行为变更：以 Android 15 或更高版本为目标平台的应用

与之前的版本一样，Android 15 包含一些可能会影响您的应用的行为变更。以下行为变更仅影响以 Android 15 或更高版本为目标平台的应用。如果您的应用以 Android 15 或更高版本为目标平台，您应该修改自己的应用以适当地支持这些行为（如果适用）。

请务必查看对 Android 15 上运行的所有应用都有影响的行为变更列表（无论应用的 targetSdkVersion 如何）。

核心功能

Android 15 修改或扩展了 Android 系统的各种核心功能。

前台服务变更

We are making the following changes to foreground services with Android 15.

• Data sync foreground service timeout behavior
• New media processing foreground service type
• Restrictions on BOOT_COMPLETED broadcast receivers launching foreground services
• Restrictions on starting foreground services while an app holds the SYSTEM_ALERT_WINDOW permission

Data sync foreground service timeout behavior

Android 15 introduces a new timeout behavior to dataSync for apps targeting Android 15 (API level 35) or higher. This behavior also applies to the new mediaProcessing foreground service type.

The system permits an app's dataSync services to run for a total of 6 hours in a 24-hour period, after which the system calls the running service's Service.onTimeout(int, int) method (introduced in Android 15). At this time, the service has a few seconds to call Service.stopSelf(). When Service.onTimeout() is called, the service is no longer considered a foreground service. If the service does not call Service.stopSelf(), the system throws an internal exception. The exception is logged in Logcat with the following message:

Fatal Exception: android.app.RemoteServiceException: "A foreground service of
type dataSync did not stop within its timeout: [component name]"

Note: The 6-hour time limit is shared by all of an app's dataSync foreground services. For example, if an app runs a dataSync service for four hours, then starts a different dataSync service, that second service will only be allowed to run for two hours. However, if the user brings the app to the foreground, the timer resets and the app has 6 hours available.

To avoid problems with this behavior change, you can do one or more of the following:

1. Have your service implement the new Service.onTimeout(int, int) method. When your app receives the callback, make sure to call stopSelf() within a few seconds. (If you don't stop the app right away, the system generates a failure.)
2. Make sure your app's dataSync services don't run for more than a total of 6 hours in any 24-hour period (unless the user interacts with the app, resetting the timer).
3. Only start dataSync foreground services as a result of direct user interaction; since your app is in the foreground when the service starts, your service has the full six hours after the app goes to the background.
4. Instead of using a dataSync foreground service, use an alternative API.

If your app's dataSync foreground services have run for 6 hours in the last 24, you cannot start another dataSync foreground service unless the user has brought your app to the foreground (which resets the timer). If you try to start another dataSync foreground service, the system throws ForegroundServiceStartNotAllowedException with an error message like "Time limit already exhausted for foreground service type dataSync".

Testing

To test your app's behavior, you can enable data sync timeouts even if your app is not targeting Android 15 (as long as the app is running on an Android 15 device). To enable timeouts, run the following adb command:

adb shell am compat enable FGS_INTRODUCE_TIME_LIMITS your-package-name

You can also adjust the timeout period, to make it easier to test how your app behaves when the limit is reached. To set a new timeout period, run the following adb command:

adb shell device_config put activity_manager data_sync_fgs_timeout_duration duration-in-milliseconds

New media processing foreground service type

Android 15 introduces a new foreground service type, mediaProcessing. This service type is appropriate for operations like transcoding media files. For example, a media app might download an audio file and need to convert it to a different format before playing it. You can use a mediaProcessing foreground service to make sure the conversion continues even while the app is in the background.

The system permits an app's mediaProcessing services to run for a total of 6 hours in a 24-hour period, after which the system calls the running service's Service.onTimeout(int, int) method (introduced in Android 15). At this time, the service has a few seconds to call Service.stopSelf(). If the service does not call Service.stopSelf(), the system throws an internal exception. The exception is logged in Logcat with the following message:

Fatal Exception: android.app.RemoteServiceException: "A foreground service of
type mediaProcessing did not stop within its timeout: [component name]"

Note: The 6-hour time limit is shared by all of an app's mediaProcessing foreground services. For example, if an app runs a mediaProcessing service for four hours, then starts a different mediaProcessing service, that second service will only be allowed to run for two hours. However, if the user brings the app to the foreground, the timer resets and the app has 6 hours available.

To avoid having the exception, you can do one of the following:

1. Have your service implement the new Service.onTimeout(int, int) method. When your app receives the callback, make sure to call stopSelf() within a few seconds. (If you don't stop the app right away, the system generates a failure.)
2. Make sure your app's mediaProcessing services don't run for more than a total of 6 hours in any 24-hour period (unless the user interacts with the app, resetting the timer).
3. Only start mediaProcessing foreground services as a result of direct user interaction; since your app is in the foreground when the service starts, your service has the full six hours after the app goes to the background.
4. Instead of using a mediaProcessing foreground service, use an alternative API, like WorkManager.

If your app's mediaProcessing foreground services have run for 6 hours in the last 24, you cannot start another mediaProcessing foreground service unless the user has brought your app to the foreground (which resets the timer). If you try to start another mediaProcessing foreground service, the system throws ForegroundServiceStartNotAllowedException with an error message like "Time limit already exhausted for foreground service type mediaProcessing".

For more information about the mediaProcessing service type, see Changes to foreground service types for Android 15: Media processing.

Testing

To test your app's behavior, you can enable media processing timeouts even if your app is not targeting Android 15 (as long as the app is running on an Android 15 device). To enable timeouts, run the following adb command:

adb shell am compat enable FGS_INTRODUCE_TIME_LIMITS your-package-name

You can also adjust the timeout period, to make it easier to test how your app behaves when the limit is reached. To set a new timeout period, run the following adb command:

adb shell device_config put activity_manager media_processing_fgs_timeout_duration duration-in-milliseconds

Restrictions on BOOT_COMPLETED broadcast receivers launching foreground services

There are new restrictions on BOOT_COMPLETED broadcast receivers launching foreground services. BOOT_COMPLETED receivers are not allowed to launch the following types of foreground services:

• dataSync
• camera
• mediaPlayback
• phoneCall
• mediaProjection
• microphone (this restriction has been in place for microphone since Android 14)

If a BOOT_COMPLETED receiver tries to launch any of those types of foreground services, the system throws ForegroundServiceStartNotAllowedException.

Testing

To test your app's behavior, you can enable these new restrictions even if your app is not targeting Android 15 (as long as the app is running on an Android 15 device). Run the following adb command:

adb shell am compat enable FGS_BOOT_COMPLETED_RESTRICTIONS your-package-name

To send a BOOT_COMPLETED broadcast without restarting the device, run the following adb command:

adb shell am broadcast -a android.intent.action.BOOT_COMPLETED your-package-name

Restrictions on starting foreground services while an app holds the SYSTEM_ALERT_WINDOW permission

Previously, if an app held the SYSTEM_ALERT_WINDOW permission, it could launch a foreground service even if the app was currently in the background (as discussed in exemptions from background start restrictions).

If an app targets Android 15, this exemption is now narrower. The app now needs to have the SYSTEM_ALERT_WINDOW permission and also have a visible overlay window. That is, the app needs to first launch a TYPE_APPLICATION_OVERLAY window and the window needs to be visible before you start a foreground service.

If your app attempts to start a foreground service from the background without meeting these new requirements (and it does not have some other exemption), the system throws ForegroundServiceStartNotAllowedException.

If your app declares the SYSTEM_ALERT_WINDOW permission and launches foreground services from the background, it may be affected by this change. If your app gets a ForegroundServiceStartNotAllowedException, check your app's order of operations and make sure your app already has an active overlay window before it attempts to start a foreground service from the background. You can check if your overlay window is currently visible by calling View.getWindowVisibility(), or you can override View.onWindowVisibilityChanged() to get notified whenever the visibility changes.

Testing

To test your app's behavior, you can enable these new restrictions even if your app is not targeting Android 15 (as long as the app is running on an Android 15 device). To enable these new restrictions on starting foreground services from the background, run the following adb command:

adb shell am compat enable FGS_SAW_RESTRICTIONS your-package-name

更改了应用可以修改“勿扰”模式全局状态的时间

以 Android 15（API 级别 35）及更高版本为目标平台的应用无法再更改设备上的勿扰 (DND) 功能的全局状态或政策（无论是通过修改用户设置还是关闭勿扰模式）。相反，应用必须提供 AutomaticZenRule，系统会将其与现有的“最严格的政策优先”方案合并为一个全局政策。对之前会影响全局状态的现有 API 的调用（setInterruptionFilter、setNotificationPolicy）会导致创建或更新隐式 AutomaticZenRule，该 AutomaticZenRule 会根据这些 API 调用的调用周期开启和关闭。

请注意，只有当应用调用 setInterruptionFilter(INTERRUPTION_FILTER_ALL) 并希望该调用停用之前由其所有者激活的 AutomaticZenRule 时，此更改才会影响可观察到的行为。

OpenJDK API 变更

Android 15 continues the work of refreshing Android's core libraries to align with the features in the latest OpenJDK LTS releases.

Some of these changes can affect app compatibility for apps targeting Android 15 (API level 35):

• Changes to string formatting APIs: Validation of argument index, flags, width, and precision are now more strict when using the following String.format() and Formatter.format() APIs:

  • String.format(String, Object[])
  • String.format(Locale, String, Object[])
  • Formatter.format(String, Object[])
  • Formatter.format(Locale, String, Object[])

  For example, the following exception is thrown when an argument index of 0 is used (%0 in the format string):

  IllegalFormatArgumentIndexException: Illegal format argument index = 0
  

  In this case, the issue can be fixed by using an argument index of 1 (%1 in the format string).

• Changes to component type of Arrays.asList(...).toArray(): When using Arrays.asList(...).toArray(), the component type of the resulting array is now an Object—not the type of the underlying array's elements. So the following code throws a ClassCastException:

  String[] elements = (String[]) Arrays.asList("one", "two").toArray();
  

  For this case, to preserve String as the component type in the resulting array, you could use Collection.toArray(Object[]) instead:

  String[] elements = Arrays.asList("two", "one").toArray(new String[0]);
  

• Changes to language code handling: When using the Locale API, language codes for Hebrew, Yiddish, and Indonesian are no longer converted to their obsolete forms (Hebrew: iw, Yiddish: ji, and Indonesian: in). When specifying the language code for one of these locales, use the codes from ISO 639-1 instead (Hebrew: he, Yiddish: yi, and Indonesian: id).

• Changes to random int sequences: Following the changes made in https://bugs.openjdk.org/browse/JDK-8301574, the following Random.ints() methods now return a different sequence of numbers than the Random.nextInt() methods do:

  • Random.ints(long)
  • Random.ints(long, int, int)
  • Random.ints(int, int)
  • Random.ints()

  Generally, this change shouldn't result in app-breaking behavior, but your code shouldn't expect the sequence generated from Random.ints() methods to match Random.nextInt().

The new SequencedCollection API can affect your app's compatibility after you update compileSdk in your app's build configuration to use Android 15 (API level 35):

• Collision with MutableList.removeFirst() and MutableList.removeLast() extension functions in kotlin-stdlib

  The List type in Java is mapped to the MutableList type in Kotlin. Because the List.removeFirst() and List.removeLast() APIs have been introduced in Android 15 (API level 35), the Kotlin compiler resolves function calls, for example list.removeFirst(), statically to the new List APIs instead of to the extension functions in kotlin-stdlib.

  If an app is re-compiled with compileSdk set to 35 and minSdk set to 34 or lower, and then the app is run on Android 14 and lower, a runtime error is thrown:

  java.lang.NoSuchMethodError: No virtual method
  removeFirst()Ljava/lang/Object; in class Ljava/util/ArrayList;
  

  The existing NewApi lint option in Android Gradle Plugin can catch these new API usages.

  ./gradlew lint
  
  MainActivity.kt:41: Error: Call requires API level 35 (current min is 34): java.util.List#removeFirst [NewApi]
        list.removeFirst()
  

  To fix the runtime exception and lint errors, the removeFirst() and removeLast() function calls can be replaced with removeAt(0) and removeAt(list.lastIndex) respectively in Kotlin. If you're using Android Studio Ladybug | 2024.1.3 or higher, it also provides a quick fix option for these errors.

  Consider removing @SuppressLint("NewApi") and lintOptions { disable 'NewApi' } if the lint option has been disabled.

• Collision with other methods in Java

  New methods have been added into the existing types, for example, List and Deque. These new methods might not be compatible with the methods with the same name and argument types in other interfaces and classes. In the case of a method signature collision with incompatibility, the javac compiler outputs a build-time error. For example:

  Example error 1:

  javac MyList.java
  
  MyList.java:135: error: removeLast() in MyList cannot implement removeLast() in List
    public void removeLast() {
                ^
    return type void is not compatible with Object
    where E is a type-variable:
      E extends Object declared in interface List
  

  Example error 2:

  javac MyList.java
  
  MyList.java:7: error: types Deque<Object> and List<Object> are incompatible;
  public class MyList implements  List<Object>, Deque<Object> {
    both define reversed(), but with unrelated return types
  1 error
  

  Example error 3:

  javac MyList.java
  
  MyList.java:43: error: types List<E#1> and MyInterface<E#2> are incompatible;
  public static class MyList implements List<Object>, MyInterface<Object> {
    class MyList inherits unrelated defaults for getFirst() from types List and MyInterface
    where E#1,E#2 are type-variables:
      E#1 extends Object declared in interface List
      E#2 extends Object declared in interface MyInterface
  1 error
  

  To fix these build errors, the class implementing these interfaces should override the method with a compatible return type. For example:

  @Override
  public Object getFirst() {
      return List.super.getFirst();
  }
  

安全

Android 15 包含多项旨在提升系统安全性的变更，以帮助保护应用和用户免受恶意应用的侵害。

受限的 TLS 版本

Android 15 restricts the usage of TLS versions 1.0 and 1.1. These versions had previously been deprecated in Android, but are now disallowed for apps targeting Android 15.

限制后台 activity 启动

Android 15 可保护用户免受恶意应用的侵害，并让用户更好地控制 来防止恶意后台应用 将其他应用置于前台、提升其权限以及滥用 用户互动自以下时间以来，后台活动启动一直受到限制 Android 10（API 级别 29）。

其他变更

除了 UID 匹配限制之外，还包括以下其他更改：

• 默认情况下，将 PendingIntent 创建者更改为屏蔽后台活动启动。这有助于防止应用意外创建可能会被恶意操作者滥用的 PendingIntent。
• 除非 PendingIntent 发件人允许，否则请勿将应用调至前台。此变更旨在防止恶意应用滥用 在后台启动 activity 的功能。默认情况下，应用 允许将任务堆栈转到前台，除非创建者允许 后台活动启动权限或发送者有后台活动 启动权限
• 控制任务堆栈顶部 activity 如何完成其任务。如果顶部 activity 完成任务，Android 将返回上次处于活动状态的任务。此外，如果非顶层 activity 完成其任务，Android 将 返回主屏幕；它不会挡住这个非顶层的 活动。
• 防止将其他应用中的任意 activity 启动到您自己的 activity 任务。这项变更可防止恶意应用通过创建看似来自其他应用的 activity 来钓鱼式攻击用户。
• 阻止系统考虑非可见窗口来启动后台 activity。这有助于防止恶意应用滥用后台 activity 启动来向用户显示不需要或恶意的内容。

更安全的 intent

Android 15 introduces new optional security measures to make intents safer and more robust. These changes are aimed at preventing potential vulnerabilities and misuse of intents that can be exploited by malicious apps. There are two main improvements to the security of intents in Android 15:

• Match target intent-filters: Intents that target specific components must accurately match the target's intent-filter specifications. If you send an intent to launch another app's activity, the target intent component needs to align with the receiving activity's declared intent-filters.
• Intents must have actions: Intents without an action will no longer match any intent-filters. This means that intents used to start activities or services must have a clearly defined action.

Important: A PendingIntent acts as a wrapper for a standard Intent, so these security measures apply to the Intent contained within the PendingIntent.

In order to check how your app responds to these changes, use StrictMode in your app. To see detailed logs about Intent usage violations, add the following method:

Kotlin

fun onCreate() {
    StrictMode.setVmPolicy(VmPolicy.Builder()
        .detectUnsafeIntentLaunch()
        .build()
    )
}

Java

public void onCreate() {
    StrictMode.setVmPolicy(new VmPolicy.Builder()
            .detectUnsafeIntentLaunch()
            .build());
}

用户体验和系统界面

Android 15 包含一些旨在打造更一致、更直观的用户体验的变更。

窗口边衬区变更

There are two changes related to window insets in Android 15: edge-to-edge is enforced by default, and there are also configuration changes, such as the default configuration of system bars.

Edge-to-edge enforcement

Apps are edge-to-edge by default on devices running Android 15 if the app is targeting Android 15 (API level 35).

Important: If your app is not already edge-to-edge, portions of your app may be obscured and you must handle insets. Depending on the app, this work may or may not be significant. The Material 3 Scaffold component can reduce the work required to be compatible with the Android 15 edge-to-edge enforcement.

An app that targets Android 14 and is not edge-to-edge on an Android 15 device.

An app that targets Android 15 (API level 35) and is edge-to-edge on an Android 15 device. This app mostly uses Material 3 Compose Components that automatically apply insets. This screen is not negatively impacted by the Android 15 edge-to-edge enforcement.

This is a breaking change that might negatively impact your app's UI. The changes affect the following UI areas:

• Gesture handle navigation bar
  • Transparent by default.
  • Bottom offset is disabled so content draws behind the system navigation bar unless insets are applied.
  • setNavigationBarColor and R.attr#navigationBarColor are deprecated and don't affect gesture navigation.
  • setNavigationBarContrastEnforced and R.attr#navigationBarContrastEnforced continue to have no effect on gesture navigation.
• 3-button navigation
  • Opacity set to 80% by default, with color possibly matching the window background.
  • Bottom offset disabled so content draws behind the system navigation bar unless insets are applied.
  • setNavigationBarColor and R.attr#navigationBarColor are set to match the window background by default. The window background must be a color drawable for this default to apply. This API is deprecated but continues to affect 3-button navigation.
  • setNavigationBarContrastEnforced and R.attr#navigationBarContrastEnforced is true by default, which adds an 80% opaque background across 3-button navigation.
• Status bar
  • Transparent by default.
  • The top offset is disabled so content draws behind the status bar unless insets are applied.
  • setStatusBarColor and R.attr#statusBarColor are deprecated and have no effect on Android 15.
  • setStatusBarContrastEnforced and R.attr#statusBarContrastEnforced are deprecated but still have an effect on Android 15.
• Display cutout
  • layoutInDisplayCutoutMode of non-floating windows must be LAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS. SHORT_EDGES, NEVER, and DEFAULT are interpreted as ALWAYS so that users don't see a black bar caused by the display cutout and appear edge-to-edge.

The following example shows an app before and after targeting Android 15 (API level 35), and before and after applying insets. This example is not comprehensive, this might appear differently on Android Auto.

An app that targets Android 14 and is not edge-to-edge on an Android 15 device.

An app that targets Android 15 (API level 35) and is edge-to-edge on an Android 15 device. However, many elements are now hidden by the status bar, 3-button navigation bar, or display cutout due to the Android 15 edge-to-edge enforcements. Hidden UI includes the Material 2 top app bar, floating action buttons, and list items.

An app that targets Android 15 (API level 35), is edge to edge on an Android 15 device and applies insets so that UI is not hidden.

What to check if your app is already edge-to-edge

If your app is already edge-to-edge and applies insets, you are mostly unimpacted, except in the following scenarios. However, even if you think you aren't impacted, we recommend you test your app.

• You have a non-floating window, such as an Activity that uses SHORT_EDGES, NEVER or DEFAULT instead of LAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS. If your app crashes on launch, this might be due to your splashscreen. You can either upgrade the core splashscreen dependency to 1.2.0-alpha01 or later or set window.attributes.layoutInDisplayCutoutMode = WindowManager.LayoutInDisplayCutoutMode.always.
• There might be lower-traffic screens with occluded UI. Verify these less-visited screens don't have occluded UI. Lower-traffic screens include:
  • Onboarding or sign-in screens
  • Settings pages

What to check if your app is not already edge-to-edge

If your app is not already edge-to-edge, you are most likely impacted. In addition to the scenarios for apps that are already edge-to-edge, you should consider the following:

• If your app uses Material 3 Components ( androidx.compose.material3) in compose, such as TopAppBar, BottomAppBar, and NavigationBar, these components are likely not impacted because they automatically handle insets.
• If your app is using Material 2 Components ( androidx.compose.material) in Compose, these components don't automatically handle insets. However, you can get access to the insets and apply them manually. In androidx.compose.material 1.6.0 and later, use the windowInsets parameter to apply the insets manually for BottomAppBar, TopAppBar, BottomNavigation, and NavigationRail. Likewise, use the contentWindowInsets parameter for Scaffold.
• If your app uses views and Material Components (com.google.android.material), most views-based Material Components such as BottomNavigationView, BottomAppBar, NavigationRailView, or NavigationView, handle insets and require no additional work. However, you need to add android:fitsSystemWindows="true" if using AppBarLayout.
• For custom composables, apply the insets manually as padding. If your content is within a Scaffold, you can consume insets using the Scaffold padding values. Otherwise, apply padding using one of the WindowInsets.
• If your app is using views and BottomSheet, SideSheet or custom containers, apply padding using ViewCompat.setOnApplyWindowInsetsListener. For RecyclerView, apply padding using this listener and also add clipToPadding="false".

What to check if your app must offer custom background protection

If your app must offer custom background protection to 3-button navigation or the status bar, your app should place a composable or view behind the system bar using WindowInsets.Type#tappableElement() to get the 3-button navigation bar height or WindowInsets.Type#statusBars.

Additional edge-to-edge resources

See the Edge to Edge Views and Edge to Edge Compose guides for additional considerations on applying insets.

Deprecated APIs

The following APIs are deprecated but not disabled:

• R.attr#enforceStatusBarContrast
• R.attr#navigationBarColor (for 3 button navigation, with 80% alpha)
• Window#isStatusBarContrastEnforced
• Window#setNavigationBarColor (for 3 button navigation, with 80% alpha)
• Window#setStatusBarContrastEnforced

The following APIs are deprecated and disabled:

• R.attr#navigationBarColor (for gesture navigation)
• R.attr#navigationBarDividerColor
• R.attr#statusBarColor
• Window#setDecorFitsSystemWindows
• Window#getNavigationBarColor
• Window#getNavigationBarDividerColor
• Window#getStatusBarColor
• Window#setNavigationBarColor (for gesture navigation)
• Window#setNavigationBarDividerColor
• Window#setStatusBarColor

Stable configuration

如果您的应用以 Android 15（API 级别 35）或更高版本为目标平台，Configuration 不再排除系统栏。如果您在 Configuration 类中使用屏幕尺寸进行布局计算，则应根据需要将其替换为更好的替代方案，例如适当的 ViewGroup、WindowInsets 或 WindowMetricsCalculator。

Configuration 自 API 1 起便已开始提供。它通常从 Activity.onConfigurationChanged 中获取。它提供窗口密度、方向和大小等信息。从 Configuration 返回的窗口大小的一个重要特征是，它之前排除了系统栏。

配置大小通常用于资源选择，例如 /res/layout-h500dp，这仍然是一个有效的使用情形。不过，我们一直不建议使用它进行布局计算。如果您正在这样做，请立即远离该设备。您应根据自己的使用场景，将 Configuration 的使用替换为更合适的用法。

如果您使用它来计算布局，请使用适当的 ViewGroup，例如 CoordinatorLayout 或 ConstraintLayout。如果您使用它来确定系统导航栏的高度，请使用 WindowInsets。如果您想知道应用窗口的当前大小，请使用 computeCurrentWindowMetrics。

以下列表介绍了受此变更影响的字段：

• Configuration.screenWidthDp 和 screenHeightDp 尺寸不再排除系统栏。
• Configuration.smallestScreenWidthDp 会受到 screenWidthDp 和 screenHeightDp 更改的间接影响。
• Configuration.orientation 会受到近乎正方形的设备上 screenWidthDp 和 screenHeightDp 更改的间接影响。
• Display.getSize(Point) 间接受到 Configuration 中的更改影响。此方法已从 API 级别 30 开始弃用。
• 自 API 级别 33 以来，Display.getMetrics() 一直以这种方式运行。

elegantTextHeight 属性默认值为 true

For apps targeting Android 15 (API level 35), the elegantTextHeight TextView attribute becomes true by default, replacing the compact font used by default with some scripts that have large vertical metrics with one that is much more readable. The compact font was introduced to prevent breaking layouts; Android 13 (API level 33) prevents many of these breakages by allowing the text layout to stretch the vertical height utilizing the fallbackLineSpacing attribute.

In Android 15, the compact font still remains in the system, so your app can set elegantTextHeight to false to get the same behavior as before, but it is unlikely to be supported in upcoming releases. So, if your app supports the following scripts: Arabic, Lao, Myanmar, Tamil, Gujarati, Kannada, Malayalam, Odia, Telugu or Thai, test your app by setting elegantTextHeight to true.

elegantTextHeight behavior for apps targeting Android 14 (API level 34) and lower.

elegantTextHeight behavior for apps targeting Android 15.

TextView 宽度因复杂的字母形状而发生变化

In previous versions of Android, some cursive fonts or languages that have complex shaping might draw the letters in the previous or next character's area. In some cases, such letters were clipped at the beginning or ending position. Starting in Android 15, a TextView allocates width for drawing enough space for such letters and allows apps to request extra paddings to the left to prevent clipping.

Because this change affects how a TextView decides the width, TextView allocates more width by default if the app targets Android 15 (API level 35) or higher. You can enable or disable this behavior by calling the setUseBoundsForWidth API on TextView.

Because adding left padding might cause a misalignment for existing layouts, the padding is not added by default even for apps that target Android 15 or higher. However, you can add extra padding to preventing clipping by calling setShiftDrawingOffsetForStartOverhang.

The following examples show how these changes can improve text layout for some fonts and languages.

Standard layout for English text in a cursive font. Some of the letters are clipped. Here is the corresponding XML:

<TextView
    android:fontFamily="cursive"
    android:text="java" />

Layout for the same English text with additional width and padding. Here is the corresponding XML:

<TextView
    android:fontFamily="cursive"
    android:text="java"
    android:useBoundsForWidth="true"
    android:shiftDrawingOffsetForStartOverhang="true" />

Standard layout for Thai text. Some of the letters are clipped. Here is the corresponding XML:

<TextView
    android:text="คอมพิวเตอร์" />

Layout for the same Thai text with additional width and padding. Here is the corresponding XML:

<TextView
    android:text="คอมพิวเตอร์"
    android:useBoundsForWidth="true"
    android:shiftDrawingOffsetForStartOverhang="true" />

EditText 的语言区域感知默认行高

在较低版本的 Android 中，文本布局会拉伸文本的高度，以满足与当前语言区域匹配的字体的行高。例如，如果内容是日语，由于日语字体的行高略高于拉丁字体，因此文本的高度会略高。不过，尽管行高存在这些差异，但无论使用的是哪种语言区域，EditText 元素的大小都是统一的，如下图所示：

三个框，表示可以包含英语 (en)、日语 (ja) 和缅甸语 (my) 文本的 EditText 元素。EditText 的高度相同，即使这些语言的行高各不相同。

对于以 Android 15（API 级别 35）为目标平台的应用，现在为 EditText 预留了最小行高，以匹配指定语言区域的参考字体，如下图所示：

三个框，表示可以包含英语 (en)、日语 (ja) 和缅甸语 (my) 文本的 EditText 元素。EditText 的高度现在包含足够的空间来容纳这些语言字体的默认行高。

如有需要，您的应用可以将 useLocalePreferredLineHeightForMinimum 属性指定为 false，以恢复之前的行为；您的应用还可以在 Kotlin 和 Java 中使用 setMinimumFontMetrics API 设置自定义最小垂直指标。

摄像头和媒体

Android 15 对以 Android 15 或更高版本为目标平台的应用的相机和媒体行为做出了以下更改。

有关请求音频焦点的限制

以 Android 15（API 级别 35）为目标平台的应用必须是顶部应用或正在运行前台服务，才能请求音频焦点。如果应用在未满足上述任一要求的情况下尝试请求焦点，调用将返回 AUDIOFOCUS_REQUEST_FAILED。

如需详细了解音频焦点，请参阅管理音频焦点。

更新后的非 SDK 限制

Android 15 includes updated lists of restricted non-SDK interfaces based on collaboration with Android developers and the latest internal testing. Whenever possible, we make sure that public alternatives are available before we restrict non-SDK interfaces.

If your app does not target Android 15, some of these changes might not immediately affect you. However, while it's possible for your app to access some non-SDK interfaces depending on your app's target API level, using any non-SDK method or field always carries a high risk of breaking your app.

If you are unsure if your app uses non-SDK interfaces, you can test your app to find out. If your app relies on non-SDK interfaces, you should begin planning a migration to SDK alternatives. Nevertheless, we understand that some apps have valid use cases for using non-SDK interfaces. If you can't find an alternative to using a non-SDK interface for a feature in your app, you should request a new public API.

如需详细了解此 Android 版本中的变更，请参阅 Android 15 中有关限制非 SDK 接口的更新。如需全面了解有关非 SDK 接口的详细信息，请参阅对非 SDK 接口的限制。