功能和 API 概览

Android 15 面向开发者引入了一些出色的功能和 API。以下部分总结了这些功能，可帮助您开始使用相关 API。

如需查看添加、修改和移除的 API 的详细列表，请参阅 API 差异报告。如需详细了解添加的 API，请访问 Android API 参考文档。对于 Android 15，请查找在 API 级别 35 中添加的 API。如需了解平台变更可能会在哪些方面影响您的应用，请务必查看会影响以 Android 15 为目标平台的应用和所有应用的 Android 15 行为变更。

摄像头和媒体

Android 15 包含多种功能，可改进相机和媒体体验，并让您可以使用工具和硬件来支持创作者在 Android 设备上实现自己的愿景。

如需详细了解 Android 媒体和相机的最新功能和开发者解决方案，请观看 Google I/O 大会上的构建现代 Android 媒体和相机体验演讲。

弱光增强

Android 15 introduces Low Light Boost, an auto-exposure mode available to both Camera 2 and the night mode camera extension. Low Light Boost adjusts the exposure of the Preview stream in low-light conditions. This is different from how the night mode camera extension creates still images, because night mode combines a burst of photos to create a single, enhanced image. While night mode works very well for creating a still image, it can't create a continuous stream of frames, but Low Light Boost can. Thus, Low Light Boost enables camera capabilities, such as:

  • Providing an enhanced image preview, so users are better able to frame their low-light pictures
  • Scanning QR codes in low light

If you enable Low Light Boost, it automatically turns on when there's a low light level, and turns off when there's more light.

Apps can record off the Preview stream in low-light conditions to save a brightened video.

For more information, see Low Light Boost.

应用内相机控件

Android 15 adds an extension for more control over the camera hardware and its algorithms on supported devices:

  • Advanced flash strength adjustments enabling precise control of flash intensity in both SINGLE and TORCH modes while capturing images.

HDR 余量控制

Android 15 chooses HDR headroom that is appropriate for the underlying device capabilities and bit-depth of the panel. For pages that have lots of SDR content, such as a messaging app displaying a single HDR thumbnail, this behavior can end up adversely influencing the perceived brightness of the SDR content. Android 15 lets you control the HDR headroom with setDesiredHdrHeadroom to strike a balance between SDR and HDR content.

The brightness of SDR UI elements on the left screen appears to be more uniform than the brightness on the right screen, which simulates possible headroom issues when HDR and SDR content are mixed. By adjusting the HDR headroom, you can achieve a better balance between the SDR and HDR content.

响度控制

Android 15 引入了对 CTA-2075 响度标准的支持，可帮助您避免音频响度不一致，并确保用户在切换内容时不必不断调整音量。系统利用输出设备（头戴式耳机和扬声器）的已知特性以及 AAC 音频内容中提供的响度元数据，智能调整音频响度和动态范围压缩级别。

如需启用此功能，您需要确保 AAC 内容中提供响度元数据，并在应用中启用平台功能。为此，您可以通过使用关联的 AudioTrack 中的音频会话 ID 调用其 create 工厂方法来实例化 LoudnessCodecController 对象；这会自动开始应用音频更新。您可以传递 OnLoudnessCodecUpdateListener 来修改或过滤响度参数，然后再将其应用于 MediaCodec。

// Media contains metadata of type MPEG_4 OR MPEG_D
val mediaCodec = …
val audioTrack = AudioTrack.Builder()
                                .setSessionId(sessionId)
                                .build()
...
// Create new loudness controller that applies the parameters to the MediaCodec
try {
   val lcController = LoudnessCodecController.create(mSessionId)
   // Starts applying audio updates for each added MediaCodec
}

AndroidX media3 ExoPlayer 也将更新，以使用 LoudnessCodecController API，可实现无缝应用集成。

虚拟 MIDI 2.0 设备

Android 13 added support for connecting to MIDI 2.0 devices using USB, which communicate using Universal MIDI Packets (UMP). Android 15 extends UMP support to virtual MIDI apps, enabling composition apps to control synthesizer apps as a virtual MIDI 2.0 device just like they would with an USB MIDI 2.0 device.

更高效的 AV1 软件解码

dav1d 徽标

dav1d 是 VideoLAN 推出的热门 AV1 软件解码器，适用于不支持硬件 AV1 解码的 Android 设备。与旧版 AV1 软件解码器相比，dav1d 的性能最高可提升 3 倍，让更多用户（包括一些低端和中端设备）能够播放高清 AV1 视频。

您的应用需要选择启用 dav1d，方法是通过名称 "c2.android.av1-dav1d.decoder" 调用它。在后续更新中，dav1d 将成为默认的 AV1 软件解码器。此支持已标准化，并向后移植到收到 Google Play 系统更新的 Android 11 设备。

开发者工作效率和工具

虽然我们为提高开发者的工作效率所做的大部分工作都集中在 Android Studio、Jetpack Compose 和 Android Jetpack 库等工具上，但我们始终在寻找各种方法，通过平台帮助您更轻松地实现愿景。

OpenJDK 17 更新

Android 15 将继续更新 Android 的核心库，以与最新 OpenJDK LTS 版本中的功能保持一致。

其中包含以下主要功能和改进：

这些 API 会通过 Google Play 系统更新在搭载 Android 12（API 级别 31）及更高版本的 10 亿多部设备上更新，以便您以最新的编程功能为目标平台。

PDF 改进

Android 15 includes substantial improvements to the PdfRenderer APIs. Apps can incorporate advanced features such as rendering password-protected files, annotations, form editing, searching, and selection with copy. Linearized PDF optimizations are supported to speed local PDF viewing and reduce resource use. The Jetpack PDF library uses these APIs to simplify adding PDF viewing capabilities to your app.

The latest updates to PDF rendering include features such as searching an embedded PDF file.

The PdfRenderer has been moved to a module that can be updated using Google Play system updates independent of the platform release, and we're supporting these changes back to Android 11 (API level 30) by creating a compatible pre-Android 15 version of the API surface, called PdfRendererPreV.

自动切换语言的优化

Android 14 added on-device, multi-language recognition in audio with automatic switching between languages, but this can cause words to get dropped, especially when languages switch with less of a pause between the two utterances. Android 15 adds additional controls to help apps tune this switching to their use case. EXTRA_LANGUAGE_SWITCH_INITIAL_ACTIVE_DURATION_TIME_MILLIS confines the automatic switching to the beginning of the audio session, while EXTRA_LANGUAGE_SWITCH_MATCH_SWITCHES deactivates the language switching after a defined number of switches. These options are particularly useful if you expect that there will be a single language spoken during the session that should be autodetected.

改进了 OpenType Variable Font API

Android 15 提高了 OpenType 可变字体的易用性。现在，您可以 基于可变字体创建 FontFamily 实例，而不指定 使用 buildVariableFamily API 绘制权重轴。文本渲染程序替换项 wght 轴的值，以与显示的文本匹配。

使用新的 API，这可以简化用于创建 Typeface 的代码 大量：

Kotlin

val newTypeface = Typeface.CustomFallbackBuilder(
            FontFamily.Builder(
                Font.Builder(assets, "RobotoFlex.ttf").build())
                    .buildVariableFamily())
    .build()

Java

Typeface newTypeface = Typeface.CustomFallbackBuilder(
            new FontFamily.Builder(
                new Font.Builder(assets, "RobotoFlex.ttf").build())
                    .buildVariableFamily())
    .build();

以前，如需创建相同的 Typeface，您需要更多代码：

Kotlin

val oldTypeface = Typeface.CustomFallbackBuilder(
            FontFamily.Builder(
                Font.Builder(assets, "RobotoFlex.ttf")
                    .setFontVariationSettings("'wght' 400")
                    .setWeight(400)
                    .build())
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 100")
                        .setWeight(100)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 200")
                        .setWeight(200)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 300")
                        .setWeight(300)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 500")
                        .setWeight(500)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 600")
                        .setWeight(600)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 700")
                        .setWeight(700)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 800")
                        .setWeight(800)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 900")
                        .setWeight(900)
                        .build()
                ).build()
        ).build()

Java

Typeface oldTypeface = new Typeface.CustomFallbackBuilder(
    new FontFamily.Builder(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 400")
            .setWeight(400)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 100")
            .setWeight(100)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 200")
            .setWeight(200)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 300")
            .setWeight(300)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 500")
            .setWeight(500)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 600")
            .setWeight(600)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 700")
            .setWeight(700)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 800")
            .setWeight(800)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 900")
            .setWeight(900)
            .build()
    )
    .build()
).build();

以下示例展示了如何同时使用新旧 API 创建 Typeface 呈现：

示例：使用新旧版本时字体渲染有何不同 API

在此示例中，使用旧 API 创建的 Typeface 不包含 为 350、450、550 和 650 创建准确的字体粗细 Font 实例，因此渲染程序会回退到最接近的权重。在 在此示例中，系统会渲染 300 而不是 350，渲染 400 而不是 450， 依此类推。相比之下，使用新 API 创建的 Typeface 会动态创建 给定权重的 Font 实例，因此系统会渲染 350 的准确权重， 450、550 和 650。

精细的换行控制

Starting in Android 15, a TextView and the underlying line breaker can preserve the given portion of text in the same line to improve readability. You can take advantage of this line break customization by using the <nobreak> tag in string resources or createNoBreakSpan. Similarly, you can preserve words from hyphenation by using the <nohyphen> tag or createNoHyphenationSpan.

For example, the following string resource doesn't include a line break, and renders with the text "Pixel 8 Pro." breaking in an undesirable place:

<resources>
    <string name="pixel8pro">The power and brains behind Pixel 8 Pro.</string>
</resources>

In contrast, this string resource includes the <nobreak> tag, which wraps the phrase "Pixel 8 Pro." and prevents line breaks:

<resources>
    <string name="pixel8pro">The power and brains behind <nobreak>Pixel 8 Pro.</nobreak></string>
</resources>

The difference in how these strings are rendered is shown in the following images:

Layout for a line of text where the phrase "Pixel 8 Pro." isn't wrapped using a <nobreak> tag.
Layout for the same line of text where the phrase "Pixel 8 Pro." is wrapped using a <nobreak> tag.

应用归档

Android and Google Play announced support for app archiving last year, allowing users to free up space by partially removing infrequently used apps from the device that were published using Android App Bundle on Google Play. Android 15 includes OS level support for app archiving and unarchiving, making it easier for all app stores to implement it.

Apps with the REQUEST_DELETE_PACKAGES permission can call the PackageInstaller requestArchive method to request archiving an installed app package, which removes the APK and any cached files, but persists user data. Archived apps are returned as displayable apps through the LauncherApps APIs; users will see a UI treatment to highlight that those apps are archived. If a user taps on an archived app, the responsible installer will get a request to unarchive it, and the restoration process can be monitored by the ACTION_PACKAGE_ADDED broadcast.

使用开发者选项在设备上启用 16 KB 模式

切换以 16KB 页面大小启动设备开发者选项，以便在 16 KB 模式下启动设备。

从 Android 15 QPR1 开始，您可以使用某些设备上提供的开发者选项，以 16 KB 模式启动设备并执行设备端测试。

此开发者选项适用于以下设备：

  • Pixel 8 和 Pixel 8 Pro（搭载 Android 15 QPR1 或更高版本）

    警告：由于 Android 15 QPR2 Beta 版 3 存在已知问题，在安装 Android 15 QPR2 Beta 版 3 并以 16 KB 模式启动设备后，Pixel 8 设备上的触摸屏无法正常使用。此问题不会影响 Pixel 8 Pro 设备。

  • Pixel 8a（搭载 Android 15 QPR1 或更高版本）

    警告：由于 Android 15 QPR2 Beta 版 3 存在已知问题，在安装 Android 15 QPR2 Beta 版 3 并以 16 KB 模式启动设备后，Pixel 8a 设备上的触摸屏无法正常使用。

  • Pixel 9、Pixel 9 Pro 和 Pixel 9 Pro XL（搭载 Android 15 QPR2 Beta 2 或更高版本）

图形

Android 15 带来了最新的图形改进，包括 ANGLE 以及 Canvas 图形系统的增强功能。

改进 Android 的 GPU 访问方式

Vulkan logo

Android hardware has evolved quite a bit from the early days where the core OS would run on a single CPU and GPUs were accessed using APIs based on fixed-function pipelines. The Vulkan® graphics API has been available in the NDK since Android 7.0 (API level 24) with a lower-level abstraction that better reflects modern GPU hardware, scales better to support multiple CPU cores, and offers reduced CPU driver overhead — leading to improved app performance. Vulkan is supported by all modern game engines.

Vulkan is Android's preferred interface to the GPU. Therefore, Android 15 includes ANGLE as an optional layer for running OpenGL® ES on top of Vulkan. Moving to ANGLE will standardize the Android OpenGL implementation for improved compatibility, and, in some cases, improved performance. You can test out your OpenGL ES app stability and performance with ANGLE by enabling the developer option in Settings -> System -> Developer Options -> Experimental: Enable ANGLE on Android 15.

The Android ANGLE on Vulkan roadmap

Roadmap of upcoming changes to the Android GPU APIs.

As part of streamlining our GPU stack, going forward we will be shipping ANGLE as the GL system driver on more new devices, with the future expectation that OpenGL/ES will be only available through ANGLE. That being said, we plan to continue support for OpenGL ES on all devices.

Recommended next steps

Use the developer options to select the ANGLE driver for OpenGL ES and test your app. For new projects, we strongly encourage using Vulkan for C/C++.

改进了画布

Android 15 continues our modernization of Android's Canvas graphics system with additional capabilities:

  • Matrix44 provides a 4x4 matrix for transforming coordinates that should be used when you want to manipulate the canvas in 3D.
  • clipShader intersects the current clip with the specified shader, while clipOutShader sets the clip to the difference of the current clip and the shader, each treating the shader as an alpha mask. This supports the drawing of complex shapes efficiently.

性能和电池

Android 将继续专注于帮助您提升应用的性能和质量。Android 15 引入了一些 API，可帮助您更高效地执行应用中的任务、优化应用性能，以及收集有关应用的数据分析。

如需了解省电最佳实践、调试网络和功耗，以及详细了解我们如何在 Android 15 及较新版本的 Android 中提高后台工作的电池效率，请参阅 Google I/O 大会上的 Improving battery efficiency of background work on Android 演讲。

ApplicationStartInfo API

In previous versions of Android, app startup has been a bit of a mystery. It was challenging to determine within your app whether it started from a cold, warm, or hot state. It was also difficult to know how long your app spent during the various launch phases: forking the process, calling onCreate, drawing the first frame, and more. When your Application class was instantiated, you had no way of knowing whether the app started from a broadcast, a content provider, a job, a backup, boot complete, an alarm, or an Activity.

The ApplicationStartInfo API on Android 15 provides all of this and more. You can even choose to add your own timestamps into the flow to help collect timing data in one place. In addition to collecting metrics, you can use ApplicationStartInfo to help directly optimize app startup; for example, you can eliminate the costly instantiation of UI-related libraries within your Application class when your app is starting up due to a broadcast.

详细的应用大小信息

Since Android 8.0 (API level 26), Android has included the StorageStats.getAppBytes API that summarizes the installed size of an app as a single number of bytes, which is a sum of the APK size, the size of files extracted from the APK, and files that were generated on the device such as ahead-of-time (AOT) compiled code. This number is not very insightful in terms of how your app is using storage.

Android 15 adds the StorageStats.getAppBytesByDataType([type]) API, which lets you get insight into how your app is using up all that space, including APK file splits, AOT and speedup related code, dex metadata, libraries, and guided profiles.

由应用管理的性能分析

Android 15 includes the ProfilingManager class, which lets you collect profiling information from within your app such as heap dumps, heap profiles, stack sampling, and more. It provides a callback to your app with a supplied tag to identify the output file, which is delivered to your app's files directory. The API does rate limiting to minimize the performance impact.

To simplify constructing profiling requests in your app, we recommend using the corresponding Profiling AndroidX API, available in Core 1.15.0-rc01 or higher.

SQLite 数据库方面的改进

Android 15 引入了 SQLite API，这些 API 可公开底层 SQLite 引擎的高级功能，以解决可能在应用中出现的特定性能问题。将 SQLite 更新到版本 3.44.3。

开发者应参阅 SQLite 性能最佳实践 以便充分利用其 SQLite 数据库，尤其是在处理大型 或运行对延迟敏感的查询时

Android 动态性能框架更新

Android 15 continues our investment in the Android Dynamic Performance Framework (ADPF), a set of APIs that allow games and performance intensive apps to interact more directly with power and thermal systems of Android devices. On supported devices, Android 15 adds ADPF capabilities:

  • A power-efficiency mode for hint sessions to indicate that their associated threads should prefer power saving over performance, great for long-running background workloads.
  • GPU and CPU work durations can both be reported in hint sessions, allowing the system to adjust CPU and GPU frequencies together to best meet workload demands.
  • Thermal headroom thresholds to interpret possible thermal throttling status based on headroom prediction.

To learn more about how to use ADPF in your apps and games, head over to the documentation.

隐私设置

Android 15 包含多种功能，可帮助应用开发者保护用户隐私。

屏幕录制检测

Android 15 adds support for apps to detect that they are being recorded. A callback is invoked whenever the app transitions between being visible or invisible within a screen recording. An app is considered visible if activities owned by the registering process's UID are being recorded. This way, if your app is performing a sensitive operation, you can inform the user that they're being recorded.

val mCallback = Consumer<Int> { state ->
  if (state == SCREEN_RECORDING_STATE_VISIBLE) {
    // We're being recorded
  } else {
    // We're not being recorded
  }
}

override fun onStart() {
   super.onStart()
   val initialState =
      windowManager.addScreenRecordingCallback(mainExecutor, mCallback)
   mCallback.accept(initialState)
}

override fun onStop() {
    super.onStop()
    windowManager.removeScreenRecordingCallback(mCallback)
}

扩展了 IntentFilter 功能

Android 15 builds in support for more precise Intent resolution through UriRelativeFilterGroup, which contains a set of UriRelativeFilter objects that form a set of Intent matching rules that must each be satisfied, including URL query parameters, URL fragments, and blocking or exclusion rules.

These rules can be defined in the AndroidManifest XML file with the <uri-relative-filter-group> tag, which can optionally include an android:allow tag. These tags can contain <data> tags that use existing data tag attributes as well as the android:query and android:fragment attributes.

Here's an example of the AndroidManifest syntax:

<intent-filter android:autoVerify="true">
  <action android:name="android.intent.action.VIEW" />
  <category android:name="android.intent.category.BROWSABLE" />
  <category android:name="android.intent.category.DEFAULT" />
  <data android:scheme="http" />
  <data android:scheme="https" />
  <data android:host="astore.com" />
  <uri-relative-filter-group>
    <data android:pathPrefix="/auth" />
    <data android:query="region=na" />
  </uri-relative-filter-group>
  <uri-relative-filter-group android:allow="false">
    <data android:pathPrefix="/auth" />
    <data android:query="mobileoptout=true" />
  </uri-relative-filter-group>
  <uri-relative-filter-group android:allow="false">
    <data android:pathPrefix="/auth" />
    <data android:fragmentPrefix="faq" />
  </uri-relative-filter-group>
</intent-filter>

私密空间

可通过解锁和锁定私密空间，在设备上显示或隐藏敏感应用。

借助私密空间，用户可以在设备上创建一个单独的空间，在额外的身份验证层保护下，防止敏感应用遭到窥探。私密空间使用单独的用户个人资料。用户可以选择使用设备锁定方式或为私密空间使用单独的锁定方式。

私密空间中的应用会显示在启动器的单独容器中，并且当私密空间处于锁定状态时，这些应用不会显示在“最近用过”视图、通知、“设置”和其他应用中。用户生成的内容和下载的内容（例如媒体内容或文件）以及账号在私密空间和主空间之间是分开的。在私密空间处于解锁状态时，您可以使用系统 Sharesheet 和照片选择器向应用授予对各个空间中内容的访问权限。

用户无法将现有应用及其数据移至私密空间。相反，用户可以在私密空间中选择安装选项，以便使用他们偏好的任意应用商店安装应用。私密空间中的应用会作为主空间中任何应用的单独副本进行安装（同一应用的新副本）。

当用户锁定私密空间时，系统会停止该个人资料。在个人资料停止运行时，私密空间中的应用将不再处于活动状态，无法执行前台或后台活动，包括显示通知。

我们建议您使用私密空间测试应用，以确保应用能按预期运行，尤其是当您的应用属于以下某一类别时：

查询用户对“选择照片访问权限”的最新选择

现在，如果应用获得了部分访问权限，则只能突出显示最近选择的照片和视频。此功能可以改善频繁请求访问照片和视频的应用的用户体验。如需在应用中使用此功能，请在通过 ContentResolver 查询 MediaStore 时启用 QUERY_ARG_LATEST_SELECTION_ONLY 参数。

Kotlin

val externalContentUri = MediaStore.Files.getContentUri("external")

val mediaColumns = arrayOf(
   FileColumns._ID,
   FileColumns.DISPLAY_NAME,
   FileColumns.MIME_TYPE,
)

val queryArgs = bundleOf(
   // Return only items from the last selection (selected photos access)
   QUERY_ARG_LATEST_SELECTION_ONLY to true,
   // Sort returned items chronologically based on when they were added to the device's storage
   QUERY_ARG_SQL_SORT_ORDER to "${FileColumns.DATE_ADDED} DESC",
   QUERY_ARG_SQL_SELECTION to "${FileColumns.MEDIA_TYPE} = ? OR ${FileColumns.MEDIA_TYPE} = ?",
   QUERY_ARG_SQL_SELECTION_ARGS to arrayOf(
       FileColumns.MEDIA_TYPE_IMAGE.toString(),
       FileColumns.MEDIA_TYPE_VIDEO.toString()
   )
)

Java

Uri externalContentUri = MediaStore.Files.getContentUri("external");

String[] mediaColumns = {
    FileColumns._ID,
    FileColumns.DISPLAY_NAME,
    FileColumns.MIME_TYPE
};

Bundle queryArgs = new Bundle();
queryArgs.putBoolean(MediaStore.QUERY_ARG_LATEST_SELECTION_ONLY, true);
queryArgs.putString(MediaStore.QUERY_ARG_SQL_SORT_ORDER, FileColumns.DATE_ADDED + " DESC");
queryArgs.putString(MediaStore.QUERY_ARG_SQL_SELECTION, FileColumns.MEDIA_TYPE + " = ? OR " + FileColumns.MEDIA_TYPE + " = ?");
queryArgs.putStringArray(MediaStore.QUERY_ARG_SQL_SELECTION_ARGS, new String[] {
    String.valueOf(FileColumns.MEDIA_TYPE_IMAGE),
    String.valueOf(FileColumns.MEDIA_TYPE_VIDEO)
});

Privacy Sandbox on Android

Android 15 includes the latest Android Ad Services extensions, incorporating the latest version of the Privacy Sandbox on Android. This addition is part of our work to develop technologies that improve user privacy and enable effective, personalized advertising experiences for mobile apps. Our privacy sandbox page has more information about the Privacy Sandbox on Android developer preview and beta programs to help you get started.

健康数据共享

Android 15 integrates the latest extensions around Health Connect by Android, a secure and centralized platform to manage and share app-collected health and fitness data. This update adds support for additional data types across fitness, nutrition, skin temperature, training plans, and more.

Skin temperature tracking allows users to store and share more accurate temperature data from a wearable or other tracking device.

Training plans are structured workout plans to help a user achieve their fitness goals. Training plans support includes a variety of completion and performance goals:

Learn more about the latest updates to Health Connect in Android in the Building adaptable experiences with Android Health talk from Google I/O.

分享应用界面

Android 15 支持应用屏幕共享，因此用户可以仅共享或录制应用窗口，而不是整个设备屏幕。此功能首次在 Android 14 QPR2 中启用，包含 MediaProjection 回调，可让您的应用自定义应用屏幕共享体验。请注意，对于以 Android 14（API 级别 34）或更高版本为目标平台的应用，每个 MediaProjection 捕获会话都需要征得用户同意。

用户体验和系统界面

Android 15 可让应用开发者和用户更好地控制和灵活地配置设备，以满足他们的需求。

如需详细了解如何利用 Android 15 中的最新改进来提升应用的用户体验，请观看 Google I/O 大会上的提升 Android 应用的用户体验演讲。

使用 Generated Previews API 实现更丰富的微件预览

Before Android 15, the only way to provide widget picker previews was to specify a static image or layout resource. These previews often differ significantly from the look of the actual widget when it is placed on the home screen. Also, static resources can't be created with Jetpack Glance, so a Glance developer had to screenshot their widget or create an XML layout to have a widget preview.

Android 15 adds support for generated previews. This means that app widget providers can generate RemoteViews to use as the picker preview, instead of a static resource.

Apps can provide Remote Views to the Widget Picker, so they can update the content in the picker to be more representative of what the user will see.

Push API

Apps can provide generated previews through a push API. Apps can provide previews at any point in their lifecycle, and don't receive an explicit request from the host to provide previews. Previews are persisted in AppWidgetService, and hosts can request them on-demand. The following example loads an XML widget layout resource and sets it as the preview:

AppWidgetManager.getInstance(appContext).setWidgetPreview(
   ComponentName(
       appContext,
       SociaLiteAppWidgetReceiver::class.java
   ),
   AppWidgetProviderInfo.WIDGET_CATEGORY_HOME_SCREEN,
   RemoteViews("com.example", R.layout.widget_preview)
)

The expected flow is:

  1. At any time, the widget provider calls setWidgetPreview. The provided previews are persisted in AppWidgetService with other provider info.
  2. setWidgetPreview notifies hosts of an updated preview through the AppWidgetHost.onProvidersChanged callback. In response, the widget host reloads all of its provider information.
  3. When displaying a widget preview, the host checks AppWidgetProviderInfo.generatedPreviewCategories, and if the chosen category is available, calls AppWidgetManager.getWidgetPreview to return the saved preview for this provider.

When to call setWidgetPreview

Because there is no callback to provide previews, apps can choose to send previews at any point when they are running. How often to update the preview depends on the widget's use case.

The following list describes the two main categories of preview use cases:

  • Providers that show real data in their widget previews, such as personalized or recent information. These providers can set the preview once the user has signed in or has done initial configuration in their app. After this, they can set up a periodic task to update the previews at their chosen cadence. Examples of this type of widget could be a photo, calendar, weather or news widget.
  • Providers that show static information in previews or quick-action widgets that don't display any data. These providers can set previews once, when the app first launches. Examples of this type of widget include a drive quick actions widget or chrome shortcuts widget.

Some providers might show static previews on the hub mode picker, but real information on the homescreen picker. These providers should follow the guidance for both of these use cases to set previews.

画中画

Android 15 对画中画 (PiP) 模式进行了更改，确保在进入画中画模式时实现更流畅的转换。对于在主界面上叠加界面元素的应用，这将非常有用，因为这些元素会进入 PiP。

开发者使用 onPictureInPictureModeChanged 回调来定义用于切换叠加界面元素可见性的逻辑。当 PiP 进入或退出动画完成时，系统会触发此回调。从 Android 15 开始，PictureInPictureUiState 类包含另一种状态。

在这种界面状态下，以 Android 15（API 级别 35）为目标平台的应用会在画中画动画开始后立即观察到使用 isTransitioningToPip() 调用的 Activity#onPictureInPictureUiStateChanged 回调。在 PiP 模式下，许多界面元素与应用无关，例如包含建议、即将播放的视频、评分和标题等信息的视图或布局。当应用进入画中画模式时，请使用 onPictureInPictureUiStateChanged 回调隐藏这些界面元素。当应用从画中画窗口进入全屏模式时，请使用 onPictureInPictureModeChanged 回调取消隐藏这些元素，如以下示例所示：

override fun onPictureInPictureUiStateChanged(pipState: PictureInPictureUiState) {
        if (pipState.isTransitioningToPip()) {
          // Hide UI elements
        }
    }

override fun onPictureInPictureModeChanged(isInPictureInPictureMode: Boolean) {
        if (isInPictureInPictureMode) {
          // Unhide UI elements
        }
    }

不相关界面元素（适用于画中画窗口）的这种快速可见性切换有助于确保画中画进入动画更流畅、不闪烁。

改进了“勿扰”规则

AutomaticZenRule lets apps customize Attention Management (Do Not Disturb) rules and decide when to activate or deactivate them. Android 15 greatly enhances these rules with the goal of improving the user experience. The following enhancements are included:

  • Adding types to AutomaticZenRule, allowing the system to apply special treatment to some rules.
  • Adding an icon to AutomaticZenRule, helping to make the modes be more recognizable.
  • Adding a triggerDescription string to AutomaticZenRule that describes the conditions on which the rule should become active for the user.
  • Added ZenDeviceEffects to AutomaticZenRule, allowing rules to trigger things like grayscale display, night mode, or dimming the wallpaper.

为通知渠道设置 VibrationEffect

Android 15 supports setting rich vibrations for incoming notifications by channel using NotificationChannel.setVibrationEffect, so your users can distinguish between different types of notifications without having to look at their device.

媒体投影状态栏条状标签和自动停止

Media projection can expose private user information. A new, prominent status bar chip makes users aware of any ongoing screen projection. Users can tap the chip to stop screen casting, sharing, or recording. Also, for a more intuitive user experience, any in‑progress screen projection now automatically stops when the device screen is locked.

Status bar chip for screen sharing, casting, and recording.

大屏设备和外形规格

Android 15 为您的应用提供了支持，可充分利用 Android 的各种外形规格，包括大屏设备、翻盖设备和可折叠设备。

改进了大屏幕多任务处理

Android 15 gives users better ways to multitask on large screen devices. For example, users can save their favorite split-screen app combinations for quick access and pin the taskbar on screen to quickly switch between apps. This means that making sure your app is adaptive is more important than ever.

Google I/O has sessions on Building adaptive Android apps and Building UI with the Material 3 adaptive library that can help, and our documentation has more to help you Design for large screens.

支持封面屏幕

Your app can declare a property that Android 15 uses to allow your Application or Activity to be presented on the small cover screens of supported flippable devices. These screens are too small to be considered as compatible targets for Android apps to run on, but your app can opt in to supporting them, making your app available in more places.

连接

Android 15 更新了平台，让您的应用能够使用最新的通信和无线技术。

卫星支持

Android 15 继续扩大对卫星连接的平台支持，并包含一些界面元素，以确保在整个卫星连接环境中提供一致的用户体验。

应用可以使用 ServiceState.isUsingNonTerrestrialNetwork() 执行以下操作： 检测设备是否连接到卫星，让他们更清楚地了解 可能会导致完全网络服务不可用的原因此外，Android 15 支持短信和彩信应用以及预加载的 RCS 应用，以便使用卫星连接发送和接收消息。

当设备连接到卫星时，系统会显示通知。

更顺畅的 NFC 体验

Android 15 is working to make the tap to pay experience more seamless and reliable while continuing to support Android's robust NFC app ecosystem. On supported devices, apps can request the NfcAdapter to enter observe mode, where the device listens but doesn't respond to NFC readers, sending the app's NFC service PollingFrame objects to process. The PollingFrame objects can be used to auth ahead of the first communication to the NFC reader, allowing for a one tap transaction in many cases.

In addition, apps can register a filter on supported devices so they can be notified of polling loop activity, which allows for smooth operation with multiple NFC-aware applications.

钱包角色

Android 15 引入了钱包角色，可与用户的首选钱包应用更紧密地集成。此角色会取代 NFC 默认的感应式付款设置。用户可以前往设置 > 应用 > 默认应用，管理钱包角色持有者。

在为在付款类别中注册的 AID 路由 NFC 感应式付款时，系统会使用钱包角色。点按操作始终会转到 Google 钱包角色持有者，除非有已注册相同 AID 的其他应用在前台运行。

此角色还用于确定“Google 钱包”快速访问功能块在启用后应显示在何处。将角色设为“无”时，“快速访问”功能块不可用，并且支付类别 NFC 点按仅传送到前台应用。

安全

Android 15 可帮助您增强应用的安全性、保护应用的数据，并让用户更清楚地了解并更好地控制其数据。观看 Google I/O 大会上的保护 Android 用户安全演讲，详细了解我们为改进用户保护措施并保护您的应用免受新威胁而采取的措施。

将 Credential Manager 与自动填充功能集成

从 Android 15 开始，开发者可以将用户名或密码字段等特定视图与 Credential Manager 请求相关联，从而更轻松地在登录过程中提供量身定制的用户体验。当用户聚焦于其中一个视图时，系统会向 Credential Manager 发送相应请求。系统会汇总来自各个提供商的凭据，并在自动填充后备界面（例如内嵌建议或下拉菜单建议）中显示这些凭据。Jetpack androidx.credentials 库是开发者首选的端点，很快将在 Android 15 及更高版本中推出，以进一步增强此功能。

将一键注册和登录与生物识别提示集成

Credential Manager integrates biometric prompts into the credential creation and sign-in processes, eliminating the need for providers to manage biometric prompts. As a result, credential providers only need to focus on the results of the create and get flows, augmented with the biometric flow result. This simplified process creates a more efficient and streamlined credential creation and retrieval process.

端到端加密的密钥管理

我们将在 Android 15 中引入 E2eeContactKeysManager，它通过提供用于存储加密公钥的操作系统级 API，有助于在 Android 应用中实现端到端加密 (E2EE)。

E2eeContactKeysManager 旨在与平台通讯录应用集成，以便用户集中管理和验证通讯录联系人的公钥。

对内容 URI 的权限检查

Android 15 introduces a set of APIs that perform permission checks on content URIs:

无障碍

Android 15 添加了一些功能，可为用户改善无障碍体验。

改进盲文

在 Android 15 中，我们让 TalkBack 能够支持通过 USB 和安全蓝牙使用 HID 标准的盲文显示屏。

此标准与鼠标和键盘使用的标准非常相似，将有助于 Android 随着时间的推移支持更多类型的盲文显示屏。

国际化

Android 15 添加了一些功能，可在用户使用不同语言使用设备时提升用户体验。

CJK 可变字体

Starting with Android 15, the font file for Chinese, Japanese, and Korean (CJK) languages, NotoSansCJK, is now a variable font. Variable fonts open up possibilities for creative typography in CJK languages. Designers can explore a broader range of styles and create visually striking layouts that were previously difficult or impossible to achieve.

How the variable font for Chinese, Japanese, and Korean (CJK) languages appears with different font widths.

字符间两端对齐

Starting with Android 15, text can be justified utilizing letter spacing by using JUSTIFICATION_MODE_INTER_CHARACTER. Inter-word justification was first introduced in Android 8.0 (API level 26), and inter-character justification provides similar capabilities for languages that use the whitespace character for segmentation, such as Chinese, Japanese, and others.

Layout for Japanese text using JUSTIFICATION_MODE_NONE.
Layout for English text using JUSTIFICATION_MODE_NONE.


Layout for Japanese text using JUSTIFICATION_MODE_INTER_WORD.
Layout for English text using JUSTIFICATION_MODE_INTER_WORD.


Layout for Japanese text using the JUSTIFICATION_MODE_INTER_CHARACTER.
Layout for English text using the JUSTIFICATION_MODE_INTER_CHARACTER.

自动换行配置

Android started supporting phrase-based line breaks for Japanese and Korean in Android 13 (API level 33). However, while phrase-based line breaks improve the readability of short lines of text, they don't work well for long lines of text. In Android 15, apps can apply phrase-based line breaks only for short lines of text, using the LINE_BREAK_WORD_STYLE_AUTO option. This option selects the best word style option for the text.

For short lines of text, phrase-based line breaks are used, functioning the same as LINE_BREAK_WORD_STYLE_PHRASE, as shown in the following image:

For short lines of text, LINE_BREAK_WORD_STYLE_AUTO applies phrase-based line breaks to improve the readability of the text. This is the same as applying LINE_BREAK_WORD_STYLE_PHRASE.

For longer lines of text, LINE_BREAK_WORD_STYLE_AUTO uses a no line-break word style, functioning the same as LINE_BREAK_WORD_STYLE_NONE, as shown in the following image:

For long lines of text, LINE_BREAK_WORD_STYLE_AUTO applies no line-break word style to improve the readability of the text. This is the same as applying LINE_BREAK_WORD_STYLE_NONE.

额外的日语 hentaigana 字体

在 Android 15 中，旧版日语平假名（也称为 Hentaigana）字体文件 捆绑在一起半形人物的独特形状可以增加 风格或设计独特的风格 传播和理解古代日本文件的能力。

日文半角字符和文本样式 字体。

VideoLAN cone Copyright (c) 1996-2010 VideoLAN. This logo or a modified version may be used or modified by anyone to refer to the VideoLAN project or any product developed by the VideoLAN team, but does not indicate endorsement by the project.

Vulkan and the Vulkan logo are registered trademarks of the Khronos Group Inc.

OpenGL is a registered trademark and the OpenGL ES logo is a trademark of Hewlett Packard Enterprise used by permission by Khronos.