Added in API level 1

InputStream

abstract class InputStream : Closeable
kotlin.Any
   ↳ java.io.InputStream

This abstract class is the superclass of all classes representing an input stream of bytes.

Applications that need to define a subclass of InputStream must always provide a method that returns the next byte of input.

Summary

Public constructors

Constructor for subclasses to call.

Public methods
open Int

Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking, which may be 0, or 0 when end of stream is detected.

open Unit

Closes this input stream and releases any system resources associated with the stream.

open Unit
mark(readlimit: Int)

Marks the current position in this input stream.

open Boolean

Tests if this input stream supports the mark and reset methods.

open static InputStream!

Returns a new InputStream that reads no bytes.

abstract Int

Reads the next byte of data from the input stream.

open Int

Reads some number of bytes from the input stream and stores them into the buffer array b.

open Int
read(b: ByteArray!, off: Int, len: Int)

Reads up to len bytes of data from the input stream into an array of bytes.

open ByteArray!

Reads all remaining bytes from the input stream.

open ByteArray!

Reads up to a specified number of bytes from the input stream.

open Int
readNBytes(b: ByteArray!, off: Int, len: Int)

Reads the requested number of bytes from the input stream into the given byte array.

open Unit

Repositions this stream to the position at the time the mark method was last called on this input stream.

open Long
skip(n: Long)

Skips over and discards n bytes of data from this input stream.

open Unit

Skips over and discards exactly n bytes of data from this input stream.

open Long

Reads all bytes from this input stream and writes the bytes to the given output stream in the order that they are read.

Public constructors

InputStream

Added in API level 1
InputStream()

Constructor for subclasses to call.

Public methods

available

Added in API level 1
open fun available(): Int

Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking, which may be 0, or 0 when end of stream is detected. The read might be on the same thread or another thread. A single read or skip of this many bytes will not block, but may read or skip fewer bytes.

Note that while some implementations of InputStream will return the total number of bytes in the stream, many will not. It is never correct to use the return value of this method to allocate a buffer intended to hold all data in this stream.

A subclass's implementation of this method may choose to throw an IOException if this input stream has been closed by invoking the #close() method.

The available method of InputStream always returns 0.

This method should be overridden by subclasses.

Return
Int an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking or 0 when it reaches the end of the input stream.
Exceptions
java.io.IOException if an I/O error occurs.

close

Added in API level 1
open fun close(): Unit

Closes this input stream and releases any system resources associated with the stream.

The close method of InputStream does nothing.

Exceptions
java.lang.Exception if this resource cannot be closed
java.io.IOException if an I/O error occurs.

mark

Added in API level 1
open fun mark(readlimit: Int): Unit

Marks the current position in this input stream. A subsequent call to the reset method repositions this stream at the last marked position so that subsequent reads re-read the same bytes.

The readlimit arguments tells this input stream to allow that many bytes to be read before the mark position gets invalidated.

The general contract of mark is that, if the method markSupported returns true, the stream somehow remembers all the bytes read after the call to mark and stands ready to supply those same bytes again if and whenever the method reset is called. However, the stream is not required to remember any data at all if more than readlimit bytes are read from the stream before reset is called.

Marking a closed stream should not have any effect on the stream.

The mark method of InputStream does nothing.

Parameters
readlimit Int: the maximum limit of bytes that can be read before the mark position becomes invalid.

markSupported

Added in API level 1
open fun markSupported(): Boolean

Tests if this input stream supports the mark and reset methods. Whether or not mark and reset are supported is an invariant property of a particular input stream instance. The markSupported method of InputStream returns false.

Return
Boolean true if this stream instance supports the mark and reset methods; false otherwise.

nullInputStream

Added in API level 33
open static fun nullInputStream(): InputStream!

Returns a new InputStream that reads no bytes. The returned stream is initially open. The stream is closed by calling the close() method. Subsequent calls to close() have no effect.

While the stream is open, the available(), read(), read(byte[]), read(byte[], int, int), readAllBytes(), readNBytes(byte[], int, int), readNBytes(int), skip(long), skipNBytes(long), and transferTo() methods all behave as if end of stream has been reached. After the stream has been closed, these methods all throw IOException.

The markSupported() method returns false. The mark() method does nothing, and the reset() method throws IOException.

Return
InputStream! an InputStream which contains no bytes

read

Added in API level 1
abstract fun read(): Int

Reads the next byte of data from the input stream. The value byte is returned as an int in the range 0 to 255. If no byte is available because the end of the stream has been reached, the value -1 is returned. This method blocks until input data is available, the end of the stream is detected, or an exception is thrown.

A subclass must provide an implementation of this method.

Return
Int the next byte of data, or -1 if the end of the stream is reached.
Exceptions
java.io.IOException if an I/O error occurs.

read

Added in API level 1
open fun read(b: ByteArray!): Int

Reads some number of bytes from the input stream and stores them into the buffer array b. The number of bytes actually read is returned as an integer. This method blocks until input data is available, end of file is detected, or an exception is thrown.

If the length of b is zero, then no bytes are read and 0 is returned; otherwise, there is an attempt to read at least one byte. If no byte is available because the stream is at the end of the file, the value -1 is returned; otherwise, at least one byte is read and stored into b.

The first byte read is stored into element b[0], the next one into b[1], and so on. The number of bytes read is, at most, equal to the length of b. Let k be the number of bytes actually read; these bytes will be stored in elements b[0] through b[k-1], leaving elements b[k] through b[b.length-1] unaffected.

The read(b) method for class InputStream has the same effect as:

<code>read(b, 0, b.length) </code>
Parameters
b ByteArray!: the buffer into which the data is read.
Return
Int the total number of bytes read into the buffer, or -1 if there is no more data because the end of the stream has been reached.
Exceptions
java.io.IOException If the first byte cannot be read for any reason other than the end of the file, if the input stream has been closed, or if some other I/O error occurs.
java.lang.NullPointerException if b is null.

read

Added in API level 1
open fun read(
    b: ByteArray!,
    off: Int,
    len: Int
): Int

Reads up to len bytes of data from the input stream into an array of bytes. An attempt is made to read as many as len bytes, but a smaller number may be read. The number of bytes actually read is returned as an integer.

This method blocks until input data is available, end of file is detected, or an exception is thrown.

If len is zero, then no bytes are read and 0 is returned; otherwise, there is an attempt to read at least one byte. If no byte is available because the stream is at end of file, the value -1 is returned; otherwise, at least one byte is read and stored into b.

The first byte read is stored into element b[off], the next one into b[off+1], and so on. The number of bytes read is, at most, equal to len. Let k be the number of bytes actually read; these bytes will be stored in elements b[off] through b[off+k-1], leaving elements b[off+k] through b[off+len-1] unaffected.

In every case, elements b[0] through b[off-1] and elements b[off+len] through b[b.length-1] are unaffected.

The read(b, off, len) method for class InputStream simply calls the method read() repeatedly. If the first such call results in an IOException, that exception is returned from the call to the read(b, off, len) method. If any subsequent call to read() results in a IOException, the exception is caught and treated as if it were end of file; the bytes read up to that point are stored into b and the number of bytes read before the exception occurred is returned. The default implementation of this method blocks until the requested amount of input data len has been read, end of file is detected, or an exception is thrown. Subclasses are encouraged to provide a more efficient implementation of this method.

Parameters
b ByteArray!: the buffer into which the data is read.
off Int: the start offset in array b at which the data is written.
len Int: the maximum number of bytes to read.
Return
Int the total number of bytes read into the buffer, or -1 if there is no more data because the end of the stream has been reached.
Exceptions
java.io.IOException If the first byte cannot be read for any reason other than end of file, or if the input stream has been closed, or if some other I/O error occurs.
java.lang.NullPointerException If b is null.
java.lang.IndexOutOfBoundsException If off is negative, len is negative, or len is greater than b.length - off

readAllBytes

Added in API level 33
open fun readAllBytes(): ByteArray!

Reads all remaining bytes from the input stream. This method blocks until all remaining bytes have been read and end of stream is detected, or an exception is thrown. This method does not close the input stream.

When this stream reaches end of stream, further invocations of this method will return an empty byte array.

Note that this method is intended for simple cases where it is convenient to read all bytes into a byte array. It is not intended for reading input streams with large amounts of data.

The behavior for the case where the input stream is asynchronously closed, or the thread interrupted during the read, is highly input stream specific, and therefore not specified.

If an I/O error occurs reading from the input stream, then it may do so after some, but not all, bytes have been read. Consequently the input stream may not be at end of stream and may be in an inconsistent state. It is strongly recommended that the stream be promptly closed if an I/O error occurs.

Return
ByteArray! a byte array containing the bytes read from this input stream
Exceptions
java.io.IOException if an I/O error occurs
java.lang.OutOfMemoryError if an array of the required size cannot be allocated.

readNBytes

Added in API level 33
open fun readNBytes(len: Int): ByteArray!

Reads up to a specified number of bytes from the input stream. This method blocks until the requested number of bytes has been read, end of stream is detected, or an exception is thrown. This method does not close the input stream.

The length of the returned array equals the number of bytes read from the stream. If len is zero, then no bytes are read and an empty byte array is returned. Otherwise, up to len bytes are read from the stream. Fewer than len bytes may be read if end of stream is encountered.

When this stream reaches end of stream, further invocations of this method will return an empty byte array.

Note that this method is intended for simple cases where it is convenient to read the specified number of bytes into a byte array. The total amount of memory allocated by this method is proportional to the number of bytes read from the stream which is bounded by len. Therefore, the method may be safely called with very large values of len provided sufficient memory is available.

The behavior for the case where the input stream is asynchronously closed, or the thread interrupted during the read, is highly input stream specific, and therefore not specified.

If an I/O error occurs reading from the input stream, then it may do so after some, but not all, bytes have been read. Consequently the input stream may not be at end of stream and may be in an inconsistent state. It is strongly recommended that the stream be promptly closed if an I/O error occurs.

Parameters
len Int: the maximum number of bytes to read
Return
ByteArray! a byte array containing the bytes read from this input stream
Exceptions
java.lang.IllegalArgumentException if length is negative
java.io.IOException if an I/O error occurs
java.lang.OutOfMemoryError if an array of the required size cannot be allocated.

readNBytes

Added in API level 33
open fun readNBytes(
    b: ByteArray!,
    off: Int,
    len: Int
): Int

Reads the requested number of bytes from the input stream into the given byte array. This method blocks until len bytes of input data have been read, end of stream is detected, or an exception is thrown. The number of bytes actually read, possibly zero, is returned. This method does not close the input stream.

In the case where end of stream is reached before len bytes have been read, then the actual number of bytes read will be returned. When this stream reaches end of stream, further invocations of this method will return zero.

If len is zero, then no bytes are read and 0 is returned; otherwise, there is an attempt to read up to len bytes.

The first byte read is stored into element b[off], the next one in to b[off+1], and so on. The number of bytes read is, at most, equal to len. Let k be the number of bytes actually read; these bytes will be stored in elements b[off] through b[off+k-1], leaving elements b[off+k ] through b[off+len-1] unaffected.

The behavior for the case where the input stream is asynchronously closed, or the thread interrupted during the read, is highly input stream specific, and therefore not specified.

If an I/O error occurs reading from the input stream, then it may do so after some, but not all, bytes of b have been updated with data from the input stream. Consequently the input stream and b may be in an inconsistent state. It is strongly recommended that the stream be promptly closed if an I/O error occurs.

Parameters
b ByteArray!: the byte array into which the data is read
off Int: the start offset in b at which the data is written
len Int: the maximum number of bytes to read
Return
Int the actual number of bytes read into the buffer
Exceptions
java.io.IOException if an I/O error occurs
java.lang.NullPointerException if b is null
java.lang.IndexOutOfBoundsException If off is negative, len is negative, or len is greater than b.length - off

reset

Added in API level 1
open fun reset(): Unit

Repositions this stream to the position at the time the mark method was last called on this input stream.

The general contract of reset is:

  • If the method markSupported returns true, then:
    • If the method mark has not been called since the stream was created, or the number of bytes read from the stream since mark was last called is larger than the argument to mark at that last call, then an IOException might be thrown.
    • If such an IOException is not thrown, then the stream is reset to a state such that all the bytes read since the most recent call to mark (or since the start of the file, if mark has not been called) will be resupplied to subsequent callers of the read method, followed by any bytes that otherwise would have been the next input data as of the time of the call to reset.
  • If the method markSupported returns false, then:
    • The call to reset may throw an IOException.
    • If an IOException is not thrown, then the stream is reset to a fixed state that depends on the particular type of the input stream and how it was created. The bytes that will be supplied to subsequent callers of the read method depend on the particular type of the input stream.

The method reset for class InputStream does nothing except throw an IOException.

Exceptions
java.io.IOException if this stream has not been marked or if the mark has been invalidated.

skip

Added in API level 1
open fun skip(n: Long): Long

Skips over and discards n bytes of data from this input stream. The skip method may, for a variety of reasons, end up skipping over some smaller number of bytes, possibly 0. This may result from any of a number of conditions; reaching end of file before n bytes have been skipped is only one possibility. The actual number of bytes skipped is returned. If n is negative, the skip method for class InputStream always returns 0, and no bytes are skipped. Subclasses may handle the negative value differently.

The skip method implementation of this class creates a byte array and then repeatedly reads into it until n bytes have been read or the end of the stream has been reached. Subclasses are encouraged to provide a more efficient implementation of this method. For instance, the implementation may depend on the ability to seek.

Parameters
n Long: the number of bytes to be skipped.
Return
Long the actual number of bytes skipped which might be zero.
Exceptions
java.io.IOException if an I/O error occurs.

skipNBytes

Added in API level 34
open fun skipNBytes(n: Long): Unit

Skips over and discards exactly n bytes of data from this input stream. If n is zero, then no bytes are skipped. If n is negative, then no bytes are skipped. Subclasses may handle the negative value differently.

This method blocks until the requested number of bytes has been skipped, end of file is reached, or an exception is thrown.

If end of stream is reached before the stream is at the desired position, then an EOFException is thrown.

If an I/O error occurs, then the input stream may be in an inconsistent state. It is strongly recommended that the stream be promptly closed if an I/O error occurs.

Parameters
n Long: the number of bytes to be skipped.
Exceptions
java.io.EOFException if end of stream is encountered before the stream can be positioned n bytes beyond its position when this method was invoked.
java.io.IOException if the stream cannot be positioned properly or if an I/O error occurs.

transferTo

Added in API level 33
open fun transferTo(out: OutputStream!): Long

Reads all bytes from this input stream and writes the bytes to the given output stream in the order that they are read. On return, this input stream will be at end of stream. This method does not close either stream.

This method may block indefinitely reading from the input stream, or writing to the output stream. The behavior for the case where the input and/or output stream is asynchronously closed, or the thread interrupted during the transfer, is highly input and output stream specific, and therefore not specified.

If an I/O error occurs reading from the input stream or writing to the output stream, then it may do so after some bytes have been read or written. Consequently the input stream may not be at end of stream and one, or both, streams may be in an inconsistent state. It is strongly recommended that both streams be promptly closed if an I/O error occurs.

Parameters
out OutputStream!: the output stream, non-null
Return
Long the number of bytes transferred
Exceptions
java.io.IOException if an I/O error occurs when reading or writing
java.lang.NullPointerException if out is null