explicit intent instead:
Kotlin
// This makes the intent explicit. val explicitIntent = Intent("com.example.action.APP_ACTION") explicitIntent.apply { package = context.packageName } context.startActivity(explicitIntent)
Java
// This makes the intent explicit. Intent explicitIntent = new Intent("com.example.action.APP_ACTION") explicitIntent.setPackage(context.getPackageName()); context.startActivity(explicitIntent);
在运行时注册的广播接收器必须指定导出行为
Apps and services that target Android 14 (API level 34) or higher and use
context-registered receivers are required to specify a flag
to indicate whether or not the receiver should be exported to all other apps on
the device: either RECEIVER_EXPORTED
or RECEIVER_NOT_EXPORTED
, respectively.
This requirement helps protect apps from security vulnerabilities by leveraging
the features for these receivers introduced in Android 13.
Exception for receivers that receive only system broadcasts
If your app is registering a receiver only for
system broadcasts through Context#registerReceiver
methods, such as Context#registerReceiver()
, then it
shouldn't specify a flag when registering the receiver.
更安全的动态代码加载
If your app targets Android 14 (API level 34) or higher and uses Dynamic Code Loading (DCL), all dynamically-loaded files must be marked as read-only. Otherwise, the system throws an exception. We recommend that apps avoid dynamically loading code whenever possible, as doing so greatly increases the risk that an app can be compromised by code injection or code tampering.
If you must dynamically load code, use the following approach to set the dynamically-loaded file (such as a DEX, JAR, or APK file) as read-only as soon as the file is opened and before any content is written:
Kotlin
val jar = File("DYNAMICALLY_LOADED_FILE.jar") val os = FileOutputStream(jar) os.use { // Set the file to read-only first to prevent race conditions jar.setReadOnly() // Then write the actual file content } val cl = PathClassLoader(jar, parentClassLoader)
Java
File jar = new File("DYNAMICALLY_LOADED_FILE.jar"); try (FileOutputStream os = new FileOutputStream(jar)) { // Set the file to read-only first to prevent race conditions jar.setReadOnly(); // Then write the actual file content } catch (IOException e) { ... } PathClassLoader cl = new PathClassLoader(jar, parentClassLoader);
Handle dynamically-loaded files that already exist
To prevent exceptions from being thrown for existing dynamically-loaded files, we recommend deleting and recreating the files before you try to dynamically load them again in your app. As you recreate the files, follow the preceding guidance for marking the files read-only at write time. Alternatively, you can re-label the existing files as read-only, but in this case, we strongly recommend that you verify the integrity of the files first (for example, by checking the file's signature against a trusted value), to help protect your app from malicious actions.
针对从后台启动 activity 的其他限制
For apps targeting Android 14 (API level 34) or higher, the system further restricts when apps are allowed to start activities from the background:
- When an app sends a
PendingIntent
usingPendingIntent#send()
or similar methods, the app must opt in if it wants to grant its own background activity launch privileges to start the pending intent. To opt in, the app should pass anActivityOptions
bundle withsetPendingIntentBackgroundActivityStartMode(MODE_BACKGROUND_ACTIVITY_START_ALLOWED)
. - When a visible app binds a service of another app that's in the background
using the
bindService()
method, the visible app must now opt in if it wants to grant its own background activity launch privileges to the bound service. To opt in, the app should include theBIND_ALLOW_ACTIVITY_STARTS
flag when calling thebindService()
method.
These changes expand the existing set of restrictions to protect users by preventing malicious apps from abusing APIs to start disruptive activities from the background.
压缩路径遍历
For apps targeting Android 14 (API level 34) or higher, Android prevents the Zip
Path Traversal Vulnerability in the following way:
ZipFile(String)
and
ZipInputStream.getNextEntry()
throws a
ZipException
if zip file entry names contain ".." or start
with "/".
Apps can opt-out from this validation by calling
dalvik.system.ZipPathValidator.clearCallback()
.
每次 MediaProjection 捕获会话都需要征得用户同意
For apps targeting Android 14 (API level 34) or higher, a SecurityException
is
thrown by MediaProjection#createVirtualDisplay
in either of the following
scenarios:
- Your app caches the
Intent
that is returned fromMediaProjectionManager#createScreenCaptureIntent
, and passes it multiple times toMediaProjectionManager#getMediaProjection
. - Your app invokes
MediaProjection#createVirtualDisplay
multiple times on the sameMediaProjection
instance.
Your app must ask the user to give consent before each capture session. A single
capture session is a single invocation on
MediaProjection#createVirtualDisplay
, and each MediaProjection
instance must
be used only once.
Handle configuration changes
If your app needs to invoke MediaProjection#createVirtualDisplay
to handle
configuration changes (such as the screen orientation or screen size changing),
you can follow these steps to update the VirtualDisplay
for the existing
MediaProjection
instance:
- Invoke
VirtualDisplay#resize
with the new width and height. - Provide a new
Surface
with the new width and height toVirtualDisplay#setSurface
.
Register a callback
Your app should register a callback to handle cases where the user doesn't grant
consent to continue a capture session. To do this, implement
Callback#onStop
and have your app release any related resources (such as
the VirtualDisplay
and Surface
).
If your app doesn't register this callback,
MediaProjection#createVirtualDisplay
throws an IllegalStateException
when your app invokes it.
更新后的非 SDK 限制
Android 14 包含更新后的受限非 SDK 接口列表(基于与 Android 开发者之间的协作以及最新的内部测试)。在限制使用非 SDK 接口之前,我们会尽可能确保有可用的公开替代方案。
如果您的应用并非以 Android 14 为目标平台,其中一些变更可能不会立即对您产生影响。然而,虽然您目前仍可以使用一些非 SDK 接口(具体取决于应用的目标 API 级别),但只要您使用任何非 SDK 方法或字段,终归存在导致应用出问题的显著风险。
如果您不确定自己的应用是否使用了非 SDK 接口,则可以测试您的应用来进行确认。如果您的应用依赖于非 SDK 接口,您应该开始计划迁移到 SDK 替代方案。然而,我们知道某些应用具有使用非 SDK 接口的有效用例。如果您无法为应用中的某项功能找到使用非 SDK 接口的替代方案,应请求新的公共 API。
如需详细了解此 Android 版本中的变更,请参阅 Android 14 中有关限制非 SDK 接口的更新。如需全面了解有关非 SDK 接口的详细信息,请参阅对非 SDK 接口的限制。