行为变更：以 Android 14 或更高版本为目标平台的应用

与以前的版本一样，Android 14 包含一些行为变更，这些变更可能会影响您的应用。以下行为变更仅影响以 Android 14（API 级别 34）或更高版本为目标平台的应用。如果您的应用以 Android 14 或更高版本为目标平台，您应该修改自己的应用以适当地支持这些行为（如果适用）。

此外，请务必查看对 Android 14 上运行的所有应用都有影响的行为变更列表（无论应用的 targetSdkVersion 如何）。

核心功能

前台服务类型是必需的

如果您的应用以 Android 14（API 级别 34）或更高版本为目标平台，则必须为应用中的每项前台服务指定至少一个前台服务类型。您应该选择一个能够代表应用用例的前台服务类型。系统需要特定类型的前台服务满足特定用例。

注意：Android 14 针对运行状况和远程消息传递用例引入了前台服务类型。系统还为简短服务、特殊用例和系统豁免保留新的类型。

如果应用中的用例与这些类型均不相关，强烈建议您迁移逻辑以使用 WorkManager 或用户发起的数据传输作业。

在 BluetoothAdapter 中强制执行 BLUETOOTH_CONNECT 权限

Android 14 enforces the BLUETOOTH_CONNECT permission when calling the BluetoothAdapter getProfileConnectionState() method for apps targeting Android 14 (API level 34) or higher.

This method already required the BLUETOOTH_CONNECT permission, but it was not enforced. Make sure your app declares BLUETOOTH_CONNECT in your app's AndroidManifest.xml file as shown in the following snippet and check that a user has granted the permission before calling getProfileConnectionState.

<uses-permission android:name="android.permission.BLUETOOTH_CONNECT" />

OpenJDK 17 更新

Android 14 continues the work of refreshing Android's core libraries to align with the features in the latest OpenJDK LTS releases, including both library updates and Java 17 language support for app and platform developers.

A few of these changes can affect app compatibility:

• Changes to regular expressions: Invalid group references are now disallowed to more closely follow the semantics of OpenJDK. You might see new cases where an IllegalArgumentException is thrown by the java.util.regex.Matcher class, so make sure to test your app for areas that use regular expressions. To enable or disable this change while testing, toggle the DISALLOW_INVALID_GROUP_REFERENCE flag using the compatibility framework tools.
• UUID handling: The java.util.UUID.fromString() method now does more strict checks when validating the input argument, so you might see an IllegalArgumentException during deserialization. To enable or disable this change while testing, toggle the ENABLE_STRICT_VALIDATION flag using the compatibility framework tools.
• ProGuard issues: In some cases, the addition of the java.lang.ClassValue class causes an issue if you try to shrink, obfuscate, and optimize your app using ProGuard. The problem originates with a Kotlin library that changes runtime behaviour based on whether Class.forName("java.lang.ClassValue") returns a class or not. If your app was developed against an older version of the runtime without the java.lang.ClassValue class available, then these optimizations might remove the computeValue method from classes derived from java.lang.ClassValue.

JobScheduler 增强回调和网络行为

自从引入后，JobScheduler 期望您的应用从 onStartJob 或 onStopJob。在 Android 14 之前，如果作业运行时间过长，系统会停止作业并静默失败。如果您的应用以 Android 14（API 级别 34）或更高版本为目标平台， 超过在主线程上授予的时间，应用会触发 ANR 显示“没有响应 onStartJob”错误消息或 “onStopJob没有回复”。

此 ANR 可能是由以下 2 种情况造成的： 1.有工作阻塞主线程，阻止回调 onStartJob 或者onStopJob在预期时间内执行并完成。 2. 开发者在 JobScheduler 中运行阻塞工作 回调 onStartJob 或 onStopJob，阻止从 在预期的时限内完成

要解决第 1 个问题，您需要进一步调试阻塞主线程的因素 您可以使用以下代码 ApplicationExitInfo#getTraceInputStream()，用于获取 Tombstone ANR 发生时的跟踪信息如果您能够手动重现 ANR 问题 您可以录制系统轨迹，并使用 Android Studio 或 Perfetto，以便更好地了解应用上运行的 在发生 ANR 时调用主线程 请注意，直接使用 JobScheduler API 或使用 androidx 库 WorkManager 时可能会发生这种情况。

如需解决问题 2，请考虑迁移到 WorkManager，它支持将 onStartJob 或 onStopJob 中的任何处理封装在异步线程中。

JobScheduler 还引入了一项要求，即如果使用 setRequiredNetworkType 或 setRequiredNetwork 约束条件，则必须声明 ACCESS_NETWORK_STATE 权限。如果您的应用未声明 ACCESS_NETWORK_STATE 权限 Android 14 或更高版本，则会导致 SecurityException。

Tiles 发布 API

对于以 Android 14 及更高版本为目标平台的应用， TileService#startActivityAndCollapse(Intent) 已弃用，现在会抛出 调用时抛出异常。如果您的应用从功能块启动 activity，请使用 TileService#startActivityAndCollapse(PendingIntent)。

隐私权

拥有对照片和视频的部分访问权限

Android 14 introduces Selected Photos Access, which allows users to grant apps access to specific images and videos in their library, rather than granting access to all media of a given type.

This change is only enabled if your app targets Android 14 (API level 34) or higher. If you don't use the photo picker yet, we recommend implementing it in your app to provide a consistent experience for selecting images and videos that also enhances user privacy without having to request any storage permissions.

If you maintain your own gallery picker using storage permissions and need to maintain full control over your implementation, adapt your implementation to use the new READ_MEDIA_VISUAL_USER_SELECTED permission. If your app doesn't use the new permission, the system runs your app in a compatibility mode.

用户体验

安全的全屏 intent 通知

在 Android 11（API 级别 30）中，任何应用都可以在手机处于锁定状态时使用 Notification.Builder.setFullScreenIntent 发送全屏 intent。您可以通过在 AndroidManifest 中声明 USE_FULL_SCREEN_INTENT 权限，在应用安装时自动授予此权限。

全屏 intent 通知适用于需要用户立即注意的极高优先级通知，例如用户来电或用户配置的闹钟设置。对于以 Android 14（API 级别 34）或更高版本为目标平台的应用，获准使用此权限的应用仅限于提供通话和闹钟的应用。对于不适合此资料的任何应用，Google Play 商店会撤消其默认的 USE_FULL_SCREEN_INTENT 权限。这些政策变更的截止日期为 2024 年 5 月 31 日。

在用户更新到 Android 14 之前，在手机上安装的应用仍拥有此权限。用户可以开启和关闭此权限。

您可以使用新 API NotificationManager.canUseFullScreenIntent 检查应用是否具有该权限；如果没有，应用可以使用新 intent ACTION_MANAGE_APP_USE_FULL_SCREEN_INTENT 启动设置页面，在该页面中，用户可以授予权限。

安全

对隐式 intent 和待处理 intent 的限制

For apps targeting Android 14 (API level 34) or higher, Android restricts apps from sending implicit intents to internal app components in the following ways:

• Implicit intents are only delivered to exported components. Apps must either use an explicit intent to deliver to unexported components, or mark the component as exported.
• If an app creates a mutable pending intent with an intent that doesn't specify a component or package, the system throws an exception.

These changes prevent malicious apps from intercepting implicit intents that are intended for use by an app's internal components.

For example, here is an intent filter that could be declared in your app's manifest file:

<activity
    android:name=".AppActivity"
    android:exported="false">
    <intent-filter>
        <action android:name="com.example.action.APP_ACTION" />
        <category android:name="android.intent.category.DEFAULT" />
    </intent-filter>
</activity>

If your app tried to launch this activity using an implicit intent, an ActivityNotFoundException exception would be thrown:

Kotlin

// Throws an ActivityNotFoundException exception when targeting Android 14.
context.startActivity(Intent("com.example.action.APP_ACTION"))

Java

// Throws an ActivityNotFoundException exception when targeting Android 14.
context.startActivity(new Intent("com.example.action.APP_ACTION"));

To launch the non-exported activity, your app should use an explicit intent instead:

Kotlin

// This makes the intent explicit.
val explicitIntent =
        Intent("com.example.action.APP_ACTION")
explicitIntent.apply {
    package = context.packageName
}
context.startActivity(explicitIntent)

Java

// This makes the intent explicit.
Intent explicitIntent =
        new Intent("com.example.action.APP_ACTION")
explicitIntent.setPackage(context.getPackageName());
context.startActivity(explicitIntent);

在运行时注册的广播接收器必须指定导出行为

以 Android 14（API 级别 34）或更高版本为目标平台并使用上下文注册的接收器的应用和服务必须指定一个标志，以指明接收器是否应导出到设备上的所有其他应用：分别为 RECEIVER_EXPORTED 或 RECEIVER_NOT_EXPORTED。此要求有助于利用 Android 13 中引入的这些接收器的功能，保护应用免受安全漏洞的影响。

仅接收系统广播的接收器的例外情况

如果您的应用仅通过 Context#registerReceiver 方法（例如 Context#registerReceiver()）为系统广播注册接收器，那么在注册接收器时不应指定标志。

更安全的动态代码加载

If your app targets Android 14 (API level 34) or higher and uses Dynamic Code Loading (DCL), all dynamically-loaded files must be marked as read-only. Otherwise, the system throws an exception. We recommend that apps avoid dynamically loading code whenever possible, as doing so greatly increases the risk that an app can be compromised by code injection or code tampering.

If you must dynamically load code, use the following approach to set the dynamically-loaded file (such as a DEX, JAR, or APK file) as read-only as soon as the file is opened and before any content is written:

Kotlin

val jar = File("DYNAMICALLY_LOADED_FILE.jar")
val os = FileOutputStream(jar)
os.use {
    // Set the file to read-only first to prevent race conditions
    jar.setReadOnly()
    // Then write the actual file content
}
val cl = PathClassLoader(jar, parentClassLoader)

Java

File jar = new File("DYNAMICALLY_LOADED_FILE.jar");
try (FileOutputStream os = new FileOutputStream(jar)) {
    // Set the file to read-only first to prevent race conditions
    jar.setReadOnly();
    // Then write the actual file content
} catch (IOException e) { ... }
PathClassLoader cl = new PathClassLoader(jar, parentClassLoader);

Handle dynamically-loaded files that already exist

To prevent exceptions from being thrown for existing dynamically-loaded files, we recommend deleting and recreating the files before you try to dynamically load them again in your app. As you recreate the files, follow the preceding guidance for marking the files read-only at write time. Alternatively, you can re-label the existing files as read-only, but in this case, we strongly recommend that you verify the integrity of the files first (for example, by checking the file's signature against a trusted value), to help protect your app from malicious actions.

针对从后台启动 activity 的其他限制

对于以 Android 14（API 级别 34）或更高版本为目标平台的应用，系统会进一步限制允许应用在后台启动 activity 的时间：

• 现在，当应用使用 PendingIntent#send() 或类似方法发送 PendingIntent 时，如果它想要授予自己的后台 activity 启动待处理 intent 的启动特权，则必须选择启用。如需选择启用，应用应通过 setPendingIntentBackgroundActivityStartMode(MODE_BACKGROUND_ACTIVITY_START_ALLOWED) 传递 ActivityOptions 软件包。
• 当可见应用绑定了另一个后台应用的服务时 bindService() 方法，可见应用现在必须 如果它想要将自己的后台活动 绑定服务。要选择启用，应用应包含 BIND_ALLOW_ACTIVITY_STARTS 标志，在调用 bindService() 方法。

这些更改扩大了一组现有限制条件的范围，目的是防止恶意应用滥用 API 以在后台启动干扰性活动，从而保护用户。

压缩路径遍历

对于以 Android 14（API 级别 34）或更高版本为目标平台的应用，Android 会通过以下方式防止 Zip 路径遍历漏洞：如果 zip 文件条目名称包含“..”或以“/”开头，则 ZipInputStream.getNextEntry() 会抛出 ZipException。ZipFile(String)

应用可以通过调用 dalvik.system.ZipPathValidator.clearCallback() 选择停用此验证。

每个 MediaProjection 拍摄会话都需要征得用户同意

For apps targeting Android 14 (API level 34) or higher, a SecurityException is thrown by MediaProjection#createVirtualDisplay in either of the following scenarios:

• Your app caches the Intent that is returned from MediaProjectionManager#createScreenCaptureIntent, and passes it multiple times to MediaProjectionManager#getMediaProjection.
• Your app invokes MediaProjection#createVirtualDisplay multiple times on the same MediaProjection instance.

Your app must ask the user to give consent before each capture session. A single capture session is a single invocation on MediaProjection#createVirtualDisplay, and each MediaProjection instance must be used only once.

Handle configuration changes

If your app needs to invoke MediaProjection#createVirtualDisplay to handle configuration changes (such as the screen orientation or screen size changing), you can follow these steps to update the VirtualDisplay for the existing MediaProjection instance:

1. Invoke VirtualDisplay#resize with the new width and height.
2. Provide a new Surface with the new width and height to VirtualDisplay#setSurface.

Register a callback

Your app should register a callback to handle cases where the user doesn't grant consent to continue a capture session. To do this, implement Callback#onStop and have your app release any related resources (such as the VirtualDisplay and Surface).

If your app doesn't register this callback, MediaProjection#createVirtualDisplay throws an IllegalStateException when your app invokes it.

更新后的非 SDK 限制

Android 14 包含更新后的受限非 SDK 接口列表（基于与 Android 开发者之间的协作以及最新的内部测试）。在限制使用非 SDK 接口之前，我们会尽可能确保有可用的公开替代方案。

如果您的应用并非以 Android 14 为目标平台，其中一些变更可能不会立即对您产生影响。然而，虽然您目前仍可以使用一些非 SDK 接口（具体取决于应用的目标 API 级别），但只要您使用任何非 SDK 方法或字段，终归存在导致应用出问题的显著风险。

如果您不确定自己的应用是否使用了非 SDK 接口，则可以测试您的应用来进行确认。如果您的应用依赖于非 SDK 接口，您应该开始计划迁移到 SDK 替代方案。然而，我们知道某些应用具有使用非 SDK 接口的有效用例。如果您无法为应用中的某项功能找到使用非 SDK 接口的替代方案，应请求新的公共 API。

如需详细了解此 Android 版本中的变更，请参阅 Android 14 中有关限制非 SDK 接口的更新。如需全面了解有关非 SDK 接口的详细信息，请参阅对非 SDK 接口的限制。