Added in API level 1
Deprecated in API level 1

StringBufferInputStream

open class StringBufferInputStream : InputStream

kotlin.Any
↳	java.io.InputStream
	↳	java.io.StringBufferInputStream

This class allows an application to create an input stream in which the bytes read are supplied by the contents of a string. Applications can also read bytes from a byte array by using a ByteArrayInputStream.

Only the low eight bits of each character in the string are used by this class.

Summary

Public constructors
`StringBufferInputStream(s: String!)` Creates a string input stream to read data from the specified string.

Public methods
open Int	`available()` Returns the number of bytes that can be read from the input stream without blocking.
open Int	`read()` Reads the next byte of data from this input stream.
open Int	`read(b: ByteArray!, off: Int, len: Int)` Reads up to `len` bytes of data from this input stream into an array of bytes.
open Unit	`reset()` Resets the input stream to begin reading from the first character of this input stream's underlying buffer.
open Long	`skip(n: Long)` Skips `n` bytes of input from this input stream.

Inherited functions

From class InputStream

`Unit`	`close()` Closes this input stream and releases any system resources associated with the stream. The `close` method of `InputStream` does nothing.
`Unit`	`mark(readlimit: Int)` Marks the current position in this input stream. A subsequent call to the `reset` method repositions this stream at the last marked position so that subsequent reads re-read the same bytes. The `readlimit` arguments tells this input stream to allow that many bytes to be read before the mark position gets invalidated. The general contract of `mark` is that, if the method `markSupported` returns `true`, the stream somehow remembers all the bytes read after the call to `mark` and stands ready to supply those same bytes again if and whenever the method `reset` is called. However, the stream is not required to remember any data at all if more than `readlimit` bytes are read from the stream before `reset` is called. Marking a closed stream should not have any effect on the stream. The `mark` method of `InputStream` does nothing.
`Boolean`	`markSupported()` Tests if this input stream supports the `mark` and `reset` methods. Whether or not `mark` and `reset` are supported is an invariant property of a particular input stream instance. The `markSupported` method of `InputStream` returns `false`.
`InputStream!`	`nullInputStream()` Returns a new `InputStream` that reads no bytes. The returned stream is initially open. The stream is closed by calling the `close()` method. Subsequent calls to `close()` have no effect. While the stream is open, the `available()`, `read()`, `read(byte[])`, `read(byte[], int, int)`, `readAllBytes()`, `readNBytes(byte[], int, int)`, `readNBytes(int)`, `skip(long)`, `skipNBytes(long)`, and `transferTo()` methods all behave as if end of stream has been reached. After the stream has been closed, these methods all throw `IOException`. The `markSupported()` method returns `false`. The `mark()` method does nothing, and the `reset()` method throws `IOException`.
`Int`	`read(b: ByteArray!)` Reads some number of bytes from the input stream and stores them into the buffer array `b`. The number of bytes actually read is returned as an integer. This method blocks until input data is available, end of file is detected, or an exception is thrown. If the length of `b` is zero, then no bytes are read and `0` is returned; otherwise, there is an attempt to read at least one byte. If no byte is available because the stream is at the end of the file, the value `-1` is returned; otherwise, at least one byte is read and stored into `b`. The first byte read is stored into element `b[0]`, the next one into `b[1]`, and so on. The number of bytes read is, at most, equal to the length of `b`. Let k be the number of bytes actually read; these bytes will be stored in elements `b[0]` through `b[`k`-1]`, leaving elements `b[`k`]` through `b[b.length-1]` unaffected. The `read(b)` method for class `InputStream` has the same effect as: <code>read(b, 0, b.length) </code>
`ByteArray!`	`readAllBytes()` Reads all remaining bytes from the input stream. This method blocks until all remaining bytes have been read and end of stream is detected, or an exception is thrown. This method does not close the input stream. When this stream reaches end of stream, further invocations of this method will return an empty byte array. Note that this method is intended for simple cases where it is convenient to read all bytes into a byte array. It is not intended for reading input streams with large amounts of data. The behavior for the case where the input stream is asynchronously closed, or the thread interrupted during the read, is highly input stream specific, and therefore not specified. If an I/O error occurs reading from the input stream, then it may do so after some, but not all, bytes have been read. Consequently the input stream may not be at end of stream and may be in an inconsistent state. It is strongly recommended that the stream be promptly closed if an I/O error occurs.
`Int`	`readNBytes(b: ByteArray!, off: Int, len: Int)` Reads the requested number of bytes from the input stream into the given byte array. This method blocks until `len` bytes of input data have been read, end of stream is detected, or an exception is thrown. The number of bytes actually read, possibly zero, is returned. This method does not close the input stream. In the case where end of stream is reached before `len` bytes have been read, then the actual number of bytes read will be returned. When this stream reaches end of stream, further invocations of this method will return zero. If `len` is zero, then no bytes are read and `0` is returned; otherwise, there is an attempt to read up to `len` bytes. The first byte read is stored into element `b[off]`, the next one in to `b[off+1]`, and so on. The number of bytes read is, at most, equal to `len`. Let k be the number of bytes actually read; these bytes will be stored in elements `b[off]` through `b[off+`k`-1]`, leaving elements `b[off+`k `]` through `b[off+len-1]` unaffected. The behavior for the case where the input stream is asynchronously closed, or the thread interrupted during the read, is highly input stream specific, and therefore not specified. If an I/O error occurs reading from the input stream, then it may do so after some, but not all, bytes of `b` have been updated with data from the input stream. Consequently the input stream and `b` may be in an inconsistent state. It is strongly recommended that the stream be promptly closed if an I/O error occurs.
`ByteArray!`	`readNBytes(len: Int)` Reads up to a specified number of bytes from the input stream. This method blocks until the requested number of bytes has been read, end of stream is detected, or an exception is thrown. This method does not close the input stream. The length of the returned array equals the number of bytes read from the stream. If `len` is zero, then no bytes are read and an empty byte array is returned. Otherwise, up to `len` bytes are read from the stream. Fewer than `len` bytes may be read if end of stream is encountered. When this stream reaches end of stream, further invocations of this method will return an empty byte array. Note that this method is intended for simple cases where it is convenient to read the specified number of bytes into a byte array. The total amount of memory allocated by this method is proportional to the number of bytes read from the stream which is bounded by `len`. Therefore, the method may be safely called with very large values of `len` provided sufficient memory is available. The behavior for the case where the input stream is asynchronously closed, or the thread interrupted during the read, is highly input stream specific, and therefore not specified. If an I/O error occurs reading from the input stream, then it may do so after some, but not all, bytes have been read. Consequently the input stream may not be at end of stream and may be in an inconsistent state. It is strongly recommended that the stream be promptly closed if an I/O error occurs.
`Unit`	`skipNBytes(n: Long)` Skips over and discards exactly `n` bytes of data from this input stream. If `n` is zero, then no bytes are skipped. If `n` is negative, then no bytes are skipped. Subclasses may handle the negative value differently. This method blocks until the requested number of bytes has been skipped, end of file is reached, or an exception is thrown. If end of stream is reached before the stream is at the desired position, then an `EOFException` is thrown. If an I/O error occurs, then the input stream may be in an inconsistent state. It is strongly recommended that the stream be promptly closed if an I/O error occurs.
`Long`	`transferTo(out: OutputStream!)` Reads all bytes from this input stream and writes the bytes to the given output stream in the order that they are read. On return, this input stream will be at end of stream. This method does not close either stream. This method may block indefinitely reading from the input stream, or writing to the output stream. The behavior for the case where the input and/or output stream is asynchronously closed, or the thread interrupted during the transfer, is highly input and output stream specific, and therefore not specified. If an I/O error occurs reading from the input stream or writing to the output stream, then it may do so after some bytes have been read or written. Consequently the input stream may not be at end of stream and one, or both, streams may be in an inconsistent state. It is strongly recommended that both streams be promptly closed if an I/O error occurs.

Properties
String!	`buffer` The string from which bytes are read.
Int	`count` The number of valid characters in the input stream buffer.
Int	`pos` The index of the next character to read from the input stream buffer.

Public constructors

StringBufferInputStream

Added in API level 1

StringBufferInputStream(s: String!)

Creates a string input stream to read data from the specified string.

Parameters
`s`	String!: the underlying input buffer.

Public methods

available

Added in API level 1

open fun available(): Int

Deprecated: Deprecated in Java.

Returns the number of bytes that can be read from the input stream without blocking.

Return
`Int`	the value of `count - pos`, which is the number of bytes remaining to be read from the input buffer.

Exceptions
`java.io.IOException`	if an I/O error occurs.

read

Added in API level 1

open fun read(): Int

Deprecated: Deprecated in Java.

Reads the next byte of data from this input stream. The value byte is returned as an int in the range 0 to 255. If no byte is available because the end of the stream has been reached, the value -1 is returned.

The read method of StringBufferInputStream cannot block. It returns the low eight bits of the next character in this input stream's buffer.

Return
`Int`	the next byte of data, or `-1` if the end of the stream is reached.

Exceptions
`java.io.IOException`	if an I/O error occurs.

read

Added in API level 1

open fun read(
    b: ByteArray!, 
    off: Int, 
    len: Int
): Int

Deprecated: Deprecated in Java.

Reads up to len bytes of data from this input stream into an array of bytes.

The read method of StringBufferInputStream cannot block. It copies the low eight bits from the characters in this input stream's buffer into the byte array argument.

Parameters
`b`	ByteArray!: the buffer into which the data is read.
`off`	Int: the start offset of the data.
`len`	Int: the maximum number of bytes read.

Return
`Int`	the total number of bytes read into the buffer, or `-1` if there is no more data because the end of the stream has been reached.

Exceptions
`java.io.IOException`	If the first byte cannot be read for any reason other than end of file, or if the input stream has been closed, or if some other I/O error occurs.
`java.lang.NullPointerException`	If `b` is `null`.
`java.lang.IndexOutOfBoundsException`	If `off` is negative, `len` is negative, or `len` is greater than `b.length - off`

reset

Added in API level 1

open fun reset(): Unit

Deprecated: Deprecated in Java.

Resets the input stream to begin reading from the first character of this input stream's underlying buffer.

Exceptions
`java.io.IOException`	if this stream has not been marked or if the mark has been invalidated.

skip

Added in API level 1

open fun skip(n: Long): Long

Deprecated: Deprecated in Java.

Skips n bytes of input from this input stream. Fewer bytes might be skipped if the end of the input stream is reached.

Parameters
`n`	Long: the number of bytes to be skipped.

Return
`Long`	the actual number of bytes skipped.

Exceptions
`java.io.IOException`	if an I/O error occurs.

Properties

buffer

Added in API level 1

protected var buffer: String!

Deprecated: Deprecated in Java.

The string from which bytes are read.

count

Added in API level 1

protected var count: Int

Deprecated: Deprecated in Java.

The number of valid characters in the input stream buffer.

See Also

java.io.StringBufferInputStream#buffer

pos

Added in API level 1

protected var pos: Int

Deprecated: Deprecated in Java.

The index of the next character to read from the input stream buffer.

See Also

java.io.StringBufferInputStream#buffer