動作の変更点: Android 15 以上をターゲットとするアプリ

以前のリリースと同様に、Android 15 には、アプリに影響を与える可能性のある動作変更が含まれています。下記の動作変更は、Android 15 以上をターゲットとするアプリに限り適用されます。アプリが Android 15 以上をターゲットとする場合は、必要に応じてアプリを変更し、下記の動作に適切に対応できるようにしてください。

アプリの targetSdkVersion に関係なく、Android 15 で実行されるすべてのアプリに影響する動作変更のリストも必ずご確認ください。

コア機能

Android 15 では、Android システムのさまざまなコア機能を変更または拡張しています。

フォアグラウンド サービスの変更

我们将对 Android 15 中的前台服务进行以下更改。

• 数据同步前台服务超时行为
• 新的媒体处理前台服务类型
• 对启动前台服务的 BOOT_COMPLETED 广播接收器的限制
• 在应用拥有 SYSTEM_ALERT_WINDOW 权限时启动前台服务的限制

数据同步前台服务超时行为

Android 15 introduces a new timeout behavior to dataSync for apps targeting Android 15 (API level 35) or higher. This behavior also applies to the new mediaProcessing foreground service type.

The system permits an app's dataSync services to run for a total of 6 hours in a 24-hour period, after which the system calls the running service's Service.onTimeout(int, int) method (introduced in Android 15). At this time, the service has a few seconds to call Service.stopSelf(). When Service.onTimeout() is called, the service is no longer considered a foreground service. If the service does not call Service.stopSelf(), the system throws an internal exception. The exception is logged in Logcat with the following message:

Fatal Exception: android.app.RemoteServiceException: "A foreground service of
type dataSync did not stop within its timeout: [component name]"

Note: The 6-hour time limit is shared by all of an app's dataSync foreground services. For example, if an app runs a dataSync service for four hours, then starts a different dataSync service, that second service will only be allowed to run for two hours. However, if the user brings the app to the foreground, the timer resets and the app has 6 hours available.

To avoid problems with this behavior change, you can do one or more of the following:

1. Have your service implement the new Service.onTimeout(int, int) method. When your app receives the callback, make sure to call stopSelf() within a few seconds. (If you don't stop the app right away, the system generates a failure.)
2. Make sure your app's dataSync services don't run for more than a total of 6 hours in any 24-hour period (unless the user interacts with the app, resetting the timer).
3. Only start dataSync foreground services as a result of direct user interaction; since your app is in the foreground when the service starts, your service has the full six hours after the app goes to the background.
4. Instead of using a dataSync foreground service, use an alternative API.

If your app's dataSync foreground services have run for 6 hours in the last 24, you cannot start another dataSync foreground service unless the user has brought your app to the foreground (which resets the timer). If you try to start another dataSync foreground service, the system throws ForegroundServiceStartNotAllowedException with an error message like "Time limit already exhausted for foreground service type dataSync".

Testing

To test your app's behavior, you can enable data sync timeouts even if your app is not targeting Android 15 (as long as the app is running on an Android 15 device). To enable timeouts, run the following adb command:

adb shell am compat enable FGS_INTRODUCE_TIME_LIMITS your-package-name

You can also adjust the timeout period, to make it easier to test how your app behaves when the limit is reached. To set a new timeout period, run the following adb command:

adb shell device_config put activity_manager data_sync_fgs_timeout_duration duration-in-milliseconds

新的媒体处理前台服务类型

Android 15 引入了一种新的前台服务类型 mediaProcessing。此服务类型适用于转码媒体文件等操作。例如，媒体应用可能会下载音频文件，并需要先将其转换为其他格式，然后才能播放。您可以使用 mediaProcessing 前台服务，确保即使应用在后台运行时转换也会继续。

系统允许应用的 mediaProcessing 服务在 24 小时内总共运行 6 小时，之后系统会调用正在运行的服务的 Service.onTimeout(int, int) 方法（在 Android 15 中引入）。此时，服务有几秒钟的时间来调用 Service.stopSelf()。如果服务未调用 Service.stopSelf()，系统会抛出内部异常。系统会在 Logcat 中记录此异常，并显示以下消息：

Fatal Exception: android.app.RemoteServiceException: "A foreground service of
type mediaProcessing did not stop within its timeout: [component name]"

注意 ：6 小时的时间限制由应用的所有mediaProcessing前台服务共享。例如，如果应用运行 mediaProcessing 服务四小时，然后启动其他 mediaProcessing 服务，则第二个服务将只能运行两小时。不过，如果用户将应用调到前台，计时器会重置，并且应用将有 6 小时的可用时间。

为避免出现此异常，您可以执行以下任一操作：

1. 让您的服务实现新的 Service.onTimeout(int, int) 方法。当您的应用收到回调时，请务必在几秒钟内调用 stopSelf()。（如果您未立即停止应用，系统会生成失败情况。）
2. 确保应用的 mediaProcessing 服务在任何 24 小时内总运行时间不超过 6 小时（除非用户与应用互动，重置计时器）。
3. 仅在有直接用户互动时启动 mediaProcessing 前台服务；由于服务启动时应用位于前台，因此您的服务在应用进入后台后有完整的 6 小时时间。
4. 请改用 替代 API（例如 WorkManager），而不是使用 mediaProcessing 前台服务。

如果您的应用的 mediaProcessing 前台服务在过去 24 小时内运行了 6 小时，则您无法启动其他 mediaProcessing 前台服务，除非用户将您的应用切换到前台（这会重置计时器）。如果您尝试启动另一个 mediaProcessing 前台服务，系统会抛出 ForegroundServiceStartNotAllowedException，并显示类似于“前台服务类型 mediaProcessing 的时间限制已用尽”的错误消息。

如需详细了解 mediaProcessing 服务类型，请参阅 Android 15 前台服务类型变更：媒体处理。

测试

如需测试应用的行为，您可以启用媒体处理超时，即使您的应用并非以 Android 15 为目标平台也是如此（前提是应用在 Android 15 设备上运行）。如需启用超时，请运行以下 adb 命令：

adb shell am compat enable FGS_INTRODUCE_TIME_LIMITS your-package-name

您还可以调整超时期限，以便更轻松地测试应用在达到上限时的行为方式。如需设置新的超时期限，请运行以下 adb 命令：

adb shell device_config put activity_manager media_processing_fgs_timeout_duration duration-in-milliseconds

对启动前台服务的 BOOT_COMPLETED 广播接收器的限制

在启动 BOOT_COMPLETED 广播接收器方面存在新限制 前台服务。BOOT_COMPLETED 接收器不能启动 以下类型的前台服务：

• dataSync
• camera
• mediaPlayback
• phoneCall
• mediaProjection
• microphone（自 Android 14 起，microphone 就受到此限制）

如果 BOOT_COMPLETED 接收器尝试启动任何上述类型的前台 服务，系统会抛出 ForegroundServiceStartNotAllowedException。

测试

如需测试应用的行为，您可以启用这些新限制，即使您的应用并未以 Android 15 为目标平台（只要应用在 Android 15 设备上运行）也是如此。运行以下 adb 命令：

adb shell am compat enable FGS_BOOT_COMPLETED_RESTRICTIONS your-package-name

如需在不重启设备的情况下发送 BOOT_COMPLETED 广播，请运行以下 adb 命令：

adb shell am broadcast -a android.intent.action.BOOT_COMPLETED your-package-name

在应用拥有 SYSTEM_ALERT_WINDOW 权限时启动前台服务的限制

Previously, if an app held the SYSTEM_ALERT_WINDOW permission, it could launch a foreground service even if the app was currently in the background (as discussed in exemptions from background start restrictions).

If an app targets Android 15, this exemption is now narrower. The app now needs to have the SYSTEM_ALERT_WINDOW permission and also have a visible overlay window. That is, the app needs to first launch a TYPE_APPLICATION_OVERLAY window and the window needs to be visible before you start a foreground service.

If your app attempts to start a foreground service from the background without meeting these new requirements (and it does not have some other exemption), the system throws ForegroundServiceStartNotAllowedException.

If your app declares the SYSTEM_ALERT_WINDOW permission and launches foreground services from the background, it may be affected by this change. If your app gets a ForegroundServiceStartNotAllowedException, check your app's order of operations and make sure your app already has an active overlay window before it attempts to start a foreground service from the background. You can check if your overlay window is currently visible by calling View.getWindowVisibility(), or you can override View.onWindowVisibilityChanged() to get notified whenever the visibility changes.

Testing

To test your app's behavior, you can enable these new restrictions even if your app is not targeting Android 15 (as long as the app is running on an Android 15 device). To enable these new restrictions on starting foreground services from the background, run the following adb command:

adb shell am compat enable FGS_SAW_RESTRICTIONS your-package-name

アプリがサイレント モードのグローバル状態を変更できるタイミングの変更

Apps that target Android 15 (API level 35) and higher can no longer change the global state or policy of Do Not Disturb (DND) on a device (either by modifying user settings, or turning off DND mode). Instead, apps must contribute an AutomaticZenRule, which the system combines into a global policy with the existing most-restrictive-policy-wins scheme. Calls to existing APIs that previously affected global state (setInterruptionFilter, setNotificationPolicy) result in the creation or update of an implicit AutomaticZenRule, which is toggled on and off depending on the call-cycle of those API calls.

Note that this change only affects observable behavior if the app is calling setInterruptionFilter(INTERRUPTION_FILTER_ALL) and expects that call to deactivate an AutomaticZenRule that was previously activated by their owners.

OpenJDK API の変更

Android 15 continues the work of refreshing Android's core libraries to align with the features in the latest OpenJDK LTS releases.

Some of these changes can affect app compatibility for apps targeting Android 15 (API level 35):

• Changes to string formatting APIs: Validation of argument index, flags, width, and precision are now more strict when using the following String.format() and Formatter.format() APIs:

  • String.format(String, Object[])
  • String.format(Locale, String, Object[])
  • Formatter.format(String, Object[])
  • Formatter.format(Locale, String, Object[])

  For example, the following exception is thrown when an argument index of 0 is used (%0 in the format string):

  IllegalFormatArgumentIndexException: Illegal format argument index = 0
  

  In this case, the issue can be fixed by using an argument index of 1 (%1 in the format string).

• Changes to component type of Arrays.asList(...).toArray(): When using Arrays.asList(...).toArray(), the component type of the resulting array is now an Object—not the type of the underlying array's elements. So the following code throws a ClassCastException:

  String[] elements = (String[]) Arrays.asList("one", "two").toArray();
  

  For this case, to preserve String as the component type in the resulting array, you could use Collection.toArray(Object[]) instead:

  String[] elements = Arrays.asList("two", "one").toArray(new String[0]);
  

• Changes to language code handling: When using the Locale API, language codes for Hebrew, Yiddish, and Indonesian are no longer converted to their obsolete forms (Hebrew: iw, Yiddish: ji, and Indonesian: in). When specifying the language code for one of these locales, use the codes from ISO 639-1 instead (Hebrew: he, Yiddish: yi, and Indonesian: id).

• Changes to random int sequences: Following the changes made in https://bugs.openjdk.org/browse/JDK-8301574, the following Random.ints() methods now return a different sequence of numbers than the Random.nextInt() methods do:

  • Random.ints(long)
  • Random.ints(long, int, int)
  • Random.ints(int, int)
  • Random.ints()

  Generally, this change shouldn't result in app-breaking behavior, but your code shouldn't expect the sequence generated from Random.ints() methods to match Random.nextInt().

The new SequencedCollection API can affect your app's compatibility after you update compileSdk in your app's build configuration to use Android 15 (API level 35):

• Collision with MutableList.removeFirst() and MutableList.removeLast() extension functions in kotlin-stdlib

  The List type in Java is mapped to the MutableList type in Kotlin. Because the List.removeFirst() and List.removeLast() APIs have been introduced in Android 15 (API level 35), the Kotlin compiler resolves function calls, for example list.removeFirst(), statically to the new List APIs instead of to the extension functions in kotlin-stdlib.

  If an app is re-compiled with compileSdk set to 35 and minSdk set to 34 or lower, and then the app is run on Android 14 and lower, a runtime error is thrown:

  java.lang.NoSuchMethodError: No virtual method
  removeFirst()Ljava/lang/Object; in class Ljava/util/ArrayList;
  

  The existing NewApi lint option in Android Gradle Plugin can catch these new API usages.

  ./gradlew lint
  
  MainActivity.kt:41: Error: Call requires API level 35 (current min is 34): java.util.List#removeFirst [NewApi]
        list.removeFirst()
  

  To fix the runtime exception and lint errors, the removeFirst() and removeLast() function calls can be replaced with removeAt(0) and removeAt(list.lastIndex) respectively in Kotlin. If you're using Android Studio Ladybug | 2024.1.3 or higher, it also provides a quick fix option for these errors.

  Consider removing @SuppressLint("NewApi") and lintOptions { disable 'NewApi' } if the lint option has been disabled.

• Collision with other methods in Java

  New methods have been added into the existing types, for example, List and Deque. These new methods might not be compatible with the methods with the same name and argument types in other interfaces and classes. In the case of a method signature collision with incompatibility, the javac compiler outputs a build-time error. For example:

  Example error 1:

  javac MyList.java
  
  MyList.java:135: error: removeLast() in MyList cannot implement removeLast() in List
    public void removeLast() {
                ^
    return type void is not compatible with Object
    where E is a type-variable:
      E extends Object declared in interface List
  

  Example error 2:

  javac MyList.java
  
  MyList.java:7: error: types Deque<Object> and List<Object> are incompatible;
  public class MyList implements  List<Object>, Deque<Object> {
    both define reversed(), but with unrelated return types
  1 error
  

  Example error 3:

  javac MyList.java
  
  MyList.java:43: error: types List<E#1> and MyInterface<E#2> are incompatible;
  public static class MyList implements List<Object>, MyInterface<Object> {
    class MyList inherits unrelated defaults for getFirst() from types List and MyInterface
    where E#1,E#2 are type-variables:
      E#1 extends Object declared in interface List
      E#2 extends Object declared in interface MyInterface
  1 error
  

  To fix these build errors, the class implementing these interfaces should override the method with a compatible return type. For example:

  @Override
  public Object getFirst() {
      return List.super.getFirst();
  }
  

セキュリティ

Android 15 では、システムのセキュリティを強化し、悪意のあるアプリからアプリとユーザーを保護するための変更が加えられています。

制限付きの TLS バージョン

Android 15 restricts the usage of TLS versions 1.0 and 1.1. These versions had previously been deprecated in Android, but are now disallowed for apps targeting Android 15.

保護されたバックグラウンド アクティビティの起動

Android 15 では、悪意のあるアプリからユーザーを保護し、より細かく 悪意のあるバックグラウンド アプリが悪意のあるアクティビティを 他のアプリをフォアグラウンドで動作させる、権限昇格させる、アプリを悪用する です。バックグラウンド アクティビティの起動は、それ以降、 Android 10（API レベル 29）。

スタックの最上位の UID と一致しないアプリによるアクティビティの起動をブロックする

悪意のあるアプリは、同じタスク内で別のアプリのアクティビティを起動し、 そのアプリであるかのように見せかけます。この「タスク」は、 ハイジャック」現在のバックグラウンド起動の制限をバイパスできます。 同じ表示タスク内で発生します。このリスクを軽減するため、Android 15 では スタックの最上位の UID と一致しないアプリの起動をブロックするフラグ できます。アプリのすべてのアクティビティをオプトインするには、 allowCrossUidActivitySwitchFromBelow 属性を AndroidManifest.xml ファイル内で指定する必要があります。

<application android:allowCrossUidActivitySwitchFromBelow="false" >

次の条件がすべて満たされている場合、新しいセキュリティ対策は有効です。

• リリースを実行するアプリは Android 15 をターゲットとしています。
• タスクスタックの一番上にあるアプリは Android 15 をターゲットとしています。
• 表示されているアクティビティはすべて、新しい保護設定にオプトインしています。

セキュリティ対策が有効になっている場合、アプリは 最後に表示されたアプリ（ユーザーが自身のタスクを完了した場合）

その他の変更点

UID マッチングの制限以外にも、次のような変更があります。 含まれるもの:

• PendingIntent のクリエイターを変更してバックグラウンド アクティビティの起動をブロックするよう変更する デフォルトです。これにより、アプリが誤って IP アドレスを PendingIntent: 悪意のある人物によって悪用されるおそれがあります。
• PendingIntent の送信者がない限りアプリをフォアグラウンドに戻さない 許可します。この変更は、悪意のあるアプリによって バックグラウンドでアクティビティを開始する機能。デフォルトでは、アプリが クリエイターが許可しない限り、タスクスタックをフォアグラウンドに移すことができる バックグラウンド アクティビティの起動権限がある、または送信者にバックグラウンド アクティビティがある できます。
• タスクスタックのトップ アクティビティがタスクを終了する方法を制御する。もし 上位のアクティビティがタスクを終了すると、Android は 最後のアクティブな状態。さらに、トップ以外のアクティビティがそのタスクを完了すると、Android は ホーム画面に戻ります。このノントップ スレッドの できます。
• 他のアプリから自分のアクティビティに任意のアクティビティを起動できないようにする タスクです。この変更により、悪意のあるアプリがユーザーをフィッシング攻撃から 他のアプリからと思われるアクティビティ
• 非表示のウィンドウがバックグラウンド アクティビティの対象とみなされないようにブロックする 。これにより、悪意のあるアプリによるバックグラウンドの不正使用を防ぐことができます 望ましくないコンテンツや悪意のあるコンテンツをユーザーに表示する。

より安全なインテント

Android 15 引入了新的可选安全措施，以提高 intent 的安全性和稳健性。这些变更旨在防止潜在的漏洞以及恶意应用可能利用的 intent 滥用行为。Android 15 对 intent 的安全性进行了两项主要改进：

• 与目标 intent 过滤器匹配：定位到特定组件的 intent 必须与目标的 intent 过滤器规范完全匹配。如果您发送 intent 来启动其他应用的 activity，目标 intent 组件需要与接收 activity 声明的 intent 过滤器保持一致。
• intent 必须具有操作：没有操作的 intent 将不再与任何 intent 过滤器匹配。这意味着，用于启动 activity 或服务的 intent 必须具有明确定义的操作。

重要提示：PendingIntent 充当标准 Intent 的封装容器，因此这些安全措施适用于 PendingIntent 中包含的 Intent。

如需检查您的应用对这些更改的响应方式，请在应用中使用 StrictMode。如需查看有关 Intent 使用违规行为的详细日志，请添加以下方法：

Kotlin

fun onCreate() {
    StrictMode.setVmPolicy(VmPolicy.Builder()
        .detectUnsafeIntentLaunch()
        .build()
    )
}

Java

public void onCreate() {
    StrictMode.setVmPolicy(new VmPolicy.Builder()
            .detectUnsafeIntentLaunch()
            .build());
}

ユーザー エクスペリエンスとシステム UI

Android 15 には、より一貫性があり直感的なユーザー エクスペリエンスを実現するための変更がいくつか含まれています。

ウィンドウの切れ込みの変更

Android 15 では、ウィンドウの切り欠きに関連する 2 つの変更があります。エッジツーエッジがデフォルトで適用され、システムバーのデフォルト構成などの構成も変更されています。

全面实施政策

Apps are edge-to-edge by default on devices running Android 15 if the app is targeting Android 15 (API level 35).

Important: If your app is not already edge-to-edge, portions of your app may be obscured and you must handle insets. Depending on the app, this work may or may not be significant. The Material 3 Scaffold component can reduce the work required to be compatible with the Android 15 edge-to-edge enforcement.

An app that targets Android 14 and is not edge-to-edge on an Android 15 device.

An app that targets Android 15 (API level 35) and is edge-to-edge on an Android 15 device. This app mostly uses Material 3 Compose Components that automatically apply insets. This screen is not negatively impacted by the Android 15 edge-to-edge enforcement.

This is a breaking change that might negatively impact your app's UI. The changes affect the following UI areas:

• Gesture handle navigation bar
  • Transparent by default.
  • Bottom offset is disabled so content draws behind the system navigation bar unless insets are applied.
  • setNavigationBarColor and R.attr#navigationBarColor are deprecated and don't affect gesture navigation.
  • setNavigationBarContrastEnforced and R.attr#navigationBarContrastEnforced continue to have no effect on gesture navigation.
• 3-button navigation
  • Opacity set to 80% by default, with color possibly matching the window background.
  • Bottom offset disabled so content draws behind the system navigation bar unless insets are applied.
  • setNavigationBarColor and R.attr#navigationBarColor are set to match the window background by default. The window background must be a color drawable for this default to apply. This API is deprecated but continues to affect 3-button navigation.
  • setNavigationBarContrastEnforced and R.attr#navigationBarContrastEnforced is true by default, which adds an 80% opaque background across 3-button navigation.
• Status bar
  • Transparent by default.
  • The top offset is disabled so content draws behind the status bar unless insets are applied.
  • setStatusBarColor and R.attr#statusBarColor are deprecated and have no effect on Android 15.
  • setStatusBarContrastEnforced and R.attr#statusBarContrastEnforced are deprecated but still have an effect on Android 15.
• Display cutout
  • layoutInDisplayCutoutMode of non-floating windows must be LAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS. SHORT_EDGES, NEVER, and DEFAULT are interpreted as ALWAYS so that users don't see a black bar caused by the display cutout and appear edge-to-edge.

The following example shows an app before and after targeting Android 15 (API level 35), and before and after applying insets.

An app that targets Android 14 and is not edge-to-edge on an Android 15 device.

An app that targets Android 15 (API level 35) and is edge-to-edge on an Android 15 device. However, many elements are now hidden by the status bar, 3-button navigation bar, or display cutout due to the Android 15 edge-to-edge enforcements. Hidden UI includes the Material 2 top app bar, floating action buttons, and list items.

An app that targets Android 15 (API level 35), is edge to edge on an Android 15 device and applies insets so that UI is not hidden.

What to check if your app is already edge-to-edge

If your app is already edge-to-edge and applies insets, you are mostly unimpacted, except in the following scenarios. However, even if you think you aren't impacted, we recommend you test your app.

• You have a non-floating window, such as an Activity that uses SHORT_EDGES, NEVER or DEFAULT instead of LAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS. If your app crashes on launch, this might be due to your splashscreen. You can either upgrade the core splashscreen dependency to 1.2.0-alpha01 or later or set window.attributes.layoutInDisplayCutoutMode = WindowManager.LayoutInDisplayCutoutMode.always.
• There might be lower-traffic screens with occluded UI. Verify these less-visited screens don't have occluded UI. Lower-traffic screens include:
  • Onboarding or sign-in screens
  • Settings pages

What to check if your app is not already edge-to-edge

If your app is not already edge-to-edge, you are most likely impacted. In addition to the scenarios for apps that are already edge-to-edge, you should consider the following:

• If your app uses Material 3 Components ( androidx.compose.material3) in compose, such as TopAppBar, BottomAppBar, and NavigationBar, these components are likely not impacted because they automatically handle insets.
• If your app is using Material 2 Components ( androidx.compose.material) in Compose, these components don't automatically handle insets. However, you can get access to the insets and apply them manually. In androidx.compose.material 1.6.0 and later, use the windowInsets parameter to apply the insets manually for BottomAppBar, TopAppBar, BottomNavigation, and NavigationRail. Likewise, use the contentWindowInsets parameter for Scaffold.
• If your app uses views and Material Components (com.google.android.material), most views-based Material Components such as BottomNavigationView, BottomAppBar, NavigationRailView, or NavigationView, handle insets and require no additional work. However, you need to add android:fitsSystemWindows="true" if using AppBarLayout.
• For custom composables, apply the insets manually as padding. If your content is within a Scaffold, you can consume insets using the Scaffold padding values. Otherwise, apply padding using one of the WindowInsets.
• If your app is using views and BottomSheet, SideSheet or custom containers, apply padding using ViewCompat.setOnApplyWindowInsetsListener. For RecyclerView, apply padding using this listener and also add clipToPadding="false".

What to check if your app must offer custom background protection

If your app must offer custom background protection to 3-button navigation or the status bar, your app should place a composable or view behind the system bar using WindowInsets.Type#tappableElement() to get the 3-button navigation bar height or WindowInsets.Type#statusBars.

Additional edge-to-edge resources

See the Edge to Edge Views and Edge to Edge Compose guides for additional considerations on applying insets.

Deprecated APIs

The following APIs are deprecated but not disabled:

• R.attr#enforceStatusBarContrast
• R.attr#navigationBarColor (for 3 button navigation, with 80% alpha)
• Window#isStatusBarContrastEnforced
• Window#setNavigationBarColor (for 3 button navigation, with 80% alpha)
• Window#setStatusBarContrastEnforced

The following APIs are deprecated and disabled:

• R.attr#navigationBarColor (for gesture navigation)
• R.attr#navigationBarDividerColor
• R.attr#statusBarColor
• Window#setDecorFitsSystemWindows
• Window#getNavigationBarColor
• Window#getNavigationBarDividerColor
• Window#getStatusBarColor
• Window#setNavigationBarColor (for gesture navigation)
• Window#setNavigationBarDividerColor
• Window#setStatusBarColor

稳定配置

如果您的应用以 Android 15（API 级别 35）或更高版本为目标平台，Configuration 不再排除系统栏。如果您使用 Configuration 类中的屏幕尺寸进行布局计算，则应根据需要将其替换为更好的替代方案，例如适当的 ViewGroup、WindowInsets 或 WindowMetricsCalculator。

Configuration 从 API 1 开始提供。它通常从 Activity.onConfigurationChanged 中获取。它提供窗口密度、屏幕方向和尺寸等信息。从 Configuration 返回的窗口大小的一个重要特征是，它之前会排除系统栏。

配置大小通常用于资源选择（例如 /res/layout-h500dp），这仍然是一个有效的用例。不过，我们一直不建议将其用于布局计算。如果您正在这样做，请立即停止。您应根据自己的用例，将 Configuration 的使用替换为更合适的用法。

如果您使用它来计算布局，请使用适当的 ViewGroup，例如 CoordinatorLayout 或 ConstraintLayout。如果您使用它来确定系统侧边栏的高度，请使用 WindowInsets。如果您想知道应用窗口的当前大小，请使用 computeCurrentWindowMetrics。

以下列表介绍了受此变更影响的字段：

• Configuration.screenWidthDp 和 screenHeightDp 尺寸不再排除系统栏。
• Configuration.smallestScreenWidthDp 会间接受到对 screenWidthDp 和 screenHeightDp 的更改的影响。
• 在接近方形的设备上，Configuration.orientation 会间接受到对 screenWidthDp 和 screenHeightDp 所做的更改的影响。
• Display.getSize(Point) 会间接受到 Configuration 中的更改影响。从 API 级别 30 开始，此方法已被弃用。
• 从 API 级别 33 开始，Display.getMetrics() 就已经这样运作了。

elegantTextHeight 属性のデフォルトは true

对于以 Android 15（API 级别 35）为目标平台的应用，elegantTextHeight TextView 属性默认会变为 true，将默认使用的紧凑字体替换为一些具有较大垂直测量的脚本，使其更易于阅读。紧凑字体旨在防止布局中断；Android 13（API 级别 33）允许文本布局利用 fallbackLineSpacing 属性拉伸垂直高度，从而防止许多此类中断。

在 Android 15 中，系统中仍保留了紧凑字体，因此您的应用可以将 elegantTextHeight 设置为 false 以获得与之前相同的行为，但即将发布的版本不太可能支持此字体。因此，如果您的应用支持以下脚本：阿拉伯语、老挝语、缅甸语、泰米尔语、古吉拉特语、卡纳达语、马拉雅拉姆语、奥里亚语、泰卢固语或泰语，请将 elegantTextHeight 设置为 true 以测试您的应用。

针对以 Android 14（API 级别 34）及更低版本为目标平台的应用的 elegantTextHeight 行为。

以 Android 15 为目标平台的应用的 elegantTextHeight 行为。

複雑な文字の形状で TextView の幅が変更される

在以前的 Android 版本中，某些具有复杂形状的手写字体或语言可能会在上一个或下一个字符的区域绘制字母。在某些情况下，此类字母会在开头或结尾处被剪裁。从 Android 15 开始，TextView 会分配宽度，以便为此类字母绘制足够的空间，并允许应用请求向左额外添加内边距以防止剪裁。

由于此更改会影响 TextView 确定宽度的方式，因此如果应用以 Android 15（API 级别 35）或更高版本为目标平台，TextView 会默认分配更多宽度。您可以通过对 TextView 调用 setUseBoundsForWidth API 来启用或停用此行为。

由于添加左内边距可能会导致现有布局未对齐，因此默认情况下不会添加内边距，即使以 Android 15 或更高版本为目标平台的应用也是如此。不过，您可以通过调用 setShiftDrawingOffsetForStartOverhang 添加额外的内边距以防止剪裁。

以下示例展示了这些更改如何改进某些字体和语言的文本布局。

采用手写体字体的英语文本的标准布局。部分字母被截断。对应的 XML 如下：

<TextView
    android:fontFamily="cursive"
    android:text="java" />

相同英语文本的布局，增加了宽度和内边距。以下是相应的 XML：

<TextView
    android:fontFamily="cursive"
    android:text="java"
    android:useBoundsForWidth="true"
    android:shiftDrawingOffsetForStartOverhang="true" />

泰语文本的标准布局。部分字母被截断。 以下是相应的 XML：

<TextView
    android:text="คอมพิวเตอร์" />

相同泰语文本的布局，增加了宽度和内边距。以下是相应的 XML：

<TextView
    android:text="คอมพิวเตอร์"
    android:useBoundsForWidth="true"
    android:shiftDrawingOffsetForStartOverhang="true" />

言語 / 地域に応じた EditText のデフォルトの行の高さ

In previous versions of Android, the text layout stretched the height of the text to meet the line height of the font that matched the current locale. For example, if the content was in Japanese, because the line height of the Japanese font is slightly larger than the one of a Latin font, the height of the text became slightly larger. However, despite these differences in line heights, the EditText element was sized uniformly, regardless of the locale being used, as illustrated in the following image:

Three boxes representing EditText elements that can contain text from English (en), Japanese (ja), and Burmese (my). The height of the EditText is the same, even though these languages have different line heights from each other.

For apps targeting Android 15 (API level 35), a minimum line height is now reserved for EditText to match the reference font for the specified Locale, as shown in the following image:

Three boxes representing EditText elements that can contain text from English (en), Japanese (ja), and Burmese (my). The height of the EditText now includes space to accommodate the default line height for these languages' fonts.

If needed, your app can restore the previous behavior by specifying the useLocalePreferredLineHeightForMinimum attribute to false, and your app can set custom minimum vertical metrics using the setMinimumFontMetrics API in Kotlin and Java.

カメラとメディア

Android 15 では、Android 15 以降をターゲットとするアプリのカメラとメディアの動作が次のように変更されます。

音声フォーカスのリクエストに関する制限

以 Android 15（API 级别 35）为目标平台的应用必须是顶部应用或正在运行前台服务，才能请求音频焦点。如果应用在未满足上述任一要求的情况下尝试请求焦点，调用将返回 AUDIOFOCUS_REQUEST_FAILED。

如需详细了解音频焦点，请参阅管理音频焦点。

非 SDK の制限の更新

Android 15 包含更新后的受限非 SDK 接口列表（基于与 Android 开发者之间的协作以及最新的内部测试）。在限制使用非 SDK 接口之前，我们会尽可能确保有可用的公开替代方案。

如果您的应用并非以 Android 15 为目标平台，其中一些变更可能不会立即对您产生影响。不过，虽然您的应用可以访问一些非 SDK 接口（具体取决于应用的目标 API 级别），但如果您使用任何非 SDK 方法或字段，应用无法运行的风险始终会很高。

如果您不确定自己的应用是否使用了非 SDK 接口，则可以测试该应用，进行确认。如果您的应用依赖于非 SDK 接口，您应该开始计划迁移到 SDK 替代方案。不过，我们知道某些应用具有使用非 SDK 接口的有效用例。如果您无法为应用中的某项功能找到使用非 SDK 接口的替代方案，则应请求新的公共 API。

To learn more about the changes in this release of Android, see Updates to non-SDK interface restrictions in Android 15. To learn more about non-SDK interfaces generally, see Restrictions on non-SDK interfaces.