行为变更：以 Android 14 或更高版本为目标平台的应用

与之前的版本一样，Android 14 包含一些行为变更，这些变更可能会影响您的应用。以下行为变更仅影响以 Android 14（API 级别 34）或更高版本为目标平台的应用。如果您的应用以 Android 14 或更高版本为目标平台，您应该修改自己的应用以适当地支持这些行为（如果适用）。

请务必查看对 Android 14 上运行的所有应用都有影响的行为变更列表（无论应用的 targetSdkVersion 如何）。

核心功能

前台服务类型是必填项

If your app targets Android 14 (API level 34) or higher, it must specify at least one foreground service type for each foreground service within your app. You should choose a foreground service type that represents your app's use case. The system expects foreground services that have a particular type to satisfy a particular use case.

Note: Android 14 introduces foreground service types for health and remote messaging use cases. The system also reserves new types for short services, special use cases, and system exemptions.

If a use case in your app isn't associated with any of these types, it's strongly recommended that you migrate your logic to use WorkManager or user-initiated data transfer jobs.

在 BluetoothAdapter 中强制执行 BLUETOOTH_CONNECT 权限

Android 14 enforces the BLUETOOTH_CONNECT permission when calling the BluetoothAdapter getProfileConnectionState() method for apps targeting Android 14 (API level 34) or higher.

This method already required the BLUETOOTH_CONNECT permission, but it was not enforced. Make sure your app declares BLUETOOTH_CONNECT in your app's AndroidManifest.xml file as shown in the following snippet and check that a user has granted the permission before calling getProfileConnectionState.

<uses-permission android:name="android.permission.BLUETOOTH_CONNECT" />

OpenJDK 17 更新

Android 14 将继续更新 Android 的核心库，以与最新 OpenJDK LTS 版本中的功能保持一致，包括适合应用和平台开发者的库更新和 Java 17 语言支持。

以下变更可能会影响应用兼容性：

• 对正则表达式的更改：现在，为了更严格地遵循 OpenJDK 的语义，不允许无效的组引用。您可能会看到 java.util.regex.Matcher 类抛出 IllegalArgumentException 的新情况，因此请务必测试应用中使用正则表达式的情形。如需在测试期间启用或停用此变更，请使用兼容性框架工具切换 DISALLOW_INVALID_GROUP_REFERENCE 标志。
• UUID 处理：现在，验证输入参数时，java.util.UUID.fromString() 方法会执行更严格的检查，因此您可能会在反序列化期间看到 IllegalArgumentException。如需在测试期间启用或停用此变更，请使用兼容性框架工具切换 ENABLE_STRICT_VALIDATION 标志。
• ProGuard 问题：有时，在您尝试使用 ProGuard 缩减、混淆和优化应用时，添加 java.lang.ClassValue 类会导致问题。问题源自 Kotlin 库，该库会根据 Class.forName("java.lang.ClassValue") 是否会返回类更改运行时行为。如果您的应用是根据没有 java.lang.ClassValue 类的旧版运行时开发的，则这些优化可能会将 computeValue 方法从派生自 java.lang.ClassValue 的类中移除。

JobScheduler 强化了回调和网络行为

自从引入后，JobScheduler 期望您的应用从 onStartJob 或 onStopJob。在 Android 14 之前，如果作业运行时间过长，系统会停止作业并静默失败。如果您的应用以 Android 14（API 级别 34）或更高版本为目标平台， 超过在主线程上授予的时间，应用会触发 ANR 显示“没有响应 onStartJob”错误消息或 “onStopJob没有回复”。

此 ANR 可能是由以下 2 种情况造成的： 1.有工作阻塞主线程，阻止回调 onStartJob 或者onStopJob在预期时间内执行并完成。 2. 开发者在 JobScheduler 中运行阻塞工作 回调 onStartJob 或 onStopJob，阻止从 在预期的时限内完成

要解决第 1 个问题，您需要进一步调试阻塞主线程的因素 您可以使用以下代码 ApplicationExitInfo#getTraceInputStream()，用于获取 Tombstone ANR 发生时的跟踪信息如果您能够手动重现 ANR 问题 您可以录制系统轨迹，并使用 Android Studio 或 Perfetto，以便更好地了解应用上运行的 在发生 ANR 时调用主线程 请注意，直接使用 JobScheduler API 或使用 androidx 库 WorkManager 时可能会发生这种情况。

如需解决问题 2，请考虑迁移到 WorkManager，它支持将 onStartJob 或 onStopJob 中的任何处理封装在异步线程中。

JobScheduler 还引入了一项要求，即如果使用 setRequiredNetworkType 或 setRequiredNetwork 约束条件，则必须声明 ACCESS_NETWORK_STATE 权限。如果您的应用未声明 ACCESS_NETWORK_STATE 权限 Android 14 或更高版本，则会导致 SecurityException。

功能块启动 API

对于以 Android 14 及更高版本为目标平台的应用， TileService#startActivityAndCollapse(Intent) 已弃用，现在会抛出 调用时抛出异常。如果您的应用从功能块启动 activity，请使用 TileService#startActivityAndCollapse(PendingIntent)。

隐私设置

对照片和视频的部分访问权限

Android 14 introduces Selected Photos Access, which allows users to grant apps access to specific images and videos in their library, rather than granting access to all media of a given type.

This change is only enabled if your app targets Android 14 (API level 34) or higher. If you don't use the photo picker yet, we recommend implementing it in your app to provide a consistent experience for selecting images and videos that also enhances user privacy without having to request any storage permissions.

If you maintain your own gallery picker using storage permissions and need to maintain full control over your implementation, adapt your implementation to use the new READ_MEDIA_VISUAL_USER_SELECTED permission. If your app doesn't use the new permission, the system runs your app in a compatibility mode.

用户体验

安全的全屏 intent 通知

在 Android 11（API 级别 30）中，任何应用都可以在手机处于锁定状态时使用 Notification.Builder.setFullScreenIntent 发送全屏 intent。您可以通过在 AndroidManifest 中声明 USE_FULL_SCREEN_INTENT 权限，在应用安装时自动授予此权限。

全屏 intent 通知适用于需要用户立即注意的极高优先级通知，例如用户来电或用户配置的闹钟设置。对于以 Android 14（API 级别 34）或更高版本为目标平台的应用，获准使用此权限的应用仅限于提供通话和闹钟的应用。对于不适合此情况的任何应用，Google Play 商店会撤消其默认的 USE_FULL_SCREEN_INTENT 权限。这些政策变更的截止日期为 2024 年 5 月 31 日。

在用户更新到 Android 14 之前，在手机上安装的应用仍拥有此权限。用户可以开启和关闭此权限。

您可以使用新 API NotificationManager.canUseFullScreenIntent 检查应用是否具有该权限；如果没有，应用可以使用新 intent ACTION_MANAGE_APP_USE_FULL_SCREEN_INTENT 启动设置页面，在该页面中，用户可以授予权限。

安全

对隐式 intent 和待处理 intent 的限制

对于以 Android 14（API 级别 34）或更高版本为目标平台的应用，Android 会通过以下方式限制应用向内部应用组件发送隐式 intent：

• 隐式 intent 只能传送到导出的组件。应用必须使用显式 intent 传送到未导出的组件，或将该组件标记为已导出。
• 如果应用通过未指定组件或软件包的 intent 创建可变待处理 intent，系统会抛出异常。

这些变更可防止恶意应用拦截意在供应用内部组件使用的隐式 intent。

例如，下面是可以在应用的清单文件中声明的 intent 过滤器：

<activity
    android:name=".AppActivity"
    android:exported="false">
    <intent-filter>
        <action android:name="com.example.action.APP_ACTION" />
        <category android:name="android.intent.category.DEFAULT" />
    </intent-filter>
</activity>

如果应用尝试使用隐式 intent 启动此 activity，则系统会抛出 ActivityNotFoundException 异常：

Kotlin

// Throws an ActivityNotFoundException exception when targeting Android 14.
context.startActivity(Intent("com.example.action.APP_ACTION"))

Java

// Throws an ActivityNotFoundException exception when targeting Android 14.
context.startActivity(new Intent("com.example.action.APP_ACTION"));

如需启动非导出的 activity，应用应改用显式 intent：

Kotlin

// This makes the intent explicit.
val explicitIntent =
        Intent("com.example.action.APP_ACTION")
explicitIntent.apply {
    package = context.packageName
}
context.startActivity(explicitIntent)

Java

// This makes the intent explicit.
Intent explicitIntent =
        new Intent("com.example.action.APP_ACTION")
explicitIntent.setPackage(context.getPackageName());
context.startActivity(explicitIntent);

在运行时注册的广播接收器必须指定导出行为

Apps and services that target Android 14 (API level 34) or higher and use context-registered receivers are required to specify a flag to indicate whether or not the receiver should be exported to all other apps on the device: either RECEIVER_EXPORTED or RECEIVER_NOT_EXPORTED, respectively. This requirement helps protect apps from security vulnerabilities by leveraging the features for these receivers introduced in Android 13.

Exception for receivers that receive only system broadcasts

If your app is registering a receiver only for system broadcasts through Context#registerReceiver methods, such as Context#registerReceiver(), then it shouldn't specify a flag when registering the receiver.

更安全的动态代码加载

If your app targets Android 14 (API level 34) or higher and uses Dynamic Code Loading (DCL), all dynamically-loaded files must be marked as read-only. Otherwise, the system throws an exception. We recommend that apps avoid dynamically loading code whenever possible, as doing so greatly increases the risk that an app can be compromised by code injection or code tampering.

If you must dynamically load code, use the following approach to set the dynamically-loaded file (such as a DEX, JAR, or APK file) as read-only as soon as the file is opened and before any content is written:

Kotlin

val jar = File("DYNAMICALLY_LOADED_FILE.jar")
val os = FileOutputStream(jar)
os.use {
    // Set the file to read-only first to prevent race conditions
    jar.setReadOnly()
    // Then write the actual file content
}
val cl = PathClassLoader(jar, parentClassLoader)

Java

File jar = new File("DYNAMICALLY_LOADED_FILE.jar");
try (FileOutputStream os = new FileOutputStream(jar)) {
    // Set the file to read-only first to prevent race conditions
    jar.setReadOnly();
    // Then write the actual file content
} catch (IOException e) { ... }
PathClassLoader cl = new PathClassLoader(jar, parentClassLoader);

Handle dynamically-loaded files that already exist

To prevent exceptions from being thrown for existing dynamically-loaded files, we recommend deleting and recreating the files before you try to dynamically load them again in your app. As you recreate the files, follow the preceding guidance for marking the files read-only at write time. Alternatively, you can re-label the existing files as read-only, but in this case, we strongly recommend that you verify the integrity of the files first (for example, by checking the file's signature against a trusted value), to help protect your app from malicious actions.

针对从后台启动 activity 的其他限制

对于以 Android 14（API 级别 34）或更高版本为目标平台的应用，系统会进一步限制允许应用在后台启动 activity 的时间：

• 现在，当应用使用 PendingIntent#send() 或类似方法发送 PendingIntent 时，如果它想要授予自己的后台 activity 启动待处理 intent 的启动特权，则必须选择启用。如需选择启用，应用应通过 setPendingIntentBackgroundActivityStartMode(MODE_BACKGROUND_ACTIVITY_START_ALLOWED) 传递 ActivityOptions 软件包。
• 当可见应用使用 bindService() 方法绑定其他在后台应用的服务时，如果可见应用想要授予自己的后台 activity 对绑定服务的启动特权，则必须选择启用。如需选择启用，应用应在调用 bindService() 方法时包含 BIND_ALLOW_ACTIVITY_STARTS 标志。

这些更改扩大了一组现有限制条件的范围，目的是防止恶意应用滥用 API 以在后台启动干扰性活动，从而保护用户。

压缩路径遍历

对于以 Android 14（API 级别 34）或更高版本为目标平台的应用，Android 会通过以下方式防止 Zip 路径遍历漏洞：如果 Zip 文件条目名称包含“..”或以“/”开头，ZipFile(String) 和 ZipInputStream.getNextEntry() 会抛出 ZipException。

应用可以通过调用 dalvik.system.ZipPathValidator.clearCallback() 选择停用此验证。

每次 MediaProjection 捕获会话都需要征得用户同意

For apps targeting Android 14 (API level 34) or higher, a SecurityException is thrown by MediaProjection#createVirtualDisplay in either of the following scenarios:

• Your app caches the Intent that is returned from MediaProjectionManager#createScreenCaptureIntent, and passes it multiple times to MediaProjectionManager#getMediaProjection.
• Your app invokes MediaProjection#createVirtualDisplay multiple times on the same MediaProjection instance.

Your app must ask the user to give consent before each capture session. A single capture session is a single invocation on MediaProjection#createVirtualDisplay, and each MediaProjection instance must be used only once.

Handle configuration changes

If your app needs to invoke MediaProjection#createVirtualDisplay to handle configuration changes (such as the screen orientation or screen size changing), you can follow these steps to update the VirtualDisplay for the existing MediaProjection instance:

1. Invoke VirtualDisplay#resize with the new width and height.
2. Provide a new Surface with the new width and height to VirtualDisplay#setSurface.

Register a callback

Your app should register a callback to handle cases where the user doesn't grant consent to continue a capture session. To do this, implement Callback#onStop and have your app release any related resources (such as the VirtualDisplay and Surface).

If your app doesn't register this callback, MediaProjection#createVirtualDisplay throws an IllegalStateException when your app invokes it.

更新后的非 SDK 限制

Android 14 includes updated lists of restricted non-SDK interfaces based on collaboration with Android developers and the latest internal testing. Whenever possible, we make sure that public alternatives are available before we restrict non-SDK interfaces.

If your app does not target Android 14, some of these changes might not immediately affect you. However, while you can currently use some non-SDK interfaces (depending on your app's target API level), using any non-SDK method or field always carries a high risk of breaking your app.

If you are unsure if your app uses non-SDK interfaces, you can test your app to find out. If your app relies on non-SDK interfaces, you should begin planning a migration to SDK alternatives. Nevertheless, we understand that some apps have valid use cases for using non-SDK interfaces. If you cannot find an alternative to using a non-SDK interface for a feature in your app, you should request a new public API.

如需详细了解此 Android 版本中的变更，请参阅 Android 14 中有关限制非 SDK 接口的更新。如需全面了解有关非 SDK 接口的详细信息，请参阅对非 SDK 接口的限制。