Как и в предыдущих версиях, Android 15 включает изменения в поведении, которые могут повлиять на ваше приложение. Следующие изменения в поведении применяются исключительно к приложениям, предназначенным для Android 15 и более поздних версий. Если ваше приложение предназначено для Android 15 и более поздних версий, вам следует изменить его для корректной поддержки этих изменений, где это применимо.
Обязательно ознакомьтесь со списком изменений поведения, которые влияют на все приложения, работающие на Android 15, независимо от targetSdkVersion
вашего приложения.
Основная функциональность
Android 15 изменяет или расширяет различные основные возможности системы Android.
Изменения в приоритетных службах
We are making the following changes to foreground services with Android 15.
- Data sync foreground service timeout behavior
- New media processing foreground service type
- Restrictions on
BOOT_COMPLETED
broadcast receivers launching foreground services - Restrictions on starting foreground services while an app holds the
SYSTEM_ALERT_WINDOW
permission
Data sync foreground service timeout behavior
В Android 15 представлен новый режим тайм-аута для dataSync
для приложений, предназначенных для Android 15 (уровень API 35) или выше. Это поведение также применимо к новому типу службы переднего плана mediaProcessing
.
Система разрешает службам dataSync
приложения работать в общей сложности 6 часов в течение 24-часового периода, после чего система вызывает метод Service.onTimeout(int, int)
работающей службы (представленный в Android 15). В это время у службы есть несколько секунд для вызова Service.stopSelf()
. При вызове Service.onTimeout()
служба больше не считается службой переднего плана. Если служба не вызывает Service.stopSelf()
, система выдает внутреннее исключение. Исключение регистрируется в Logcat со следующим сообщением:
Fatal Exception: android.app.RemoteServiceException: "A foreground service of
type dataSync did not stop within its timeout: [component name]"
Чтобы избежать проблем с этим изменением поведения, вы можете выполнить одно или несколько из следующих действий:
- Пусть ваш сервис реализует новый метод
Service.onTimeout(int, int)
. Когда ваше приложение получит обратный вызов, обязательно вызовитеstopSelf()
в течение нескольких секунд. (Если вы не остановите приложение сразу, система выдаст ошибку.) - Убедитесь, что службы
dataSync
вашего приложения не работают более 6 часов в течение 24-часового периода (если только пользователь не взаимодействует с приложением, сбрасывая таймер). - Запускайте службы
dataSync
переднего плана только в результате прямого взаимодействия с пользователем; поскольку ваше приложение находится на переднем плане при запуске службы, у вашей службы есть полные шесть часов после того, как приложение перейдет в фоновый режим. - Вместо использования службы переднего плана
dataSync
используйте альтернативный API .
Если службы приоритетного плана dataSync
вашего приложения работали в течение 6 часов за последние 24 часа, вы не сможете запустить другую службу приоритетного плана dataSync
, пока пользователь не переведет ваше приложение на передний план (что сбрасывает таймер). Если вы попытаетесь запустить другую службу переднего плана dataSync
, система выдаст исключение ForegroundServiceStartNotAllowedException
с сообщением об ошибке, например «Ограничение времени для типа службы переднего плана dataSync уже исчерпано».
Тестирование
Чтобы проверить поведение вашего приложения, вы можете включить таймауты синхронизации данных, даже если ваше приложение не предназначено для Android 15 (при условии, что приложение работает на устройстве Android 15). Чтобы включить таймауты, выполните следующую команду adb
:
adb shell am compat enable FGS_INTRODUCE_TIME_LIMITS your-package-name
Вы также можете настроить период ожидания, чтобы было проще протестировать поведение вашего приложения при достижении предела. Чтобы установить новый период ожидания, выполните следующую команду adb
:
adb shell device_config put activity_manager data_sync_fgs_timeout_duration duration-in-milliseconds
New media processing foreground service type
Android 15 引入了一种新的前台服务类型 mediaProcessing
。此服务类型适用于转码媒体文件等操作。例如,媒体应用可能会下载音频文件,并需要先将其转换为其他格式,然后才能播放。您可以使用 mediaProcessing
前台服务,确保即使应用在后台运行时转换也会继续。
系统允许应用的 mediaProcessing
服务在 24 小时内总共运行 6 小时,之后系统会调用正在运行的服务的 Service.onTimeout(int, int)
方法(在 Android 15 中引入)。此时,服务有几秒钟的时间来调用 Service.stopSelf()
。如果服务未调用 Service.stopSelf()
,系统会抛出内部异常。系统会在 Logcat 中记录此异常,并显示以下消息:
Fatal Exception: android.app.RemoteServiceException: "A foreground service of
type mediaProcessing did not stop within its timeout: [component name]"
为避免出现此异常,您可以执行以下任一操作:
- 让您的服务实现新的
Service.onTimeout(int, int)
方法。当您的应用收到回调时,请务必在几秒钟内调用stopSelf()
。(如果您未立即停止应用,系统会生成失败情况。) - 确保应用的
mediaProcessing
服务在任何 24 小时内总运行时间不超过 6 小时(除非用户与应用互动,重置计时器)。 - 仅在有直接用户互动时启动
mediaProcessing
前台服务;由于服务启动时应用位于前台,因此您的服务在应用进入后台后有完整的 6 小时时间。 - 请改用 替代 API(例如 WorkManager),而不是使用
mediaProcessing
前台服务。
如果您的应用的 mediaProcessing
前台服务在过去 24 小时内运行了 6 小时,则您无法启动其他 mediaProcessing
前台服务,除非用户将您的应用切换到前台(这会重置计时器)。如果您尝试启动另一个 mediaProcessing
前台服务,系统会抛出 ForegroundServiceStartNotAllowedException
,并显示类似于“前台服务类型 mediaProcessing 的时间限制已用尽”的错误消息。
如需详细了解 mediaProcessing
服务类型,请参阅 Android 15 前台服务类型变更:媒体处理。
测试
如需测试应用的行为,您可以启用媒体处理超时,即使您的应用并非以 Android 15 为目标平台也是如此(前提是应用在 Android 15 设备上运行)。如需启用超时,请运行以下 adb
命令:
adb shell am compat enable FGS_INTRODUCE_TIME_LIMITS your-package-name
您还可以调整超时期限,以便更轻松地测试应用在达到上限时的行为方式。如需设置新的超时期限,请运行以下 adb
命令:
adb shell device_config put activity_manager media_processing_fgs_timeout_duration duration-in-milliseconds
Restrictions on BOOT_COMPLETED
broadcast receivers launching foreground services
There are new restrictions on BOOT_COMPLETED
broadcast receivers launching
foreground services. BOOT_COMPLETED
receivers are not allowed to launch the
following types of foreground services:
dataSync
camera
mediaPlayback
phoneCall
mediaProjection
microphone
(this restriction has been in place formicrophone
since Android 14)
If a BOOT_COMPLETED
receiver tries to launch any of those types of foreground
services, the system throws ForegroundServiceStartNotAllowedException
.
Testing
To test your app's behavior, you can enable these new restrictions even if your
app is not targeting Android 15 (as long as the app is running on an Android 15
device). Run the following adb
command:
adb shell am compat enable FGS_BOOT_COMPLETED_RESTRICTIONS your-package-name
To send a BOOT_COMPLETED
broadcast without restarting the device,
run the following adb
command:
adb shell am broadcast -a android.intent.action.BOOT_COMPLETED your-package-name
Restrictions on starting foreground services while an app holds the SYSTEM_ALERT_WINDOW
permission
Previously, if an app held the SYSTEM_ALERT_WINDOW
permission, it could launch
a foreground service even if the app was currently in the background (as
discussed in exemptions from background start restrictions).
If an app targets Android 15, this exemption is now narrower. The app now needs
to have the SYSTEM_ALERT_WINDOW
permission and also have a visible overlay
window. That is, the app needs to first launch a
TYPE_APPLICATION_OVERLAY
window and the window
needs to be visible before you start a foreground service.
If your app attempts to start a foreground service from the background without
meeting these new requirements (and it does not have some other exemption), the
system throws ForegroundServiceStartNotAllowedException
.
If your app declares the SYSTEM_ALERT_WINDOW
permission
and launches foreground services from the background, it may be affected by this
change. If your app gets a ForegroundServiceStartNotAllowedException
, check
your app's order of operations and make sure your app already has an active
overlay window before it attempts to start a foreground service from the
background. You can check if your overlay window is currently visible
by calling View.getWindowVisibility()
, or you
can override View.onWindowVisibilityChanged()
to get notified whenever the visibility changes.
Testing
To test your app's behavior, you can enable these new restrictions even if your
app is not targeting Android 15 (as long as the app is running on an Android 15
device). To enable these new restrictions on starting foreground services
from the background, run the following adb
command:
adb shell am compat enable FGS_SAW_RESTRICTIONS your-package-name
Изменения в том, когда приложения могут изменять глобальное состояние режима «Не беспокоить»
以 Android 15(API 级别 35)及更高版本为目标平台的应用无法再更改设备上的勿扰 (DND) 功能的全局状态或政策(无论是通过修改用户设置还是关闭勿扰模式)。相反,应用必须提供 AutomaticZenRule
,系统会将其与现有的“最严格的政策优先”方案合并为一个全局政策。对之前会影响全局状态的现有 API 的调用(setInterruptionFilter
、setNotificationPolicy
)会导致创建或更新隐式 AutomaticZenRule
,该 AutomaticZenRule
会根据这些 API 调用的调用周期开启和关闭。
请注意,只有当应用调用 setInterruptionFilter(INTERRUPTION_FILTER_ALL)
并希望该调用停用之前由其所有者激活的 AutomaticZenRule
时,此更改才会影响可观察到的行为。
Изменения API OpenJDK
Android 15 将继续更新 Android 的核心库,以与最新 OpenJDK LTS 版本中的功能保持一致。
以下变更可能会影响以 Android 15(API 级别 35)为目标平台的应用的兼容性:
对字符串格式化 API 进行了更改:现在,使用以下
String.format()
和Formatter.format()
API 时,对实参索引、标志、宽度和精度的验证要求变得更加严格:String.format(String, Object[])
String.format(Locale, String, Object[])
Formatter.format(String, Object[])
Formatter.format(Locale, String, Object[])
例如,当使用参数索引 0(格式字符串中的
%0
)时,系统会抛出以下异常:IllegalFormatArgumentIndexException: Illegal format argument index = 0
在这种情况下,可以使用实参索引 1(格式字符串中的
%1
)来解决此问题。对
Arrays.asList(...).toArray()
的组件类型的更改:使用Arrays.asList(...).toArray()
时,所得数组的组件类型现在是Object
,而不是底层数组元素的类型。因此,以下代码会抛出ClassCastException
:String[] elements = (String[]) Arrays.asList("one", "two").toArray();
在这种情况下,为了在生成的数组中保留
String
作为组件类型,您可以改用Collection.toArray(Object[])
:String[] elements = Arrays.asList("two", "one").toArray(new String[0]);
语言代码处理方面的变化:使用
Locale
API 时,希伯来语、意第绪语和印度尼西亚语的语言代码不再转换为其过时的形式(希伯来语:iw
、意第绪语:ji
和印度尼西亚语:in
)。指定这些语言区域的语言代码时,请改用 ISO 639-1 中的代码(希伯来语:he
、意第绪语:yi
和印度尼西亚语:id
)。对随机整数序列的更改:根据 https://bugs.openjdk.org/browse/JDK-8301574 中所做的更改,以下
Random.ints()
方法现在返回的数字序列与Random.nextInt()
方法返回的数字序列不同:一般来说,此更改不应导致应用行为中断,但您的代码不应期望从
Random.ints()
方法生成的序列与Random.nextInt()
相匹配。
新的 SequencedCollection
API 可能会影响您应用的兼容性,具体取决于您是否在应用的 build 配置中更新 compileSdk
以使用 Android 15(API 级别 35):
kotlin-stdlib
中MutableList.removeFirst()
和MutableList.removeLast()
扩展函数的冲突Java 中的
List
类型会映射到 Kotlin 中的MutableList
类型。 由于List.removeFirst()
和List.removeLast()
API 已在 Android 15(API 级别 35)中引入,因此 Kotlin 编译器会将函数调用(例如list.removeFirst()
)静态解析为新的List
API,而不是kotlin-stdlib
中的扩展函数。如果应用重新编译时将
compileSdk
设置为35
,并将minSdk
设置为34
或更低值,然后在 Android 14 及更低版本上运行该应用,则会抛出运行时错误:java.lang.NoSuchMethodError: No virtual method removeFirst()Ljava/lang/Object; in class Ljava/util/ArrayList;
Android Gradle 插件中现有的
NewApi
lint 选项可以捕获这些新的 API 用法。./gradlew lint
MainActivity.kt:41: Error: Call requires API level 35 (current min is 34): java.util.List#removeFirst [NewApi] list.removeFirst()为了修复运行时异常和 lint 错误,可以在 Kotlin 中将
removeFirst()
和removeLast()
函数调用分别替换为removeAt(0)
和removeAt(list.lastIndex)
。如果您使用的是 Android Studio Ladybug | 2024.1.3 或更高版本,它还会针对这些错误提供快速修复选项。如果已停用 lint 选项,请考虑移除
@SuppressLint("NewApi")
和lintOptions { disable 'NewApi' }
。与 Java 中的其他方法发生冲突
现有类型中添加了新方法,例如
List
和Deque
。这些新方法可能与具有相同名称和实参类型的其他接口和类中的方法不兼容。如果方法签名发生不兼容的冲突,javac
编译器会输出 build 时错误。例如:错误示例 1:
javac MyList.java
MyList.java:135: error: removeLast() in MyList cannot implement removeLast() in List public void removeLast() { ^ return type void is not compatible with Object where E is a type-variable: E extends Object declared in interface List错误示例 2:
javac MyList.java
MyList.java:7: error: types Deque<Object> and List<Object> are incompatible; public class MyList implements List<Object>, Deque<Object> { both define reversed(), but with unrelated return types 1 error错误示例 3:
javac MyList.java
MyList.java:43: error: types List<E#1> and MyInterface<E#2> are incompatible; public static class MyList implements List<Object>, MyInterface<Object> { class MyList inherits unrelated defaults for getFirst() from types List and MyInterface where E#1,E#2 are type-variables: E#1 extends Object declared in interface List E#2 extends Object declared in interface MyInterface 1 error如需修复这些 build 错误,实现这些接口的类应使用兼容的返回类型替换相应方法。例如:
@Override public Object getFirst() { return List.super.getFirst(); }
Безопасность
В Android 15 включены изменения, повышающие безопасность системы и помогающие защитить приложения и пользователей от вредоносных приложений.
Ограниченные версии TLS
Android 15 restricts the usage of TLS versions 1.0 and 1.1. These versions had previously been deprecated in Android, but are now disallowed for apps targeting Android 15.
Защищенные запуски фоновой активности
Android 15 可保护用户免受恶意应用的侵害,并让用户更好地控制 来防止恶意后台应用 将其他应用置于前台、提升其权限以及滥用 用户互动自以下时间以来,后台活动启动一直受到限制 Android 10(API 级别 29)。
其他变更
除了 UID 匹配限制之外,还包括以下其他更改:
- 默认情况下,将
PendingIntent
创建者更改为屏蔽后台活动启动。这有助于防止应用意外创建可能会被恶意操作者滥用的PendingIntent
。 - 除非
PendingIntent
发件人允许,否则请勿将应用调至前台。此变更旨在防止恶意应用滥用 在后台启动 activity 的功能。默认情况下,应用 允许将任务堆栈转到前台,除非创建者允许 后台活动启动权限或发送者有后台活动 启动权限 - 控制任务堆栈顶部 activity 如何完成其任务。如果顶部 activity 完成任务,Android 将返回上次处于活动状态的任务。此外,如果非顶层 activity 完成其任务,Android 将 返回主屏幕;它不会挡住这个非顶层的 活动。
- 防止将其他应用中的任意 activity 启动到您自己的 activity 任务。这项变更可防止恶意应用通过创建看似来自其他应用的 activity 来钓鱼式攻击用户。
- 阻止系统考虑非可见窗口来启动后台 activity。这有助于防止恶意应用滥用后台 activity 启动来向用户显示不需要或恶意的内容。
Более безопасные намерения
Android 15 引入了新的可选安全措施,以提高 intent 的安全性 和更强大的模型。这些变更旨在防范潜在的漏洞, 可能会被恶意应用利用的 intent 滥用。Android 15 对 intent 的安全性进行了两项主要改进:
- 匹配目标 intent 过滤器:针对特定组件的 intent 准确匹配目标的 intent 过滤器规范。如果您发送 intent 来启动另一个应用的 activity,则目标 intent 组件需要 与接收 activity 声明的 intent 过滤器保持一致。
- intent 必须包含操作:不含操作的 intent 将不再与任何 intent 过滤器匹配。也就是说,用于启动 activity 或 服务都必须有明确定义的操作。
要检查应用如何响应这些更改,请使用
StrictMode
。要查看详细的
关于 Intent
使用违规行为的日志,请添加以下方法:
Kotlin
fun onCreate() { StrictMode.setVmPolicy(VmPolicy.Builder() .detectUnsafeIntentLaunch() .build() ) }
Java
public void onCreate() { StrictMode.setVmPolicy(new VmPolicy.Builder() .detectUnsafeIntentLaunch() .build()); }
Пользовательский опыт и системный пользовательский интерфейс
В Android 15 внесены некоторые изменения, направленные на создание более последовательного и интуитивно понятного пользовательского опыта.
Изменения в оконной вставке
Есть два изменения, связанных с вставками окон в Android 15: по умолчанию применяется сквозное изображение, а также есть изменения конфигурации, такие как конфигурация системных панелей по умолчанию.
Edge-to-edge enforcement
Apps are edge-to-edge by default on devices running Android 15 if the app is targeting Android 15 (API level 35).

This is a breaking change that might negatively impact your app's UI. The changes affect the following UI areas:
- Gesture handle navigation bar
- Transparent by default.
- Bottom offset is disabled so content draws behind the system navigation bar unless insets are applied.
setNavigationBarColor
andR.attr#navigationBarColor
are deprecated and don't affect gesture navigation.setNavigationBarContrastEnforced
andR.attr#navigationBarContrastEnforced
continue to have no effect on gesture navigation.
- 3-button navigation
- Opacity set to 80% by default, with color possibly matching the window background.
- Bottom offset disabled so content draws behind the system navigation bar unless insets are applied.
setNavigationBarColor
andR.attr#navigationBarColor
are set to match the window background by default. The window background must be a color drawable for this default to apply. This API is deprecated but continues to affect 3-button navigation.setNavigationBarContrastEnforced
andR.attr#navigationBarContrastEnforced
is true by default, which adds an 80% opaque background across 3-button navigation.
- Status bar
- Transparent by default.
- The top offset is disabled so content draws behind the status bar unless insets are applied.
setStatusBarColor
andR.attr#statusBarColor
are deprecated and have no effect on Android 15.setStatusBarContrastEnforced
andR.attr#statusBarContrastEnforced
are deprecated but still have an effect on Android 15.
- Display cutout
layoutInDisplayCutoutMode
of non-floating windows must beLAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS
.SHORT_EDGES
,NEVER
, andDEFAULT
are interpreted asALWAYS
so that users don't see a black bar caused by the display cutout and appear edge-to-edge.
The following example shows an app before and after targeting Android 15 (API level 35), and before and after applying insets. This example is not comprehensive, this might appear differently on Android Auto.



What to check if your app is already edge-to-edge
If your app is already edge-to-edge and applies insets, you are mostly unimpacted, except in the following scenarios. However, even if you think you aren't impacted, we recommend you test your app.
- You have a non-floating window, such as an
Activity
that usesSHORT_EDGES
,NEVER
orDEFAULT
instead ofLAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS
. If your app crashes on launch, this might be due to your splashscreen. You can either upgrade the core splashscreen dependency to 1.2.0-alpha01 or later or setwindow.attributes.layoutInDisplayCutoutMode = WindowManager.LayoutInDisplayCutoutMode.always
. - There might be lower-traffic screens with occluded UI. Verify these
less-visited screens don't have occluded UI. Lower-traffic screens include:
- Onboarding or sign-in screens
- Settings pages
What to check if your app is not already edge-to-edge
If your app is not already edge-to-edge, you are most likely impacted. In addition to the scenarios for apps that are already edge-to-edge, you should consider the following:
- If your app uses Material 3 Components (
androidx.compose.material3
) in compose, such asTopAppBar
,BottomAppBar
, andNavigationBar
, these components are likely not impacted because they automatically handle insets. - If your app is using Material 2 Components (
androidx.compose.material
) in Compose, these components don't automatically handle insets. However, you can get access to the insets and apply them manually. In androidx.compose.material 1.6.0 and later, use thewindowInsets
parameter to apply the insets manually forBottomAppBar
,TopAppBar
,BottomNavigation
, andNavigationRail
. Likewise, use thecontentWindowInsets
parameter forScaffold
. - If your app uses views and Material Components
(
com.google.android.material
), most views-based Material Components such asBottomNavigationView
,BottomAppBar
,NavigationRailView
, orNavigationView
, handle insets and require no additional work. However, you need to addandroid:fitsSystemWindows="true"
if usingAppBarLayout
. - For custom composables, apply the insets manually as padding. If your
content is within a
Scaffold
, you can consume insets using theScaffold
padding values. Otherwise, apply padding using one of theWindowInsets
. - If your app is using views and
BottomSheet
,SideSheet
or custom containers, apply padding usingViewCompat.setOnApplyWindowInsetsListener
. ForRecyclerView
, apply padding using this listener and also addclipToPadding="false"
.
What to check if your app must offer custom background protection
If your app must offer custom background protection to 3-button navigation or
the status bar, your app should place a composable or view behind the system bar
using WindowInsets.Type#tappableElement()
to get the 3-button
navigation bar height or WindowInsets.Type#statusBars
.
Additional edge-to-edge resources
See the Edge to Edge Views and Edge to Edge Compose guides for additional considerations on applying insets.
Deprecated APIs
The following APIs are deprecated but not disabled:
R.attr#enforceStatusBarContrast
R.attr#navigationBarColor
(for 3 button navigation, with 80% alpha)Window#isStatusBarContrastEnforced
Window#setNavigationBarColor
(for 3 button navigation, with 80% alpha)Window#setStatusBarContrastEnforced
The following APIs are deprecated and disabled:
R.attr#navigationBarColor
(for gesture navigation)R.attr#navigationBarDividerColor
R.attr#statusBarColor
Window#setDecorFitsSystemWindows
Window#getNavigationBarColor
Window#getNavigationBarDividerColor
Window#getStatusBarColor
Window#setNavigationBarColor
(for gesture navigation)Window#setNavigationBarDividerColor
Window#setStatusBarColor
Stable configuration
If your app targets Android 15 (API level 35) or higher, Configuration
no
longer excludes the system bars. If you use the screen size in the
Configuration
class for layout calculation, you should replace it with better
alternatives like an appropriate ViewGroup
, WindowInsets
, or
WindowMetricsCalculator
depending on your need.
Configuration
has been available since API 1. It is typically obtained from
Activity.onConfigurationChanged
. It provides information like window density,
orientation, and sizes. One important characteristic about the window sizes
returned from Configuration
is that it previously excluded the system bars.
The configuration size is typically used for resource selection, such as
/res/layout-h500dp
, and this is still a valid use case. However, using it for
layout calculation has always been discouraged. If you do so, you should move
away from it now. You should replace the use of Configuration
with something
more suitable depending on your use case.
If you use it to calculate the layout, use an appropriate ViewGroup
, such as
CoordinatorLayout
or ConstraintLayout
. If you use it to determine the height
of the system navbar, use WindowInsets
. If you want to know the current size
of your app window, use computeCurrentWindowMetrics
.
The following list describes the fields affected by this change:
Configuration.screenWidthDp
andscreenHeightDp
sizes no longer exclude the system bars.Configuration.smallestScreenWidthDp
is indirectly affected by changes toscreenWidthDp
andscreenHeightDp
.Configuration.orientation
is indirectly affected by changes toscreenWidthDp
andscreenHeightDp
on close-to-square devices.Display.getSize(Point)
is indirectly affected by the changes inConfiguration
. This was deprecated beginning in API level 30.Display.getMetrics()
has already worked like this since API level 33.
Атрибут elegantTextHeight по умолчанию имеет значение true
对于以 Android 15(API 级别 35)为目标平台的应用,elegantTextHeight
TextView
属性默认会变为 true
,将默认使用的紧凑字体替换为一些具有较大垂直测量的脚本,使其更易于阅读。紧凑字体旨在防止布局中断;Android 13(API 级别 33)允许文本布局利用 fallbackLineSpacing
属性拉伸垂直高度,从而防止许多此类中断。
在 Android 15 中,系统中仍保留了紧凑字体,因此您的应用可以将 elegantTextHeight
设置为 false
以获得与之前相同的行为,但即将发布的版本不太可能支持此字体。因此,如果您的应用支持以下脚本:阿拉伯语、老挝语、缅甸语、泰米尔语、古吉拉特语、卡纳达语、马拉雅拉姆语、奥里亚语、泰卢固语或泰语,请将 elegantTextHeight
设置为 true
以测试您的应用。

elegantTextHeight
行为。
elegantTextHeight
行为。Изменение ширины TextView для сложных форм букв
В предыдущих версиях Android некоторые рукописные шрифты или языки сложной формы могли отображать буквы в области предыдущего или следующего символа. В некоторых случаях такие буквы обрезались в начальной или конечной позиции. Начиная с Android 15, TextView
выделяет ширину для рисования достаточного места для таких букв и позволяет приложениям запрашивать дополнительные поля слева, чтобы предотвратить обрезку.
Поскольку это изменение влияет на то, как TextView
определяет ширину, TextView
по умолчанию выделяет большую ширину, если приложение предназначено для Android 15 (уровень API 35) или выше. Вы можете включить или отключить это поведение, вызвав API setUseBoundsForWidth
в TextView
.
Поскольку добавление левого отступа может привести к смещению существующих макетов, отступы не добавляются по умолчанию даже для приложений, ориентированных на Android 15 или более позднюю версию. Однако вы можете добавить дополнительные отступы для предотвращения обрезки, вызвав setShiftDrawingOffsetForStartOverhang
.
В следующих примерах показано, как эти изменения могут улучшить макет текста для некоторых шрифтов и языков.

<TextView android:fontFamily="cursive" android:text="java" />

<TextView android:fontFamily="cursive" android:text="java" android:useBoundsForWidth="true" android:shiftDrawingOffsetForStartOverhang="true" />

<TextView android:text="คอมพิวเตอร์" />

<TextView android:text="คอมพิวเตอร์" android:useBoundsForWidth="true" android:shiftDrawingOffsetForStartOverhang="true" />
Высота строки по умолчанию для EditText с учетом локали
在较低版本的 Android 中,文本布局会拉伸文本的高度,以满足与当前语言区域匹配的字体的行高。例如,如果内容是日语,由于日语字体的行高略高于拉丁字体,因此文本的高度会略高。不过,尽管行高存在这些差异,但无论使用的是哪种语言区域,EditText
元素的大小都是统一的,如下图所示:

EditText
元素。EditText
的高度相同,即使这些语言的行高各不相同。对于以 Android 15(API 级别 35)为目标平台的应用,现在为 EditText
预留了最小行高,以匹配指定语言区域的参考字体,如下图所示:

EditText
元素。EditText
的高度现在包含足够的空间来容纳这些语言字体的默认行高。如有需要,您的应用可以将 useLocalePreferredLineHeightForMinimum
属性指定为 false
,以恢复之前的行为;您的应用还可以在 Kotlin 和 Java 中使用 setMinimumFontMetrics
API 设置自定义最小垂直指标。
Камера и медиа
Android 15 вносит следующие изменения в поведение камеры и мультимедиа для приложений, предназначенных для Android 15 или более поздних версий.
Ограничения на запрос аудиофокуса
以 Android 15(API 级别 35)为目标平台的应用必须是顶部应用或正在运行前台服务,才能请求音频焦点。如果应用在未满足上述任一要求的情况下尝试请求焦点,调用将返回 AUDIOFOCUS_REQUEST_FAILED
。
如需详细了解音频焦点,请参阅管理音频焦点。
Обновлены ограничения, не связанные с SDK
Android 15 包含更新后的受限非 SDK 接口列表(基于与 Android 开发者之间的协作以及最新的内部测试)。在限制使用非 SDK 接口之前,我们会尽可能确保有可用的公开替代方案。
如果您的应用并非以 Android 15 为目标平台,其中一些变更可能不会立即对您产生影响。不过,虽然您的应用可以访问某些非 SDK 接口(具体取决于应用的目标 API 级别),但只要您使用任何非 SDK 方法或字段,终归存在导致应用出问题的显著风险。
如果您不确定自己的应用是否使用了非 SDK 接口,则可以测试该应用,进行确认。如果您的应用依赖于非 SDK 接口,则应该开始计划迁移到 SDK 替代方案。不过,我们知道某些应用具有使用非 SDK 接口的有效用例。如果您无法为应用中的某项功能找到使用非 SDK 接口的替代方案,则应该请求新的公共 API。
To learn more about the changes in this release of Android, see Updates to non-SDK interface restrictions in Android 15. To learn more about non-SDK interfaces generally, see Restrictions on non-SDK interfaces.