行为变更：以 Android 14 或更高版本为目标平台的应用

与以前的版本一样，Android 14 包含一些行为变更，这些变更可能会影响您的应用。以下行为变更仅影响以 Android 14（API 级别 34）或更高版本为目标平台的应用。如果您的应用以 Android 14 或更高版本为目标平台，您应该修改自己的应用以适当地支持这些行为（如果适用）。

此外，请务必查看对 Android 14 上运行的所有应用都有影响的行为变更列表（无论应用的 targetSdkVersion 如何）。

核心功能

前台服务类型是必需的

If your app targets Android 14 (API level 34) or higher, it must specify at least one foreground service type for each foreground service within your app. You should choose a foreground service type that represents your app's use case. The system expects foreground services that have a particular type to satisfy a particular use case.

Note: Android 14 introduces foreground service types for health and remote messaging use cases. The system also reserves new types for short services, special use cases, and system exemptions.

If a use case in your app isn't associated with any of these types, it's strongly recommended that you migrate your logic to use WorkManager or user-initiated data transfer jobs.

在 BluetoothAdapter 中强制执行 BLUETOOTH_CONNECT 权限

对于以 Android 14（API 级别 34）或更高版本为目标平台的应用，Android 14 会在调用 BluetoothAdapter getProfileConnectionState() 方法时强制执行 BLUETOOTH_CONNECT 权限。

此方法已需要 BLUETOOTH_CONNECT 权限，但未被强制执行。请确保您的应用在应用的 AndroidManifest.xml 文件中声明 BLUETOOTH_CONNECT（如以下代码段所示），并在调用 getProfileConnectionState 之前检查用户是否已授予权限。

<uses-permission android:name="android.permission.BLUETOOTH_CONNECT" />

OpenJDK 17 更新

Android 14 将继续更新 Android 的核心库，以与最新 OpenJDK LTS 版本中的功能保持一致，包括适合应用和平台开发者的库更新和 Java 17 语言支持。

以下变更可能会影响应用兼容性：

• 对正则表达式的更改：现在，为了更严格地遵循 OpenJDK 的语义，不允许无效的组引用。您可能会看到 java.util.regex.Matcher 类抛出 IllegalArgumentException 的新情况，因此请务必测试应用中使用正则表达式的情形。如需在测试期间启用或停用此变更，请使用兼容性框架工具切换 DISALLOW_INVALID_GROUP_REFERENCE 标志。
• UUID 处理：现在，验证输入参数时，java.util.UUID.fromString() 方法会执行更严格的检查，因此您可能会在反序列化期间看到 IllegalArgumentException。如需在测试期间启用或停用此变更，请使用兼容性框架工具切换 ENABLE_STRICT_VALIDATION 标志。
• ProGuard 问题：有时，在您尝试使用 ProGuard 缩减、混淆和优化应用时，添加 java.lang.ClassValue 类会导致问题。问题源自 Kotlin 库，该库会根据 Class.forName("java.lang.ClassValue") 是否会返回类更改运行时行为。如果您的应用是根据没有 java.lang.ClassValue 类的旧版运行时开发的，则这些优化可能会将 computeValue 方法从派生自 java.lang.ClassValue 的类中移除。

JobScheduler 增强回调和网络行为

自引入以来，JobScheduler 会预期您的应用在几秒内从 onStartJob 或 onStopJob 返回。在 Android 14 之前，如果作业运行时间太长，则会静默停止并失败。如果您的应用以 Android 14（API 级别 34）或更高版本为目标平台且在主线程上超出了授权的时间，应用会触发 ANR，并显示错误消息“对 onStartJob 没有响应”或“对 onStopJob 没有响应”。请考虑迁移到 WorkManager，该版本可支持异步处理，或将所有繁重工作迁移到后台线程。

JobScheduler 还引入了，如果使用 setRequiredNetworkType 或 setRequiredNetwork 约束条件，则需要声明 ACCESS_NETWORK_STATE 权限。如果应用在调度作业时未声明 ACCESS_NETWORK_STATE 权限，并且以 Android 14 或更高版本为目标平台，则会导致 SecurityException。

Tiles 发布 API

对于以 14 及更高版本为目标平台的应用，TileService#startActivityAndCollapse(Intent) 已废弃，现在会在调用时抛出异常。如果您的应用从功能块启动 activity，请改用 TileService#startActivityAndCollapse(PendingIntent)。

隐私权

拥有对照片和视频的部分访问权限

Android 14 introduces Selected Photos Access, which allows users to grant apps access to specific images and videos in their library, rather than granting access to all media of a given type.

This change is only enabled if your app targets Android 14 (API level 34) or higher. If you don't use the photo picker yet, we recommend implementing it in your app to provide a consistent experience for selecting images and videos that also enhances user privacy without having to request any storage permissions.

If you maintain your own gallery picker using storage permissions and need to maintain full control over your implementation, adapt your implementation to use the new READ_MEDIA_VISUAL_USER_SELECTED permission. If your app doesn't use the new permission, the system runs your app in a compatibility mode.

用户体验

安全的全屏 intent 通知

在 Android 11（API 级别 30）中，任何应用都可以在手机处于锁定状态时使用 Notification.Builder.setFullScreenIntent 发送全屏 intent。您可以通过在 AndroidManifest 中声明 USE_FULL_SCREEN_INTENT 权限，在应用安装时自动授予此权限。

全屏 intent 通知适用于需要用户立即注意的极高优先级通知，例如用户来电或用户配置的闹钟设置。对于以 Android 14（API 级别 34）或更高版本为目标平台的应用，获准使用此权限的应用仅限于提供通话和闹钟的应用。对于不适合此资料的任何应用，Google Play 商店会撤消其默认的 USE_FULL_SCREEN_INTENT 权限。这些政策变更的截止日期为 2024 年 5 月 31 日。

在用户更新到 Android 14 之前，在手机上安装的应用仍拥有此权限。用户可以开启和关闭此权限。

您可以使用新 API NotificationManager.canUseFullScreenIntent 检查应用是否具有该权限；如果没有，应用可以使用新 intent ACTION_MANAGE_APP_USE_FULL_SCREEN_INTENT 启动设置页面，在该页面中，用户可以授予权限。

安全

对隐式 intent 和待处理 intent 的限制

对于以 Android 14（API 级别 34）或更高版本为目标平台的应用，Android 会通过以下方式限制应用向内部应用组件发送隐式 intent：

• 隐式 intent 只能传送到导出的组件。应用必须使用显式 intent 传送到未导出的组件，或将该组件标记为已导出。
• 如果应用通过未指定组件或软件包的 intent 创建可变待处理 intent，系统会抛出异常。

这些变更可防止恶意应用拦截意在供应用内部组件使用的隐式 intent。

例如，下面是可以在应用的清单文件中声明的 intent 过滤器：

<activity
    android:name=".AppActivity"
    android:exported="false">
    <intent-filter>
        <action android:name="com.example.action.APP_ACTION" />
        <category android:name="android.intent.category.DEFAULT" />
    </intent-filter>
</activity>

如果应用尝试使用隐式 intent 启动此 activity，则系统会抛出异常：

Kotlin

// Throws an exception when targeting Android 14.
context.startActivity(Intent("com.example.action.APP_ACTION"))

Java

// Throws an exception when targeting Android 14.
context.startActivity(new Intent("com.example.action.APP_ACTION"));

如需启动非导出的 activity，应用应改用显式 intent：

Kotlin

// This makes the intent explicit.
val explicitIntent =
        Intent("com.example.action.APP_ACTION")
explicitIntent.apply {
    package = context.packageName
}
context.startActivity(explicitIntent)

Java

// This makes the intent explicit.
Intent explicitIntent =
        new Intent("com.example.action.APP_ACTION")
explicitIntent.setPackage(context.getPackageName());
context.startActivity(explicitIntent);

在运行时注册的广播接收器必须指定导出行为

Apps and services that target Android 14 (API level 34) or higher and use context-registered receivers are required to specify a flag to indicate whether or not the receiver should be exported to all other apps on the device: either RECEIVER_EXPORTED or RECEIVER_NOT_EXPORTED, respectively. This requirement helps protect apps from security vulnerabilities by leveraging the features for these receivers introduced in Android 13.

Exception for receivers that receive only system broadcasts

If your app is registering a receiver only for system broadcasts through Context#registerReceiver methods, such as Context#registerReceiver(), then it shouldn't specify a flag when registering the receiver.

更安全的动态代码加载

If your app targets Android 14 (API level 34) or higher and uses Dynamic Code Loading (DCL), all dynamically-loaded files must be marked as read-only. Otherwise, the system throws an exception. We recommend that apps avoid dynamically loading code whenever possible, as doing so greatly increases the risk that an app can be compromised by code injection or code tampering.

If you must dynamically load code, use the following approach to set the dynamically-loaded file (such as a DEX, JAR, or APK file) as read-only as soon as the file is opened and before any content is written:

Kotlin

val jar = File("DYNAMICALLY_LOADED_FILE.jar")
val os = FileOutputStream(jar)
os.use {
    // Set the file to read-only first to prevent race conditions
    jar.setReadOnly()
    // Then write the actual file content
}
val cl = PathClassLoader(jar, parentClassLoader)

Java

File jar = new File("DYNAMICALLY_LOADED_FILE.jar");
try (FileOutputStream os = new FileOutputStream(jar)) {
    // Set the file to read-only first to prevent race conditions
    jar.setReadOnly();
    // Then write the actual file content
} catch (IOException e) { ... }
PathClassLoader cl = new PathClassLoader(jar, parentClassLoader);

Handle dynamically-loaded files that already exist

To prevent exceptions from being thrown for existing dynamically-loaded files, we recommend deleting and recreating the files before you try to dynamically load them again in your app. As you recreate the files, follow the preceding guidance for marking the files read-only at write time. Alternatively, you can re-label the existing files as read-only, but in this case, we strongly recommend that you verify the integrity of the files first (for example, by checking the file's signature against a trusted value), to help protect your app from malicious actions.

针对从后台启动 activity 的其他限制

For apps targeting Android 14 (API level 34) or higher, the system further restricts when apps are allowed to start activities from the background:

• When an app sends a PendingIntent using PendingIntent#send() or similar methods, the app must opt in if it wants to grant its own background activity launch privileges to start the pending intent. To opt in, the app should pass an ActivityOptions bundle with setPendingIntentBackgroundActivityStartMode(MODE_BACKGROUND_ACTIVITY_START_ALLOWED).
• When a visible app binds a service of another app that's in the background using the bindService() method, the visible app must now opt in if it wants to grant its own background activity launch privileges to the bound service. To opt in, the app should include the BIND_ALLOW_ACTIVITY_STARTS flag when calling the bindService() method.

These changes expand the existing set of restrictions to protect users by preventing malicious apps from abusing APIs to start disruptive activities from the background.

压缩路径遍历

For apps targeting Android 14 (API level 34) or higher, Android prevents the Zip Path Traversal Vulnerability in the following way: ZipFile(String) and ZipInputStream.getNextEntry() throws a ZipException if zip file entry names contain ".." or start with "/".

Apps can opt-out from this validation by calling dalvik.system.ZipPathValidator.clearCallback().

每个 MediaProjection 拍摄会话都需要征得用户同意

For apps targeting Android 14 (API level 34) or higher, a SecurityException is thrown by MediaProjection#createVirtualDisplay in either of the following scenarios:

• Your app caches the Intent that is returned from MediaProjectionManager#createScreenCaptureIntent, and passes it multiple times to MediaProjectionManager#getMediaProjection.
• Your app invokes MediaProjection#createVirtualDisplay multiple times on the same MediaProjection instance.

Your app must ask the user to give consent before each capture session. A single capture session is a single invocation on MediaProjection#createVirtualDisplay, and each MediaProjection instance must be used only once.

Handle configuration changes

If your app needs to invoke MediaProjection#createVirtualDisplay to handle configuration changes (such as the screen orientation or screen size changing), you can follow these steps to update the VirtualDisplay for the existing MediaProjection instance:

1. Invoke VirtualDisplay#resize with the new width and height.
2. Provide a new Surface with the new width and height to VirtualDisplay#setSurface.

Register a callback

Your app should register a callback to handle cases where the user doesn't grant consent to continue a capture session. To do this, implement Callback#onStop and have your app release any related resources (such as the VirtualDisplay and Surface).

If your app doesn't register this callback, MediaProjection#createVirtualDisplay throws an IllegalStateException when your app invokes it.

更新后的非 SDK 限制

Android 14 包含更新后的受限非 SDK 接口列表（基于与 Android 开发者之间的协作以及最新的内部测试）。在限制使用非 SDK 接口之前，我们会尽可能确保有可用的公开替代方案。

如果您的应用并非以 Android 14 为目标平台，其中一些变更可能不会立即对您产生影响。然而，虽然您目前仍可以使用一些非 SDK 接口（具体取决于应用的目标 API 级别），但只要您使用任何非 SDK 方法或字段，终归存在导致应用出问题的显著风险。

如果您不确定自己的应用是否使用了非 SDK 接口，则可以测试您的应用来进行确认。如果您的应用依赖于非 SDK 接口，您应该开始计划迁移到 SDK 替代方案。然而，我们知道某些应用具有使用非 SDK 接口的有效用例。如果您无法为应用中的某项功能找到使用非 SDK 接口的替代方案，应请求新的公共 API。

如需详细了解此 Android 版本中的变更，请参阅 Android 14 中有关限制非 SDK 接口的更新。如需全面了解有关非 SDK 接口的详细信息，请参阅对非 SDK 接口的限制。