Podobnie jak w przypadku poprzednich wersji Androida, w Androidzie 14 wprowadzono zmiany w działaniu, które mogą mieć wpływ na Twoją aplikację. Poniższe zmiany w działaniu dotyczą wyłącznie aplikacji kierowanych na Androida 14 (API na poziomie 34) lub nowszego. Jeśli Twoja aplikacja jest kierowana na Androida 14 lub nowszego, zmodyfikuj ją, aby prawidłowo obsługiwała te zachowania, w stosownych przypadkach.
Zapoznaj się też z listą zmian w zachowaniu, które wpływają na wszystkie aplikacje działające na Androidzie 14, niezależnie od targetSdkVersion
aplikacji.
Główna funkcja
Typy usług na pierwszym planie są wymagane
If your app targets Android 14 (API level 34) or higher, it must specify at least one foreground service type for each foreground service within your app. You should choose a foreground service type that represents your app's use case. The system expects foreground services that have a particular type to satisfy a particular use case.
If a use case in your app isn't associated with any of these types, it's strongly recommended that you migrate your logic to use WorkManager or user-initiated data transfer jobs.
Wymuszanie uprawnień BLUETOOTH_CONNECT w BluetoothAdapter
Android 14 enforces the BLUETOOTH_CONNECT
permission when calling the
BluetoothAdapter
getProfileConnectionState()
method for apps targeting
Android 14 (API level 34) or higher.
This method already required the BLUETOOTH_CONNECT
permission, but it was not
enforced. Make sure your app declares BLUETOOTH_CONNECT
in your app's
AndroidManifest.xml
file as shown in the following snippet and check that
a user has granted the permission before calling
getProfileConnectionState
.
<uses-permission android:name="android.permission.BLUETOOTH_CONNECT" />
Aktualizacje OpenJDK 17
Android 14 kontynuuje proces odświeżania podstawowych bibliotek Androida, aby dostosować je do funkcji najnowszych wersji OpenJDK LTS, w tym do aktualizacji bibliotek i obsługi języka Java 17 dla deweloperów aplikacji i platform.
Niektóre z tych zmian mogą mieć wpływ na zgodność aplikacji:
- Zmiany w wyrażeniach regularnych: nieprawidłowe odwołania do grup są teraz niedozwolone, aby bardziej odpowiadać semantyce OpenJDK. Możesz zauważyć nowe przypadki, w których klasa
java.util.regex.Matcher
wyrzuca błądIllegalArgumentException
. Dlatego przetestuj aplikację pod kątem obszarów, które używają wyrażeń regularnych. Aby włączyć lub wyłączyć tę zmianę podczas testowania, włącz lub wyłącz flagęDISALLOW_INVALID_GROUP_REFERENCE
za pomocą narzędzi platformy zgodności. - Obsługa UUID: metoda
java.util.UUID.fromString()
przeprowadza teraz bardziej rygorystyczne kontrole podczas sprawdzania argumentu wejściowego, więc podczas deserializacji możesz zobaczyć błądIllegalArgumentException
. Aby włączyć lub wyłączyć tę zmianę podczas testowania, włącz lub wyłącz flagęENABLE_STRICT_VALIDATION
za pomocą narzędzi platformy zgodności. - Problemy z ProGuard: w niektórych przypadkach dodanie klasy
java.lang.ClassValue
powoduje problemy, gdy próbujesz zmniejszyć rozmiar, zaciemnić i zoptymalizować aplikację za pomocą ProGuard. Problem pochodzi z biblioteki Kotlina, która zmienia zachowanie w czasie wykonywania w zależności od tego, czy funkcjaClass.forName("java.lang.ClassValue")
zwraca klasę. Jeśli Twoja aplikacja została opracowana na podstawie starszej wersji środowiska uruchomieniowego bez dostępnej klasyjava.lang.ClassValue
, te optymalizacje mogą usunąć metodęcomputeValue
z klas wywodzących się z klasyjava.lang.ClassValue
.
JobScheduler wzmacnia wywołania zwrotne i zachowanie sieciowe
Since its introduction, JobScheduler expects your app to return from
onStartJob
or onStopJob
within a few seconds. Prior to Android 14,
if a job runs too long, the job is stopped and fails silently.
If your app targets Android 14 (API level 34) or higher and
exceeds the granted time on the main thread, the app triggers an ANR
with the error message "No response to onStartJob
" or
"No response to onStopJob
".
This ANR may be a result of 2 scenarios:
1. There is work blocking the main thread, preventing the callbacks onStartJob
or onStopJob
from executing and completing within the expected time limit.
2. The developer is running blocking work within the JobScheduler
callback onStartJob
or onStopJob
, preventing the callback from
completing within the expected time limit.
To address #1, you will need to further debug what is blocking the main thread
when the ANR occurs, you can do this using
ApplicationExitInfo#getTraceInputStream()
to get the tombstone
trace when the ANR occurs. If you're able to manually reproduce the ANR,
you can record a system trace and inspect the trace using either
Android Studio or Perfetto to better understand what is running on
the main thread when the ANR occurs.
Note that this can happen when using JobScheduler API directly
or using the androidx library WorkManager.
To address #2, consider migrating to WorkManager, which provides
support for wrapping any processing in onStartJob
or onStopJob
in an asynchronous thread.
JobScheduler
also introduces a requirement to declare the
ACCESS_NETWORK_STATE
permission if using setRequiredNetworkType
or
setRequiredNetwork
constraint. If your app does not declare the
ACCESS_NETWORK_STATE
permission when scheduling the job and is targeting
Android 14 or higher, it will result in a SecurityException
.
Interfejs API uruchamiania kafelków
For apps targeting 14 and higher,
TileService#startActivityAndCollapse(Intent)
is deprecated and now throws
an exception when called. If your app launches activities from tiles, use
TileService#startActivityAndCollapse(PendingIntent)
instead.
Prywatność
Częściowy dostęp do zdjęć i filmów
Android 14 引入了“已选照片访问权限”,让用户可以向应用授予对其媒体库中特定图片和视频的访问权限,而不是授予对给定类型的所有媒体的访问权限。
只有当您的应用以 Android 14(API 级别 34)或更高版本为目标平台时,此更改才会启用。如果您尚未使用照片选择器,我们建议您在应用中实现照片选择器,以提供一致的图片和视频选择体验,同时增强用户隐私保护,而无需请求任何存储权限。
如果您使用存储权限维护自己的图库选择器,并且需要对实现保持完全控制,请调整实现以使用新的 READ_MEDIA_VISUAL_USER_SELECTED
权限。如果您的应用不使用新权限,系统会以兼容模式运行您的应用。
Interfejs użytkownika
Zabezpieczanie powiadomień o intencjach pełnoekranowych
With Android 11 (API level 30), it was possible for any app to use
Notification.Builder.setFullScreenIntent
to send full-screen
intents while the phone is locked. You could auto-grant this on app install by
declaring USE_FULL_SCREEN_INTENT
permission in the
AndroidManifest.
Full-screen intent notifications are designed for extremely high-priority
notifications demanding the user's immediate attention, such as an incoming
phone call or alarm clock settings configured by the user. For apps targeting
Android 14 (API level 34) or higher, apps that are allowed to use this
permission are limited to those that provide calling and alarms only. The Google
Play Store revokes default USE_FULL_SCREEN_INTENT
permissions for any apps
that don't fit this profile. The deadline for these policy changes is May 31,
2024.
This permission remains enabled for apps installed on the phone before the user updates to Android 14. Users can turn this permission on and off.
You can use the new API
NotificationManager.canUseFullScreenIntent
to check if your app
has the permission; if not, your app can use the new intent
ACTION_MANAGE_APP_USE_FULL_SCREEN_INTENT
to launch the settings
page where users can grant the permission.
Bezpieczeństwo
Ograniczenia dotyczące niejawnych i oczekujących intencji
For apps targeting Android 14 (API level 34) or higher, Android restricts apps from sending implicit intents to internal app components in the following ways:
- Implicit intents are only delivered to exported components. Apps must either use an explicit intent to deliver to unexported components, or mark the component as exported.
- If an app creates a mutable pending intent with an intent that doesn't specify a component or package, the system throws an exception.
These changes prevent malicious apps from intercepting implicit intents that are intended for use by an app's internal components.
For example, here is an intent filter that could be declared in your app's manifest file:
<activity
android:name=".AppActivity"
android:exported="false">
<intent-filter>
<action android:name="com.example.action.APP_ACTION" />
<category android:name="android.intent.category.DEFAULT" />
</intent-filter>
</activity>
If your app tried to launch this activity using an implicit intent, an
ActivityNotFoundException
exception would be thrown:
Kotlin
// Throws an ActivityNotFoundException exception when targeting Android 14. context.startActivity(Intent("com.example.action.APP_ACTION"))
Java
// Throws an ActivityNotFoundException exception when targeting Android 14. context.startActivity(new Intent("com.example.action.APP_ACTION"));
To launch the non-exported activity, your app should use an explicit intent instead:
Kotlin
// This makes the intent explicit. val explicitIntent = Intent("com.example.action.APP_ACTION") explicitIntent.apply { package = context.packageName } context.startActivity(explicitIntent)
Java
// This makes the intent explicit. Intent explicitIntent = new Intent("com.example.action.APP_ACTION") explicitIntent.setPackage(context.getPackageName()); context.startActivity(explicitIntent);
Odbiorniki zarejestrowane w czasie działania muszą określać działanie dotyczące eksportu
Apps and services that target Android 14 (API level 34) or higher and use
context-registered receivers are required to specify a flag
to indicate whether or not the receiver should be exported to all other apps on
the device: either RECEIVER_EXPORTED
or RECEIVER_NOT_EXPORTED
, respectively.
This requirement helps protect apps from security vulnerabilities by leveraging
the features for these receivers introduced in Android 13.
Exception for receivers that receive only system broadcasts
If your app is registering a receiver only for
system broadcasts through Context#registerReceiver
methods, such as Context#registerReceiver()
, then it
shouldn't specify a flag when registering the receiver.
Bezpieczniejsze wczytywanie kodu dynamicznego
Jeśli Twoja aplikacja jest kierowana na Androida 14 (poziom interfejsu API 34) lub nowszego i korzysta z kodu dynamicznego Ładowanie (DCL) powoduje, że wszystkie dynamicznie ładowane pliki muszą być oznaczone jako tylko do odczytu. W przeciwnym razie system zgłasza wyjątek. Zalecamy, aby aplikacje unikały dynamiczne wczytywanie kodu bo to znacznie zwiększa ryzyko, że aplikacja został przejęty przez wstrzyknięcie kodu lub zmodyfikowanie kodu.
Jeśli musisz dynamicznie ładować kod, użyj następującej metody, aby ustawić atrybut dynamicznie ładowany (np. DEX, JAR czy APK) jako tylko do odczytu podczas otwierania pliku i do zapisywania treści:
Kotlin
val jar = File("DYNAMICALLY_LOADED_FILE.jar") val os = FileOutputStream(jar) os.use { // Set the file to read-only first to prevent race conditions jar.setReadOnly() // Then write the actual file content } val cl = PathClassLoader(jar, parentClassLoader)
Java
File jar = new File("DYNAMICALLY_LOADED_FILE.jar"); try (FileOutputStream os = new FileOutputStream(jar)) { // Set the file to read-only first to prevent race conditions jar.setReadOnly(); // Then write the actual file content } catch (IOException e) { ... } PathClassLoader cl = new PathClassLoader(jar, parentClassLoader);
Obsługa plików ładowanych dynamicznie, które już istnieją
Aby zapobiec wyrzucaniu wyjątków w przypadku istniejących plików wczytywanych dynamicznie, zalecamy usunięcie i ponowne utworzenie plików przed ponownym wczytaniem ich dynamicznie w aplikacji. Podczas ponownego tworzenia plików postępuj zgodnie z poprzednimi wskazówkami dotyczącymi oznaczania plików jako tylko do odczytu w momencie zapisu. Ewentualnie możesz zmienić etykiety istniejących plików na „tylko do odczytu”, ale w tym przypadku zdecydowanie zalecamy wcześniejsze sprawdzenie integralności plików (na przykład porównując podpis pliku z zaufaną wartością), pomaga to chronić aplikację przed złośliwymi działaniami.
Dodatkowe ograniczenia dotyczące rozpoczynania działań w tle
For apps targeting Android 14 (API level 34) or higher, the system further restricts when apps are allowed to start activities from the background:
- When an app sends a
PendingIntent
usingPendingIntent#send()
or similar methods, the app must opt in if it wants to grant its own background activity launch privileges to start the pending intent. To opt in, the app should pass anActivityOptions
bundle withsetPendingIntentBackgroundActivityStartMode(MODE_BACKGROUND_ACTIVITY_START_ALLOWED)
. - When a visible app binds a service of another app that's in the background
using the
bindService()
method, the visible app must now opt in if it wants to grant its own background activity launch privileges to the bound service. To opt in, the app should include theBIND_ALLOW_ACTIVITY_STARTS
flag when calling thebindService()
method.
These changes expand the existing set of restrictions to protect users by preventing malicious apps from abusing APIs to start disruptive activities from the background.
Przemierzanie ścieżki ZIP
For apps targeting Android 14 (API level 34) or higher, Android prevents the Zip
Path Traversal Vulnerability in the following way:
ZipFile(String)
and
ZipInputStream.getNextEntry()
throws a
ZipException
if zip file entry names contain ".." or start
with "/".
Apps can opt-out from this validation by calling
dalvik.system.ZipPathValidator.clearCallback()
.
Wymagana zgoda użytkownika w przypadku każdej sesji przechwytywania MediaProjection
For apps targeting Android 14 (API level 34) or higher, a SecurityException
is
thrown by MediaProjection#createVirtualDisplay
in either of the following
scenarios:
- Your app caches the
Intent
that is returned fromMediaProjectionManager#createScreenCaptureIntent
, and passes it multiple times toMediaProjectionManager#getMediaProjection
. - Your app invokes
MediaProjection#createVirtualDisplay
multiple times on the sameMediaProjection
instance.
Your app must ask the user to give consent before each capture session. A single
capture session is a single invocation on
MediaProjection#createVirtualDisplay
, and each MediaProjection
instance must
be used only once.
Handle configuration changes
If your app needs to invoke MediaProjection#createVirtualDisplay
to handle
configuration changes (such as the screen orientation or screen size changing),
you can follow these steps to update the VirtualDisplay
for the existing
MediaProjection
instance:
- Invoke
VirtualDisplay#resize
with the new width and height. - Provide a new
Surface
with the new width and height toVirtualDisplay#setSurface
.
Register a callback
Your app should register a callback to handle cases where the user doesn't grant
consent to continue a capture session. To do this, implement
Callback#onStop
and have your app release any related resources (such as
the VirtualDisplay
and Surface
).
If your app doesn't register this callback,
MediaProjection#createVirtualDisplay
throws an IllegalStateException
when your app invokes it.
Zaktualizowane ograniczenia dotyczące interfejsów API innych niż SDK
Android 14 zawiera zaktualizowane listy ograniczonych interfejsów innych niż SDK, które powstały na podstawie współpracy z deweloperami Androida i najnowszych testów wewnętrznych. W miarę możliwości przed ograniczeniem interfejsów innych niż SDK udostępniamy publiczne alternatywy.
Jeśli Twoja aplikacja nie jest kierowana na Androida 14, niektóre z tych zmian mogą nie mieć na nią natychmiastowego wpływu. Obecnie możesz używać niektórych interfejsów spoza SDK (w zależności od docelowego poziomu interfejsu API aplikacji), ale używanie dowolnej metody lub pola spoza SDK zawsze wiąże się z wysokim ryzykiem awarii aplikacji.
Jeśli nie masz pewności, czy Twoja aplikacja używa interfejsów innych niż SDK, możesz to sprawdzić, testując ją. Jeśli Twoja aplikacja korzysta z interfejsów spoza SDK, zacznij planować migrację na alternatywne rozwiązania SDK. Rozumiemy jednak, że w przypadku niektórych aplikacji używanie interfejsów innych niż SDK jest uzasadnione. Jeśli nie możesz znaleźć alternatywy dla używania interfejsu innego niż SDK w przypadku funkcji w aplikacji, poproś o nowy publiczny interfejs API.
Więcej informacji o zmianach w tej wersji Androida znajdziesz w artykule Zmiany ograniczeń interfejsu niebędącego interfejsem SDK w Androidzie 14. Więcej informacji o interfejsach innych niż SDK znajdziesz w artykule Ograniczenia dotyczące interfejsów innych niż SDK.