পূর্ববর্তী রিলিজের মতো, Android 14-এ এমন আচরণের পরিবর্তন অন্তর্ভুক্ত রয়েছে যা আপনার অ্যাপকে প্রভাবিত করতে পারে। নিম্নলিখিত আচরণ পরিবর্তনগুলি শুধুমাত্র Android 14 (API স্তর 34) বা উচ্চতরকে লক্ষ্য করে এমন অ্যাপগুলিতে প্রযোজ্য। যদি আপনার অ্যাপটি Android 14 বা তার বেশির দিকে লক্ষ্য করে থাকে, তাহলে প্রযোজ্য ক্ষেত্রে এই আচরণগুলিকে সঠিকভাবে সমর্থন করার জন্য আপনার অ্যাপটি সংশোধন করা উচিত।
অ্যাপ্লিকেশানের targetSdkVersion
নির্বিশেষে Android 14 এ চলমান সমস্ত অ্যাপ্লিকেশানকে প্রভাবিত করে এমন আচরণের পরিবর্তনগুলির তালিকাটিও পর্যালোচনা করতে ভুলবেন না।
মূল কার্যকারিতা
ফোরগ্রাউন্ড পরিষেবার প্রকারগুলি প্রয়োজন৷
If your app targets Android 14 (API level 34) or higher, it must specify at least one foreground service type for each foreground service within your app. You should choose a foreground service type that represents your app's use case. The system expects foreground services that have a particular type to satisfy a particular use case.
If a use case in your app isn't associated with any of these types, it's strongly recommended that you migrate your logic to use WorkManager or user-initiated data transfer jobs.
BluetoothAdapter-এ BLUETOOTH_CONNECT অনুমতির প্রয়োগ৷
Android 14 enforces the BLUETOOTH_CONNECT
permission when calling the
BluetoothAdapter
getProfileConnectionState()
method for apps targeting
Android 14 (API level 34) or higher.
This method already required the BLUETOOTH_CONNECT
permission, but it was not
enforced. Make sure your app declares BLUETOOTH_CONNECT
in your app's
AndroidManifest.xml
file as shown in the following snippet and check that
a user has granted the permission before calling
getProfileConnectionState
.
<uses-permission android:name="android.permission.BLUETOOTH_CONNECT" />
OpenJDK 17 আপডেট
Android 14 将继续更新 Android 的核心库,以与最新 OpenJDK LTS 版本中的功能保持一致,包括适合应用和平台开发者的库更新和 Java 17 语言支持。
以下变更可能会影响应用兼容性:
- 对正则表达式的更改:现在,为了更严格地遵循 OpenJDK 的语义,不允许无效的组引用。您可能会看到
java.util.regex.Matcher
类抛出IllegalArgumentException
的新情况,因此请务必测试应用中使用正则表达式的情形。如需在测试期间启用或停用此变更,请使用兼容性框架工具切换DISALLOW_INVALID_GROUP_REFERENCE
标志。 - UUID 处理:现在,验证输入参数时,
java.util.UUID.fromString()
方法会执行更严格的检查,因此您可能会在反序列化期间看到IllegalArgumentException
。如需在测试期间启用或停用此变更,请使用兼容性框架工具切换ENABLE_STRICT_VALIDATION
标志。 - ProGuard 问题:有时,在您尝试使用 ProGuard 缩减、混淆和优化应用时,添加
java.lang.ClassValue
类会导致问题。问题源自 Kotlin 库,该库会根据Class.forName("java.lang.ClassValue")
是否会返回类更改运行时行为。如果您的应用是根据没有java.lang.ClassValue
类的旧版运行时开发的,则这些优化可能会将computeValue
方法从派生自java.lang.ClassValue
的类中移除。
JobScheduler কলব্যাক এবং নেটওয়ার্ক আচরণকে শক্তিশালী করে
Since its introduction, JobScheduler expects your app to return from
onStartJob
or onStopJob
within a few seconds. Prior to Android 14,
if a job runs too long, the job is stopped and fails silently.
If your app targets Android 14 (API level 34) or higher and
exceeds the granted time on the main thread, the app triggers an ANR
with the error message "No response to onStartJob
" or
"No response to onStopJob
".
This ANR may be a result of 2 scenarios:
1. There is work blocking the main thread, preventing the callbacks onStartJob
or onStopJob
from executing and completing within the expected time limit.
2. The developer is running blocking work within the JobScheduler
callback onStartJob
or onStopJob
, preventing the callback from
completing within the expected time limit.
To address #1, you will need to further debug what is blocking the main thread
when the ANR occurs, you can do this using
ApplicationExitInfo#getTraceInputStream()
to get the tombstone
trace when the ANR occurs. If you're able to manually reproduce the ANR,
you can record a system trace and inspect the trace using either
Android Studio or Perfetto to better understand what is running on
the main thread when the ANR occurs.
Note that this can happen when using JobScheduler API directly
or using the androidx library WorkManager.
To address #2, consider migrating to WorkManager, which provides
support for wrapping any processing in onStartJob
or onStopJob
in an asynchronous thread.
JobScheduler
also introduces a requirement to declare the
ACCESS_NETWORK_STATE
permission if using setRequiredNetworkType
or
setRequiredNetwork
constraint. If your app does not declare the
ACCESS_NETWORK_STATE
permission when scheduling the job and is targeting
Android 14 or higher, it will result in a SecurityException
.
টাইলস লঞ্চ API
14 এবং উচ্চতর টার্গেট করা অ্যাপ্লিকেশানগুলির জন্য, TileService#startActivityAndCollapse(Intent)
বাতিল করা হয়েছে এবং এখন কল করার সময় একটি ব্যতিক্রম থ্রো করে৷ যদি আপনার অ্যাপটি টাইলস থেকে ক্রিয়াকলাপ চালু করে, তাহলে পরিবর্তে TileService#startActivityAndCollapse(PendingIntent)
ব্যবহার করুন।
গোপনীয়তা
ফটো এবং ভিডিও আংশিক অ্যাক্সেস
Android 14 引入了“已选照片访问权限”,让用户可以向应用授予对其媒体库中特定图片和视频的访问权限,而不是授予对给定类型的所有媒体的访问权限。
只有当您的应用以 Android 14(API 级别 34)或更高版本为目标平台时,此更改才会启用。如果您尚未使用照片选择器,我们建议您在应用中实现照片选择器,以提供一致的图片和视频选择体验,同时增强用户隐私保护,而无需请求任何存储权限。
如果您使用存储权限维护自己的图库选择器,并且需要对实现保持完全控制,请调整实现以使用新的 READ_MEDIA_VISUAL_USER_SELECTED
权限。如果您的应用不使用新权限,系统会以兼容模式运行您的应用。
ব্যবহারকারীর অভিজ্ঞতা
পূর্ণ-স্ক্রীন ইন্টেন্ট বিজ্ঞপ্তিগুলি সুরক্ষিত করুন
With Android 11 (API level 30), it was possible for any app to use
Notification.Builder.setFullScreenIntent
to send full-screen
intents while the phone is locked. You could auto-grant this on app install by
declaring USE_FULL_SCREEN_INTENT
permission in the
AndroidManifest.
Full-screen intent notifications are designed for extremely high-priority
notifications demanding the user's immediate attention, such as an incoming
phone call or alarm clock settings configured by the user. For apps targeting
Android 14 (API level 34) or higher, apps that are allowed to use this
permission are limited to those that provide calling and alarms only. The Google
Play Store revokes default USE_FULL_SCREEN_INTENT
permissions for any apps
that don't fit this profile. The deadline for these policy changes is May 31,
2024.
This permission remains enabled for apps installed on the phone before the user updates to Android 14. Users can turn this permission on and off.
You can use the new API
NotificationManager.canUseFullScreenIntent
to check if your app
has the permission; if not, your app can use the new intent
ACTION_MANAGE_APP_USE_FULL_SCREEN_INTENT
to launch the settings
page where users can grant the permission.
নিরাপত্তা
অন্তর্নিহিত এবং মুলতুবি অভিপ্রায়ে সীমাবদ্ধতা
For apps targeting Android 14 (API level 34) or higher, Android restricts apps from sending implicit intents to internal app components in the following ways:
- Implicit intents are only delivered to exported components. Apps must either use an explicit intent to deliver to unexported components, or mark the component as exported.
- If an app creates a mutable pending intent with an intent that doesn't specify a component or package, the system throws an exception.
These changes prevent malicious apps from intercepting implicit intents that are intended for use by an app's internal components.
For example, here is an intent filter that could be declared in your app's manifest file:
<activity
android:name=".AppActivity"
android:exported="false">
<intent-filter>
<action android:name="com.example.action.APP_ACTION" />
<category android:name="android.intent.category.DEFAULT" />
</intent-filter>
</activity>
If your app tried to launch this activity using an implicit intent, an
ActivityNotFoundException
exception would be thrown:
Kotlin
// Throws an ActivityNotFoundException exception when targeting Android 14. context.startActivity(Intent("com.example.action.APP_ACTION"))
Java
// Throws an ActivityNotFoundException exception when targeting Android 14. context.startActivity(new Intent("com.example.action.APP_ACTION"));
To launch the non-exported activity, your app should use an explicit intent instead:
Kotlin
// This makes the intent explicit. val explicitIntent = Intent("com.example.action.APP_ACTION") explicitIntent.apply { package = context.packageName } context.startActivity(explicitIntent)
Java
// This makes the intent explicit. Intent explicitIntent = new Intent("com.example.action.APP_ACTION") explicitIntent.setPackage(context.getPackageName()); context.startActivity(explicitIntent);
রানটাইম-নিবন্ধিত ব্রডকাস্ট রিসিভারদের অবশ্যই রপ্তানি আচরণ নির্দিষ্ট করতে হবে
Apps and services that target Android 14 (API level 34) or higher and use
context-registered receivers are required to specify a flag
to indicate whether or not the receiver should be exported to all other apps on
the device: either RECEIVER_EXPORTED
or RECEIVER_NOT_EXPORTED
, respectively.
This requirement helps protect apps from security vulnerabilities by leveraging
the features for these receivers introduced in Android 13.
Exception for receivers that receive only system broadcasts
If your app is registering a receiver only for
system broadcasts through Context#registerReceiver
methods, such as Context#registerReceiver()
, then it
shouldn't specify a flag when registering the receiver.
নিরাপদ ডায়নামিক কোড লোড হচ্ছে
যদি আপনার অ্যাপটি Android 14 (API লেভেল 34) বা উচ্চতরকে টার্গেট করে এবং ডায়নামিক কোড লোডিং (DCL) ব্যবহার করে, তবে সমস্ত গতিশীল-লোড করা ফাইলগুলিকে শুধুমাত্র পঠনযোগ্য হিসাবে চিহ্নিত করতে হবে। অন্যথায়, সিস্টেম একটি ব্যতিক্রম নিক্ষেপ. আমরা সুপারিশ করি যে যখনই সম্ভব অ্যাপগুলিকে গতিশীলভাবে কোড লোড করা এড়িয়ে চলুন , কারণ এটি করার ফলে কোড ইনজেকশন বা কোড টেম্পারিং দ্বারা একটি অ্যাপের সাথে আপস করা হওয়ার ঝুঁকি অনেক বেড়ে যায়।
যদি আপনাকে গতিশীলভাবে কোড লোড করতে হয়, ফাইলটি খোলার সাথে সাথে এবং কোনো বিষয়বস্তু লেখার আগে গতিশীলভাবে লোড করা ফাইল (যেমন একটি DEX, JAR বা APK ফাইল) শুধুমাত্র পঠনযোগ্য হিসাবে সেট করতে নিম্নলিখিত পদ্ধতিটি ব্যবহার করুন:
কোটলিন
val jar = File("DYNAMICALLY_LOADED_FILE.jar") val os = FileOutputStream(jar) os.use { // Set the file to read-only first to prevent race conditions jar.setReadOnly() // Then write the actual file content } val cl = PathClassLoader(jar, parentClassLoader)
জাভা
File jar = new File("DYNAMICALLY_LOADED_FILE.jar"); try (FileOutputStream os = new FileOutputStream(jar)) { // Set the file to read-only first to prevent race conditions jar.setReadOnly(); // Then write the actual file content } catch (IOException e) { ... } PathClassLoader cl = new PathClassLoader(jar, parentClassLoader);
গতিশীল-লোড করা ফাইলগুলি পরিচালনা করুন যা ইতিমধ্যেই বিদ্যমান
বিদ্যমান গতিশীলভাবে লোড করা ফাইলগুলির জন্য ব্যতিক্রমগুলি ছুঁড়ে ফেলা থেকে প্রতিরোধ করার জন্য, আমরা আপনার অ্যাপে আবার গতিশীলভাবে লোড করার চেষ্টা করার আগে ফাইলগুলি মুছে ফেলা এবং পুনরায় তৈরি করার পরামর্শ দিই৷ আপনি ফাইলগুলি পুনরায় তৈরি করার সময়, লেখার সময় ফাইলগুলিকে শুধুমাত্র পঠনযোগ্য চিহ্নিত করার জন্য পূর্ববর্তী নির্দেশিকা অনুসরণ করুন। বিকল্পভাবে, আপনি বিদ্যমান ফাইলগুলিকে শুধুমাত্র-পঠন হিসাবে পুনরায় লেবেল করতে পারেন, তবে এই ক্ষেত্রে, আমরা দৃঢ়ভাবে সুপারিশ করি যে আপনি প্রথমে ফাইলগুলির অখণ্ডতা যাচাই করুন (উদাহরণস্বরূপ, একটি বিশ্বস্ত মানের বিপরীতে ফাইলের স্বাক্ষর চেক করে), সুরক্ষায় সহায়তা করতে দূষিত কর্ম থেকে আপনার অ্যাপ্লিকেশন.
ব্যাকগ্রাউন্ড থেকে কার্যক্রম শুরু করার অতিরিক্ত বিধিনিষেধ
For apps targeting Android 14 (API level 34) or higher, the system further restricts when apps are allowed to start activities from the background:
- When an app sends a
PendingIntent
usingPendingIntent#send()
or similar methods, the app must opt in if it wants to grant its own background activity launch privileges to start the pending intent. To opt in, the app should pass anActivityOptions
bundle withsetPendingIntentBackgroundActivityStartMode(MODE_BACKGROUND_ACTIVITY_START_ALLOWED)
. - When a visible app binds a service of another app that's in the background
using the
bindService()
method, the visible app must now opt in if it wants to grant its own background activity launch privileges to the bound service. To opt in, the app should include theBIND_ALLOW_ACTIVITY_STARTS
flag when calling thebindService()
method.
These changes expand the existing set of restrictions to protect users by preventing malicious apps from abusing APIs to start disruptive activities from the background.
জিপ পাথ ট্রাভার্সাল
对于以 Android 14(API 级别 34)或更高版本为目标平台的应用,Android 会通过以下方式防止 Zip 路径遍历漏洞:如果 Zip 文件条目名称包含“..”或以“/”开头,ZipFile(String)
和 ZipInputStream.getNextEntry()
会抛出 ZipException
。
应用可以通过调用 dalvik.system.ZipPathValidator.clearCallback()
选择停用此验证。
প্রতিটি MediaProjection ক্যাপচার সেশনের জন্য ব্যবহারকারীর সম্মতি প্রয়োজন
For apps targeting Android 14 (API level 34) or higher, a SecurityException
is
thrown by MediaProjection#createVirtualDisplay
in either of the following
scenarios:
- Your app caches the
Intent
that is returned fromMediaProjectionManager#createScreenCaptureIntent
, and passes it multiple times toMediaProjectionManager#getMediaProjection
. - Your app invokes
MediaProjection#createVirtualDisplay
multiple times on the sameMediaProjection
instance.
Your app must ask the user to give consent before each capture session. A single
capture session is a single invocation on
MediaProjection#createVirtualDisplay
, and each MediaProjection
instance must
be used only once.
Handle configuration changes
If your app needs to invoke MediaProjection#createVirtualDisplay
to handle
configuration changes (such as the screen orientation or screen size changing),
you can follow these steps to update the VirtualDisplay
for the existing
MediaProjection
instance:
- Invoke
VirtualDisplay#resize
with the new width and height. - Provide a new
Surface
with the new width and height toVirtualDisplay#setSurface
.
Register a callback
Your app should register a callback to handle cases where the user doesn't grant
consent to continue a capture session. To do this, implement
Callback#onStop
and have your app release any related resources (such as
the VirtualDisplay
and Surface
).
If your app doesn't register this callback,
MediaProjection#createVirtualDisplay
throws an IllegalStateException
when your app invokes it.
নন-SDK সীমাবদ্ধতা আপডেট করা হয়েছে
Android 14-এ Android বিকাশকারীদের সাথে সহযোগিতা এবং সর্বশেষ অভ্যন্তরীণ পরীক্ষার উপর ভিত্তি করে সীমাবদ্ধ নন-SDK ইন্টারফেসের আপডেট করা তালিকা অন্তর্ভুক্ত রয়েছে। যখনই সম্ভব, আমরা নিশ্চিত করি যে আমরা নন-SDK ইন্টারফেস সীমাবদ্ধ করার আগে সর্বজনীন বিকল্পগুলি উপলব্ধ রয়েছে।
যদি আপনার অ্যাপ অ্যান্ড্রয়েড 14 কে টার্গেট না করে, তবে এই পরিবর্তনগুলির মধ্যে কিছু আপনাকে অবিলম্বে প্রভাবিত করতে পারে না। যাইহোক, যদিও আপনি বর্তমানে কিছু নন-SDK ইন্টারফেস ব্যবহার করতে পারেন ( আপনার অ্যাপের টার্গেট API লেভেলের উপর নির্ভর করে ), যেকোন নন-SDK পদ্ধতি বা ক্ষেত্র ব্যবহার করলে সবসময় আপনার অ্যাপ ভাঙার উচ্চ ঝুঁকি থাকে।
আপনি যদি নিশ্চিত না হন যে আপনার অ্যাপ নন-SDK ইন্টারফেস ব্যবহার করে, তাহলে আপনি খুঁজে বের করতে আপনার অ্যাপ পরীক্ষা করতে পারেন। যদি আপনার অ্যাপ নন-SDK ইন্টারফেসের উপর নির্ভর করে, তাহলে আপনার SDK বিকল্পগুলিতে স্থানান্তরের পরিকল্পনা শুরু করা উচিত। তা সত্ত্বেও, আমরা বুঝি যে কিছু অ্যাপে নন-SDK ইন্টারফেস ব্যবহার করার জন্য বৈধ ব্যবহারের ক্ষেত্রে রয়েছে। আপনি যদি আপনার অ্যাপে একটি বৈশিষ্ট্যের জন্য একটি নন-SDK ইন্টারফেস ব্যবহার করার বিকল্প খুঁজে না পান তবে আপনাকে একটি নতুন সর্বজনীন API অনুরোধ করা উচিত।
如需详细了解此 Android 版本中的变更,请参阅 Android 14 中有关限制非 SDK 接口的更新。如需全面了解有关非 SDK 接口的详细信息,请参阅对非 SDK 接口的限制。