与以前的版本一样,Android 15 包含一些行为变更,这些变更可能会影响您的应用。以下行为变更仅影响以 Android 15 或更高版本为目标平台的应用。如果您的应用以 Android 15 或更高版本为目标平台,您应该修改自己的应用以适当地支持这些行为(如果适用)。
此外,请务必查看对 Android 15 上运行的所有应用都有影响的行为变更列表(无论应用的 targetSdkVersion
如何)。
核心功能
Android 15 修改或扩展了 Android 系统的各种核心功能。
前台服务的变更
我们将对 Android 15 中的前台服务做出以下更改。
数据同步前台服务超时行为
Android 15 对于以 Android 15 或更高版本为目标平台的应用,在 dataSync
中引入了新的超时行为。此行为也适用于新的 mediaProcessing
前台服务类型。
系统允许应用的 dataSync
服务在 24 小时内运行总共 6 小时,之后系统会调用正在运行的服务的 Service.onTimeout(int, int)
方法(在 Android 15 中引入)。此时,服务只有几秒钟的时间来调用 Service.stopSelf()
。当调用 Service.onTimeout()
时,该服务不再被视为前台服务。如果服务未调用 Service.stopSelf()
,则会发生故障,并显示以下错误消息:“A for 前台服务 (<fgs_type> does not stop in their timeout:
<component_name>)”。在 Beta 版 2 中,失败消息显示为 ANR,但在未来的 Beta 版中,此失败消息将抛出自定义异常。
为避免此行为变更出现问题,您可以执行以下一项或多项操作:
- 让您的服务实现新的
Service.onTimeout(int, int)
方法。当应用收到回调时,请确保在几秒钟内调用stopSelf()
。(如果您没有立即停止应用,系统会生成故障。) - 确保应用的
dataSync
服务在任何 24 小时内的运行时间总共不超过 6 小时(除非用户与应用互动,请重置计时器)。 - 仅因直接用户互动而启动
dataSync
前台服务;由于您的应用在服务启动时正处于前台,因此在它进入后台后,您的服务有整整六个小时的时间。 - 请使用替代 API,而不要使用
dataSync
前台服务。
如果应用的 dataSync
前台服务在过去 24 小时内运行了 6 小时,那么除非用户已将您的应用带到前台(这会重置计时器),否则您无法启动其他 dataSync
前台服务。如果您尝试启动另一个 dataSync
前台服务,系统会抛出 ForegroundServiceStartNotAllowedException
,并显示“时间限制已用完前台服务类型 dataSync 的时间限制”这样的错误消息。
新增媒体处理前台服务类型
Android 15 引入了一种新的前台服务类型 mediaProcessing
。此服务类型适用于对媒体文件进行转码等操作。例如,媒体应用可能下载音频文件,并且需要将其转换为其他格式才能播放。您可以使用 mediaProcessing
前台服务来确保即使应用在后台运行,转换也会继续进行。
系统允许应用的 mediaProcessing
服务在 24 小时内总共运行 6 小时,之后系统会调用正在运行的服务的 Service.onTimeout(int, int)
方法(在 Android 15 中引入)。此时,服务只有几秒钟的时间来调用 Service.stopSelf()
。如果服务未调用 Service.stopSelf()
,则会发生故障,并显示以下错误消息:“A for the preground service of <fgs_type> was not stop in their timeout:
<component_name>”。在 Beta 版 2 中,失败消息显示为 ANR,但在未来的 Beta 版中,此失败消息将抛出自定义异常。
为避免 ANR,您可以执行以下任一操作:
- 让您的服务实现新的
Service.onTimeout(int, int)
方法。当应用收到回调时,请确保在几秒钟内调用stopSelf()
。(如果您没有立即停止应用,系统会生成故障。) - 确保应用的
mediaProcessing
服务在任何 24 小时内的运行时间总计不超过 6 小时(除非用户与应用互动,请重置计时器)。 - 仅因直接用户互动而启动
mediaProcessing
前台服务;由于您的应用在服务启动时正处于前台,因此在它进入后台后,您的服务有整整六个小时的时间。 - 请使用替代 API(例如 WorkManager),而不要使用
mediaProcessing
前台服务。
如果应用的 mediaProcessing
前台服务在过去 24 天内已经运行了 6 小时,那么除非用户已将您的应用带到前台(这会重置计时器),否则您无法启动其他 mediaProcessing
前台服务。如果您尝试启动另一个 mediaProcessing
前台服务,系统会抛出 ForegroundServiceStartNotAllowedException
,并显示“时间限制已用尽前台服务类型 mediaProcessing”这样的错误消息。
如需详细了解 mediaProcessing
服务类型,请参阅 Android 15 前台服务类型的变更:媒体处理。
对启动前台服务的 BOOT_COMPLETED
广播接收器的限制
There are new restrictions on BOOT_COMPLETED
broadcast receivers launching
foreground services. BOOT_COMPLETED
receivers are not allowed to launch the
following types of foreground services:
dataSync
camera
mediaPlayback
phoneCall
mediaProjection
microphone
(this restriction has been in place formicrophone
since Android 14)
If a BOOT_COMPLETED
receiver tries to launch any of those types of foreground
services, the system throws ForegroundServiceStartNotAllowedException
.
限制在应用拥有 SYSTEM_ALERT_WINDOW
权限的情况下启动前台服务
以前,如果应用拥有 SYSTEM_ALERT_WINDOW
权限,那么即使该应用当前在后台运行,它也可以启动前台服务(如不受后台启动限制的豁免中所述)。
如果应用以 Android 15 为目标平台,此豁免范围现在会更严格。该应用现在需要具有 SYSTEM_ALERT_WINDOW
权限,并且还具有可见的叠加窗口。也就是说,在您启动前台服务之前,应用需要先启动 TYPE_APPLICATION_OVERLAY
窗口,并且该窗口必须处于可见状态。
如果您的应用尝试在不满足这些新要求的情况下从后台启动前台服务(并且没有其他某些豁免),系统会抛出 ForegroundServiceStartNotAllowedException
。
如果您的应用声明 SYSTEM_ALERT_WINDOW
权限并从后台启动前台服务,则可能会受到此项变更的影响。如果您的应用收到 ForegroundServiceStartNotAllowedException
,请检查应用的操作顺序,并确保应用在尝试从后台启动前台服务之前已具备有效的叠加窗口。您可以通过调用 View.getWindowVisibility()
检查叠加层窗口当前是否可见,也可以替换 View.onWindowVisibilityChanged()
,以便在可见性发生变化时收到通知。
更改了应用何时可以修改勿扰模式的全局状态
以 Android 15 为目标平台的应用无法再更改设备上的全局状态或勿扰 (DND) 政策(通过修改用户设置或关闭 DND 模式)。相反,应用必须提供一个 AutomaticZenRule
,系统会将后者合并到一个具有现有最严格的政策胜出方案的全局政策中。调用之前影响全局状态的现有 API(setInterruptionFilter
、setNotificationPolicy
)会导致创建或更新隐式 AutomaticZenRule
,该 AutomaticZenRule
根据这些 API 调用的调用周期而开启或关闭。
请注意,只有在应用调用 setInterruptionFilter(INTERRUPTION_FILTER_ALL)
且预期调用会停用之前由其所有者激活的 AutomaticZenRule
时,此变更才会影响可观察的行为。
OpenJDK 17 变更
Android 15 会继续更新 Android 的核心库,以与最新 OpenJDK LTS 版本中的功能保持一致。
对于以 Android 15 为目标平台的应用,以下变更可能会影响应用兼容性:
字符串格式设置 API 的变化:在使用以下
String.format()
和Formatter.format()
API 时,现在对参数索引、标志、宽度和精度的验证更为严格:String.format(String, Object[])
String.format(Locale, String, Object[])
Formatter.format(String, Object[])
Formatter.format(Locale, String, Object[])
例如,使用参数索引 0 时(格式字符串中的
%0
)会抛出以下异常:IllegalFormatArgumentIndexException: Illegal format argument index = 0
在这种情况下,可以通过在格式字符串中使用
%1
的参数索引 1 来解决此问题。对
Arrays.asList(...).toArray()
组件类型的更改:使用Arrays.asList(...).toArray()
时,所生成数组的组件类型现在是Object
,而不是底层数组元素的类型。因此,以下代码会抛出ClassCastException
:String[] elements = (String[]) Arrays.asList("one", "two").toArray();
在这种情况下,若要在结果数组中保留
String
的组成部分类型,您可以改用Collection.toArray(Object[])
:String[] elements = Arrays.asList("two", "one").toArray(new String[0]);
语言代码处理方面的变更:使用
Locale
API 时,希伯来语、意第绪语和印度尼西亚语的语言代码不再转换为过时的形式(希伯来语:iw
、意第绪语:ji
和印度尼西亚语:in
)。在为其中一个语言区域指定语言代码时,请改用 ISO 639-1 中的代码:yi
、Yid1(希伯来语):yi
。he
id
随机 int 序列变更:在 https://bugs.openjdk.org/browse/JDK-8301574 中做出更改后,以下
Random.ints()
方法现在返回的数字序列现在与Random.nextInt()
方法不同:通常,此变更不会导致应用破坏行为,但您的代码不应期望从
Random.ints()
方法生成的序列与Random.nextInt()
匹配。
安全
Android 15 包含一些有助于提升系统安全性的变更,以帮助保护应用和用户免受恶意应用的侵害。
安全的后台 activity 启动
Android 15 protects users from malicious apps and gives them more control over their devices by adding changes that prevent malicious background apps from bringing other apps to the foreground, elevating their privileges, and abusing user interaction. Background activity launches have been restricted since Android 10 (API level 29).
Block apps that don't match the top UID on the stack from launching activities
Malicious apps can launch another app's activity within the same task, then
overlay themselves on top, creating the illusion of being that app. This "task
hijacking" attack bypasses current background launch restrictions because it all
occurs within the same visible task. To mitigate this risk, Android 15 adds a
flag that blocks apps that don't match the top UID on the stack from launching
activities. To opt in for all of your app's activities, update the
allowCrossUidActivitySwitchFromBelow
attribute in your app's AndroidManifest.xml
file:
<application android:allowCrossUidActivitySwitchFromBelow="false" >
The new security measures are active if all of the following are true:
- The app performing the launch targets Android 15.
- The app on top of the task stack targets Android 15.
- Any visible activity has opted in to the new protections
If the security measures are enabled, apps might return home, rather than the last visible app, if they finish their own task.
Other changes
In addition to the restriction for UID matching, these other changes are also included:
- Change
PendingIntent
creators to block background activity launches by default. This helps prevent apps from accidentally creating aPendingIntent
that could be abused by malicious actors. - Don't bring an app to the foreground unless the
PendingIntent
sender allows it. This change aims to prevent malicious apps from abusing the ability to start activities in the background. By default, apps are not allowed to bring the task stack to the foreground unless the creator allows background activity launch privileges or the sender has background activity launch privileges. - Control how the top activity of a task stack can finish its task. If the top activity finishes a task, Android will go back to whichever task was last active. Moreover, if a non-top activity finishes its task, Android will go back to the home screen; it won't block the finish of this non-top activity.
- Prevent launching arbitrary activities from other apps into your own task. This change prevents malicious apps from phishing users by creating activities that appear to be from other apps.
- Block non-visible windows from being considered for background activity launches. This helps prevent malicious apps from abusing background activity launches to display unwanted or malicious content to users.
更安全的 intent
Android 15 引入了新的安全措施,使 intent 更加安全可靠。这些变更旨在防止潜在漏洞和被恶意应用利用的 intent 滥用。Android 15 中对 intent 的安全性进行了两项主要改进:
- 匹配目标 intent 过滤器:定位特定组件的 intent 必须准确匹配目标的 intent 过滤器规范。如果您通过发送 intent 来启动其他应用的 activity,则目标 intent 组件需要与接收 activity 声明的 intent 过滤器保持一致。
- intent 必须具有操作:没有操作的 intent 将不再与任何 intent 过滤器匹配。这意味着,用于启动 activity 或服务的 intent 必须具有明确定义的操作。
- 待处理 intent:待处理 intent 的创建者被视为封装 intent 的发送者,而非待处理 intent 的发送者
Kotlin
fun onCreate() { StrictMode.setVmPolicy(VmPolicy.Builder() .detectUnsafeIntentLaunch() .build() ) }
Java
public void onCreate() { StrictMode.setVmPolicy(new VmPolicy.Builder() .detectUnsafeIntentLaunch() .build()); }
用户体验和系统界面
Android 15 包含一些旨在打造更一致、更直观的用户体验的变更。
窗口边衬区更改
Android 15 中有两个与窗口边衬区相关的变更:默认强制执行无边框模式;还存在配置变更,例如系统栏的默认配置。
全面强制执行
Apps are edge-to-edge by default on devices running Android 15 if the app is targeting Android 15 (API level 35).
![](https://developer.android.google.cn/static/about/versions/15/images/edge-to-edge-1.png?authuser=2&hl=lv)
This is a breaking change that might negatively impact your app's UI. The changes affect the following UI areas:
- Gesture handle navigation bar
- Transparent by default.
- Bottom offset is disabled so content draws behind the system navigation bar unless insets are applied.
setNavigationBarColor
andR.attr#navigationBarColor
are deprecated and don't affect gesture navigation.setNavigationBarContrastEnforced
andR.attr#navigationBarContrastEnforced
continue to have no effect on gesture navigation.
- 3-button navigation
- Opacity set to 80% by default, with color possibly matching the window background.
- Bottom offset disabled so content draws behind the system navigation bar unless insets are applied.
setNavigationBarColor
andR.attr#navigationBarColor
are set to match the window background by default. The window background must be a color drawable for this default to apply. This API is deprecated but continues to affect 3-button navigation.setNavigationBarContrastEnforced
andR.attr#navigationBarContrastEnforced
is true by default, which adds an 80% opaque background across 3-button navigation.
- Status bar
- Transparent by default.
- The top offset is disabled so content draws behind the status bar unless insets are applied.
setStatusBarColor
andR.attr#statusBarColor
are deprecated and have no effect on Android 15.setStatusBarContrastEnforced
andR.attr#statusBarContrastEnforced
are deprecated but still have an effect on Android 15.
- Display cutout
layoutInDisplayCutoutMode
of non-floating windows must beLAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS
.SHORT_EDGES
,NEVER
andDEFAULT
are interpreted asALWAYS
so that users don't see a Black bar caused by the display cutout and appear edge-to-edge.
The following example shows an app before and after targeting Android 15 (API level 35), and before and after applying insets.
![](https://developer.android.google.cn/static/about/versions/15/images/edge-to-edge-4.png?authuser=2&hl=lv)
![](https://developer.android.google.cn/static/about/versions/15/images/edge-to-edge-6.png?authuser=2&hl=lv)
![](https://developer.android.google.cn/static/about/versions/15/images/edge-to-edge-2.png?authuser=2&hl=lv)
What to check if your app is already edge-to-edge
If your app is already edge-to-edge and applies insets, you are mostly unimpacted, except in the following scenarios. However, even if you think you aren't impacted, we recommend you test your app.
- You have a non-floating window, such as an
Activity
that usesSHORT_EDGES
,NEVER
orDEFAULT
instead ofLAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS
. If your app crashes on launch, this might be due to your splashscreen. You can either upgrade the core splashscreen dependency to 1.2.0-alpha01 or later or setwindow.attributes.layoutInDisplayCutoutMode = WindowManager.LayoutInDisplayCutoutMode.always
. - There might be lower-traffic screens with occluded UI. Verify these
less-visited screens don't have occluded UI. Lower-traffic screens include:
- Onboarding or sign-in screens
- Settings pages
What to check if your app is not already edge-to-edge
If your app is not already edge-to-edge, you are most likely impacted. In addition to the scenarios for apps that are already edge-to-edge, you should consider the following:
- If your app uses Material 3 Components (
androidx.compose.material3
) in compose, such asTopAppBar
,BottomAppBar
, andNavigationBar
, these components are likely not impacted because they automatically handle insets. - If your app is using Material 2 Components (
androidx.compose.material
) in Compose, these components don't automatically handle insets. However, you can get access to the insets and apply them manually. In androidx.compose.material 1.6.0 and later, use thewindowInsets
parameter to apply the insets manually forBottomAppBar
,TopAppBar
,BottomNavigation
, andNavigationRail
. Likewise, use thecontentWindowInsets
parameter forScaffold
. - If your app uses views and Material Components
(
com.google.android.material
), most views-based Material Components such asBottomNavigationView
,BottomAppBar
,NavigationRailView
, orNavigationView
, handle insets and require no additional work. However, you need to addandroid:fitsSystemWindows="true"
if usingAppBarLayout
. - For custom composables, apply the insets manually as padding. If your
content is within a
Scaffold
, you can consume insets using theScaffold
padding values. Otherwise, apply padding using one of theWindowInsets
. - If your app is using views and
BottomSheet
,SideSheet
or custom containers, apply padding usingViewCompat.setOnApplyWindowInsetsListener
. ForRecyclerView
, apply padding using this listener and also addclipToPadding="false"
.
What to check if your app must offer custom background protection
If your app must offer custom background protection to 3-button navigation or
the status bar, you app should place a composable or view behind the system bar
using WindowInsets.Type#tappableElement()
to get the 3-button
navigation bar height or WindowInsets.Type#statusBars
.
Additional edge-to-edge resources
See the Edge to Edge Views and Edge to Edge Compose guides for additional considerations on applying insets.
Deprecated APIs
The following APIs are now deprecated:
R.attr#enforceStatusBarContrast
R.attr#navigationBarColor
R.attr#navigationBarDividerColor
R.attr#statusBarColor
Window#getNavigationBarColor
Window#getNavigationBarDividerColor
Window#getStatusBarColor
Window#isStatusBarContrastEnforced
Window#setDecorFitsSystemWindows
Window#setNavigationBarColor
Window#setNavigationBarDividerColor
Window#setStatusBarColor
Window#setStatusBarContrastEnforced
稳定配置
If your app targets Android 15 (API level 35) or higher, Configuration
no
longer excludes the system bars. If you use the screen size in the
Configuration
class for layout calculation, you should replace it with better
alternatives like an appropriate ViewGroup
, WindowInsets
, or
WindowMetricsCalculator
depending on your need.
Configuration
has been available since API 1. It is typically obtained from
Activity.onConfigurationChanged
. It provides information like window density,
orientation, and sizes. One important characteristic about the window sizes
returned from Configuration
is that it previously excluded the system bars.
The configuration size is typically used for resource selection, such as
/res/layout-h500dp
, and this is still a valid use case. However, using it for
layout calculation has always been discouraged. If you do so, you should move
away from it now. You should replace the use of Configuration
with something
more suitable depending on your use case.
If you use it to calculate the layout, use an appropriate ViewGroup
, such as
CoordinatorLayout
or ConstraintLayout
. If you use it to determine the height
of the system navbar, use WindowInsets
. If you want to know the current size
of your app window, use computeCurrentWindowMetrics
.
The following list describes the fields affected by this change:
Configuration.screenWidthDp
andscreenHeightDp
sizes no longer exclude the system bars.Configuration.smallestScreenWidthDp
is indirectly affected by changes toscreenWidthDp
andscreenHeightDp
.Configuration.orientation
is indirectly affected by changes toscreenWidthDp
andscreenHeightDp
on close-to-square devices.Display.getSize(Point)
is indirectly affected by the changes inConfiguration
. This was deprecated beginning in API level 30.Display.getMetrics()
has already worked like this since API level 33.
EnglishTextHeight 属性默认为 true
对于以 Android 15 为目标平台的应用,elegantTextHeight
TextView
属性默认变为 true
,将默认使用的紧凑字体替换为一些具有较大垂直指标的脚本,并且这种字体更易于阅读。紧凑字体的引入是为了防止破坏布局;Android 13(API 级别 33)允许文本布局利用 fallbackLineSpacing
属性拉伸垂直高度,以防止许多此类破坏。
在 Android 15 中,紧凑字体仍保留在系统中,因此您的应用可以将 elegantTextHeight
设置为 false
,以获得与之前相同的行为,但即将在未来版本中提供支持。因此,如果您的应用支持以下文字:阿拉伯语、老挝语、缅甸、泰米尔语、古吉拉特语、卡纳达语、马拉雅拉姆语、奥里亚语、泰卢固语或泰语,请将 elegantTextHeight
设置为 true
,以测试应用。
![](https://developer.android.google.cn/static/about/versions/15/images/elegant-text-height-before.png?authuser=2&hl=lv)
elegantTextHeight
行为。![](https://developer.android.google.cn/static/about/versions/15/images/elegant-text-height-after.png?authuser=2&hl=lv)
elegantTextHeight
行为。复杂字母形状的 TextView 宽度变化
在以前的 Android 版本中,一些采用复杂形状的草体字体或语言可能会在上一个或下一个字符区域中绘制字母。在某些情况下,此类字母会在开始或结束位置被截断。从 Android 15 开始,TextView
会分配宽度来为此类字母绘制足够的空间,并允许应用请求左侧添加额外的内边距以防止被裁剪。
由于此变更会影响 TextView
确定宽度的方式,因此如果应用以 Android 15 或更高版本为目标平台,TextView
会默认分配更多宽度。您可以通过对 TextView
调用 setUseBoundsForWidth
API 来启用或停用此行为。
由于添加左侧内边距可能会导致现有布局未对齐,因此默认情况下,系统不会添加内边距,即使对于以 Android 15 或更高版本为目标平台的应用也是如此。不过,您可以通过调用 setShiftDrawingOffsetForStartOverhang
添加额外的内边距以防止裁剪。
以下示例展示了这些更改如何改进某些字体和语言的文本布局。
![](https://developer.android.google.cn/static/about/versions/15/images/cursive-clipped.png?authuser=2&hl=lv)
<TextView android:fontFamily="cursive" android:text="java" />
![](https://developer.android.google.cn/static/about/versions/15/images/cursive-noclipping.png?authuser=2&hl=lv)
<TextView android:fontFamily="cursive" android:text="java" android:useBoundsForWidth="true" android:shiftDrawingOffsetForStartOverhang="true" />
![](https://developer.android.google.cn/static/about/versions/15/images/thai-clipped.png?authuser=2&hl=lv)
<TextView android:text="คอมพิวเตอร์" />
![](https://developer.android.google.cn/static/about/versions/15/images/thai-noclipping.png?authuser=2&hl=lv)
<TextView android:text="คอมพิวเตอร์" android:useBoundsForWidth="true" android:shiftDrawingOffsetForStartOverhang="true" />
EditText 的语言区域感知型默认行高
在以前的 Android 版本中,文本布局拉伸了文本的高度,使其适应与当前语言区域匹配的字体的行高。例如,如果内容是日语,由于日语字体的行高比拉丁字体的行高略大,因此文本的高度就略大了。不过,尽管行高存在这些差异,但无论使用何种语言区域,EditText
元素的大小都是一致的,如下图所示:
![](https://developer.android.google.cn/static/about/versions/15/images/locale-aware-line-height-before.png?authuser=2&hl=lv)
EditText
元素的框,这些框可以包含英语 (en)、日语 (ja) 和缅甸语 (my) 的文本。EditText
的高度相同,即使这两种语言的行高不同。对于以 Android 15 为目标平台的应用,系统现在会为 EditText
预留最小行高,以匹配指定语言区域的参考字体,如下图所示:
![](https://developer.android.google.cn/static/about/versions/15/images/locale-aware-line-height-after.png?authuser=2&hl=lv)
EditText
元素的框,这些框可以包含英语 (en)、日语 (ja) 和缅甸语 (my) 的文本。EditText
的高度现在包含空间,可适应这些语言字体的默认行高。如果需要,您的应用可以通过将 useLocalePreferredLineHeightForMinimum
属性设置为 false
来恢复之前的行为,并且可以通过 Kotlin 和 Java 中的 setMinimumFontMetrics
API 设置自定义最小行业指标。
摄像头和媒体
对于以 Android 15 或更高版本为目标平台的应用,Android 15 对相机和媒体行为做出了以下变更。
请求音频焦点的限制
以 Android 15 为目标平台的应用必须是热门应用或运行与音频相关的前台服务,才能请求音频焦点。如果应用在不符合其中任何一项要求时尝试请求焦点,调用会返回 AUDIOFOCUS_REQUEST_FAILED
。
如果前台服务的类型为 mediaPlayback
、camera
、microphone
或 phoneCall
,则会被视为与音频相关。
如需详细了解音频焦点,请参阅管理音频焦点。
更新后的非 SDK 限制
Android 15 包含更新后的受限非 SDK 接口列表(基于与 Android 开发者之间的协作以及最新的内部测试)。在限制使用非 SDK 接口之前,我们会尽可能确保有可用的公开替代方案。
如果您的应用并非以 Android 15 为目标平台,其中一些变更可能不会立即对您产生影响。不过,虽然您的应用可以访问某些非 SDK 接口(具体取决于应用的目标 API 级别),但使用任何非 SDK 方法或字段始终存在导致应用出问题的显著风险。
如果您不确定自己的应用是否使用了非 SDK 接口,则可以测试该应用进行确认。如果您的应用依赖于非 SDK 接口,则应开始计划迁移到 SDK 替代方案。不过,我们知道某些应用具有使用非 SDK 接口的有效用例。如果您无法为应用中的功能找到无需使用非 SDK 接口的替代方案,则应请求新的公共 API。
如需详细了解此 Android 版本中的变更,请参阅 Android 15 中有关限制非 SDK 接口的更新。如需全面了解有关非 SDK 接口的详细信息,请参阅对非 SDK 接口的限制。