功能和 API 概览

Android 15 为开发者引入了许多出色的功能和 API。以下部分总结了这些功能，可帮助您开始使用相关 API。

如需查看新增、修改和移除的 API 的详细列表，请参阅 API 差异 报告。如需详细了解新增的 API，请访问 Android API 参考文档；对于 Android 15，请查找在 API 级别 35 中添加的 API。如需了解平台变更可能会在哪些方面影响您的应用，请务必查看 Android 15 行为变更，这些变更会影响以 Android 15 为目标平台的应用和所有应用。

相机和媒体

Android 15 包含多种功能，可改善摄像头和媒体体验，并让您能够使用工具和硬件来帮助创作者在 Android 上实现他们的愿景。

如需详细了解 Android 媒体和 摄像头的最新功能和开发者解决方案，请观看 Google I/O 大会上的构建现代 Android 媒体和摄像头 体验讲座。

弱光增强

Android 15 introduces Low Light Boost, an auto-exposure mode available to both Camera 2 and the night mode camera extension. Low Light Boost adjusts the exposure of the Preview stream in low-light conditions. This is different from how the night mode camera extension creates still images, because night mode combines a burst of photos to create a single, enhanced image. While night mode works very well for creating a still image, it can't create a continuous stream of frames, but Low Light Boost can. Thus, Low Light Boost enables camera capabilities, such as:

  • Providing an enhanced image preview, so users are better able to frame their low-light pictures
  • Scanning QR codes in low light

If you enable Low Light Boost, it automatically turns on when there's a low light level, and turns off when there's more light.

Apps can record off the Preview stream in low-light conditions to save a brightened video.

For more information, see Low Light Boost.

应用内摄像头控件

Android 15 adds an extension for more control over the camera hardware and its algorithms on supported devices:

  • Advanced flash strength adjustments enabling precise control of flash intensity in both SINGLE and TORCH modes while capturing images.

HDR 余量控制

Android 15 chooses HDR headroom that is appropriate for the underlying device capabilities and bit-depth of the panel. For pages that have lots of SDR content, such as a messaging app displaying a single HDR thumbnail, this behavior can end up adversely influencing the perceived brightness of the SDR content. Android 15 lets you control the HDR headroom with setDesiredHdrHeadroom to strike a balance between SDR and HDR content.

The brightness of SDR UI elements on the left screen appears to be more uniform than the brightness on the right screen, which simulates possible headroom issues when HDR and SDR content are mixed. By adjusting the HDR headroom, you can achieve a better balance between the SDR and HDR content.

响度控制

Android 15 introduces support for the CTA-2075 loudness standard to help you avoid audio loudness inconsistencies and ensure users don't have to constantly adjust volume when switching between content. The system leverages known characteristics of the output devices (headphones and speaker) along with loudness metadata available in AAC audio content to intelligently adjust the audio loudness and dynamic range compression levels.

To enable this feature, you need to ensure loudness metadata is available in your AAC content and enable the platform feature in your app. For this, you instantiate a LoudnessCodecController object by calling its create factory method with the audio session ID from the associated AudioTrack; this automatically starts applying audio updates. You can pass an OnLoudnessCodecUpdateListener to modify or filter loudness parameters before they are applied on the MediaCodec.

// Media contains metadata of type MPEG_4 OR MPEG_D
val mediaCodec = …
val audioTrack = AudioTrack.Builder()
                                .setSessionId(sessionId)
                                .build()
...
// Create new loudness controller that applies the parameters to the MediaCodec
try {
   val lcController = LoudnessCodecController.create(mSessionId)
   // Starts applying audio updates for each added MediaCodec
}

AndroidX media3 ExoPlayer will also be updated to use the LoudnessCodecController APIs for a seamless app integration.

虚拟 MIDI 2.0 设备

Android 13 added support for connecting to MIDI 2.0 devices using USB, which communicate using Universal MIDI Packets (UMP). Android 15 extends UMP support to virtual MIDI apps, enabling composition apps to control synthesizer apps as a virtual MIDI 2.0 device just like they would with an USB MIDI 2.0 device.

更高效的 AV1 软件解码

dav1d 徽标

dav1d 是 VideoLAN 推出的热门 AV1 软件解码器，适用于不支持硬件 AV1 解码的 Android 设备。与旧版 AV1 软件解码器相比，dav1d 的性能最高可提升 3 倍，让更多用户（包括一些低端和中端设备）能够播放高清 AV1 视频。

您的应用需要选择启用 dav1d，方法是通过名称 "c2.android.av1-dav1d.decoder" 调用它。在后续更新中，dav1d 将成为默认的 AV1 软件解码器。此支持已标准化，并向后移植到收到 Google Play 系统更新的 Android 11 设备。

开发者工作效率和工具

虽然我们的大部分工作都是围绕 Android Studio、Jetpack Compose 和 Android Jetpack 库等工具来提高您的工作效率，但我们始终在平台中寻找方法，帮助您更轻松地 实现您的愿景。

OpenJDK 17 更新

Android 15 continues the work of refreshing Android's core libraries to align with the features in the latest OpenJDK LTS releases.

The following key features and improvements are included:

These APIs are updated on over a billion devices running Android 12 (API level 31) and higher through Google Play System updates, so you can target the latest programming features.

PDF 方面的改进

Android 15 includes substantial improvements to the PdfRenderer APIs. Apps can incorporate advanced features such as rendering password-protected files, annotations, form editing, searching, and selection with copy. Linearized PDF optimizations are supported to speed local PDF viewing and reduce resource use. The Jetpack PDF library uses these APIs to simplify adding PDF viewing capabilities to your app.

The latest updates to PDF rendering include features such as searching an embedded PDF file.

The PdfRenderer has been moved to a module that can be updated using Google Play system updates independent of the platform release, and we're supporting these changes back to Android 11 (API level 30) by creating a compatible pre-Android 15 version of the API surface, called PdfRendererPreV.

自动切换语言方面的改进

Android 14 added on-device, multi-language recognition in audio with automatic switching between languages, but this can cause words to get dropped, especially when languages switch with less of a pause between the two utterances. Android 15 adds additional controls to help apps tune this switching to their use case. EXTRA_LANGUAGE_SWITCH_INITIAL_ACTIVE_DURATION_TIME_MILLIS confines the automatic switching to the beginning of the audio session, while EXTRA_LANGUAGE_SWITCH_MATCH_SWITCHES deactivates the language switching after a defined number of switches. These options are particularly useful if you expect that there will be a single language spoken during the session that should be autodetected.

改进的 OpenType Variable Font API

Android 15 improves the usability of the OpenType variable font. You can create a FontFamily instance from a variable font without specifying weight axes with the buildVariableFamily API. The text renderer overrides the value of wght axis to match the displaying text.

Using the API simplifies the code for creating a Typeface considerably:

Kotlin

val newTypeface = Typeface.CustomFallbackBuilder(
            FontFamily.Builder(
                Font.Builder(assets, "RobotoFlex.ttf").build())
                    .buildVariableFamily())
    .build()

Java

Typeface newTypeface = Typeface.CustomFallbackBuilder(
            new FontFamily.Builder(
                new Font.Builder(assets, "RobotoFlex.ttf").build())
                    .buildVariableFamily())
    .build();

Previously, to create the same Typeface, you would need much more code:

Kotlin

val oldTypeface = Typeface.CustomFallbackBuilder(
            FontFamily.Builder(
                Font.Builder(assets, "RobotoFlex.ttf")
                    .setFontVariationSettings("'wght' 400")
                    .setWeight(400)
                    .build())
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 100")
                        .setWeight(100)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 200")
                        .setWeight(200)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 300")
                        .setWeight(300)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 500")
                        .setWeight(500)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 600")
                        .setWeight(600)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 700")
                        .setWeight(700)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 800")
                        .setWeight(800)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 900")
                        .setWeight(900)
                        .build()
                ).build()
        ).build()

Java

Typeface oldTypeface = new Typeface.CustomFallbackBuilder(
    new FontFamily.Builder(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 400")
            .setWeight(400)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 100")
            .setWeight(100)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 200")
            .setWeight(200)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 300")
            .setWeight(300)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 500")
            .setWeight(500)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 600")
            .setWeight(600)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 700")
            .setWeight(700)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 800")
            .setWeight(800)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 900")
            .setWeight(900)
            .build()
    )
    .build()
).build();

Here's an example of how a Typeface created with both the old and new APIs renders:

An example of how Typeface rendering differs using new and old APIs

In this example, the Typeface created with the old API doesn't have the capability to create accurate font weights for the 350, 450, 550 and 650 Font instances, so the renderer falls back to the closest weight. So in this case, 300 is rendered instead of 350, 400 is rendered instead of 450, and so on. By contrast, the Typeface created with the new APIs dynamically creates a Font instance for a given weight, so accurate weights are rendered for 350, 450, 550, and 650 as well.

精细的换行符控制

从 Android 15 开始，TextView 和底层行断开符可以将给定部分文本保留在同一行中，以提高可读性。您可以通过在字符串资源或 createNoBreakSpan 中使用 <nobreak> 标记来充分利用此换行符自定义功能。同样，您可以使用 <nohyphen> 标记或 createNoHyphenationSpan 来防止对字词进行分词。

例如，以下字符串资源不包含换行符，在呈现时，文本“Pixel 8 Pro”会在不合适的位置换行：

<resources>
    <string name="pixel8pro">The power and brains behind Pixel 8 Pro.</string>
</resources>

相比之下，此字符串资源包含 <nobreak> 标记，该标记会将字词“Pixel 8 Pro”换行，并防止换行：

<resources>
    <string name="pixel8pro">The power and brains behind <nobreak>Pixel 8 Pro.</nobreak></string>
</resources>

以下图片展示了这些字符串呈现方式的差异：

一行文本的布局，其中显示短语“Pixel 8 Pro.”未使用 <nobreak> 标记换行。
使用 <nobreak> 标记封装“Pixel 8 Pro.”短语的同一行文本的布局。

应用归档

Android 和 Google Play 宣布支持最后的应用归档功能 年，这让用户可以通过移除部分内容来释放空间 通过 Android 应用发布的设备中不常用的应用 前往 Google Play 下载套装。Android 15 在操作系统级别支持应用归档和解压缩，让所有应用商店都能更轻松地实现归档和解压缩。

具有 REQUEST_DELETE_PACKAGES 权限的应用可以调用 PackageInstaller requestArchive 方法请求归档 已安装的应用软件包，这会移除 APK 和所有缓存的文件，但会保留 用户数据已归档的应用会通过 LauncherApps API 作为可显示的应用返回；用户会看到一个界面处理，以突出显示这些应用已归档。如果用户点按已归档的应用，负责安装的应用会收到解除归档请求，并且可以通过 ACTION_PACKAGE_ADDED 广播监控恢复过程。

使用开发者选项在设备上启用 16 KB 模式

切换以 16KB 页面大小启动设备开发者选项，以在 16 KB 模式下启动设备。

在 Android 15 的 QPR 版本中，您可以使用某些设备上提供的开发者选项，以 16 KB 模式启动设备并执行设备端测试。在使用开发者选项之前，请依次前往设置 > 系统 > 软件更新，并应用所有可用的更新。

此开发者选项适用于以下设备：

  • Pixel 8 和 Pixel 8 Pro（搭载 Android 15 QPR1 或更高版本）

  • Pixel 8a（搭载 Android 15 QPR1 或更高版本）

  • Pixel 9、9 Pro 和 9 Pro XL（搭载 Android 15 QPR2 或更高版本）

  • Pixel 9a（搭载 Android 16 或更高版本）

图形

Android 15 带来了最新的图形改进，包括 ANGLE 和 Canvas 图形系统的新增功能。

Android GPU 使用权限现代化

Vulkan 徽标

与早期相比，Android 硬件已经有了很大的进步。早期，核心操作系统在单个 CPU 上运行，并且使用基于固定功能流水线的 API 访问 GPU。从 Android 7.0（API 级别 24）开始，NDK 中就提供了 Vulkan® 图形 API，其较低级别的抽象更好地反映了现代 GPU 硬件，可更好地扩缩以支持多个 CPU 核心，并可降低 CPU 驱动程序开销，从而提升应用性能。所有现代游戏引擎都支持 Vulkan。

Vulkan 是 Android 与 GPU 的首选接口。因此，Android 15 包含 ANGLE 作为可选层，用于在 Vulkan 基础上运行 OpenGL® ES。改用 ANGLE 将标准化 Android OpenGL 实现，提高兼容性，在某些情况下还有助于提升性能。在 Android 15 中，您可以依次前往设置 -> 系统 -> 开发者选项 -> 实验性功能：启用 ANGLE，启用开发者选项，以便通过 ANGLE 测试 OpenGL ES 应用的稳定性和性能。

Android ANGLE on Vulkan 路线图

Android GPU API 即将发生变更的路线图。

为了简化 GPU 堆栈，我们今后将在更多新设备上将 ANGLE 作为 GL 系统驱动程序提供，未来 OpenGL/ES 将只能通过 ANGLE 获得支持。尽管如此，我们计划继续在所有设备上支持 OpenGL ES。

建议的后续措施

使用开发者选项为 OpenGL ES 选择 ANGLE 驱动程序，然后测试您的应用。对于新项目，我们强烈建议您为 C/C++ 使用 Vulkan。

Canvas 方面的改进

Android 15 继续对 Android 的 Canvas 图形系统进行现代化改造，并新增了以下功能：

  • Matrix44 提供一个 4x4 矩阵来转换坐标，当您想在 3D 中操控画布时，应使用此矩阵。
  • clipShader 会将当前剪裁区域与指定的着色器相交，而 clipOutShader 会将剪裁区域设为当前剪裁区域与着色器的差值，每个操作都会将着色器视为一个 Alpha 遮罩。这支持高效地绘制复杂形状。

性能和电池

Android 始终专注于帮助您提高应用的性能和质量。Android 15 引入了 API，可帮助您更高效地执行应用中的任务、优化应用性能并收集有关应用的洞见。

如需了解省电最佳实践、调试网络和耗电量，以及 我们如何在 Android 15 和最新版 Android 中提高后台工作的电池效率，请观看 提高 Android 后台工作的电池效率 讲座（Google I/O 大会）。

ApplicationStartInfo API

在以前的 Android 版本中，应用启动一直是个谜。在应用中确定应用是从冷启动、温启动还是热启动状态启动很困难。您还很难了解应用在各种启动阶段（分叉进程、调用 onCreate、绘制第一个帧等）所花的时间。在 Application 类被实例化时，您无法知道应用是通过广播、content provider、作业、备份、启动完成、闹钟还是 Activity 启动的。

Android 15 上的 ApplicationStartInfo API 提供了所有这些功能，以及更多功能。您甚至可以选择在流程中添加自己的时间戳，以便在一个位置收集时间数据。除了收集指标之外，您还可以使用 ApplicationStartInfo 直接优化应用启动；例如，您可以消除在应用因广播而启动时在 Application 类中实例化与界面相关的库所带来的高昂开销。

详细的应用大小信息

Since Android 8.0 (API level 26), Android has included the StorageStats.getAppBytes API that summarizes the installed size of an app as a single number of bytes, which is a sum of the APK size, the size of files extracted from the APK, and files that were generated on the device such as ahead-of-time (AOT) compiled code. This number is not very insightful in terms of how your app is using storage.

Android 15 adds the StorageStats.getAppBytesByDataType([type]) API, which lets you get insight into how your app is using up all that space, including APK file splits, AOT and speedup related code, dex metadata, libraries, and guided profiles.

由应用管理的性能分析

Android 15 includes the ProfilingManager class, which lets you collect profiling information from within your app such as heap dumps, heap profiles, stack sampling, and more. It provides a callback to your app with a supplied tag to identify the output file, which is delivered to your app's files directory. The API does rate limiting to minimize the performance impact.

To simplify constructing profiling requests in your app, we recommend using the corresponding Profiling AndroidX API, available in Core 1.15.0-rc01 or higher.

SQLite 数据库方面的改进

Android 15 introduces SQLite APIs that expose advanced features from the underlying SQLite engine that target specific performance issues that can manifest in apps. These APIs are included with the update of SQLite to version 3.44.3.

Developers should consult best practices for SQLite performance to get the most out of their SQLite database, especially when working with large databases or when running latency-sensitive queries.

  • Read-only deferred transactions: when issuing transactions that are read-only (don't include write statements), use beginTransactionReadOnly() and beginTransactionWithListenerReadOnly(SQLiteTransactionListener) to issue read-only DEFERRED transactions. Such transactions can run concurrently with each other, and if the database is in WAL mode, they can run concurrently with IMMEDIATE or EXCLUSIVE transactions.
  • Row counts and IDs: APIs were added to retrieve the count of changed rows or the last inserted row ID without issuing an additional query. getLastChangedRowCount() returns the number of rows that were inserted, updated, or deleted by the most recent SQL statement within the current transaction, while getTotalChangedRowCount() returns the count on the current connection. getLastInsertRowId() returns the rowid of the last row to be inserted on the current connection.
  • Raw statements: issue a raw SQlite statement, bypassing convenience wrappers and any additional processing overhead that they may incur.

Android 动态性能框架更新

Android 15 继续投资于 Android 动态性能框架 (ADPF)，这是一组 API，可让游戏和性能密集型应用更为直接地与 Android 设备的电源和散热系统进行互动。在受支持的设备上，Android 15 添加了 ADPF 功能：

  • 针对提示会话的节能模式，用于指明其关联的线程应优先节能而非性能，非常适合长时间运行的后台工作负载。
  • 系统可以在提示会话中报告 GPU 和 CPU 工作时长，以便同时调整 CPU 和 GPU 频率，以最佳方式满足工作负载需求。
  • 热余量阈值，用于根据余量预测来解读可能的热节流状态。

如需详细了解如何在应用和游戏中使用 ADPF，请参阅相关文档。

隐私权

Android 15 包含多种功能，可帮助应用开发者保护用户隐私。

屏幕录制检测

Android 15 增加了对应用的支持，以检测 正在录制。每当应用转换时，系统都会调用回调 在屏幕录制内容中处于可见与隐藏状态之间。如果正在记录注册进程的 UID 拥有的 activity，则系统会将应用视为可见。这样一来，如果您的应用执行敏感操作，您就可以告知用户正在录制他们的操作。

val mCallback = Consumer<Int> { state ->
  if (state == SCREEN_RECORDING_STATE_VISIBLE) {
    // We're being recorded
  } else {
    // We're not being recorded
  }
}

override fun onStart() {
   super.onStart()
   val initialState =
      windowManager.addScreenRecordingCallback(mainExecutor, mCallback)
   mCallback.accept(initialState)
}

override fun onStop() {
    super.onStop()
    windowManager.removeScreenRecordingCallback(mCallback)
}

扩展的 IntentFilter 功能

Android 15 builds in support for more precise Intent resolution through UriRelativeFilterGroup, which contains a set of UriRelativeFilter objects that form a set of Intent matching rules that must each be satisfied, including URL query parameters, URL fragments, and blocking or exclusion rules.

These rules can be defined in the AndroidManifest XML file with the <uri-relative-filter-group> tag, which can optionally include an android:allow tag. These tags can contain <data> tags that use existing data tag attributes as well as the android:query and android:fragment attributes.

Here's an example of the AndroidManifest syntax:

<intent-filter android:autoVerify="true">
  <action android:name="android.intent.action.VIEW" />
  <category android:name="android.intent.category.BROWSABLE" />
  <category android:name="android.intent.category.DEFAULT" />
  <data android:scheme="http" />
  <data android:scheme="https" />
  <data android:host="astore.com" />
  <uri-relative-filter-group>
    <data android:pathPrefix="/auth" />
    <data android:query="region=na" />
  </uri-relative-filter-group>
  <uri-relative-filter-group android:allow="false">
    <data android:pathPrefix="/auth" />
    <data android:query="mobileoptout=true" />
  </uri-relative-filter-group>
  <uri-relative-filter-group android:allow="false">
    <data android:pathPrefix="/auth" />
    <data android:fragmentPrefix="faq" />
  </uri-relative-filter-group>
</intent-filter>

私密空间

The private space can be unlocked and locked to show or hide sensitive apps on a device.

Private space lets users create a separate space on their device where they can keep sensitive apps away from prying eyes, under an additional layer of authentication. The private space uses a separate user profile. The user can choose to use the device lock or a separate lock factor for the private space.

Apps in the private space show up in a separate container in the launcher, and are hidden from the recents view, notifications, settings, and from other apps when the private space is locked. User-generated and downloaded content (such as media or files) and accounts are separated between the private space and the main space. The system sharesheet and the photo picker can be used to give apps access to content across spaces when the private space is unlocked.

Users can't move existing apps and their data into the private space. Instead, users select an install option in the private space to install an app using whichever app store they prefer. Apps in the private space are installed as separate copies from any apps in the main space (new copies of the same app).

When a user locks the private space, the profile is stopped. While the profile is stopped, apps in the private space are no longer active and can't perform foreground or background activities, including showing notifications.

We recommend that you test your app with private space to make sure your app works as expected, especially if your app falls into one of the following categories:

查询“Selected Photos Access”的最新用户选择

现在，如果应用获得了部分访问权限，则只能突出显示最近选择的照片和视频。此功能可以改善频繁请求访问照片和视频的应用的用户体验。如需在应用中使用此功能，请在通过 ContentResolver 查询 MediaStore 时启用 QUERY_ARG_LATEST_SELECTION_ONLY 参数。

Kotlin

val externalContentUri = MediaStore.Files.getContentUri("external")

val mediaColumns = arrayOf(
   FileColumns._ID,
   FileColumns.DISPLAY_NAME,
   FileColumns.MIME_TYPE,
)

val queryArgs = bundleOf(
   // Return only items from the last selection (selected photos access)
   QUERY_ARG_LATEST_SELECTION_ONLY to true,
   // Sort returned items chronologically based on when they were added to the device's storage
   QUERY_ARG_SQL_SORT_ORDER to "${FileColumns.DATE_ADDED} DESC",
   QUERY_ARG_SQL_SELECTION to "${FileColumns.MEDIA_TYPE} = ? OR ${FileColumns.MEDIA_TYPE} = ?",
   QUERY_ARG_SQL_SELECTION_ARGS to arrayOf(
       FileColumns.MEDIA_TYPE_IMAGE.toString(),
       FileColumns.MEDIA_TYPE_VIDEO.toString()
   )
)

Java

Uri externalContentUri = MediaStore.Files.getContentUri("external");

String[] mediaColumns = {
    FileColumns._ID,
    FileColumns.DISPLAY_NAME,
    FileColumns.MIME_TYPE
};

Bundle queryArgs = new Bundle();
queryArgs.putBoolean(MediaStore.QUERY_ARG_LATEST_SELECTION_ONLY, true);
queryArgs.putString(MediaStore.QUERY_ARG_SQL_SORT_ORDER, FileColumns.DATE_ADDED + " DESC");
queryArgs.putString(MediaStore.QUERY_ARG_SQL_SELECTION, FileColumns.MEDIA_TYPE + " = ? OR " + FileColumns.MEDIA_TYPE + " = ?");
queryArgs.putStringArray(MediaStore.QUERY_ARG_SQL_SELECTION_ARGS, new String[] {
    String.valueOf(FileColumns.MEDIA_TYPE_IMAGE),
    String.valueOf(FileColumns.MEDIA_TYPE_VIDEO)
});

Privacy Sandbox on Android

Android 15 includes the latest Android Ad Services extensions, incorporating the latest version of the Privacy Sandbox on Android. This addition is part of our work to develop technologies that improve user privacy and enable effective, personalized advertising experiences for mobile apps. Our privacy sandbox page has more information about the Privacy Sandbox on Android developer preview and beta programs to help you get started.

健康数据共享

Android 15 集成了与 Health Connect by Android 相关的最新扩展程序。Health Connect by Android 是一个安全的集中式平台，可用于管理和共享应用收集的健康与健身数据。此次更新 增加了对健身、 营养、体表温度、训练计划等。

体表温度追踪功能让用户可以更精确地存储和分享体表温度 来自穿戴式设备或其他跟踪设备的体温数据。

训练计划是一种结构化的锻炼计划，可帮助用户实现健身目标。训练计划支持各种完成和表现目标：

如需详细了解 Android 中 Health Connect 的最新更新，请参阅 利用 Android 打造自适应体验 健康演讲。

应用屏幕共享

Android 15 supports app screen sharing so users can share or record just an app window rather than the entire device screen. This feature, first enabled in Android 14 QPR2, includes MediaProjection callbacks that allow your app to customize the app screen sharing experience. Note that for apps targeting Android 14 (API level 34) or higher, user consent is required for each MediaProjection capture session.

用户体验和系统界面

Android 15 让应用开发者和用户能够更灵活地控制和配置设备，以满足他们的需求。

如需详细了解如何使用 Android 15 中的最新改进来改善 应用的用户体验，请观看 改善 Android 应用 讲座（Google I/O 大会）。

使用 Generated Previews API 获得更丰富的微件预览

Before Android 15, the only way to provide widget picker previews was to specify a static image or layout resource. These previews often differ significantly from the look of the actual widget when it is placed on the home screen. Also, static resources can't be created with Jetpack Glance, so a Glance developer had to screenshot their widget or create an XML layout to have a widget preview.

Android 15 adds support for generated previews. This means that app widget providers can generate RemoteViews to use as the picker preview, instead of a static resource.

Apps can provide Remote Views to the Widget Picker, so they can update the content in the picker to be more representative of what the user will see.

Push API

Apps can provide generated previews through a push API. Apps can provide previews at any point in their lifecycle, and don't receive an explicit request from the host to provide previews. Previews are persisted in AppWidgetService, and hosts can request them on-demand. The following example loads an XML widget layout resource and sets it as the preview:

AppWidgetManager.getInstance(appContext).setWidgetPreview(
   ComponentName(
       appContext,
       SociaLiteAppWidgetReceiver::class.java
   ),
   AppWidgetProviderInfo.WIDGET_CATEGORY_HOME_SCREEN,
   RemoteViews("com.example", R.layout.widget_preview)
)

The expected flow is:

  1. At any time, the widget provider calls setWidgetPreview. The provided previews are persisted in AppWidgetService with other provider info.
  2. setWidgetPreview notifies hosts of an updated preview through the AppWidgetHost.onProvidersChanged callback. In response, the widget host reloads all of its provider information.
  3. When displaying a widget preview, the host checks AppWidgetProviderInfo.generatedPreviewCategories, and if the chosen category is available, calls AppWidgetManager.getWidgetPreview to return the saved preview for this provider.

When to call setWidgetPreview

Because there is no callback to provide previews, apps can choose to send previews at any point when they are running. How often to update the preview depends on the widget's use case.

The following list describes the two main categories of preview use cases:

  • Providers that show real data in their widget previews, such as personalized or recent information. These providers can set the preview once the user has signed in or has done initial configuration in their app. After this, they can set up a periodic task to update the previews at their chosen cadence. Examples of this type of widget could be a photo, calendar, weather or news widget.
  • Providers that show static information in previews or quick-action widgets that don't display any data. These providers can set previews once, when the app first launches. Examples of this type of widget include a drive quick actions widget or chrome shortcuts widget.

Some providers might show static previews on the hub mode picker, but real information on the homescreen picker. These providers should follow the guidance for both of these use cases to set previews.

画中画

Android 15 引入了画中画 (PiP) 方面的变更，确保实现 更流畅的过渡效果。对于在主界面上叠加界面元素的应用，这将非常有用，因为这些界面元素会进入 PiP。

开发者使用 onPictureInPictureModeChanged 回调来定义逻辑 用于切换叠加界面元素的可见性。此回调是 在画中画进入或退出动画播放完毕时触发。距离开始还有 Android 15 中，PictureInPictureUiState 类包含另一种状态。

在此界面状态下，以 Android 15（API 级别 35）为目标平台的应用将遵守 使用以下参数调用 Activity#onPictureInPictureUiStateChanged 回调： isTransitioningToPip()。还有 在画中画模式下，有很多与应用无关的界面元素， 包含建议、 评分和标题当应用进入画中画模式时，请使用 onPictureInPictureUiStateChanged 回调以隐藏这些界面元素。当 应用从画中画窗口进入全屏模式，使用 onPictureInPictureModeChanged 回调以取消隐藏这些元素，如 请参阅以下示例：

override fun onPictureInPictureUiStateChanged(pipState: PictureInPictureUiState) {
        if (pipState.isTransitioningToPip()) {
          // Hide UI elements
        }
    }

override fun onPictureInPictureModeChanged(isInPictureInPictureMode: Boolean) {
        if (isInPictureInPictureMode) {
          // Unhide UI elements
        }
    }

不相关界面元素的快速可见性切换（适用于画中画窗口）有助于 确保画中画播放动画更流畅、无闪烁。

改进的“勿扰”规则

AutomaticZenRule lets apps customize Attention Management (Do Not Disturb) rules and decide when to activate or deactivate them. Android 15 greatly enhances these rules with the goal of improving the user experience. The following enhancements are included:

  • Adding types to AutomaticZenRule, allowing the system to apply special treatment to some rules.
  • Adding an icon to AutomaticZenRule, helping to make the modes be more recognizable.
  • Adding a triggerDescription string to AutomaticZenRule that describes the conditions on which the rule should become active for the user.
  • Added ZenDeviceEffects to AutomaticZenRule, allowing rules to trigger things like grayscale display, night mode, or dimming the wallpaper.

为通知渠道设置 VibrationEffect

Android 15 supports setting rich vibrations for incoming notifications by channel using NotificationChannel.setVibrationEffect, so your users can distinguish between different types of notifications without having to look at their device.

媒体投屏状态栏芯片和自动停止

Media projection can expose private user information. A new, prominent status bar chip makes users aware of any ongoing screen projection. Users can tap the chip to stop screen casting, sharing, or recording. Also, for a more intuitive user experience, any in‑progress screen projection now automatically stops when the device screen is locked.

用于屏幕共享、投屏和录制的状态栏条状标签。

大屏设备和外形规格

Android 15 为您的应用提供了支持，让您的应用能够充分利用 Android 的外形规格，包括大屏设备、翻盖设备和可折叠设备。

改进的大屏设备多任务处理

Android 15 为用户提供了在大屏设备上更好地进行多任务处理的方式。对于 例如，用户可以保存自己喜爱的分屏应用组合， 访问并固定屏幕上的任务栏，以便在应用之间快速切换。这意味着 让应用具备自适应能力比以往任何时候都更加重要。

Google I/O 大会上有一些关于构建自适应 Android 的会议 应用和使用 Material 3 构建界面 自适应库 我们的文档中提供了更多帮助信息，帮助您针对大型语言 。

封面屏幕支持

您的应用可以声明一个属性，Android 15 会使用该属性来允许您的 Application 或 Activity 显示在受支持的可翻转设备的小封面屏幕上。这些屏幕太小，无法被视为适合运行 Android 应用的兼容目标平台，但您的应用可以选择支持它们，从而让您的应用在更多平台上可用。

连接

Android 15 更新了平台，让您的应用能够使用通信和无线技术方面的最新进展。

卫星支持

Android 15 continues to extend platform support for satellite connectivity and includes some UI elements to ensure a consistent user experience across the satellite connectivity landscape.

Apps can use ServiceState.isUsingNonTerrestrialNetwork() to detect when a device is connected to a satellite, giving them more awareness of why full network services might be unavailable. Additionally, Android 15 provides support for SMS and MMS apps as well as preloaded RCS apps to use satellite connectivity for sending and receiving messages.

A notification appears when the device connects to a satellite.

更顺畅的 NFC 体验

Android 15 is working to make the tap to pay experience more seamless and reliable while continuing to support Android's robust NFC app ecosystem. On supported devices, apps can request the NfcAdapter to enter observe mode, where the device listens but doesn't respond to NFC readers, sending the app's NFC service PollingFrame objects to process. The PollingFrame objects can be used to auth ahead of the first communication to the NFC reader, allowing for a one tap transaction in many cases.

In addition, apps can register a filter on supported devices so they can be notified of polling loop activity, which allows for smooth operation with multiple NFC-aware applications.

钱包角色

Android 15 introduces a Wallet role that allows tighter integration with the user's preferred wallet app. This role replaces the NFC default contactless payment setting. Users can manage the Wallet role holder by navigating to Settings > Apps > Default Apps.

The Wallet role is used when routing NFC taps for AIDs registered in the payment category. Taps always go to the Wallet role holder unless another app that is registered for the same AID is running in the foreground.

This role is also used to determine where the Wallet Quick Access tile should go when activated. When the role is set to "None", the Quick Access tile isn't available and payment category NFC taps are only delivered to the foreground app.

安全

Android 15 可帮助您增强应用的安全性、保护应用的数据，并让用户能够更透明地了解和控制自己的数据。如需详细了解我们为改善用户保护措施和 保护您的应用免受新威胁而采取的措施，请观看 Google I/O 大会上的保障 Android 上的用户安全 讲座。

将 Credential Manager 与自动填充功能集成

Starting with Android 15, developers can link specific views like username or password fields with Credential Manager requests, making it easier to provide a tailored user experience during the sign-in process. When the user focuses on one of these views, a corresponding request is sent to Credential Manager. The resulting credentials are aggregated across providers and displayed in autofill fallback UIs, such as inline suggestions or drop-down suggestions. The Jetpack androidx.credentials library is the preferred endpoint for developers to use and will soon be available to further enhance this feature in Android 15 and higher.

将一键注册和登录与生物识别提示集成

Credential Manager integrates biometric prompts into the credential creation and sign-in processes, eliminating the need for providers to manage biometric prompts. As a result, credential providers only need to focus on the results of the create and get flows, augmented with the biometric flow result. This simplified process creates a more efficient and streamlined credential creation and retrieval process.

端到端加密的密钥管理

We are introducing the E2eeContactKeysManager in Android 15, which facilitates end-to-end encryption (E2EE) in your Android apps by providing an OS-level API for the storage of cryptographic public keys.

The E2eeContactKeysManager is designed to integrate with the platform contacts app to give users a centralized way to manage and verify their contacts' public keys.

对内容 URI 进行权限检查

Android 15 引入了一组用于对内容 URI 执行权限检查的 API：

无障碍

Android 15 添加了可改善用户无障碍体验的功能。

更好的盲文体验

在 Android 15 中，我们让 TalkBack 能够支持通过 USB 和安全蓝牙使用 HID 标准的盲文显示屏。

此标准与鼠标和键盘使用的标准非常相似，将有助于 Android 随着时间的推移支持更多类型的盲文显示屏。

国际化

Android 15 添加了功能和特性，可在设备以不同语言使用时完善用户体验。

CJK 变量字体

从 Android 15 开始，面向中文、日文和韩文 (CJK) 语言的字体文件 NotoSansCJK 现在是可变字体。可变字体为中日韩语言的创意排版提供了更多可能性。设计师可以探索更多样式的排版，并制作出以前难以实现或根本无法实现的视觉效果出色的布局。

面向中文、日文和韩文 (CJK) 的可变字体在不同字体宽度下的显示效果。

字符间两端对齐

从 Android 15 开始，可以通过 使用 JUSTIFICATION_MODE_INTER_CHARACTER。“字词间的理由”原为 最初是在 Android 8.0（API 级别 26）中引入的， Justifications 功能为使用 例如中文、日语等。

使用 JUSTIFICATION_MODE_NONE 的日语文本布局。
使用 JUSTIFICATION_MODE_NONE 的英语文本布局。


使用 JUSTIFICATION_MODE_INTER_WORD 的日语文本布局。
使用 JUSTIFICATION_MODE_INTER_WORD 的英语文本布局。


使用 JUSTIFICATION_MODE_INTER_CHARACTER 的日语文本布局。
使用 JUSTIFICATION_MODE_INTER_CHARACTER 的英语文本布局。

自动换行符配置

Android 从以下语言开始支持基于短语的日语和韩语换行： Android 13（API 级别 33）。不过，虽然基于短语的行分隔符可以提高短文本行的可读性，但对于长文本行，效果并不理想。在 Android 15 中，应用只能使用 LINE_BREAK_WORD_STYLE_AUTO 选项，针对短文本行应用基于短语的行分隔符。此选项会为文本选择最佳字词样式选项。

对于短文本行，则使用基于短语的换行符，功能相同 为 LINE_BREAK_WORD_STYLE_PHRASE，如 以下图片：

对于短文本行，LINE_BREAK_WORD_STYLE_AUTO 应用基于短语的换行符，以提高文本的可读性。 这与应用 LINE_BREAK_WORD_STYLE_PHRASE。

对于较长的文本行，LINE_BREAK_WORD_STYLE_AUTO 会使用 no 换行字词样式， LINE_BREAK_WORD_STYLE_NONE，如 以下图片：

对于较长的文本，LINE_BREAK_WORD_STYLE_AUTO 应用不换行的字词样式，以提高文本的可读性。 这与应用 LINE_BREAK_WORD_STYLE_NONE。

其他日语变体假名字体

In Android 15, a font file for old Japanese Hiragana (known as Hentaigana) is bundled by default. The unique shapes of Hentaigana characters can add a distinctive flair to artwork or design while also helping to preserve accurate transmission and understanding of ancient Japanese documents.

Character and text style for the Japanese Hentaigana font.

VideoLAN cone Copyright (c) 1996-2010 VideoLAN. This logo or a modified version may be used or modified by anyone to refer to the VideoLAN project or any product developed by the VideoLAN team, but does not indicate endorsement by the project.

Vulkan and the Vulkan logo are registered trademarks of the Khronos Group Inc.

OpenGL is a registered trademark and the OpenGL ES logo is a trademark of Hewlett Packard Enterprise used by permission by Khronos.