Android ABIs

Different Android devices use different CPUs, which in turn support different instruction sets. Each combination of CPU and instruction set has its own Application Binary Interface (ABI). An ABI includes the following information:

  • The CPU instruction set (and extensions) that can be used.
  • The endianness of memory stores and loads at runtime. Android is always little-endian.
  • Conventions for passing data between applications and the system, including alignment constraints, and how the system uses the stack and registers when it calls functions.
  • The format of executable binaries, such as programs and shared libraries, and the types of content they support. Android always uses ELF. For more information, see ELF System V Application Binary Interface.
  • How C++ names are mangled. For more information, see Generic/Itanium C++ ABI.

This page enumerates the ABIs that the NDK supports, and provides information about how each ABI works.

ABI can also refer to the native API supported by the platform. For a list of those kinds of ABI issues affecting 32-bit systems, see 32-bit ABI bugs.

Supported ABIs

Table 1. ABIs and supported instruction sets.

ABI Supported Instruction Sets Notes
armeabi-v7a
  • armeabi
  • Thumb-2
  • Neon
  • Incompatible with ARMv5/v6 devices.
    arm64-v8a
  • AArch64
  • Armv8.0 only.
    x86
  • x86 (IA-32)
  • MMX
  • SSE/2/3
  • SSSE3
  • No support for MOVBE or SSE4.
    x86_64
  • x86-64
  • MMX
  • SSE/2/3
  • SSSE3
  • SSE4.1, 4.2
  • POPCNT
  • CMPXCHG16B
  • Full x86-64-v1, but only partial x86-64-v2 (no LAHF-SAHF).

    Note: Historically the NDK supported ARMv5 (armeabi), and 32-bit and 64-bit MIPS, but support for these ABIs was removed in NDK r17.

    armeabi-v7a

    This ABI is for 32-bit ARM CPUs. It includes Thumb-2 and Neon.

    For information about the parts of the ABI that aren't Android-specific, see Application Binary Interface (ABI) for the ARM Architecture

    The NDK's build systems generate Thumb-2 code by default unless you use LOCAL_ARM_MODE in your Android.mk for ndk-build or ANDROID_ARM_MODE when configuring CMake.

    For more information on the history of Neon, see Neon Support.

    For historical reasons, this ABI uses -mfloat-abi=softfp causing all float values to be passed in integer registers and all double values to be passed in integer register pairs when making function calls. Despite the name, this only affects the floating point calling convention: the compiler will still use hardware floating point instructions for arithmetic.

    This ABI uses a 64-bit long double (IEEE binary64 the same as double).

    arm64-v8a

    This ABI is for 64-bit ARM CPUs.

    See Arm's Learn the Architecture for complete details of the parts of the ABI that aren't Android-specific. Arm also offers some porting advice in 64-bit Android Development.

    You can use Neon intrinsics in C and C++ code to take advantage of the Advanced SIMD extension. The Neon Programmer's Guide for Armv8-A provides more information about Neon intrinsics and Neon programming in general.

    On Android, the platform-specific x18 register is reserved for ShadowCallStack and should not be touched by your code. Current versions of Clang default to using the -ffixed-x18 option on Android, so unless you have hand-written assembler (or a very old compiler) you shouldn't need to worry about this.

    This ABI uses a 128-bit long double (IEEE binary128).

    x86

    This ABI is for CPUs supporting the instruction set commonly known as "x86", "i386", or "IA-32".

    Android's ABI includes the base instruction set plus the MMX, SSE, SSE2, SSE3, and SSSE3 extensions.

    The ABI does not include any other optional IA-32 instruction set extensions such as MOVBE or any variant of SSE4. You can still use these extensions, as long as you use runtime feature-probing to enable them, and provide fallbacks for devices that do not support them.

    The NDK toolchain assumes 16-byte stack alignment before a function call. The default tools and options enforce this rule. If you are writing assembly code, you must make sure to maintain stack alignment, and ensure that other compilers also obey this rule.

    Refer to the following documents for more details:

    This ABI uses a 64-bit long double (IEEE binary64 the same as double, and not the more common 80-bit Intel-only long double).

    x86_64

    This ABI is for CPUs supporting the instruction set commonly referred to as "x86-64".

    Android's ABI includes the base instruction set plus MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, and the POPCNT instruction.

    The ABI does not include any other optional x86-64 instruction set extensions such as MOVBE, SHA, or any variant of AVX. You can still use these extensions, as long as you use runtime feature probing to enable them, and provide fallbacks for devices that do not support them.

    Refer to the following documents for more details:

    This ABI uses a 128-bit long double (IEEE binary128).

    Generate code for a specific ABI

    Gradle

    Gradle (whether used via Android Studio or from the command line) builds for all non-deprecated ABIs by default. To restrict the set of ABIs that your application supports, use abiFilters. For example, to build for only 64-bit ABIs, set the following configuration in your build.gradle:

    android {
        defaultConfig {
            ndk {
                abiFilters 'arm64-v8a', 'x86_64'
            }
        }
    }
    

    ndk-build

    ndk-build builds for all non-deprecated ABIs by default. You can target a specific ABIs by setting APP_ABI in your Application.mk file. The following snippet shows a few examples of using APP_ABI:

    APP_ABI := arm64-v8a  # Target only arm64-v8a
    APP_ABI := all  # Target all ABIs, including those that are deprecated.
    APP_ABI := armeabi-v7a x86_64  # Target only armeabi-v7a and x86_64.
    

    For more information on the values you can specify for APP_ABI, see Application.mk.

    CMake

    With CMake, you build for a single ABI at a time and must specify your ABI explicitly. You do this with the ANDROID_ABI variable, which must be specified on the command line (cannot be set in your CMakeLists.txt). For example:

    $ cmake -DANDROID_ABI=arm64-v8a ...
    $ cmake -DANDROID_ABI=armeabi-v7a ...
    $ cmake -DANDROID_ABI=x86 ...
    $ cmake -DANDROID_ABI=x86_64 ...
    

    For the other flags that must be passed to CMake to build with the NDK, see the CMake guide.

    The default behavior of the build system is to include the binaries for each ABI in a single APK, also known as a fat APK. A fat APK is significantly larger than one containing only the binaries for a single ABI; the tradeoff is gaining wider compatibility, but at the expense of a larger APK. It is strongly recommended that you take advantage of either App Bundles or APK Splits to reduce the size of your APKs while still maintaining maximum device compatibility.

    At installation time, the package manager unpacks only the most appropriate machine code for the target device. For details, see Automatic extraction of native code at install time.

    ABI management on the Android platform

    This section provides details about how the Android platform manages native code in APKs.

    Native code in app packages

    Both the Play Store and Package Manager expect to find NDK-generated libraries on filepaths inside the APK matching the following pattern:

    /lib/<abi>/lib<name>.so
    

    Here, <abi> is one of the ABI names listed under Supported ABIs, and <name> is the name of the library as you defined it for the LOCAL_MODULE variable in the Android.mk file. Since APK files are just zip files, it is trivial to open them and confirm that the shared native libraries are where they belong.

    If the system does not find the native shared libraries where it expects them, it cannot use them. In such a case, the app itself has to copy the libraries over, and then perform dlopen().

    In a fat APK, each library resides under a directory whose name matches a corresponding ABI. For example, a fat APK may contain:

    /lib/armeabi/libfoo.so
    /lib/armeabi-v7a/libfoo.so
    /lib/arm64-v8a/libfoo.so
    /lib/x86/libfoo.so
    /lib/x86_64/libfoo.so
    

    Note: ARMv7-based Android devices running 4.0.3 or earlier install native libraries from the armeabi directory instead of the armeabi-v7a directory if both directories exist. This is because /lib/armeabi/ comes after /lib/armeabi-v7a/ in the APK. This issue is fixed from 4.0.4.

    Android platform ABI support

    The Android system knows at runtime which ABI(s) it supports, because build-specific system properties indicate:

    • The primary ABI for the device, corresponding to the machine code used in the system image itself.
    • Optionally, secondary ABIs, corresponding to other ABI that the system image also supports.

    This mechanism ensures that the system extracts the best machine code from the package at installation time.

    For best performance, you should compile directly for the primary ABI. For example, a typical ARMv5TE-based device would only define the primary ABI: armeabi. By contrast, a typical, ARMv7-based device would define the primary ABI as armeabi-v7a and the secondary one as armeabi, since it can run application native binaries generated for each of them.

    64-bit devices also support their 32-bit variants. Using arm64-v8a devices as an example, the device can also run armeabi and armeabi-v7a code. Note, however, that your application will perform much better on 64-bit devices if it targets arm64-v8a rather than relying on the device running the armeabi-v7a version of your application.

    Many x86-based devices can also run armeabi-v7a and armeabi NDK binaries. For such devices, the primary ABI would be x86, and the second one, armeabi-v7a.

    You can force install an apk for a specific ABI. This is useful for testing. Use the following command:

    adb install --abi abi-identifier path_to_apk
    

    Automatic extraction of native code at install time

    When installing an application, the package manager service scans the APK, and looks for any shared libraries of the form:

    lib/<primary-abi>/lib<name>.so
    

    If none is found, and you have defined a secondary ABI, the service scans for shared libraries of the form:

    lib/<secondary-abi>/lib<name>.so
    

    When it finds the libraries that it's looking for, the package manager copies them to /lib/lib<name>.so, under the application's native library directory (<nativeLibraryDir>/). The following snippets retrieve the nativeLibraryDir:

    Kotlin

    import android.content.pm.PackageInfo
    import android.content.pm.ApplicationInfo
    import android.content.pm.PackageManager
    ...
    val ainfo = this.applicationContext.packageManager.getApplicationInfo(
            "com.domain.app",
            PackageManager.GET_SHARED_LIBRARY_FILES
    )
    Log.v(TAG, "native library dir ${ainfo.nativeLibraryDir}")
    

    Java

    import android.content.pm.PackageInfo;
    import android.content.pm.ApplicationInfo;
    import android.content.pm.PackageManager;
    ...
    ApplicationInfo ainfo = this.getApplicationContext().getPackageManager().getApplicationInfo
    (
        "com.domain.app",
        PackageManager.GET_SHARED_LIBRARY_FILES
    );
    Log.v( TAG, "native library dir " + ainfo.nativeLibraryDir );
    

    If there is no shared-object file at all, the application builds and installs, but crashes at runtime.

    ARMv9: Enabling PAC and BTI for C/C++

    Enabling PAC/BTI will provide protection against some attack vectors. PAC protects return addresses by cryptographically signing them in a function's prolog and checking that the return address is still correctly signed in the epilog. BTI prevents jumping to arbitrary locations in your code by requiring that each branch target is a special instruction that does nothing but tell the processor that it's okay to land there.

    Android uses PAC/BTI instructions that do nothing on older processors that don't support the new instructions. Only ARMv9 devices will have the PAC/BTI protection, but you can run the same code on ARMv8 devices too: no need for multiple variants of your library. Even on ARMv9 devices, PAC/BTI only applies to 64-bit code.

    Enabling PAC/BTI will cause a slight increase in code size, typically 1%.

    See Arm's Learn the architecture - Providing protection for complex software (PDF) for a detailed explanation of the attack vectors PAC/BTI target, and how the protection works.

    Build changes

    ndk-build

    Set LOCAL_BRANCH_PROTECTION := standard in each module of your Android.mk.

    CMake

    Use target_compile_options($TARGET PRIVATE -mbranch-protection=standard) for each target in your CMakeLists.txt.

    Other build systems

    Compile your code using -mbranch-protection=standard. This flag only works when compiling for the arm64-v8a ABI. You don't need to use this flag when linking.

    Troubleshooting

    We are not aware of any issues with the compiler support for PAC/BTI, but:

    • Take care not to mix BTI and non-BTI code when linking, because that results in a library that doesn't have BTI protection enabled. You can use llvm-readelf to check whether your resulting library has the BTI note or not.
    $ llvm-readelf --notes LIBRARY.so
    [...]
    Displaying notes found in: .note.gnu.property
      Owner                Data size    Description
      GNU                  0x00000010   NT_GNU_PROPERTY_TYPE_0 (property note)
        Properties:    aarch64 feature: BTI, PAC
    [...]
    $
    
    • Old versions of OpenSSL (prior to 1.1.1i) have a bug in hand-written assembler that causes PAC failures. Upgrade to the current OpenSSL.

    • Old versions of some app DRM systems generate code that violates PAC/BTI requirements. If you're using app DRM and see issues when enabling PAC/BTI, contact your DRM vendor for a fixed version.