行为变更：以 Android 14 或更高版本为目标平台的应用

与以前的版本一样，Android 14 包含一些行为变更，这些变更可能会影响您的应用。以下行为变更仅影响以 Android 14（API 级别 34）或更高版本为目标平台的应用。如果您的应用以 Android 14 或更高版本为目标平台，您应该修改自己的应用以适当地支持这些行为（如果适用）。

此外，请务必查看对 Android 14 上运行的所有应用都有影响的行为变更列表（无论应用的 targetSdkVersion 如何）。

核心功能

前台服务类型是必需的

如果您的应用以 Android 14（API 级别 34）或更高版本为目标平台，则必须为应用中的每项前台服务指定至少一个前台服务类型。您应该选择一个能够代表应用用例的前台服务类型。系统需要特定类型的前台服务满足特定用例。

注意：Android 14 针对运行状况和远程消息传递用例引入了前台服务类型。系统还为简短服务、特殊用例和系统豁免保留新的类型。

如果应用中的用例与这些类型均不相关，强烈建议您迁移逻辑以使用 WorkManager 或用户发起的数据传输作业。

在 BluetoothAdapter 中强制执行 BLUETOOTH_CONNECT 权限

对于以 Android 14（API 级别 34）或更高版本为目标平台的应用，Android 14 会在调用 BluetoothAdapter getProfileConnectionState() 方法时强制执行 BLUETOOTH_CONNECT 权限。

此方法已需要 BLUETOOTH_CONNECT 权限，但未被强制执行。请确保您的应用在应用的 AndroidManifest.xml 文件中声明 BLUETOOTH_CONNECT（如以下代码段所示），并在调用 getProfileConnectionState 之前检查用户是否已授予权限。

<uses-permission android:name="android.permission.BLUETOOTH_CONNECT" />

OpenJDK 17 更新

Android 14 将继续更新 Android 的核心库，以与最新 OpenJDK LTS 版本中的功能保持一致，包括适合应用和平台开发者的库更新和 Java 17 语言支持。

以下变更可能会影响应用兼容性：

• 对正则表达式的更改：现在，为了更严格地遵循 OpenJDK 的语义，不允许无效的组引用。您可能会看到 java.util.regex.Matcher 类抛出 IllegalArgumentException 的新情况，因此请务必测试应用中使用正则表达式的情形。如需在测试期间启用或停用此变更，请使用兼容性框架工具切换 DISALLOW_INVALID_GROUP_REFERENCE 标志。
• UUID 处理：现在，验证输入参数时，java.util.UUID.fromString() 方法会执行更严格的检查，因此您可能会在反序列化期间看到 IllegalArgumentException。如需在测试期间启用或停用此变更，请使用兼容性框架工具切换 ENABLE_STRICT_VALIDATION 标志。
• ProGuard 问题：有时，在您尝试使用 ProGuard 缩减、混淆和优化应用时，添加 java.lang.ClassValue 类会导致问题。问题源自 Kotlin 库，该库会根据 Class.forName("java.lang.ClassValue") 是否会返回类更改运行时行为。如果您的应用是根据没有 java.lang.ClassValue 类的旧版运行时开发的，则这些优化可能会将 computeValue 方法从派生自 java.lang.ClassValue 的类中移除。

JobScheduler 增强回调和网络行为

Since its introduction, JobScheduler expects your app to return from onStartJob or onStopJob within a few seconds. Prior to Android 14, if a job runs too long, it stops and fails silently. If your app targets Android 14 (API level 34) or higher and exceeds the granted time on the main thread, the app triggers an ANR with the error message "No response to onStartJob" or "No response to onStopJob". Consider migrating to WorkManager, which provides support for asynchronous processing or migrating any heavy work into a background thread.

JobScheduler also introduces a requirement to declare the ACCESS_NETWORK_STATE permission if using setRequiredNetworkType or setRequiredNetwork constraint. If your app does not declare the ACCESS_NETWORK_STATE permission when scheduling the job and is targeting Android 14 or higher, it will result in a SecurityException.

Tiles 发布 API

对于以 14 及更高版本为目标平台的应用，TileService#startActivityAndCollapse(Intent) 已废弃，现在会在调用时抛出异常。如果您的应用从功能块启动 activity，请改用 TileService#startActivityAndCollapse(PendingIntent)。

隐私权

拥有对照片和视频的部分访问权限

Android 14 引入了所选照片访问权限，可让用户授权应用访问其媒体库中的特定图片和视频，而不是授予对指定类型的所有媒体的访问权限。

仅当您的应用以 Android 14（API 级别 34）或更高版本为目标平台时，才会启用此变更。如果您还没有使用照片选择器，建议您在应用中实现该选择器，以便在选择图片和视频时提供一致的体验，同时还可以加强用户隐私保护，而无需请求任何存储权限。

如果您使用存储权限维护自己的图库选择器，并且需要完全控制您的实现，请调整您的实现，以使用新的 READ_MEDIA_VISUAL_USER_SELECTED 权限。如果您的应用不使用新权限，系统会在兼容模式下运行应用。

用户体验

安全的全屏 intent 通知

With Android 11 (API level 30), it was possible for any app to use Notification.Builder.setFullScreenIntent to send full-screen intents while the phone is locked. You could auto-grant this on app install by declaring USE_FULL_SCREEN_INTENT permission in the AndroidManifest.

Full-screen intent notifications are designed for extremely high-priority notifications demanding the user's immediate attention, such as an incoming phone call or alarm clock settings configured by the user. For apps targeting Android 14 (API level 34) or higher, apps that are allowed to use this permission are limited to those that provide calling and alarms only. The Google Play Store revokes default USE_FULL_SCREEN_INTENT permissions for any apps that don't fit this profile. The deadline for these policy changes is May 31, 2024.

This permission remains enabled for apps installed on the phone before the user updates to Android 14. Users can turn this permission on and off.

You can use the new API NotificationManager.canUseFullScreenIntent to check if your app has the permission; if not, your app can use the new intent ACTION_MANAGE_APP_USE_FULL_SCREEN_INTENT to launch the settings page where users can grant the permission.

安全

对隐式 intent 和待处理 intent 的限制

For apps targeting Android 14 (API level 34) or higher, Android restricts apps from sending implicit intents to internal app components in the following ways:

• Implicit intents are only delivered to exported components. Apps must either use an explicit intent to deliver to unexported components, or mark the component as exported.
• If an app creates a mutable pending intent with an intent that doesn't specify a component or package, the system throws an exception.

These changes prevent malicious apps from intercepting implicit intents that are intended for use by an app's internal components.

For example, here is an intent filter that could be declared in your app's manifest file:

<activity
    android:name=".AppActivity"
    android:exported="false">
    <intent-filter>
        <action android:name="com.example.action.APP_ACTION" />
        <category android:name="android.intent.category.DEFAULT" />
    </intent-filter>
</activity>

If your app tried to launch this activity using an implicit intent, an exception would be thrown:

Kotlin

// Throws an exception when targeting Android 14.
context.startActivity(Intent("com.example.action.APP_ACTION"))

Java

// Throws an exception when targeting Android 14.
context.startActivity(new Intent("com.example.action.APP_ACTION"));

To launch the non-exported activity, your app should use an explicit intent instead:

Kotlin

// This makes the intent explicit.
val explicitIntent =
        Intent("com.example.action.APP_ACTION")
explicitIntent.apply {
    package = context.packageName
}
context.startActivity(explicitIntent)

Java

// This makes the intent explicit.
Intent explicitIntent =
        new Intent("com.example.action.APP_ACTION")
explicitIntent.setPackage(context.getPackageName());
context.startActivity(explicitIntent);

在运行时注册的广播接收器必须指定导出行为

以 Android 14（API 级别 34）或更高版本为目标平台并使用上下文注册的接收器的应用和服务必须指定一个标志，以指明接收器是否应导出到设备上的所有其他应用：分别为 RECEIVER_EXPORTED 或 RECEIVER_NOT_EXPORTED。此要求有助于利用 Android 13 中引入的这些接收器的功能，保护应用免受安全漏洞的影响。

仅接收系统广播的接收器的例外情况

如果您的应用仅通过 Context#registerReceiver 方法（例如 Context#registerReceiver()）为系统广播注册接收器，那么在注册接收器时不应指定标志。

更安全的动态代码加载

If your app targets Android 14 (API level 34) or higher and uses Dynamic Code Loading (DCL), all dynamically-loaded files must be marked as read-only. Otherwise, the system throws an exception. We recommend that apps avoid dynamically loading code whenever possible, as doing so greatly increases the risk that an app can be compromised by code injection or code tampering.

If you must dynamically load code, use the following approach to set the dynamically-loaded file (such as a DEX, JAR, or APK file) as read-only as soon as the file is opened and before any content is written:

Kotlin

val jar = File("DYNAMICALLY_LOADED_FILE.jar")
val os = FileOutputStream(jar)
os.use {
    // Set the file to read-only first to prevent race conditions
    jar.setReadOnly()
    // Then write the actual file content
}
val cl = PathClassLoader(jar, parentClassLoader)

Java

File jar = new File("DYNAMICALLY_LOADED_FILE.jar");
try (FileOutputStream os = new FileOutputStream(jar)) {
    // Set the file to read-only first to prevent race conditions
    jar.setReadOnly();
    // Then write the actual file content
} catch (IOException e) { ... }
PathClassLoader cl = new PathClassLoader(jar, parentClassLoader);

Handle dynamically-loaded files that already exist

To prevent exceptions from being thrown for existing dynamically-loaded files, we recommend deleting and recreating the files before you try to dynamically load them again in your app. As you recreate the files, follow the preceding guidance for marking the files read-only at write time. Alternatively, you can re-label the existing files as read-only, but in this case, we strongly recommend that you verify the integrity of the files first (for example, by checking the file's signature against a trusted value), to help protect your app from malicious actions.

针对从后台启动 activity 的其他限制

For apps targeting Android 14 (API level 34) or higher, the system further restricts when apps are allowed to start activities from the background:

• When an app sends a PendingIntent using PendingIntent#send() or similar methods, the app must opt in if it wants to grant its own background activity launch privileges to start the pending intent. To opt in, the app should pass an ActivityOptions bundle with setPendingIntentBackgroundActivityStartMode(MODE_BACKGROUND_ACTIVITY_START_ALLOWED).
• When a visible app binds a service of another app that's in the background using the bindService() method, the visible app must now opt in if it wants to grant its own background activity launch privileges to the bound service. To opt in, the app should include the BIND_ALLOW_ACTIVITY_STARTS flag when calling the bindService() method.

These changes expand the existing set of restrictions to protect users by preventing malicious apps from abusing APIs to start disruptive activities from the background.

压缩路径遍历

对于以 Android 14（API 级别 34）或更高版本为目标平台的应用，Android 会通过以下方式防止 Zip 路径遍历漏洞：如果 zip 文件条目名称包含“..”或以“/”开头，则 ZipInputStream.getNextEntry() 会抛出 ZipException。ZipFile(String)

应用可以通过调用 dalvik.system.ZipPathValidator.clearCallback() 选择停用此验证。

每个 MediaProjection 拍摄会话都需要征得用户同意

对于以 Android 14（API 级别 34）或更高版本为目标平台的应用，在以下任一情况下，MediaProjection#createVirtualDisplay 会抛出 SecurityException：

• 您的应用会缓存从 MediaProjectionManager#createScreenCaptureIntent 返回的 Intent，并将其多次传递给 MediaProjectionManager#getMediaProjection。
• 您的应用在同一 MediaProjection 实例上多次调用 MediaProjection#createVirtualDisplay。

您的应用必须在每次捕获会话之前征求用户同意。单次拍摄会话是指对 MediaProjection#createVirtualDisplay 的单次调用，且每个 MediaProjection 实例只能使用一次。

处理配置变更

如果您的应用需要调用 MediaProjection#createVirtualDisplay 来处理配置更改（例如屏幕方向或屏幕尺寸更改），您可以按照以下步骤更新现有 MediaProjection 实例的 VirtualDisplay：

1. 使用新的宽度和高度调用 VirtualDisplay#resize。
2. 为 VirtualDisplay#setSurface 提供具有新宽度和高度的新 Surface。

注册回调

您的应用应注册一个回调，以处理用户不同意继续拍摄会话的情况。为此，请实现 Callback#onStop 并让您的应用发布所有相关资源（例如 VirtualDisplay 和 Surface）。

如果您的应用未注册此回调，MediaProjection#createVirtualDisplay 会在应用调用此回调时抛出 IllegalStateException。

更新后的非 SDK 限制

Android 14 includes updated lists of restricted non-SDK interfaces based on collaboration with Android developers and the latest internal testing. Whenever possible, we make sure that public alternatives are available before we restrict non-SDK interfaces.

If your app does not target Android 14, some of these changes might not immediately affect you. However, while you can currently use some non-SDK interfaces (depending on your app's target API level), using any non-SDK method or field always carries a high risk of breaking your app.

If you are unsure if your app uses non-SDK interfaces, you can test your app to find out. If your app relies on non-SDK interfaces, you should begin planning a migration to SDK alternatives. Nevertheless, we understand that some apps have valid use cases for using non-SDK interfaces. If you cannot find an alternative to using a non-SDK interface for a feature in your app, you should request a new public API.

如需详细了解此 Android 版本中的变更，请参阅 Android 14 中有关限制非 SDK 接口的更新。如需全面了解有关非 SDK 接口的详细信息，请参阅对非 SDK 接口的限制。