Added in API level 23

CarrierConfigManager

open class CarrierConfigManager
kotlin.Any
   ↳ android.telephony.CarrierConfigManager

Provides access to telephony configuration values that are carrier-specific.
Requires the PackageManager#FEATURE_TELEPHONY_SUBSCRIPTION feature which can be detected using PackageManager.hasSystemFeature(String).

Summary

Nested classes

Configs used for APN setup.

This groups the BSF (BootStrapping Function) related configs.

abstract

Listener interface to get a notification when the carrier configurations have changed.

GPS configs.

Configs used by the IMS stack.

Emergency Call/E911.

IMS RTT configs.

Configs used by ImsServiceEntitlement.

IMS SMS configs.

IMS supplementary services configs.

IMS Voice configs.

IMS Video Telephony configs.

WiFi Calling.

Configs used for epdg tunnel bring up.

Constants
static String

This intent is broadcast by the system when carrier config changes.

static Int

Indicates CARRIER_NR_AVAILABILITY_NSA determine that the carrier enable the non-standalone (NSA) mode of 5G NR.

static Int

Indicates CARRIER_NR_AVAILABILITY_SA determine that the carrier enable the standalone (SA) mode of 5G NR.

static Int

Specifies SPN format of displaying carrier name only.

static Int

Specifies SPN format of displaying carrier name along with "Cross-SIM calling".

static Int

Flag indicating that a data cycle threshold should be disabled.

static Int

When KEY_MONTHLY_DATA_CYCLE_DAY_INT, KEY_DATA_LIMIT_THRESHOLD_BYTES_LONG, or KEY_DATA_WARNING_THRESHOLD_BYTES_LONG are set to this value, the platform default value will be used for that key.

static String

Specifies whether the system should prefix the EAP method to the anonymous identity.

static String

ACTION_CARRIER_CONFIG_CHANGED is broadcast once on device bootup and then again when the device is unlocked.

static String

Extra included in ACTION_CARRIER_CONFIG_CHANGED to indicate the slot index that the broadcast is for.

static String

Optional extra included in ACTION_CARRIER_CONFIG_CHANGED to indicate the subscription index that the broadcast is for, if a valid one is available.

static String

Identifies if the key is available for WLAN or EPDG or both.

static String

List of 4 customized 5G SS reference signal received power (SSRSRP) thresholds.

static String

List of 4 customized 5G SS reference signal received quality (SSRSRQ) thresholds.

static String

List of 4 customized 5G SS signal-to-noise and interference ratio (SSSINR) thresholds.

static String

Does not display additional call setting for IMS phone based on GSM Phone

static String

Allow user to add APNs

static String

When true, indicates that adding a call is disabled when there is an ongoing video call or when there is an ongoing call on wifi which was downgraded from video and VoWifi is turned off.

static String

Determines if the current device should allow emergency numbers to be logged in the Call Log.

static String

Flag indicating whether to allow carrier video calls to emergency numbers.

static String

Flag indicating whether or not an ongoing call will be held when an outgoing emergency call is placed.

static String

When true, indicates that video calls can be put on hold in order to swap to another call (e.g. a new outgoing call).

static String

Determine whether we want to play local DTMF tones in a call, or just let the radio/BP handle playing of the tones.

static String

Flag indicating whether the carrier supports merging wifi calls when VoWIFI is disabled.

static String

Determines whether the carrier supports making non-emergency phone calls while the phone is in emergency callback mode.

static String

Whether system apps are allowed to use fallback if carrier video call is not available.

static String

Boolean indicating if show data RAT icon on status bar even when data is disabled.

static String

The default flag specifying whether "Allow alerts" option will be always shown in emergency alerts settings regardless developer options is turned on or not.

static String

Indicates when a carrier has a primary subscription and an opportunistic subscription active, and when Internet data is switched to opportunistic network, whether to still show signal bar of primary network.

static String

Control whether users can edit APNs in Settings.

static String

Default value of APN types field if not specified by user when adding/modifying an APN.

static String

Flag indicating if auto retry is enabled

static String

Specifies the service class for call barring service.

static String

Flag indicating whether or not deactivating all call barring features via the "Call Barring" settings menu is supported.

static String

Flag indicating whether or not changing the call barring password via the "Call Barring" settings menu is supported.

static String

Boolean indicating if the "Call barring" item is visible in the Call Settings menu.

static String

Indicates the carrier server url that serves the call composer picture.

static String

An array containing custom call forwarding number prefixes that will be blocked while the device is reporting that it is roaming.

static String

Specifies a carrier-defined android.telecom.CallRedirectionService which Telecom will bind to for outgoing calls.

static String

Only apply if KEY_ONLY_SINGLE_DC_ALLOWED_INT_ARRAY specifies the network types that support a single data connection at a time.

static String

Flag indicating whether the carrier supports call deflection for an incoming IMS call.

static String

Flag specifying whether IMS service can be turned off.

static String

Determines whether the carrier app needed to be involved when users try to finish setting up the SIM card to get network service.

static String

The Component Name of a carrier-provided CallScreeningService implementation.

static String

Holds the list of carrier certificate hashes, followed by optional package names.

static String

Determines whether any carrier has been identified and its specific config has been applied, default to false.

static String

Specifies a value that identifies the version of the carrier configuration that is currently in use.

static String

Flag specifying whether Cross SIM over IMS should be available for carrier.

static String

Data call setup permanent failure causes by the carrier.

static String

Defines carrier-specific actions which act upon CARRIER_SIGNAL_REQUEST_NETWORK_FAILED and configured signal args: android.

static String

Defines carrier-specific actions which act upon com.

static String

Defines carrier-specific actions which act upon com.

static String

Defines carrier-specific actions which act upon CARRIER_SIGNAL_RESET, used for customization of the default carrier app.

static String

Defines a list of acceptable redirection url for default carrier app.

static String

Default WFC_IMS_enabled: true VoWiFi by default is on false VoWiFi by default is off

static String

Default mode for WFC over IMS on home network:

  • 0: Wi-Fi only
  • 1: prefer mobile network
  • 2: prefer Wi-Fi

static String

Default mode for WFC over IMS on roaming network.

static String

The default flag specifying whether ETWS/CMAS test setting is forcibly disabled in Settings->More->Emergency broadcasts menu even though developer options is turned on.

static String

Flag specifying whether Generic Bootstrapping Architecture capable SIM is required for IMS.

static String

Flag specifying whether IMS instant lettering is available for the carrier.

static String

When IMS instant lettering is available for a carrier (see KEY_CARRIER_INSTANT_LETTERING_AVAILABLE_BOOL), determines the character encoding which will be used when determining the length of messages.

static String

When IMS instant lettering is available for a carrier (see KEY_CARRIER_INSTANT_LETTERING_AVAILABLE_BOOL), determines a list of characters which must be escaped with a backslash '\' character.

static String

When IMS instant lettering is available for a carrier (see KEY_CARRIER_INSTANT_LETTERING_AVAILABLE_BOOL), determines the list of characters which may not be contained in messages.

static String

When IMS instant lettering is available for a carrier (see KEY_CARRIER_INSTANT_LETTERING_AVAILABLE_BOOL), the length limit for messages.

static String

A string array indicating the default APN types that are metered by the carrier.

static String

A string array indicating the default APN types that are roaming-metered by the carrier.

static String

Unconditionally override the carrier name string using #KEY_CARRIER_NAME_STRING.

static String

String to identify carrier name in CarrierConfig app.

static String

A list of carrier nr availability is used to determine whether the carrier enable the non-standalone (NSA) mode of 5G NR, standalone (SA) mode of 5G NR

static String

Indicates whether or not the carrier will provision merged carrier Wi-Fi offload networks.

static String

Flag specifying whether provisioning is required for RCS.

static String

String array containing the list of names for service numbers provided by carriers.

static String

String array containing the list of service numbers provided by carriers.

static String

Flatten android.content.ComponentName of the carrier's settings activity.

static String

Display carrier settings menu if true

static String

Configuration to indicate that the carrier supports opportunistic data auto provisioning.

static String

Flag indicating whether or not the carrier supports Supplementary Services over the UT interface for this subscription.

static String

Flag indicating if the carrier supports tethering of mobile data.

static String

Flag specifying whether IMS should be the first phone attempted for E911 even if the phone is not in service.

static String

Specify the method of selection for UE sending USSD requests.

static String

Flag indicating whether or not the IMS MmTel UT capability requires carrier provisioning before it can be set as enabled.

static String

Flag specifying whether VoLTE should be available for carrier, independent of carrier provisioning.

static String

Flag specifying if WFC provisioning depends on VoLTE provisioning.

static String

This flag specifies whether VoLTE availability is based on provisioning.

static String

Flag specifying whether provisioning is required for VoLTE, Video Telephony, and WiFi Calling.

static String

Flag specifying whether VoLTE TTY is supported.

static String

Flag specifying whether video telephony is available for carrier.

static String

The package name of the carrier's visual voicemail app to ensure that dialer visual voicemail and carrier visual voicemail are not active at the same time.

static String

A list of the carrier's visual voicemail app package names to ensure that dialer visual voicemail and carrier visual voicemail are not active at the same time.

static String

Flag specifying whether WFC over IMS should be available for carrier: independent of carrier provisioning.

static String

Flag specifying whether WFC over IMS supports the "wifi only" option.

static String

For carriers which require an empty flash to be sent before sending the normal 3-way calling flash, the duration in milliseconds of the empty flash to send.

static String

Specifies the amount of gap to be added in millis between postdial DTMF tones.

static String

Override the platform's notion of a network operator being considered non roaming.

static String

The CDMA roaming mode (aka CDMA system select).

static String

Override the platform's notion of a network operator being considered roaming.

static String

Controls the cellular usage setting.

static String

Determines whether we should show a warning asking the user to check with their carrier on pricing when the user enabled data roaming, default to false.

static String

Flag specifying whether an additional (client initiated) intent needs to be sent on System update

static String

Extra to be included in the intent sent for additional action on System update

static String

Value of extra included in intent sent for additional action on System update

static String

Intent to be sent for the additional action on System update

static String

The package name containing the ImsService that will be bound to the telephony framework to support IMS MMTEL feature functionality instead of the device default ImsService for this subscription.

static String

The package name containing the ImsService that will be bound to the telephony framework to support both IMS MMTEL and RCS feature functionality instead of the device default ImsService for this subscription.

static String

The package name containing the ImsService that will be bound to the telephony framework to support IMS RCS feature functionality instead of the device default ImsService for this subscription.

static String

Override the package that will manage SubscriptionPlan information instead of the CarrierService that defines this value.

static String

Flag that specifies to use the user's own phone number as the voicemail number when there is no pre-loaded voicemail number on the SIM card.

static String

Flag to indicate if Wi-Fi needs to be disabled in ECBM.

static String

Indexes of SPN format strings in crossSimSpnFormats.

static String

If this is true, the SIM card (through Customer Service Profile EF file) will be able to prevent manual operator selection.

static String

Controls if the device should automatically notify the user as they reach their cellular data limit.

static String

Controls the cellular data limit.

static String

Controls if the device should automatically notify the user when rapid cellular data usage is observed.

static String

Data switch validation minimal interval, in milliseconds.

static String

Upon data switching between subscriptions within a carrier group, if switch depends on validation result, this value defines customized value of how long we wait for validation success before we fail and revoke the switch.

static String

Controls if the device should automatically notify the user as they reach their cellular data warning.

static String

Controls the data usage warning.

static String

The default sim call manager to use when the default dialer doesn't implement one.

static String

Where there is no preloaded voicemail number on a SIM card, specifies the carrier's default voicemail number while the device is both roaming and not registered for IMS.

static String

Where there is no preloaded voicemail number on a SIM card, specifies the carrier's default voicemail number.

static String

Specifies a map from dialstrings to replacements for roaming network service numbers which cannot be replaced on the carrier side.

static String

Disables dialing "*228" (OTASP provisioning) on CDMA carriers where it is not supported or is potentially harmful by locking the SIM to 3G.

static String

The flag to disable the popup dialog which warns the user of data charges.

static String

Boolean indicating the Supplementary Services(SS) is disable when airplane mode on in the Call Settings menu.

static String

DisconnectCause array to play busy tone.

static String

Determine whether or not to display a call strength indicator for this carrier in the System UI.

static String

Determines whether High Definition audio property is displayed in the dialer UI.

static String

When true, if the user is in an ongoing video call over WIFI and answers an incoming audio call, the video call will be disconnected before the audio call is answered.

static String

Flag indicating if dtmf tone type is enabled

static String

The duration in seconds that platform call and message blocking is disabled after the user contacts emergency services.

static String

Determine whether user can toggle Enhanced 4G LTE Mode in Settings.

static String

Since the default voicemail number is empty, if a SIM card does not have a voicemail number available the user cannot use voicemail.

static String

Determine whether user can edit voicemail number in Settings.

static String

Determine whether user can switch Wi-Fi preferred or Cellular preferred in calling preference.

static String

Determine whether user can change Wi-Fi Calling preference in roaming.

static String

Time delay (in ms) after which we show the notification for emergency calls, while the device is registered over WFC.

static String

Indicates zero or more emergency number prefix(es), because some carrier requires if users dial an emergency number address with a specific prefix, the combination of the prefix and the address is also a valid emergency number to dial.

static String

Flag specifying whether cross sim calling on opportunistic data is supported for carrier.

static String

If true, enable vibration (haptic feedback) for key presses in the EmergencyDialer activity.

static String

Sets the default state for the "Enhanced 4G LTE" or "Advanced Calling" mode toggle set by the user.

static String

The index indicates the carrier specified title string of Enhanced 4G LTE Mode settings.

static String

This timer value is used in the eSIM Exponential Backoff download retry algorithm.

static String

If eSIM profile download fails then, the number of retry attempts by UE will be based on this configuration.

static String

Override the platform's notion of a network operator being considered non roaming.

static String

Specifies the amount of gap to be added in millis between postdial DTMF tones.

static String

Override the platform's notion of a network operator being considered not roaming.

static String

Override the platform's notion of a network operator being considered roaming.

static String

Determines if device implements a noise suppression device for in call audio.

static String

Control whether users can reach the carrier portions of Cellular Network Settings.

static String

Determines whether the Enhanced 4G LTE toggle will be shown in the settings.

static String

Determine whether IMS apn can be shown.

static String

Boolean indicating if LTE+ icon should be shown if available.

static String

Determine whether preferred network type can be shown.

static String

Flag to hide Preset APN details.

static String

Control whether users can reach the SIM lock settings.

static String

Indicates if the TTY HCO and VCO options should be hidden in the accessibility menu if the device is capable of RTT.

static String

When true, changes to the mobile data enabled switch will not cause the VT registration state to change.

static String

When true, the phone will always tell the IMS stack to keep RTT enabled and determine on a per-call basis (based on extras from the dialer app) whether a call should be an RTT call or not.

static String

Flag indicating whether the Phone app should ignore EVENT_SIM_NETWORK_LOCKED events from the Sim.

static String

Determines the maximum number of participants the carrier supports for a conference call.

static String

Specifies the amount of gap to be added in millis between DTMF tones.

static String

Indicating whether to include LTE cell bandwidths when determining whether the aggregated cell bandwidth meets the required threshold for NR advanced.

static String

Determines whether a maximum size limit for IMS conference calls is enforced on the device.

static String

A boolean property indicating whether this subscription should be managed as an opportunistic subscription.

static String

Boolean to decide whether LTE is enabled.

static String

A list of 4 customized LTE Reference Signal Received Quality (RSRQ) thresholds.

static String

A list of 4 customized LTE Reference Signal Signal to Noise Ratio (RSSNR) thresholds.

static String

When checking if a given number is the voicemail number, if this flag is true then in addition to comparing the given number to the voicemail number, we also compare it to the mdn.

static String

static String

static String

static String

static String

static String

If true, add "Connection: close" header to MMS HTTP requests so the connection is immediately closed (disabling keep-alive).

static String

static String

static String

static String

static String

static String

static String

static String

static String

static String

static String

static String

static String

static String

Waiting time in milliseconds used before releasing an MMS data call.

static String

static String

static String

static String

static String

static String

static String

static String

static String

static String

static String

static String

static String

static String

The day of the month (1-31) on which the data cycle rolls over.

static String

Only allow auto selection in Advanced Network Settings when in home network.

static String

List of network type constants which support only a single data connection at a time.

static String

Control whether users can choose a network operator.

static String

Controls back off time in milli seconds for switching back to opportunistic subscription.

static String

Controls hysteresis time in milli seconds for which OpportunisticNetworkService will wait before switching data from opportunistic network to primary network.

static String

Controls hysteresis time in milli seconds for which OpportunisticNetworkService will wait before switching data to an opportunistic network.

static String

Controls hysteresis time in milli seconds for which OpportunisticNetworkService will wait before attaching to a network.

static String

Controls bandwidth threshold in Kbps at which OpportunisticNetworkService will decide whether the opportunistic network is good enough for internet data.

static String

Controls RSRP threshold, in dBm, at which OpportunisticNetworkService will decide whether the opportunistic network is good enough for internet data.

static String

Controls RSSNR threshold, in dB, at which OpportunisticNetworkService will decide whether the opportunistic network is good enough for internet data.

static String

Controls RSRP threshold, in dBm, below which OpportunisticNetworkService will decide whether the opportunistic network available is not good enough for internet data.

static String

Controls RSSNR threshold, in dB, below which OpportunisticNetworkService will decide whether the opportunistic network available is not good enough for internet data.

static String

Controls the max back off time in milli seconds for switching back to opportunistic subscription.

static String

Controls the ping pong determination of opportunistic network.

static String

Controls whether to do ping test before switching data to opportunistic network.

static String

Used in the Preferred Network Types menu to determine if the 2G option is displayed.

static String

The maximum number of times in a day that we display the notification for a performance boost via premium capabilities when TelephonyManager#purchasePremiumCapability(int, Executor, Consumer) returns a failure due to user action or timeout.

static String

The maximum number of times in a month that we display the notification for a performance boost via premium capabilities when TelephonyManager#purchasePremiumCapability(int, Executor, Consumer) returns a failure due to user action or timeout.

static String

The amount of time in milliseconds within which the network must set up a slicing configuration for the premium capability after TelephonyManager#purchasePremiumCapability(int, Executor, Consumer) returns TelephonyManager#PURCHASE_PREMIUM_CAPABILITY_RESULT_SUCCESS.

static String

The amount of time in milliseconds that the notification for a performance boost via premium capabilities should be blocked when TelephonyManager#purchasePremiumCapability(int, Executor, Consumer) returns a failure due to user action or timeout.

static String

The amount of time in milliseconds the notification for a performance boost via premium capabilities will be visible to the user after TelephonyManager#purchasePremiumCapability(int, Executor, Consumer) requests user action to purchase the boost from the carrier.

static String

The amount of time in milliseconds that the purchase request should be throttled when TelephonyManager#purchasePremiumCapability(int, Executor, Consumer) returns a failure due to the carrier.

static String

The URL to redirect to when the user clicks on the notification for a performance boost via premium capabilities after applications call TelephonyManager#purchasePremiumCapability(int, Executor, Consumer).

static String

Whether to allow premium capabilities to be purchased when the device is connected to LTE.

static String

Flag specifying whether to prevent sending CLIR activation("*31#") and deactivation("#31#") code only without dialing number.

static String

A list of failure cause codes that will trigger a modem restart when telephony receiving one of those during data setup.

static String

Indicating whether to ratchet the aggregated cell bandwidths on receiving new values when the device is in RRC IDLE mode.

static String

The RCS configuration server URL.

static String

APN fields that user is not allowed to modify.

static String

APN types that user is not allowed to modify.

static String

Flag to require or skip entitlement checks.

static String

Flag indicating whether radio is to be restarted on error PDP_FAIL_REGULAR_DEACTIVATION This is false by default.

static String

Indicates if the carrier supports auto-upgrading a call to RTT when receiving a call from a RTT-supported device.

static String

Indicates if the carrier supports downgrading a RTT call to a voice call during the call.

static String

Flag indicating whether the carrier supports RTT over IMS.

static String

Indicates if the carrier supports RTT during a video call.

static String

Indicates whether RTT is supported while roaming.

static String

Indicates if the carrier supports upgrading a voice call to an RTT call during the call.

static String

Indicates if the carrier supports upgrading a call that was previously a VT call to RTT.

static String

Boolean indicating if default data account should show 4G icon when in 3G.

static String

Boolean indicating if default data account should show LTE or 4G icon.

static String

Show APN Settings for some CDMA carriers

static String

Flag specifying whether to show blocking pay phone option in blocked numbers screen.

static String

Flag specifying whether to show notification(call blocking disabled) when Enhanced Call Blocking(KEY_SUPPORT_ENHANCED_CALL_BLOCKING_BOOL) is enabled and making emergency call.

static String

Show cdma network mode choices 1x, 3G, global etc.

static String

Flag specifying whether to show forwarded number on call-in-progress screen.

static String

Flag specifying whether ICCID is showed in SIM Status screen, default to false.

static String

Flag specifying whether IMS registration state menu is shown in Status Info setting, default to false.

static String

If true, show an onscreen "Dial" button in the dialer.

static String

Config to show the roaming indicator (i.e. the "R" icon) from the status bar when roaming.

static String

Flag specifying whether the android.telephony.SignalStrength is shown in the SIM Status screen.

static String

Flag specifying whether to show an alert dialog for video call charges.

static String

Determines whether wifi calling location privacy policy is shown.

static String

Control whether users receive a simplified network settings UI and improved network selection.

static String

String to override sim country iso.

static String

Flag indicating whether the Phone app should provide a "Dismiss" button on the SIM network unlock screen.

static String

SMDP+ server address for downloading opportunistic eSIM profile.

static String

Determines if the carrier requires converting the destination number before sending out an SMS.

static String

The UUID of a Group of related subscriptions in which to place the current subscription.

static String

A list of premium capabilities the carrier supports.

static String

Indicates if the carrier supports call composer.

static String

Indicates whether the carrier supports the use of DTMF digits A-D for the purpose of device to device communication while in a call.

static String

Indicates whether the carrier supports the use of RFC8285 compliant RTP header extensions for the purpose of device to device communication while in a call.

static String

Indicates whether the carrier supports the negotiations of RFC8285 compliant RTP header extensions supported on a call during the Session Description Protocol (SDP).

static String

Indicates whether the carrier supports 3gpp call forwarding MMI codes while roaming.

static String

Determines whether conference participants can be added to existing call to form an adhoc conference call (in contrast to merging calls to form a conference).

static String

Determines whether adhoc conference calls are supported by a carrier.

static String

Flag indicating whether to support "Network default" option in Caller ID settings for Calling Line Identification Restriction (CLIR).

static String

Determines whether conference calls are supported by a carrier.

static String

Flag indicating whether or not sending emergency SMS messages over IMS is supported when in LTE/limited LTE (Emergency only) service mode.

static String

Determines whether to enable enhanced call blocking feature on the device.

static String

Determines whether the IMS conference merge process supports and returns its participants data.

static String

For IMS video over LTE calls, determines whether video pause signalling is supported.

static String

After a CDMA conference call is merged, the swap button should be displayed.

static String

Boolean to decide whether TD-SCDMA is supported.

static String

A list of mcc/mnc that support TD-SCDMA for device when connect to the roaming network.

static String

Controls whether to switch data to primary from opportunistic subscription if primary is out of service.

static String

Flag indicating whether some telephony logic will treat a call which was formerly a video call as if it is still a video call.

static String

Boolean flag indicating whether the carrier supports TTY.

static String

A string array containing numbers that shouldn't be included in the call log.

static String

Indicates if auto-configuration server is used for the RCS config Reference: GSMA RCC.

static String

CDMA activation goes through HFA

static String

Determines whether or not to use (IP) data connectivity as a supplemental condition to control the visibility of the no-calling indicator for this carrier in the System UI.

static String

CDMA activation goes through OTASP.

static String

Flag indicating whether or not the carrier supports the periodic exchange of phone numbers in the user's address book with the carrier's presence server in order to retrieve the RCS capabilities for each contact used in the RCS User Capability Exchange (UCE) procedure.

static String

Flag indicating whether the carrier supports RCS SIP OPTIONS indication for User Capability Exchange (UCE).

static String

Flag specifying whether the carrier will use the WFC home network mode in roaming network.

static String

Determine whether the voicemail notification is persistent in the notification bar.

static String

If true, removes the Voice Privacy option from Call Settings

static String

If Voice Radio Technology is RIL_RADIO_TECHNOLOGY_LTE:14 or RIL_RADIO_TECHNOLOGY_UNKNOWN:0 this is the value that should be used instead.

static String

Flag specifying whether VoNR should be enabled for carrier.

static String

Boolean indicating the default VoNR user preference setting.

static String

Boolean indicating if the VoNR setting is visible in the Call Settings menu.

static String

Indicates if the carrier supports upgrading a call that was previously an RTT call to VT.

static String

Whether cellular data is required to access visual voicemail.

static String

The default OMTP visual voicemail client prefix to use.

static String

The carrier number mobile outgoing (MO) sms messages are sent to.

static String

A set of capabilities that should not be used even if it is reported by the visual voicemail IMAP CAPABILITY command.

static String

Whether legacy mode should be used when the visual voicemail client is disabled.

static String

The port through which the mobile outgoing (MO) sms messages are sent through.

static String

Whether to prefetch audio data on new voicemail arrival, defaulted to true.

static String

Whether to use SSL to connect to the visual voicemail IMAP server.

static String

The type of visual voicemail protocol the carrier adheres to.

static String

The Component Name of the activity that can setup the emergency address for WiFi Calling as per carrier requirement.

static String

Boolean to decide whether world mode is enabled.

static String

Flag indicating if the phone is a world phone

static String

Passing this value as KEY_SUBSCRIPTION_GROUP_UUID_STRING will remove the subscription from a group instead of adding it to a group.

static Int

Service class flag if no specific service class is specified.

static Int

Service class flag for voice telephony.

static Int

Only send USSD over CS.

static Int

Only send USSD over IMS while CS is out of service, otherwise send USSD over CS.

static Int

Only send USSD over IMS and disallow silent redial over CS.

static Int

Send USSD over IMS or CS while IMS is out of service or silent redial over CS if needed.

Public methods
open PersistableBundle?

Gets the configuration values for the default subscription.

open PersistableBundle
getConfig(vararg keys: String!)

Gets the configuration values of the specified config keys applied for the default subscription.

open PersistableBundle?

Gets the configuration values for a component using its prefix.

open PersistableBundle?

Gets the configuration values for a particular subscription, which is associated with a specific SIM card.

open PersistableBundle
getConfigForSubId(subId: Int, vararg keys: String!)

Gets the configuration values of the specified keys for a particular subscription.

open static Boolean

Determines whether a configuration PersistableBundle obtained from getConfig() or getConfigForSubId(int) corresponds to an identified carrier.

open Unit

Calling this method triggers telephony services to fetch the current carrier configuration.

open Unit

Register a CarrierConfigChangeListener to get a notification when carrier configurations have changed.

open Unit

Unregister the CarrierConfigChangeListener to stop notification on carrier configurations change.

Constants

ACTION_CARRIER_CONFIG_CHANGED

Added in API level 23
static val ACTION_CARRIER_CONFIG_CHANGED: String

This intent is broadcast by the system when carrier config changes. An int is specified in EXTRA_SLOT_INDEX to indicate the slot index that this is for. An optional int extra EXTRA_SUBSCRIPTION_INDEX is included to indicate the subscription index if a valid one is available for the slot index. An optional int extra TelephonyManager#EXTRA_CARRIER_ID is included to indicate the carrier id for the changed carrier configuration. An optional int extra TelephonyManager#EXTRA_SPECIFIC_CARRIER_ID is included to indicate the precise carrier id for the changed carrier configuration.

Value: "android.telephony.action.CARRIER_CONFIG_CHANGED"

CARRIER_NR_AVAILABILITY_NSA

Added in API level 31
static val CARRIER_NR_AVAILABILITY_NSA: Int

Indicates CARRIER_NR_AVAILABILITY_NSA determine that the carrier enable the non-standalone (NSA) mode of 5G NR.

Value: 1

CARRIER_NR_AVAILABILITY_SA

Added in API level 31
static val CARRIER_NR_AVAILABILITY_SA: Int

Indicates CARRIER_NR_AVAILABILITY_SA determine that the carrier enable the standalone (SA) mode of 5G NR.

Value: 2

CROSS_SIM_SPN_FORMAT_CARRIER_NAME_ONLY

Added in API level 31
static val CROSS_SIM_SPN_FORMAT_CARRIER_NAME_ONLY: Int

Specifies SPN format of displaying carrier name only.

Value: 0

CROSS_SIM_SPN_FORMAT_CARRIER_NAME_WITH_BRANDING

Added in API level 31
static val CROSS_SIM_SPN_FORMAT_CARRIER_NAME_WITH_BRANDING: Int

Specifies SPN format of displaying carrier name along with "Cross-SIM calling".

Value: 1

DATA_CYCLE_THRESHOLD_DISABLED

Added in API level 26
static val DATA_CYCLE_THRESHOLD_DISABLED: Int

Flag indicating that a data cycle threshold should be disabled.

If KEY_DATA_WARNING_THRESHOLD_BYTES_LONG is set to this value, the platform's default data warning, if one exists, will be disabled. A user selected data warning will not be overridden.

If KEY_DATA_LIMIT_THRESHOLD_BYTES_LONG is set to this value, the platform's default data limit, if one exists, will be disabled. A user selected data limit will not be overridden.

Value: -2

DATA_CYCLE_USE_PLATFORM_DEFAULT

Added in API level 30
static val DATA_CYCLE_USE_PLATFORM_DEFAULT: Int

When KEY_MONTHLY_DATA_CYCLE_DAY_INT, KEY_DATA_LIMIT_THRESHOLD_BYTES_LONG, or KEY_DATA_WARNING_THRESHOLD_BYTES_LONG are set to this value, the platform default value will be used for that key.

Value: -1

ENABLE_EAP_METHOD_PREFIX_BOOL

Added in API level 30
static val ENABLE_EAP_METHOD_PREFIX_BOOL: String

Specifies whether the system should prefix the EAP method to the anonymous identity. The following prefix will be added if this key is set to TRUE: EAP-AKA: "0" EAP-SIM: "1" EAP-AKA_PRIME: "6"

Value: "enable_eap_method_prefix_bool"

EXTRA_REBROADCAST_ON_UNLOCK

Added in API level 31
static val EXTRA_REBROADCAST_ON_UNLOCK: String

ACTION_CARRIER_CONFIG_CHANGED is broadcast once on device bootup and then again when the device is unlocked. Direct-Boot-aware applications may use the first broadcast as an early signal that the carrier config has been loaded, but other applications will only receive the second broadcast, when the device is unlocked. This extra is included in ACTION_CARRIER_CONFIG_CHANGED to indicate whether this is a rebroadcast on unlock.

Value: "android.telephony.extra.REBROADCAST_ON_UNLOCK"

EXTRA_SLOT_INDEX

Added in API level 28
static val EXTRA_SLOT_INDEX: String

Extra included in ACTION_CARRIER_CONFIG_CHANGED to indicate the slot index that the broadcast is for.

Value: "android.telephony.extra.SLOT_INDEX"

EXTRA_SUBSCRIPTION_INDEX

Added in API level 28
static val EXTRA_SUBSCRIPTION_INDEX: String

Optional extra included in ACTION_CARRIER_CONFIG_CHANGED to indicate the subscription index that the broadcast is for, if a valid one is available.

Value: "android.telephony.extra.SUBSCRIPTION_INDEX"

IMSI_KEY_AVAILABILITY_INT

Added in API level 30
static val IMSI_KEY_AVAILABILITY_INT: String

Identifies if the key is available for WLAN or EPDG or both. The value is a bitmask. 0 indicates that neither EPDG or WLAN is enabled. 1 indicates that key type TelephonyManager#KEY_TYPE_EPDG is enabled. 2 indicates that key type TelephonyManager#KEY_TYPE_WLAN is enabled. 3 indicates that both are enabled.

Value: "imsi_key_availability_int"

KEY_5G_NR_SSRSRP_THRESHOLDS_INT_ARRAY

Added in API level 30
static val KEY_5G_NR_SSRSRP_THRESHOLDS_INT_ARRAY: String

List of 4 customized 5G SS reference signal received power (SSRSRP) thresholds.

Reference: 3GPP TS 38.215

4 threshold integers must be within the boundaries [-140 dB, -44 dB], and the levels are:

  • "NONE: [-140, threshold1)"
  • "POOR: [threshold1, threshold2)"
  • "MODERATE: [threshold2, threshold3)"
  • "GOOD: [threshold3, threshold4)"
  • "EXCELLENT: [threshold4, -44]"

This key is considered invalid if the format is violated. If the key is invalid or not configured, a default value set will apply.

Value: "5g_nr_ssrsrp_thresholds_int_array"

KEY_5G_NR_SSRSRQ_THRESHOLDS_INT_ARRAY

Added in API level 30
static val KEY_5G_NR_SSRSRQ_THRESHOLDS_INT_ARRAY: String

List of 4 customized 5G SS reference signal received quality (SSRSRQ) thresholds.

Reference: 3GPP TS 38.215; 3GPP TS 38.133 section 10

4 threshold integers must be within the boundaries [-43 dB, 20 dB], and the levels are:

  • "NONE: [-43, threshold1)"
  • "POOR: [threshold1, threshold2)"
  • "MODERATE: [threshold2, threshold3)"
  • "GOOD: [threshold3, threshold4)"
  • "EXCELLENT: [threshold4, 20]"

This key is considered invalid if the format is violated. If the key is invalid or not configured, a default value set will apply.

Value: "5g_nr_ssrsrq_thresholds_int_array"

KEY_5G_NR_SSSINR_THRESHOLDS_INT_ARRAY

Added in API level 30
static val KEY_5G_NR_SSSINR_THRESHOLDS_INT_ARRAY: String

List of 4 customized 5G SS signal-to-noise and interference ratio (SSSINR) thresholds.

Reference: 3GPP TS 38.215, 3GPP TS 38.133 10.1.16.1

4 threshold integers must be within the boundaries [-23 dB, 40 dB], and the levels are:

  • "NONE: [-23, threshold1)"
  • "POOR: [threshold1, threshold2)"
  • "MODERATE: [threshold2, threshold3)"
  • "GOOD: [threshold3, threshold4)"
  • "EXCELLENT: [threshold4, 40]"

This key is considered invalid if the format is violated. If the key is invalid or not configured, a default value set will apply.

Value: "5g_nr_sssinr_thresholds_int_array"

KEY_ADDITIONAL_CALL_SETTING_BOOL

Added in API level 23
static val KEY_ADDITIONAL_CALL_SETTING_BOOL: String

Does not display additional call setting for IMS phone based on GSM Phone

Value: "additional_call_setting_bool"

KEY_ALLOW_ADDING_APNS_BOOL

Added in API level 24
static val KEY_ALLOW_ADDING_APNS_BOOL: String

Allow user to add APNs

Value: "allow_adding_apns_bool"

KEY_ALLOW_ADD_CALL_DURING_VIDEO_CALL_BOOL

Added in API level 25
static val KEY_ALLOW_ADD_CALL_DURING_VIDEO_CALL_BOOL: String

When true, indicates that adding a call is disabled when there is an ongoing video call or when there is an ongoing call on wifi which was downgraded from video and VoWifi is turned off.

Value: "allow_add_call_during_video_call"

KEY_ALLOW_EMERGENCY_NUMBERS_IN_CALL_LOG_BOOL

Added in API level 23
static val KEY_ALLOW_EMERGENCY_NUMBERS_IN_CALL_LOG_BOOL: String

Determines if the current device should allow emergency numbers to be logged in the Call Log. (Some carriers require that emergency calls *not* be logged, presumably to avoid the risk of accidental redialing from the call log UI. This is a good idea, so the default here is false.)

Value: "allow_emergency_numbers_in_call_log_bool"

KEY_ALLOW_EMERGENCY_VIDEO_CALLS_BOOL

Added in API level 24
static val KEY_ALLOW_EMERGENCY_VIDEO_CALLS_BOOL: String

Flag indicating whether to allow carrier video calls to emergency numbers. When true, video calls to emergency numbers will be allowed. When false, video calls to emergency numbers will be initiated as audio-only calls instead.

Value: "allow_emergency_video_calls_bool"

KEY_ALLOW_HOLD_CALL_DURING_EMERGENCY_BOOL

Added in API level 30
static val KEY_ALLOW_HOLD_CALL_DURING_EMERGENCY_BOOL: String

Flag indicating whether or not an ongoing call will be held when an outgoing emergency call is placed. If true, ongoing calls will be put on hold when an emergency call is placed. If false, placing an emergency call will trigger the disconnect of all ongoing calls before the emergency call is placed.

Value: "allow_hold_call_during_emergency_bool"

KEY_ALLOW_HOLD_VIDEO_CALL_BOOL

Added in API level 30
static val KEY_ALLOW_HOLD_VIDEO_CALL_BOOL: String

When true, indicates that video calls can be put on hold in order to swap to another call (e.g. a new outgoing call). When false, indicates that video calls will be disconnected when swapping to another call.

This is true by default.

Value: "allow_hold_video_call_bool"

KEY_ALLOW_LOCAL_DTMF_TONES_BOOL

Added in API level 23
static val KEY_ALLOW_LOCAL_DTMF_TONES_BOOL: String

Determine whether we want to play local DTMF tones in a call, or just let the radio/BP handle playing of the tones.

Value: "allow_local_dtmf_tones_bool"

KEY_ALLOW_MERGE_WIFI_CALLS_WHEN_VOWIFI_OFF_BOOL

Added in API level 25
static val KEY_ALLOW_MERGE_WIFI_CALLS_WHEN_VOWIFI_OFF_BOOL: String

Flag indicating whether the carrier supports merging wifi calls when VoWIFI is disabled. This can happen in the case of a carrier which allows offloading video calls to WIFI separately of whether voice over wifi is enabled. In such a scenario when two video calls are downgraded to voice, they remain over wifi. However, if VoWIFI is disabled, these calls cannot be merged.

Value: "allow_merge_wifi_calls_when_vowifi_off_bool"

KEY_ALLOW_NON_EMERGENCY_CALLS_IN_ECM_BOOL

Added in API level 24
static val KEY_ALLOW_NON_EMERGENCY_CALLS_IN_ECM_BOOL: String

Determines whether the carrier supports making non-emergency phone calls while the phone is in emergency callback mode. Default value is true, meaning that non-emergency calls are allowed in emergency callback mode.

Value: "allow_non_emergency_calls_in_ecm_bool"

KEY_ALLOW_VIDEO_CALLING_FALLBACK_BOOL

Added in API level 30
static val KEY_ALLOW_VIDEO_CALLING_FALLBACK_BOOL: String

Whether system apps are allowed to use fallback if carrier video call is not available. Defaults to true.

Value: "allow_video_calling_fallback_bool"

KEY_ALWAYS_SHOW_DATA_RAT_ICON_BOOL

Added in API level 30
static val KEY_ALWAYS_SHOW_DATA_RAT_ICON_BOOL: String

Boolean indicating if show data RAT icon on status bar even when data is disabled.

Value: "always_show_data_rat_icon_bool"

KEY_ALWAYS_SHOW_EMERGENCY_ALERT_ONOFF_BOOL

Added in API level 24
Deprecated in API level 30
static val KEY_ALWAYS_SHOW_EMERGENCY_ALERT_ONOFF_BOOL: String

Deprecated: The allow alerts option is always shown now. No longer need a config for that.

The default flag specifying whether "Allow alerts" option will be always shown in emergency alerts settings regardless developer options is turned on or not.

Value: "always_show_emergency_alert_onoff_bool"

KEY_ALWAYS_SHOW_PRIMARY_SIGNAL_BAR_IN_OPPORTUNISTIC_NETWORK_BOOLEAN

Added in API level 30
static val KEY_ALWAYS_SHOW_PRIMARY_SIGNAL_BAR_IN_OPPORTUNISTIC_NETWORK_BOOLEAN: String

Indicates when a carrier has a primary subscription and an opportunistic subscription active, and when Internet data is switched to opportunistic network, whether to still show signal bar of primary network. By default it will be false, meaning whenever data is going over opportunistic network, signal bar will reflect signal strength and rat icon of that network.

Value: "always_show_primary_signal_bar_in_opportunistic_network_boolean"

KEY_APN_EXPAND_BOOL

Added in API level 23
static val KEY_APN_EXPAND_BOOL: String

Control whether users can edit APNs in Settings.

Value: "apn_expand_bool"

KEY_APN_SETTINGS_DEFAULT_APN_TYPES_STRING_ARRAY

Added in API level 30
static val KEY_APN_SETTINGS_DEFAULT_APN_TYPES_STRING_ARRAY: String

Default value of APN types field if not specified by user when adding/modifying an APN.

Value: "apn_settings_default_apn_types_string_array"

KEY_AUTO_RETRY_ENABLED_BOOL

Added in API level 23
static val KEY_AUTO_RETRY_ENABLED_BOOL: String

Flag indicating if auto retry is enabled

Value: "auto_retry_enabled_bool"

KEY_CALL_BARRING_DEFAULT_SERVICE_CLASS_INT

Added in API level 31
static val KEY_CALL_BARRING_DEFAULT_SERVICE_CLASS_INT: String

Specifies the service class for call barring service. Default value is SERVICE_CLASS_VOICE. The value set as below:

Value: "call_barring_default_service_class_int"

KEY_CALL_BARRING_SUPPORTS_DEACTIVATE_ALL_BOOL

Added in API level 29
static val KEY_CALL_BARRING_SUPPORTS_DEACTIVATE_ALL_BOOL: String

Flag indicating whether or not deactivating all call barring features via the "Call Barring" settings menu is supported. If true, the option will be visible in the "Call Barring" settings menu. If false, the option will not be visible. Enabled by default.

Value: "call_barring_supports_deactivate_all_bool"

KEY_CALL_BARRING_SUPPORTS_PASSWORD_CHANGE_BOOL

Added in API level 29
static val KEY_CALL_BARRING_SUPPORTS_PASSWORD_CHANGE_BOOL: String

Flag indicating whether or not changing the call barring password via the "Call Barring" settings menu is supported. If true, the option will be visible in the "Call Barring" settings menu. If false, the option will not be visible. Enabled by default.

Value: "call_barring_supports_password_change_bool"

KEY_CALL_BARRING_VISIBILITY_BOOL

Added in API level 29
static val KEY_CALL_BARRING_VISIBILITY_BOOL: String

Boolean indicating if the "Call barring" item is visible in the Call Settings menu. If true, the "Call Barring" menu will be visible. If false, the menu will be gone. Disabled by default.

Value: "call_barring_visibility_bool"

KEY_CALL_COMPOSER_PICTURE_SERVER_URL_STRING

Added in API level 31
static val KEY_CALL_COMPOSER_PICTURE_SERVER_URL_STRING: String

Indicates the carrier server url that serves the call composer picture.

Value: "call_composer_picture_server_url_string"

KEY_CALL_FORWARDING_BLOCKS_WHILE_ROAMING_STRING_ARRAY

Added in API level 26
static val KEY_CALL_FORWARDING_BLOCKS_WHILE_ROAMING_STRING_ARRAY: String

An array containing custom call forwarding number prefixes that will be blocked while the device is reporting that it is roaming. By default, there are no custom call forwarding prefixes and none of these numbers will be filtered. If one or more entries are present, the system will not complete the call and display an error message. To display a message to the user when call forwarding fails for 3gpp MMI codes while roaming, use the KEY_SUPPORT_3GPP_CALL_FORWARDING_WHILE_ROAMING_BOOL option instead.

Value: "call_forwarding_blocks_while_roaming_string_array"

KEY_CALL_REDIRECTION_SERVICE_COMPONENT_NAME_STRING

Added in API level 30
static val KEY_CALL_REDIRECTION_SERVICE_COMPONENT_NAME_STRING: String

Specifies a carrier-defined android.telecom.CallRedirectionService which Telecom will bind to for outgoing calls. An empty string indicates that no carrier-defined android.telecom.CallRedirectionService is specified.

Value: "call_redirection_service_component_name_string"

KEY_CAPABILITIES_EXEMPT_FROM_SINGLE_DC_CHECK_INT_ARRAY

Added in API level 34
static val KEY_CAPABILITIES_EXEMPT_FROM_SINGLE_DC_CHECK_INT_ARRAY: String

Only apply if KEY_ONLY_SINGLE_DC_ALLOWED_INT_ARRAY specifies the network types that support a single data connection at a time. This key defines a list of network capabilities which, if requested, will exempt the request from single data connection checks.

Value: "capabilities_exempt_from_single_dc_check_int_array"

KEY_CARRIER_ALLOW_DEFLECT_IMS_CALL_BOOL

Added in API level 30
static val KEY_CARRIER_ALLOW_DEFLECT_IMS_CALL_BOOL: String

Flag indicating whether the carrier supports call deflection for an incoming IMS call.

Value: "carrier_allow_deflect_ims_call_bool"

KEY_CARRIER_ALLOW_TURNOFF_IMS_BOOL

Added in API level 23
static val KEY_CARRIER_ALLOW_TURNOFF_IMS_BOOL: String

Flag specifying whether IMS service can be turned off. If false then the service will not be turned-off completely, but individual features can be disabled.

Value: "carrier_allow_turnoff_ims_bool"

KEY_CARRIER_APP_REQUIRED_DURING_SIM_SETUP_BOOL

Added in API level 30
static val KEY_CARRIER_APP_REQUIRED_DURING_SIM_SETUP_BOOL: String

Determines whether the carrier app needed to be involved when users try to finish setting up the SIM card to get network service.

Value: "carrier_app_required_during_setup_bool"

KEY_CARRIER_CALL_SCREENING_APP_STRING

Added in API level 29
static val KEY_CARRIER_CALL_SCREENING_APP_STRING: String

The Component Name of a carrier-provided CallScreeningService implementation. Telecom will bind to android.telecom.CallScreeningService for ALL incoming calls and provide the carrier CallScreeningService with the opportunity to allow or block calls.

The String includes the package name/the class name. Example: com.android.carrier/com.android.carrier.callscreeningserviceimpl

Using ComponentName#flattenToString() to convert a ComponentName object to String. Using ComponentName#unflattenFromString(String) to convert a String object to a ComponentName.

Value: "call_screening_app"

KEY_CARRIER_CERTIFICATE_STRING_ARRAY

Added in API level 30
static val KEY_CARRIER_CERTIFICATE_STRING_ARRAY: String

Holds the list of carrier certificate hashes, followed by optional package names. Format: "sha1/256" or "sha1/256:package1,package2,package3..." Note that each carrier has its own hashes.

Value: "carrier_certificate_string_array"

KEY_CARRIER_CONFIG_APPLIED_BOOL

Added in API level 30
static val KEY_CARRIER_CONFIG_APPLIED_BOOL: String

Determines whether any carrier has been identified and its specific config has been applied, default to false.

Value: "carrier_config_applied_bool"

KEY_CARRIER_CONFIG_VERSION_STRING

Added in API level 29
static val KEY_CARRIER_CONFIG_VERSION_STRING: String

Specifies a value that identifies the version of the carrier configuration that is currently in use. This string is displayed on the UI. The format of the string is not specified.

Value: "carrier_config_version_string"

KEY_CARRIER_CROSS_SIM_IMS_AVAILABLE_BOOL

Added in API level 31
static val KEY_CARRIER_CROSS_SIM_IMS_AVAILABLE_BOOL: String

Flag specifying whether Cross SIM over IMS should be available for carrier. When false the carrier does not support cross SIM calling. When true the carrier does support cross sim calling, where available

Value: "carrier_cross_sim_ims_available_bool"

KEY_CARRIER_DATA_CALL_PERMANENT_FAILURE_STRINGS

Added in API level 26
Deprecated in API level 34
static val KEY_CARRIER_DATA_CALL_PERMANENT_FAILURE_STRINGS: String

Deprecated: This API key was added in mistake and is not used anymore by the telephony data frameworks.

Data call setup permanent failure causes by the carrier.

Value: "carrier_data_call_permanent_failure_strings"

KEY_CARRIER_DEFAULT_ACTIONS_ON_DCFAILURE_STRING_ARRAY

Added in API level 30
static val KEY_CARRIER_DEFAULT_ACTIONS_ON_DCFAILURE_STRING_ARRAY: String

Defines carrier-specific actions which act upon CARRIER_SIGNAL_REQUEST_NETWORK_FAILED and configured signal args: android.telephony.TelephonyManager#EXTRA_APN_TYPE, android.telephony.TelephonyManager#EXTRA_ERROR_CODE used for customization of the default carrier app Format: { "APN_1, ERROR_CODE_1 : CARRIER_ACTION_IDX_1, CARRIER_ACTION_IDX_2...", "APN_1, ERROR_CODE_2 : CARRIER_ACTION_IDX_1 " } Where APN_1 is an integer defined in android.telephony.data.ApnSetting (e.g. android.telephony.data.ApnSetting#TYPE_DEFAULT ERROR_CODE_1 is an integer defined in android.telephony.DataFailCause Example: android.telephony.DataFailCause#MISSING_UNKNOWN_APN CARRIER_ACTION_IDX_1 is an integer defined in com.android.carrierdefaultapp.CarrierActionUtils Example: com.android.carrierdefaultapp.CarrierActionUtils#CARRIER_ACTION_DISABLE_METERED_APNS disables metered APNs

Value: "carrier_default_actions_on_dcfailure_string_array"

KEY_CARRIER_DEFAULT_ACTIONS_ON_DEFAULT_NETWORK_AVAILABLE

Added in API level 30
static val KEY_CARRIER_DEFAULT_ACTIONS_ON_DEFAULT_NETWORK_AVAILABLE: String

Defines carrier-specific actions which act upon com.android.internal.telephony.CARRIER_SIGNAL_DEFAULT_NETWORK_AVAILABLE, used for customization of the default carrier app. Format: { "true : CARRIER_ACTION_IDX_1", "false: CARRIER_ACTION_IDX_2" } Where true is a boolean indicates default network available/unavailable Where CARRIER_ACTION_IDX is an integer defined in com.android.carrierdefaultapp.CarrierActionUtils CarrierActionUtils Example: com.android.carrierdefaultapp.CarrierActionUtils#CARRIER_ACTION_ENABLE_DEFAULT_URL_HANDLER enables the app as the default URL handler

Value: "carrier_default_actions_on_default_network_available_string_array"

KEY_CARRIER_DEFAULT_ACTIONS_ON_REDIRECTION_STRING_ARRAY

Added in API level 30
static val KEY_CARRIER_DEFAULT_ACTIONS_ON_REDIRECTION_STRING_ARRAY: String

Defines carrier-specific actions which act upon com.android.internal.telephony.CARRIER_SIGNAL_REDIRECTED, used for customization of the default carrier app. Format: "CARRIER_ACTION_IDX, ..." Where CARRIER_ACTION_IDX is an integer defined in com.android.carrierdefaultapp.CarrierActionUtils Example: com.android.carrierdefaultapp.CarrierActionUtils#CARRIER_ACTION_DISABLE_METERED_APNS disables metered APNs

Value: "carrier_default_actions_on_redirection_string_array"

KEY_CARRIER_DEFAULT_ACTIONS_ON_RESET

Added in API level 30
static val KEY_CARRIER_DEFAULT_ACTIONS_ON_RESET: String

Defines carrier-specific actions which act upon CARRIER_SIGNAL_RESET, used for customization of the default carrier app. Format: "CARRIER_ACTION_IDX, ..." Where CARRIER_ACTION_IDX is an integer defined in com.android.carrierdefaultapp.CarrierActionUtils Example: com.android.carrierdefaultapp.CarrierActionUtils#CARRIER_ACTION_CANCEL_ALL_NOTIFICATIONS clears all notifications on reset

Value: "carrier_default_actions_on_reset_string_array"

KEY_CARRIER_DEFAULT_REDIRECTION_URL_STRING_ARRAY

Added in API level 30
static val KEY_CARRIER_DEFAULT_REDIRECTION_URL_STRING_ARRAY: String

Defines a list of acceptable redirection url for default carrier app.

Value: "carrier_default_redirection_url_string_array"

KEY_CARRIER_DEFAULT_WFC_IMS_ENABLED_BOOL

Added in API level 30
static val KEY_CARRIER_DEFAULT_WFC_IMS_ENABLED_BOOL: String

Default WFC_IMS_enabled: true VoWiFi by default is on false VoWiFi by default is off

Value: "carrier_default_wfc_ims_enabled_bool"

KEY_CARRIER_DEFAULT_WFC_IMS_MODE_INT

Added in API level 29
static val KEY_CARRIER_DEFAULT_WFC_IMS_MODE_INT: String

Default mode for WFC over IMS on home network:

  • 0: Wi-Fi only
  • 1: prefer mobile network
  • 2: prefer Wi-Fi

Value: "carrier_default_wfc_ims_mode_int"

KEY_CARRIER_DEFAULT_WFC_IMS_ROAMING_MODE_INT

Added in API level 29
static val KEY_CARRIER_DEFAULT_WFC_IMS_ROAMING_MODE_INT: String

Default mode for WFC over IMS on roaming network. See KEY_CARRIER_DEFAULT_WFC_IMS_MODE_INT for meaning of values.

Value: "carrier_default_wfc_ims_roaming_mode_int"

KEY_CARRIER_FORCE_DISABLE_ETWS_CMAS_TEST_BOOL

Added in API level 24
Deprecated in API level 30
static val KEY_CARRIER_FORCE_DISABLE_ETWS_CMAS_TEST_BOOL: String

Deprecated: Use com.android.cellbroadcastreceiver.CellBroadcastReceiver resource show_test_settings to control whether to show test alert settings or not.

The default flag specifying whether ETWS/CMAS test setting is forcibly disabled in Settings->More->Emergency broadcasts menu even though developer options is turned on.

Value: "carrier_force_disable_etws_cmas_test_bool"

KEY_CARRIER_IMS_GBA_REQUIRED_BOOL

Added in API level 24
static val KEY_CARRIER_IMS_GBA_REQUIRED_BOOL: String

Flag specifying whether Generic Bootstrapping Architecture capable SIM is required for IMS.

Value: "carrier_ims_gba_required_bool"

KEY_CARRIER_INSTANT_LETTERING_AVAILABLE_BOOL

Added in API level 24
static val KEY_CARRIER_INSTANT_LETTERING_AVAILABLE_BOOL: String

Flag specifying whether IMS instant lettering is available for the carrier. True if instant lettering is available for the carrier, false otherwise.

Value: "carrier_instant_lettering_available_bool"

KEY_CARRIER_INSTANT_LETTERING_ENCODING_STRING

Added in API level 24
static val KEY_CARRIER_INSTANT_LETTERING_ENCODING_STRING: String

When IMS instant lettering is available for a carrier (see KEY_CARRIER_INSTANT_LETTERING_AVAILABLE_BOOL), determines the character encoding which will be used when determining the length of messages. Used in the InCall UI to limit the number of characters the user may type. If empty-string, the instant lettering message size limit will be enforced on a 1:1 basis. That is, each character will count towards the messages size limit as a single byte. If a character encoding is specified, the message size limit will be based on the number of bytes in the message per the specified encoding.

Value: "carrier_instant_lettering_encoding_string"

KEY_CARRIER_INSTANT_LETTERING_ESCAPED_CHARS_STRING

Added in API level 24
static val KEY_CARRIER_INSTANT_LETTERING_ESCAPED_CHARS_STRING: String

When IMS instant lettering is available for a carrier (see KEY_CARRIER_INSTANT_LETTERING_AVAILABLE_BOOL), determines a list of characters which must be escaped with a backslash '\' character. Should be specified as a string containing the characters to be escaped. For example to escape quote and backslash the string would be a quote and a backslash.

Value: "carrier_instant_lettering_escaped_chars_string"

KEY_CARRIER_INSTANT_LETTERING_INVALID_CHARS_STRING

Added in API level 24
static val KEY_CARRIER_INSTANT_LETTERING_INVALID_CHARS_STRING: String

When IMS instant lettering is available for a carrier (see KEY_CARRIER_INSTANT_LETTERING_AVAILABLE_BOOL), determines the list of characters which may not be contained in messages. Should be specified as a regular expression suitable for use with String#matches(String).

Value: "carrier_instant_lettering_invalid_chars_string"

KEY_CARRIER_INSTANT_LETTERING_LENGTH_LIMIT_INT

Added in API level 24
static val KEY_CARRIER_INSTANT_LETTERING_LENGTH_LIMIT_INT: String

When IMS instant lettering is available for a carrier (see KEY_CARRIER_INSTANT_LETTERING_AVAILABLE_BOOL), the length limit for messages. Used in the InCall UI to ensure the user cannot enter more characters than allowed by the carrier. See also KEY_CARRIER_INSTANT_LETTERING_ENCODING_STRING for more information on how the length of the message is calculated.

Value: "carrier_instant_lettering_length_limit_int"

KEY_CARRIER_NAME_OVERRIDE_BOOL

Added in API level 28
static val KEY_CARRIER_NAME_OVERRIDE_BOOL: String

Unconditionally override the carrier name string using #KEY_CARRIER_NAME_STRING. If true, then the carrier name string will be #KEY_CARRIER_NAME_STRING, unconditionally.

If false, then the override will be performed conditionally and the #KEY_CARRIER_NAME_STRING will have the lowest-precedence; it will only be used in the event that the name string would otherwise be empty, allowing it to serve as a last-resort. If used, this value functions in place of the SPN on any/all ICC records for the corresponding subscription.

Value: "carrier_name_override_bool"

KEY_CARRIER_NAME_STRING

Added in API level 28
static val KEY_CARRIER_NAME_STRING: String

String to identify carrier name in CarrierConfig app. This string overrides SPN if #KEY_CARRIER_NAME_OVERRIDE_BOOL is true; otherwise, it will be used if its value is provided and SPN is unavailable

Value: "carrier_name_string"

KEY_CARRIER_NR_AVAILABILITIES_INT_ARRAY

Added in API level 31
static val KEY_CARRIER_NR_AVAILABILITIES_INT_ARRAY: String

A list of carrier nr availability is used to determine whether the carrier enable the non-standalone (NSA) mode of 5G NR, standalone (SA) mode of 5G NR

The value of list is CARRIER_NR_AVAILABILITY_NSA, or CARRIER_NR_AVAILABILITY_SA.

For example, if both NSA and SA are used, the list value is { CARRIER_NR_AVAILABILITY_NSA,CARRIER_NR_AVAILABILITY_SA}. If the carrier doesn't support 5G NR, the value is the empty array. If the key is invalid or not configured, the default value { CARRIER_NR_AVAILABILITY_NSA,CARRIER_NR_AVAILABILITY_SA} will apply.

Value: "carrier_nr_availabilities_int_array"

KEY_CARRIER_PROVISIONS_WIFI_MERGED_NETWORKS_BOOL

Added in API level 31
static val KEY_CARRIER_PROVISIONS_WIFI_MERGED_NETWORKS_BOOL: String

Indicates whether or not the carrier will provision merged carrier Wi-Fi offload networks. Such networks are considered part of the core carrier network. This configuration will be use to gate whether such configurations are allowed to the carrier and correspondingly enable UI elements which are required for such configurations.

Value: "carrier_provisions_wifi_merged_networks_bool"

KEY_CARRIER_RCS_PROVISIONING_REQUIRED_BOOL

Added in API level 30
static val KEY_CARRIER_RCS_PROVISIONING_REQUIRED_BOOL: String

Flag specifying whether provisioning is required for RCS.

Value: "carrier_rcs_provisioning_required_bool"

KEY_CARRIER_SERVICE_NAME_STRING_ARRAY

Added in API level 34
static val KEY_CARRIER_SERVICE_NAME_STRING_ARRAY: String

String array containing the list of names for service numbers provided by carriers. This key should be used with KEY_CARRIER_SERVICE_NUMBER_STRING_ARRAY. The names provided in this array will be mapped 1:1 with the numbers provided in the KEY_CARRIER_SERVICE_NUMBER_STRING_ARRAY array.

The data would be considered valid if and only if:

Example:

<code>&lt;string-array name="carrier_service_name_array" num="2"&gt;
    &lt;item value="Police"/&gt;
    &lt;item value="Ambulance"/&gt;
  &lt;/string-array&gt;
  </code>
Value: "carrier_service_name_array"

KEY_CARRIER_SERVICE_NUMBER_STRING_ARRAY

Added in API level 34
static val KEY_CARRIER_SERVICE_NUMBER_STRING_ARRAY: String

String array containing the list of service numbers provided by carriers. This key should be used with KEY_CARRIER_SERVICE_NAME_STRING_ARRAY. The numbers provided in this array will be mapped 1:1 with the names provided in the KEY_CARRIER_SERVICE_NAME_STRING_ARRAY array.

The data would be considered valid if and only if:

  • The number of items in both the arrays are equal
  • The item should contain dialable characters only which includes 0-9, -, *, #, (, ), SPACE.

Example:

<code>&lt;string-array name="carrier_service_number_array" num="2"&gt;
    &lt;item value="*123"/&gt;
    &lt;item value="+ (111) 111-111"/&gt;
  &lt;/string-array&gt;
  </code>
Value: "carrier_service_number_array"

KEY_CARRIER_SETTINGS_ACTIVITY_COMPONENT_NAME_STRING

Added in API level 30
static val KEY_CARRIER_SETTINGS_ACTIVITY_COMPONENT_NAME_STRING: String

Flatten android.content.ComponentName of the carrier's settings activity.

Value: "carrier_settings_activity_component_name_string"

KEY_CARRIER_SETTINGS_ENABLE_BOOL

Added in API level 23
static val KEY_CARRIER_SETTINGS_ENABLE_BOOL: String

Display carrier settings menu if true

Value: "carrier_settings_enable_bool"

KEY_CARRIER_SUPPORTS_OPP_DATA_AUTO_PROVISIONING_BOOL

Added in API level 33
static val KEY_CARRIER_SUPPORTS_OPP_DATA_AUTO_PROVISIONING_BOOL: String

Configuration to indicate that the carrier supports opportunistic data auto provisioning. Based on this flag, the device downloads and activates corresponding opportunistic profile.

Value: "carrier_supports_opp_data_auto_provisioning_bool"

KEY_CARRIER_SUPPORTS_SS_OVER_UT_BOOL

Added in API level 29
static val KEY_CARRIER_SUPPORTS_SS_OVER_UT_BOOL: String

Flag indicating whether or not the carrier supports Supplementary Services over the UT interface for this subscription. If true, the device will use Supplementary Services over UT when provisioned (see KEY_CARRIER_UT_PROVISIONING_REQUIRED_BOOL). If false, this device will fallback to circuit switch for supplementary services and will disable this capability for IMS entirely. The default value for this key is false.

Value: "carrier_supports_ss_over_ut_bool"

KEY_CARRIER_SUPPORTS_TETHERING_BOOL

Added in API level 33
static val KEY_CARRIER_SUPPORTS_TETHERING_BOOL: String

Flag indicating if the carrier supports tethering of mobile data.

Value: "carrier_supports_tethering_bool"

KEY_CARRIER_USE_IMS_FIRST_FOR_EMERGENCY_BOOL

Added in API level 24
static val KEY_CARRIER_USE_IMS_FIRST_FOR_EMERGENCY_BOOL: String

Flag specifying whether IMS should be the first phone attempted for E911 even if the phone is not in service.

Value: "carrier_use_ims_first_for_emergency_bool"

KEY_CARRIER_USSD_METHOD_INT

Added in API level 31
static val KEY_CARRIER_USSD_METHOD_INT: String

Specify the method of selection for UE sending USSD requests. The default value is USSD_OVER_CS_PREFERRED.

Available options:

Value: "carrier_ussd_method_int"

KEY_CARRIER_UT_PROVISIONING_REQUIRED_BOOL

Added in API level 29
Deprecated in API level 33
static val KEY_CARRIER_UT_PROVISIONING_REQUIRED_BOOL: String

Deprecated: Use Ims#KEY_MMTEL_REQUIRES_PROVISIONING_BUNDLE instead for determining if UT requires provisioning.

Flag indicating whether or not the IMS MmTel UT capability requires carrier provisioning before it can be set as enabled. If true, the UT capability will be set to false for the newly loaded subscription and will require the carrier provisioning app to set the persistent provisioning result. If false, the platform will not wait for provisioning status updates for the UT capability and enable the UT over IMS capability for the subscription when the subscription is loaded. The default value for this key is false.

Value: "carrier_ut_provisioning_required_bool"

KEY_CARRIER_VOLTE_AVAILABLE_BOOL

Added in API level 23
static val KEY_CARRIER_VOLTE_AVAILABLE_BOOL: String

Flag specifying whether VoLTE should be available for carrier, independent of carrier provisioning. If false: hard disabled. If true: then depends on carrier provisioning, availability, etc.

Value: "carrier_volte_available_bool"

KEY_CARRIER_VOLTE_OVERRIDE_WFC_PROVISIONING_BOOL

Added in API level 30
static val KEY_CARRIER_VOLTE_OVERRIDE_WFC_PROVISIONING_BOOL: String

Flag specifying if WFC provisioning depends on VoLTE provisioning. false: default value; honor actual WFC provisioning state. true: when VoLTE is not provisioned, treat WFC as not provisioned; when VoLTE is provisioned, honor actual WFC provisioning state. As of now, Verizon is the only carrier enforcing this dependency in their WFC awareness and activation requirements.

Value: "carrier_volte_override_wfc_provisioning_bool"

KEY_CARRIER_VOLTE_PROVISIONED_BOOL

Added in API level 26
Deprecated in API level 33
static val KEY_CARRIER_VOLTE_PROVISIONED_BOOL: String

Deprecated: Use Ims#KEY_CARRIER_RCS_PROVISIONING_REQUIRED_BOOL instead.

This flag specifies whether VoLTE availability is based on provisioning. By default this is false. Used for UCE to determine if EAB provisioning checks should be based on provisioning.

Value: "carrier_volte_provisioned_bool"

KEY_CARRIER_VOLTE_PROVISIONING_REQUIRED_BOOL

Added in API level 23
Deprecated in API level 33
static val KEY_CARRIER_VOLTE_PROVISIONING_REQUIRED_BOOL: String

Deprecated: Use Ims#KEY_MMTEL_REQUIRES_PROVISIONING_BUNDLE instead for finer-grained control. changing carrier_volte_provisioning_required_bool requires changes to mmtel_requires_provisioning_bundle and vice versa Ims#KEY_MMTEL_REQUIRES_PROVISIONING_BUNDLE

Flag specifying whether provisioning is required for VoLTE, Video Telephony, and WiFi Calling. Combines VoLTE, VT, VoWiFI calling provisioning into one parameter.

Value: "carrier_volte_provisioning_required_bool"

KEY_CARRIER_VOLTE_TTY_SUPPORTED_BOOL

Added in API level 23
static val KEY_CARRIER_VOLTE_TTY_SUPPORTED_BOOL: String

Flag specifying whether VoLTE TTY is supported.

Value: "carrier_volte_tty_supported_bool"

KEY_CARRIER_VT_AVAILABLE_BOOL

Added in API level 23
static val KEY_CARRIER_VT_AVAILABLE_BOOL: String

Flag specifying whether video telephony is available for carrier. If false: hard disabled. If true: then depends on carrier provisioning, availability, etc.

Value: "carrier_vt_available_bool"

KEY_CARRIER_VVM_PACKAGE_NAME_STRING

Added in API level 23
Deprecated in API level 26
static val KEY_CARRIER_VVM_PACKAGE_NAME_STRING: String

Deprecated: use KEY_CARRIER_VVM_PACKAGE_NAME_STRING_ARRAY.

The package name of the carrier's visual voicemail app to ensure that dialer visual voicemail and carrier visual voicemail are not active at the same time.

Value: "carrier_vvm_package_name_string"

KEY_CARRIER_VVM_PACKAGE_NAME_STRING_ARRAY

Added in API level 26
static val KEY_CARRIER_VVM_PACKAGE_NAME_STRING_ARRAY: String

A list of the carrier's visual voicemail app package names to ensure that dialer visual voicemail and carrier visual voicemail are not active at the same time.

Value: "carrier_vvm_package_name_string_array"

KEY_CARRIER_WFC_IMS_AVAILABLE_BOOL

Added in API level 23
static val KEY_CARRIER_WFC_IMS_AVAILABLE_BOOL: String

Flag specifying whether WFC over IMS should be available for carrier: independent of carrier provisioning. If false: hard disabled. If true: then depends on carrier provisioning, availability etc.

Value: "carrier_wfc_ims_available_bool"

KEY_CARRIER_WFC_SUPPORTS_WIFI_ONLY_BOOL

Added in API level 24
static val KEY_CARRIER_WFC_SUPPORTS_WIFI_ONLY_BOOL: String

Flag specifying whether WFC over IMS supports the "wifi only" option. If false, the wifi calling settings will not include an option for "wifi only". If true, the wifi calling settings will include an option for "wifi only"

By default, it is assumed that WFC supports "wifi only".

Value: "carrier_wfc_supports_wifi_only_bool"

KEY_CDMA_3WAYCALL_FLASH_DELAY_INT

Added in API level 26
static val KEY_CDMA_3WAYCALL_FLASH_DELAY_INT: String

For carriers which require an empty flash to be sent before sending the normal 3-way calling flash, the duration in milliseconds of the empty flash to send. When 0, no empty flash is sent.

Value: "cdma_3waycall_flash_delay_int"

KEY_CDMA_DTMF_TONE_DELAY_INT

Added in API level 24
static val KEY_CDMA_DTMF_TONE_DELAY_INT: String

Specifies the amount of gap to be added in millis between postdial DTMF tones. When a non-zero value is specified, the UE shall wait for the specified amount of time before it sends out successive DTMF tones on the network.

Value: "cdma_dtmf_tone_delay_int"

KEY_CDMA_NONROAMING_NETWORKS_STRING_ARRAY

Added in API level 23
static val KEY_CDMA_NONROAMING_NETWORKS_STRING_ARRAY: String

Override the platform's notion of a network operator being considered non roaming. Value is string array of SIDs to be considered not roaming for 3GPP2 RATs.

Value: "cdma_nonroaming_networks_string_array"

KEY_CDMA_ROAMING_MODE_INT

Added in API level 28
static val KEY_CDMA_ROAMING_MODE_INT: String

The CDMA roaming mode (aka CDMA system select).

The value should be one of the CDMA_ROAMING_MODE_ constants in TelephonyManager. Values other than TelephonyManager#CDMA_ROAMING_MODE_RADIO_DEFAULT (which is the default) will take precedence over user selection.

Value: "cdma_roaming_mode_int"

KEY_CDMA_ROAMING_NETWORKS_STRING_ARRAY

Added in API level 23
static val KEY_CDMA_ROAMING_NETWORKS_STRING_ARRAY: String

Override the platform's notion of a network operator being considered roaming. Value is string array of SIDs to be considered roaming for 3GPP2 RATs.

Value: "cdma_roaming_networks_string_array"

KEY_CELLULAR_USAGE_SETTING_INT

Added in API level 33
static val KEY_CELLULAR_USAGE_SETTING_INT: String

Controls the cellular usage setting. The usage setting indicates whether a device will remain attached to a network based on the primary use case for the service. A device will detach and search for a more-preferred network if the primary use case (voice or data) is not satisfied. Depending on the type of device, it may operate in a voice or data-centric mode by default.

Sets the usage setting in accordance with 3gpp 24.301 sec 4.3 and 3gpp 24.501 sec 4.3. Also refer to "UE's usage setting" as defined in 3gpp 24.301 section 3.1 and 3gpp 23.221 Annex A. Either omit this key or pass a value of unknown to preserve the current setting.

Devices that support configuration of the cellular usage setting, including devices with HAL capability to set the cellular usage setting, must honor this setting accordingly. default, voice-centric, or data-centric. {@see SubscriptionInfo#getUsageSetting}

Value: "cellular_usage_setting_int"

KEY_CHECK_PRICING_WITH_CARRIER_FOR_DATA_ROAMING_BOOL

Added in API level 30
static val KEY_CHECK_PRICING_WITH_CARRIER_FOR_DATA_ROAMING_BOOL: String

Determines whether we should show a warning asking the user to check with their carrier on pricing when the user enabled data roaming, default to false.

Value: "check_pricing_with_carrier_data_roaming_bool"

KEY_CI_ACTION_ON_SYS_UPDATE_BOOL

Added in API level 24
static val KEY_CI_ACTION_ON_SYS_UPDATE_BOOL: String

Flag specifying whether an additional (client initiated) intent needs to be sent on System update

Value: "ci_action_on_sys_update_bool"

KEY_CI_ACTION_ON_SYS_UPDATE_EXTRA_STRING

Added in API level 24
static val KEY_CI_ACTION_ON_SYS_UPDATE_EXTRA_STRING: String

Extra to be included in the intent sent for additional action on System update

Value: "ci_action_on_sys_update_extra_string"

KEY_CI_ACTION_ON_SYS_UPDATE_EXTRA_VAL_STRING

Added in API level 24
static val KEY_CI_ACTION_ON_SYS_UPDATE_EXTRA_VAL_STRING: String

Value of extra included in intent sent for additional action on System update

Value: "ci_action_on_sys_update_extra_val_string"

KEY_CI_ACTION_ON_SYS_UPDATE_INTENT_STRING

Added in API level 24
static val KEY_CI_ACTION_ON_SYS_UPDATE_INTENT_STRING: String

Intent to be sent for the additional action on System update

Value: "ci_action_on_sys_update_intent_string"

KEY_CONFIG_IMS_MMTEL_PACKAGE_OVERRIDE_STRING

Added in API level 30
static val KEY_CONFIG_IMS_MMTEL_PACKAGE_OVERRIDE_STRING: String

The package name containing the ImsService that will be bound to the telephony framework to support IMS MMTEL feature functionality instead of the device default ImsService for this subscription.

Value: "config_ims_mmtel_package_override_string"

KEY_CONFIG_IMS_PACKAGE_OVERRIDE_STRING

Added in API level 26
Deprecated in API level 30
static val KEY_CONFIG_IMS_PACKAGE_OVERRIDE_STRING: String

Deprecated: Use KEY_CONFIG_IMS_MMTEL_PACKAGE_OVERRIDE_STRING and KEY_CONFIG_IMS_RCS_PACKAGE_OVERRIDE_STRING instead to configure these values separately. If any of those values are not empty, they will override this value.

The package name containing the ImsService that will be bound to the telephony framework to support both IMS MMTEL and RCS feature functionality instead of the device default ImsService for this subscription.

Value: "config_ims_package_override_string"

KEY_CONFIG_IMS_RCS_PACKAGE_OVERRIDE_STRING

Added in API level 30
static val KEY_CONFIG_IMS_RCS_PACKAGE_OVERRIDE_STRING: String

The package name containing the ImsService that will be bound to the telephony framework to support IMS RCS feature functionality instead of the device default ImsService for this subscription.

Value: "config_ims_rcs_package_override_string"

KEY_CONFIG_PLANS_PACKAGE_OVERRIDE_STRING

Added in API level 28
static val KEY_CONFIG_PLANS_PACKAGE_OVERRIDE_STRING: String

Override the package that will manage SubscriptionPlan information instead of the CarrierService that defines this value.

Value: "config_plans_package_override_string"

KEY_CONFIG_TELEPHONY_USE_OWN_NUMBER_FOR_VOICEMAIL_BOOL

Added in API level 28
static val KEY_CONFIG_TELEPHONY_USE_OWN_NUMBER_FOR_VOICEMAIL_BOOL: String

Flag that specifies to use the user's own phone number as the voicemail number when there is no pre-loaded voicemail number on the SIM card.

KEY_DEFAULT_VM_NUMBER_STRING takes precedence over this flag.

If false, the system default (*86) will be used instead.

Value: "config_telephony_use_own_number_for_voicemail_bool"

KEY_CONFIG_WIFI_DISABLE_IN_ECBM

Added in API level 30
static val KEY_CONFIG_WIFI_DISABLE_IN_ECBM: String

Flag to indicate if Wi-Fi needs to be disabled in ECBM.

Value: "config_wifi_disable_in_ecbm"

KEY_CROSS_SIM_SPN_FORMAT_INT

Added in API level 31
static val KEY_CROSS_SIM_SPN_FORMAT_INT: String

Indexes of SPN format strings in crossSimSpnFormats.

Available options are:

%s will be filled with carrier name
Value: "cross_sim_spn_format_int"

KEY_CSP_ENABLED_BOOL

Added in API level 23
static val KEY_CSP_ENABLED_BOOL: String

If this is true, the SIM card (through Customer Service Profile EF file) will be able to prevent manual operator selection. If false, this SIM setting will be ignored and manual operator selection will always be available. See CPHS4_2.WW6, CPHS B.4.7.1 for more information

Value: "csp_enabled_bool"

KEY_DATA_LIMIT_NOTIFICATION_BOOL

Added in API level 30
static val KEY_DATA_LIMIT_NOTIFICATION_BOOL: String

Controls if the device should automatically notify the user as they reach their cellular data limit. When set to false the carrier is expected to have implemented their own notification mechanism. true by default.

Value: "data_limit_notification_bool"

KEY_DATA_LIMIT_THRESHOLD_BYTES_LONG

Added in API level 26
static val KEY_DATA_LIMIT_THRESHOLD_BYTES_LONG: String

Controls the cellular data limit.

If the user uses more than this amount of data in their billing cycle, as defined by KEY_MONTHLY_DATA_CYCLE_DAY_INT, cellular data will be turned off by the user's phone. If the value is set to DATA_CYCLE_THRESHOLD_DISABLED, the data limit will be disabled.

This setting may be overridden by explicit user choice. By default, DATA_CYCLE_USE_PLATFORM_DEFAULT will be used.

Value: "data_limit_threshold_bytes_long"

KEY_DATA_RAPID_NOTIFICATION_BOOL

Added in API level 30
static val KEY_DATA_RAPID_NOTIFICATION_BOOL: String

Controls if the device should automatically notify the user when rapid cellular data usage is observed. When set to false the carrier is expected to have implemented their own notification mechanism. true by default.

Value: "data_rapid_notification_bool"

KEY_DATA_SWITCH_VALIDATION_MIN_INTERVAL_MILLIS_LONG

Added in API level 34
static val KEY_DATA_SWITCH_VALIDATION_MIN_INTERVAL_MILLIS_LONG: String

Data switch validation minimal interval, in milliseconds. If a connection to the default (Internet) PDN for the current subscription is validated on a given operator within a given tracking area, re-validations to that matching operator will be skipped if they would occur within the specified interval. Instead, the connection will automatically considered validated. If the network was validated within the interval but the latest validation result was false, the validation will not be skipped. If not set or set to 0, validation will not be skipped. The valid range of value is between 0 millisecond and 24 hours, inclusive in both sides. The default value is 24 hours.

Value: "data_switch_validation_min_gap_long"

KEY_DATA_SWITCH_VALIDATION_TIMEOUT_LONG

Added in API level 30
static val KEY_DATA_SWITCH_VALIDATION_TIMEOUT_LONG: String

Upon data switching between subscriptions within a carrier group, if switch depends on validation result, this value defines customized value of how long we wait for validation success before we fail and revoke the switch. Time out is in milliseconds.

Value: "data_switch_validation_timeout_long"

KEY_DATA_WARNING_NOTIFICATION_BOOL

Added in API level 30
static val KEY_DATA_WARNING_NOTIFICATION_BOOL: String

Controls if the device should automatically notify the user as they reach their cellular data warning. When set to false the carrier is expected to have implemented their own notification mechanism. true by default.

Value: "data_warning_notification_bool"

KEY_DATA_WARNING_THRESHOLD_BYTES_LONG

Added in API level 26
static val KEY_DATA_WARNING_THRESHOLD_BYTES_LONG: String

Controls the data usage warning.

If the user uses more than this amount of data in their billing cycle, as defined by KEY_MONTHLY_DATA_CYCLE_DAY_INT, the user will be alerted about the usage. If the value is set to DATA_CYCLE_THRESHOLD_DISABLED, the data usage warning will be disabled.

This setting may be overridden by explicit user choice. By default, DATA_CYCLE_USE_PLATFORM_DEFAULT will be used.

Value: "data_warning_threshold_bytes_long"

KEY_DEFAULT_SIM_CALL_MANAGER_STRING

Added in API level 23
static val KEY_DEFAULT_SIM_CALL_MANAGER_STRING: String

The default sim call manager to use when the default dialer doesn't implement one. A sim call manager can control and route outgoing and incoming phone calls, even if they're placed using another connection service (PSTN, for example).

Value: "default_sim_call_manager_string"

KEY_DEFAULT_VM_NUMBER_ROAMING_AND_IMS_UNREGISTERED_STRING

Added in API level 30
static val KEY_DEFAULT_VM_NUMBER_ROAMING_AND_IMS_UNREGISTERED_STRING: String

Where there is no preloaded voicemail number on a SIM card, specifies the carrier's default voicemail number while the device is both roaming and not registered for IMS. When empty string, no default voicemail number is specified for roaming network and unregistered state in IMS.

Value: "default_vm_number_roaming_and_ims_unregistered_string"

KEY_DEFAULT_VM_NUMBER_STRING

Added in API level 26
static val KEY_DEFAULT_VM_NUMBER_STRING: String

Where there is no preloaded voicemail number on a SIM card, specifies the carrier's default voicemail number. When empty string, no default voicemail number is specified.

Value: "default_vm_number_string"

KEY_DIAL_STRING_REPLACE_STRING_ARRAY

Added in API level 26
static val KEY_DIAL_STRING_REPLACE_STRING_ARRAY: String

Specifies a map from dialstrings to replacements for roaming network service numbers which cannot be replaced on the carrier side.

Individual entries have the format: [dialstring to replace]:[replacement]

Value: "dial_string_replace_string_array"

KEY_DISABLE_CDMA_ACTIVATION_CODE_BOOL

Added in API level 23
static val KEY_DISABLE_CDMA_ACTIVATION_CODE_BOOL: String

Disables dialing "*228" (OTASP provisioning) on CDMA carriers where it is not supported or is potentially harmful by locking the SIM to 3G.

Value: "disable_cdma_activation_code_bool"

KEY_DISABLE_CHARGE_INDICATION_BOOL

Added in API level 30
static val KEY_DISABLE_CHARGE_INDICATION_BOOL: String

The flag to disable the popup dialog which warns the user of data charges.

Value: "disable_charge_indication_bool"

KEY_DISABLE_SUPPLEMENTARY_SERVICES_IN_AIRPLANE_MODE_BOOL

Added in API level 30
static val KEY_DISABLE_SUPPLEMENTARY_SERVICES_IN_AIRPLANE_MODE_BOOL: String

Boolean indicating the Supplementary Services(SS) is disable when airplane mode on in the Call Settings menu. true: SS is disable when airplane mode on. false: SS is enable when airplane mode on. The default value for this key is false

Value: "disable_supplementary_services_in_airplane_mode_bool"

KEY_DISCONNECT_CAUSE_PLAY_BUSYTONE_INT_ARRAY

Added in API level 30
static val KEY_DISCONNECT_CAUSE_PLAY_BUSYTONE_INT_ARRAY: String

DisconnectCause array to play busy tone. Value should be array of android.telephony.DisconnectCause.

Value: "disconnect_cause_play_busytone_int_array"

KEY_DISPLAY_CALL_STRENGTH_INDICATOR_BOOL

Added in API level 31
static val KEY_DISPLAY_CALL_STRENGTH_INDICATOR_BOOL: String

Determine whether or not to display a call strength indicator for this carrier in the System UI. Disabling the indication may be reasonable if the carrier's calling is not integrated into the Android telephony stack (e.g. it is OTT). true: Use telephony APIs to detect the current networking medium of calling and display a UI indication based on the current strength (e.g. signal level) of that medium. false: Do not display the call strength indicator.

Value: "display_call_strength_indicator_bool"

KEY_DISPLAY_HD_AUDIO_PROPERTY_BOOL

Added in API level 27
static val KEY_DISPLAY_HD_AUDIO_PROPERTY_BOOL: String

Determines whether High Definition audio property is displayed in the dialer UI. If false, remove the HD audio property from the connection so that HD audio related UI is not displayed. If true, keep HD audio property as it is configured.

Value: "display_hd_audio_property_bool"

KEY_DROP_VIDEO_CALL_WHEN_ANSWERING_AUDIO_CALL_BOOL

Added in API level 25
static val KEY_DROP_VIDEO_CALL_WHEN_ANSWERING_AUDIO_CALL_BOOL: String

When true, if the user is in an ongoing video call over WIFI and answers an incoming audio call, the video call will be disconnected before the audio call is answered. This is in contrast to the usual expected behavior where a foreground video call would be put into the background and held when an incoming audio call is answered.

Value: "drop_video_call_when_answering_audio_call_bool"

KEY_DTMF_TYPE_ENABLED_BOOL

Added in API level 23
static val KEY_DTMF_TYPE_ENABLED_BOOL: String

Flag indicating if dtmf tone type is enabled

Value: "dtmf_type_enabled_bool"

KEY_DURATION_BLOCKING_DISABLED_AFTER_EMERGENCY_INT

Added in API level 24
static val KEY_DURATION_BLOCKING_DISABLED_AFTER_EMERGENCY_INT: String

The duration in seconds that platform call and message blocking is disabled after the user contacts emergency services. Platform considers values for below cases: 1) 0 <= VALUE <= 604800(one week): the value will be used as the duration directly. 2) VALUE > 604800(one week): will use the default value as duration instead. 3) VALUE < 0: block will be disabled forever until user re-enable block manually, the suggested value to disable forever is -1. See android.provider.BlockedNumberContract#notifyEmergencyContact(Context) See android.provider.BlockedNumberContract#isBlocked(Context, String).

Value: "duration_blocking_disabled_after_emergency_int"

KEY_EDITABLE_ENHANCED_4G_LTE_BOOL

Added in API level 24
static val KEY_EDITABLE_ENHANCED_4G_LTE_BOOL: String

Determine whether user can toggle Enhanced 4G LTE Mode in Settings.

Value: "editable_enhanced_4g_lte_bool"

KEY_EDITABLE_VOICEMAIL_NUMBER_BOOL

Added in API level 26
static val KEY_EDITABLE_VOICEMAIL_NUMBER_BOOL: String

Since the default voicemail number is empty, if a SIM card does not have a voicemail number available the user cannot use voicemail. This flag allows the user to edit the voicemail number in such cases, and is false by default.

Value: "editable_voicemail_number_bool"

KEY_EDITABLE_VOICEMAIL_NUMBER_SETTING_BOOL

Added in API level 28
static val KEY_EDITABLE_VOICEMAIL_NUMBER_SETTING_BOOL: String

Determine whether user can edit voicemail number in Settings.

Value: "editable_voicemail_number_setting_bool"

KEY_EDITABLE_WFC_MODE_BOOL

Added in API level 30
static val KEY_EDITABLE_WFC_MODE_BOOL: String

Determine whether user can switch Wi-Fi preferred or Cellular preferred in calling preference. Some operators support Wi-Fi Calling only, not VoLTE. They don't need "Cellular preferred" option. In this case, set uneditable attribute for preferred preference.

Value: "editable_wfc_mode_bool"

KEY_EDITABLE_WFC_ROAMING_MODE_BOOL

Added in API level 30
static val KEY_EDITABLE_WFC_ROAMING_MODE_BOOL: String

Determine whether user can change Wi-Fi Calling preference in roaming. false - roaming preference cannot be changed by user independently. If KEY_USE_WFC_HOME_NETWORK_MODE_IN_ROAMING_NETWORK_BOOL is false, KEY_CARRIER_DEFAULT_WFC_IMS_ROAMING_MODE_INT is used as the default value. If KEY_USE_WFC_HOME_NETWORK_MODE_IN_ROAMING_NETWORK_BOOL is true, roaming preference is the same as home preference and KEY_CARRIER_DEFAULT_WFC_IMS_MODE_INT is used as the default value. true - roaming preference can be changed by user independently if KEY_USE_WFC_HOME_NETWORK_MODE_IN_ROAMING_NETWORK_BOOL is false. If KEY_USE_WFC_HOME_NETWORK_MODE_IN_ROAMING_NETWORK_BOOL is true, this configuration is ignored and roaming preference cannot be changed.

Value: "editable_wfc_roaming_mode_bool"

KEY_EMERGENCY_NOTIFICATION_DELAY_INT

Added in API level 30
static val KEY_EMERGENCY_NOTIFICATION_DELAY_INT: String

Time delay (in ms) after which we show the notification for emergency calls, while the device is registered over WFC. Default value is -1, which indicates that this notification is not pertinent for a particular carrier. We've added a delay to prevent false positives.

Value: "emergency_notification_delay_int"

KEY_EMERGENCY_NUMBER_PREFIX_STRING_ARRAY

Added in API level 29
static val KEY_EMERGENCY_NUMBER_PREFIX_STRING_ARRAY: String

Indicates zero or more emergency number prefix(es), because some carrier requires if users dial an emergency number address with a specific prefix, the combination of the prefix and the address is also a valid emergency number to dial. For example, an emergency number prefix is 318, and the emergency number is 911. Both 318911 and 911 can be dialed by users for emergency call. An empty array of string indicates that current carrier does not have this requirement.

Value: "emergency_number_prefix_string_array"

KEY_ENABLE_CROSS_SIM_CALLING_ON_OPPORTUNISTIC_DATA_BOOL

Added in API level 33
static val KEY_ENABLE_CROSS_SIM_CALLING_ON_OPPORTUNISTIC_DATA_BOOL: String

Flag specifying whether cross sim calling on opportunistic data is supported for carrier. When false the carrier does not support cross sim calling on opportunistic data. When true the carrier does support cross sim calling on opportunistic data.

Value: "enable_cross_sim_calling_on_opportunistic_data_bool"

KEY_ENABLE_DIALER_KEY_VIBRATION_BOOL

Added in API level 23
static val KEY_ENABLE_DIALER_KEY_VIBRATION_BOOL: String

If true, enable vibration (haptic feedback) for key presses in the EmergencyDialer activity. The pattern is set on a per-platform basis using config_virtualKeyVibePattern. To be consistent with the regular Dialer, this value should agree with the corresponding values from config.xml under apps/Contacts.

Value: "enable_dialer_key_vibration_bool"

KEY_ENHANCED_4G_LTE_ON_BY_DEFAULT_BOOL

Added in API level 29
static val KEY_ENHANCED_4G_LTE_ON_BY_DEFAULT_BOOL: String

Sets the default state for the "Enhanced 4G LTE" or "Advanced Calling" mode toggle set by the user. When this is true, this mode by default is on, otherwise if false, this mode by default is off.

Value: "enhanced_4g_lte_on_by_default_bool"

KEY_ENHANCED_4G_LTE_TITLE_VARIANT_INT

Added in API level 30
static val KEY_ENHANCED_4G_LTE_TITLE_VARIANT_INT: String

The index indicates the carrier specified title string of Enhanced 4G LTE Mode settings. Default value is 0, which indicates the default title string.

Value: "enhanced_4g_lte_title_variant_int"

KEY_ESIM_DOWNLOAD_RETRY_BACKOFF_TIMER_SEC_INT

Added in API level 33
static val KEY_ESIM_DOWNLOAD_RETRY_BACKOFF_TIMER_SEC_INT: String

This timer value is used in the eSIM Exponential Backoff download retry algorithm. Value should be in seconds.

  1. When the first download failure occurs, retry download after BACKOFF_TIMER_VALUE seconds.
  2. If download fails again then, retry after either BACKOFF_TIMER_VALUE, 2xBACKOFF_TIMER_VALUE, or 3xBACKOFF_TIMER_VALUE seconds.
  3. In general after the cth failed attempt, retry after k * BACKOFF_TIMER_VALUE seconds, where k is a random integer between 1 and 2^c − 1. Max c value is KEY_ESIM_MAX_DOWNLOAD_RETRY_ATTEMPTS_INT

Value: "esim_download_retry_backoff_timer_sec_int"

KEY_ESIM_MAX_DOWNLOAD_RETRY_ATTEMPTS_INT

Added in API level 33
static val KEY_ESIM_MAX_DOWNLOAD_RETRY_ATTEMPTS_INT: String

If eSIM profile download fails then, the number of retry attempts by UE will be based on this configuration. If download still fails even after the MAX attempts configured by this item then the retry is postponed until next device bootup.

Value: "esim_max_download_retry_attempts_int"

KEY_FORCE_HOME_NETWORK_BOOL

Added in API level 23
static val KEY_FORCE_HOME_NETWORK_BOOL: String

Override the platform's notion of a network operator being considered non roaming. If true all networks are considered as home network a.k.a. non-roaming. When false, the 2 pairs of CMDA and GSM roaming/non-roaming arrays are consulted.

Value: "force_home_network_bool"

KEY_GSM_DTMF_TONE_DELAY_INT

Added in API level 24
static val KEY_GSM_DTMF_TONE_DELAY_INT: String

Specifies the amount of gap to be added in millis between postdial DTMF tones. When a non-zero value is specified, the UE shall wait for the specified amount of time before it sends out successive DTMF tones on the network.

Value: "gsm_dtmf_tone_delay_int"

KEY_GSM_NONROAMING_NETWORKS_STRING_ARRAY

Added in API level 23
static val KEY_GSM_NONROAMING_NETWORKS_STRING_ARRAY: String

Override the platform's notion of a network operator being considered not roaming. Value is string array of MCCMNCs to be considered not roaming for 3GPP RATs.

Value: "gsm_nonroaming_networks_string_array"

KEY_GSM_ROAMING_NETWORKS_STRING_ARRAY

Added in API level 23
static val KEY_GSM_ROAMING_NETWORKS_STRING_ARRAY: String

Override the platform's notion of a network operator being considered roaming. Value is string array of MCCMNCs to be considered roaming for 3GPP RATs.

Value: "gsm_roaming_networks_string_array"

KEY_HAS_IN_CALL_NOISE_SUPPRESSION_BOOL

Added in API level 23
static val KEY_HAS_IN_CALL_NOISE_SUPPRESSION_BOOL: String

Determines if device implements a noise suppression device for in call audio.

Value: "has_in_call_noise_suppression_bool"

KEY_HIDE_CARRIER_NETWORK_SETTINGS_BOOL

Added in API level 23
static val KEY_HIDE_CARRIER_NETWORK_SETTINGS_BOOL: String

Control whether users can reach the carrier portions of Cellular Network Settings.

Value: "hide_carrier_network_settings_bool"

KEY_HIDE_ENHANCED_4G_LTE_BOOL

Added in API level 26
static val KEY_HIDE_ENHANCED_4G_LTE_BOOL: String

Determines whether the Enhanced 4G LTE toggle will be shown in the settings. When this option is true, the toggle will be hidden regardless of whether the device and carrier supports 4G LTE or not.

Value: "hide_enhanced_4g_lte_bool"

KEY_HIDE_IMS_APN_BOOL

Added in API level 24
static val KEY_HIDE_IMS_APN_BOOL: String

Determine whether IMS apn can be shown.

Value: "hide_ims_apn_bool"

KEY_HIDE_LTE_PLUS_DATA_ICON_BOOL

Added in API level 30
static val KEY_HIDE_LTE_PLUS_DATA_ICON_BOOL: String

Boolean indicating if LTE+ icon should be shown if available.

Value: "hide_lte_plus_data_icon_bool"

KEY_HIDE_PREFERRED_NETWORK_TYPE_BOOL

Added in API level 24
static val KEY_HIDE_PREFERRED_NETWORK_TYPE_BOOL: String

Determine whether preferred network type can be shown.

Value: "hide_preferred_network_type_bool"

KEY_HIDE_PRESET_APN_DETAILS_BOOL

Added in API level 29
static val KEY_HIDE_PRESET_APN_DETAILS_BOOL: String

Flag to hide Preset APN details. If true, user cannot enter ApnEditor view of Preset APN, and cannot view details of the APN. If false, user can enter ApnEditor view of Preset APN. Default value is false.

Value: "hide_preset_apn_details_bool"

KEY_HIDE_SIM_LOCK_SETTINGS_BOOL

Added in API level 23
static val KEY_HIDE_SIM_LOCK_SETTINGS_BOOL: String

Control whether users can reach the SIM lock settings.

Value: "hide_sim_lock_settings_bool"

KEY_HIDE_TTY_HCO_VCO_WITH_RTT_BOOL

Added in API level 31
static val KEY_HIDE_TTY_HCO_VCO_WITH_RTT_BOOL: String

Indicates if the TTY HCO and VCO options should be hidden in the accessibility menu if the device is capable of RTT.

Value: "hide_tty_hco_vco_with_rtt"

KEY_IGNORE_DATA_ENABLED_CHANGED_FOR_VIDEO_CALLS

Added in API level 30
static val KEY_IGNORE_DATA_ENABLED_CHANGED_FOR_VIDEO_CALLS: String

When true, changes to the mobile data enabled switch will not cause the VT registration state to change. That is, turning on or off mobile data will not cause VT to be enabled or disabled. When false, disabling mobile data will cause VT to be de-registered.

Value: "ignore_data_enabled_changed_for_video_calls"

KEY_IGNORE_RTT_MODE_SETTING_BOOL

Added in API level 30
static val KEY_IGNORE_RTT_MODE_SETTING_BOOL: String

When true, the phone will always tell the IMS stack to keep RTT enabled and determine on a per-call basis (based on extras from the dialer app) whether a call should be an RTT call or not. When false, the old behavior is used, where the toggle in accessibility settings is used to set the IMS stack's RTT enabled state.

Value: "ignore_rtt_mode_setting_bool"

KEY_IGNORE_SIM_NETWORK_LOCKED_EVENTS_BOOL

Added in API level 23
static val KEY_IGNORE_SIM_NETWORK_LOCKED_EVENTS_BOOL: String

Flag indicating whether the Phone app should ignore EVENT_SIM_NETWORK_LOCKED events from the Sim. If true, this will prevent the IccNetworkDepersonalizationPanel from being shown, and effectively disable the "Sim network lock" feature.

Value: "ignore_sim_network_locked_events_bool"

KEY_IMS_CONFERENCE_SIZE_LIMIT_INT

Added in API level 26
static val KEY_IMS_CONFERENCE_SIZE_LIMIT_INT: String

Determines the maximum number of participants the carrier supports for a conference call. This number is exclusive of the current device. A conference between 3 devices, for example, would have a size limit of 2 participants. Enforced when KEY_IS_IMS_CONFERENCE_SIZE_ENFORCED_BOOL is true.

Value: "ims_conference_size_limit_int"

KEY_IMS_DTMF_TONE_DELAY_INT

Added in API level 24
static val KEY_IMS_DTMF_TONE_DELAY_INT: String

Specifies the amount of gap to be added in millis between DTMF tones. When a non-zero value is specified, the UE shall wait for the specified amount of time before it sends out successive DTMF tones on the network.

Value: "ims_dtmf_tone_delay_int"

KEY_INCLUDE_LTE_FOR_NR_ADVANCED_THRESHOLD_BANDWIDTH_BOOL

Added in API level 34
static val KEY_INCLUDE_LTE_FOR_NR_ADVANCED_THRESHOLD_BANDWIDTH_BOOL: String

Indicating whether to include LTE cell bandwidths when determining whether the aggregated cell bandwidth meets the required threshold for NR advanced.

Value: "include_lte_for_nr_advanced_threshold_bandwidth_bool"

KEY_IS_IMS_CONFERENCE_SIZE_ENFORCED_BOOL

Added in API level 26
static val KEY_IS_IMS_CONFERENCE_SIZE_ENFORCED_BOOL: String

Determines whether a maximum size limit for IMS conference calls is enforced on the device. When true, IMS conference calls will be limited to at most KEY_IMS_CONFERENCE_SIZE_LIMIT_INT participants. When false, no attempt is made to limit the number of participants in a conference (the carrier will raise an error when an attempt is made to merge too many participants into a conference).

Note: The maximum size of a conference can ONLY be supported where KEY_SUPPORT_IMS_CONFERENCE_EVENT_PACKAGE_BOOL is true since the platform needs conference event package data to accurately know the number of participants in the conference.

Value: "is_ims_conference_size_enforced_bool"

KEY_IS_OPPORTUNISTIC_SUBSCRIPTION_BOOL

Added in API level 33
static val KEY_IS_OPPORTUNISTIC_SUBSCRIPTION_BOOL: String

A boolean property indicating whether this subscription should be managed as an opportunistic subscription. If true, then this subscription will be selected based on available coverage and will not be available for a user in settings menus for selecting macro network providers. If unset, defaults to “false”.

This key will work all the way back to android.os.Build.VERSION_CODES#Q.

Value: "is_opportunistic_subscription_bool"

KEY_LTE_ENABLED_BOOL

Added in API level 30
static val KEY_LTE_ENABLED_BOOL: String

Boolean to decide whether LTE is enabled.

Value: "lte_enabled_bool"

KEY_LTE_RSRQ_THRESHOLDS_INT_ARRAY

Added in API level 30
static val KEY_LTE_RSRQ_THRESHOLDS_INT_ARRAY: String

A list of 4 customized LTE Reference Signal Received Quality (RSRQ) thresholds. Reference: TS 136.133 v12.6.0 section 9.1.7 - RSRQ Measurement Report Mapping. 4 threshold integers must be within the boundaries [-34 dB, 3 dB], and the levels are: "NONE: [-34, threshold1)" "POOR: [threshold1, threshold2)" "MODERATE: [threshold2, threshold3)" "GOOD: [threshold3, threshold4)" "EXCELLENT: [threshold4, 3]" This key is considered invalid if the format is violated. If the key is invalid or not configured, a default value set will apply.

Value: "lte_rsrq_thresholds_int_array"

KEY_LTE_RSSNR_THRESHOLDS_INT_ARRAY

Added in API level 30
static val KEY_LTE_RSSNR_THRESHOLDS_INT_ARRAY: String

A list of 4 customized LTE Reference Signal Signal to Noise Ratio (RSSNR) thresholds. 4 threshold integers must be within the boundaries [-20 dB, 30 dB], and the levels are: "NONE: [-20, threshold1)" "POOR: [threshold1, threshold2)" "MODERATE: [threshold2, threshold3)" "GOOD: [threshold3, threshold4)" "EXCELLENT: [threshold4, 30]" This key is considered invalid if the format is violated. If the key is invalid or not configured, a default value set will apply.

Value: "lte_rssnr_thresholds_int_array"

KEY_MDN_IS_ADDITIONAL_VOICEMAIL_NUMBER_BOOL

Added in API level 26
static val KEY_MDN_IS_ADDITIONAL_VOICEMAIL_NUMBER_BOOL: String

When checking if a given number is the voicemail number, if this flag is true then in addition to comparing the given number to the voicemail number, we also compare it to the mdn. If this flag is false, the given number is only compared to the voicemail number. By default this value is false.

Value: "mdn_is_additional_voicemail_number_bool"

KEY_MMS_ALIAS_ENABLED_BOOL

Added in API level 23
static val KEY_MMS_ALIAS_ENABLED_BOOL: String
Value: "aliasEnabled"

KEY_MMS_ALIAS_MAX_CHARS_INT

Added in API level 23
static val KEY_MMS_ALIAS_MAX_CHARS_INT: String
Value: "aliasMaxChars"

KEY_MMS_ALIAS_MIN_CHARS_INT

Added in API level 23
static val KEY_MMS_ALIAS_MIN_CHARS_INT: String
Value: "aliasMinChars"

KEY_MMS_ALLOW_ATTACH_AUDIO_BOOL

Added in API level 23
static val KEY_MMS_ALLOW_ATTACH_AUDIO_BOOL: String
Value: "allowAttachAudio"

KEY_MMS_APPEND_TRANSACTION_ID_BOOL

Added in API level 23
static val KEY_MMS_APPEND_TRANSACTION_ID_BOOL: String
Value: "enabledTransID"

KEY_MMS_CLOSE_CONNECTION_BOOL

Added in API level 30
static val KEY_MMS_CLOSE_CONNECTION_BOOL: String

If true, add "Connection: close" header to MMS HTTP requests so the connection is immediately closed (disabling keep-alive).

Value: "mmsCloseConnection"

KEY_MMS_EMAIL_GATEWAY_NUMBER_STRING

Added in API level 23
static val KEY_MMS_EMAIL_GATEWAY_NUMBER_STRING: String
Value: "emailGatewayNumber"

KEY_MMS_GROUP_MMS_ENABLED_BOOL

Added in API level 23
static val KEY_MMS_GROUP_MMS_ENABLED_BOOL: String
Value: "enableGroupMms"

KEY_MMS_HTTP_PARAMS_STRING

Added in API level 23
static val KEY_MMS_HTTP_PARAMS_STRING: String
Value: "httpParams"

KEY_MMS_HTTP_SOCKET_TIMEOUT_INT

Added in API level 23
static val KEY_MMS_HTTP_SOCKET_TIMEOUT_INT: String
Value: "httpSocketTimeout"

KEY_MMS_MAX_IMAGE_HEIGHT_INT

Added in API level 23
static val KEY_MMS_MAX_IMAGE_HEIGHT_INT: String
Value: "maxImageHeight"

KEY_MMS_MAX_IMAGE_WIDTH_INT

Added in API level 23
static val KEY_MMS_MAX_IMAGE_WIDTH_INT: String
Value: "maxImageWidth"

KEY_MMS_MAX_MESSAGE_SIZE_INT

Added in API level 23
static val KEY_MMS_MAX_MESSAGE_SIZE_INT: String
Value: "maxMessageSize"

KEY_MMS_MESSAGE_TEXT_MAX_SIZE_INT

Added in API level 23
static val KEY_MMS_MESSAGE_TEXT_MAX_SIZE_INT: String
Value: "maxMessageTextSize"

KEY_MMS_MMS_DELIVERY_REPORT_ENABLED_BOOL

Added in API level 23
static val KEY_MMS_MMS_DELIVERY_REPORT_ENABLED_BOOL: String
Value: "enableMMSDeliveryReports"

KEY_MMS_MMS_ENABLED_BOOL

Added in API level 23
static val KEY_MMS_MMS_ENABLED_BOOL: String
Value: "enabledMMS"

KEY_MMS_MMS_READ_REPORT_ENABLED_BOOL

Added in API level 23
static val KEY_MMS_MMS_READ_REPORT_ENABLED_BOOL: String
Value: "enableMMSReadReports"

KEY_MMS_MULTIPART_SMS_ENABLED_BOOL

Added in API level 23
static val KEY_MMS_MULTIPART_SMS_ENABLED_BOOL: String
Value: "enableMultipartSMS"

KEY_MMS_NAI_SUFFIX_STRING

Added in API level 23
static val KEY_MMS_NAI_SUFFIX_STRING: String
Value: "naiSuffix"

KEY_MMS_NETWORK_RELEASE_TIMEOUT_MILLIS_INT

Added in API level 34
static val KEY_MMS_NETWORK_RELEASE_TIMEOUT_MILLIS_INT: String

Waiting time in milliseconds used before releasing an MMS data call. Not tearing down an MMS data connection immediately helps to reduce the message delivering latency if messaging continues between all parties in the conversation since the same data connection can be reused for further messages. This timer will control how long the data call will be kept alive before being torn down.

Value: "mms_network_release_timeout_millis_int"

KEY_MMS_NOTIFY_WAP_MMSC_ENABLED_BOOL

Added in API level 23
static val KEY_MMS_NOTIFY_WAP_MMSC_ENABLED_BOOL: String
Value: "enabledNotifyWapMMSC"

KEY_MMS_RECIPIENT_LIMIT_INT

Added in API level 23
static val KEY_MMS_RECIPIENT_LIMIT_INT: String
Value: "recipientLimit"

KEY_MMS_SEND_MULTIPART_SMS_AS_SEPARATE_MESSAGES_BOOL

Added in API level 23
static val KEY_MMS_SEND_MULTIPART_SMS_AS_SEPARATE_MESSAGES_BOOL: String
Value: "sendMultipartSmsAsSeparateMessages"
Added in API level 23
static val KEY_MMS_SHOW_CELL_BROADCAST_APP_LINKS_BOOL: String
Value: "config_cellBroadcastAppLinks"

KEY_MMS_SMS_DELIVERY_REPORT_ENABLED_BOOL

Added in API level 23
static val KEY_MMS_SMS_DELIVERY_REPORT_ENABLED_BOOL: String
Value: "enableSMSDeliveryReports"

KEY_MMS_SMS_TO_MMS_TEXT_LENGTH_THRESHOLD_INT

Added in API level 23
static val KEY_MMS_SMS_TO_MMS_TEXT_LENGTH_THRESHOLD_INT: String
Value: "smsToMmsTextLengthThreshold"

KEY_MMS_SMS_TO_MMS_TEXT_THRESHOLD_INT

Added in API level 23
static val KEY_MMS_SMS_TO_MMS_TEXT_THRESHOLD_INT: String
Value: "smsToMmsTextThreshold"

KEY_MMS_SUBJECT_MAX_LENGTH_INT

Added in API level 23
static val KEY_MMS_SUBJECT_MAX_LENGTH_INT: String
Value: "maxSubjectLength"

KEY_MMS_SUPPORT_HTTP_CHARSET_HEADER_BOOL

Added in API level 23
static val KEY_MMS_SUPPORT_HTTP_CHARSET_HEADER_BOOL: String
Value: "supportHttpCharsetHeader"

KEY_MMS_SUPPORT_MMS_CONTENT_DISPOSITION_BOOL

Added in API level 23
static val KEY_MMS_SUPPORT_MMS_CONTENT_DISPOSITION_BOOL: String
Value: "supportMmsContentDisposition"

KEY_MMS_UA_PROF_TAG_NAME_STRING

Added in API level 23
static val KEY_MMS_UA_PROF_TAG_NAME_STRING: String
Value: "uaProfTagName"

KEY_MMS_UA_PROF_URL_STRING

Added in API level 23
static val KEY_MMS_UA_PROF_URL_STRING: String
Value: "uaProfUrl"

KEY_MMS_USER_AGENT_STRING

Added in API level 23
static val KEY_MMS_USER_AGENT_STRING: String
Value: "userAgent"

KEY_MONTHLY_DATA_CYCLE_DAY_INT

Added in API level 26
static val KEY_MONTHLY_DATA_CYCLE_DAY_INT: String

The day of the month (1-31) on which the data cycle rolls over.

If the current month does not have this day, the cycle will roll over at the start of the next month.

This setting may be still overridden by explicit user choice. By default, DATA_CYCLE_USE_PLATFORM_DEFAULT will be used.

Value: "monthly_data_cycle_day_int"

KEY_ONLY_AUTO_SELECT_IN_HOME_NETWORK_BOOL

Added in API level 30
static val KEY_ONLY_AUTO_SELECT_IN_HOME_NETWORK_BOOL: String

Only allow auto selection in Advanced Network Settings when in home network. Manual selection is allowed when in roaming network.

Value: "only_auto_select_in_home_network"

KEY_ONLY_SINGLE_DC_ALLOWED_INT_ARRAY

Added in API level 26
static val KEY_ONLY_SINGLE_DC_ALLOWED_INT_ARRAY: String

List of network type constants which support only a single data connection at a time. Some carriers do not support multiple PDP on UMTS.

Value: "only_single_dc_allowed_int_array"

KEY_OPERATOR_SELECTION_EXPAND_BOOL

Added in API level 23
static val KEY_OPERATOR_SELECTION_EXPAND_BOOL: String

Control whether users can choose a network operator.

Value: "operator_selection_expand_bool"

KEY_OPPORTUNISTIC_NETWORK_BACKOFF_TIME_LONG

Added in API level 30
static val KEY_OPPORTUNISTIC_NETWORK_BACKOFF_TIME_LONG: String

Controls back off time in milli seconds for switching back to opportunistic subscription. This time will be added to CarrierConfigManager#KEY_OPPORTUNISTIC_NETWORK_DATA_SWITCH_HYSTERESIS_TIME_LONG to determine hysteresis time if there is ping pong situation (determined by system app or 1st party app) between primary and opportunistic subscription. Ping ping situation is defined in #KEY_OPPORTUNISTIC_NETWORK_PING_PONG_TIME_LONG. If ping pong situation continuous #KEY_OPPORTUNISTIC_NETWORK_BACKOFF_TIME_LONG will be added to previously determined hysteresis time.

Value: "opportunistic_network_backoff_time_long"

KEY_OPPORTUNISTIC_NETWORK_DATA_SWITCH_EXIT_HYSTERESIS_TIME_LONG

Added in API level 30
static val KEY_OPPORTUNISTIC_NETWORK_DATA_SWITCH_EXIT_HYSTERESIS_TIME_LONG: String

Controls hysteresis time in milli seconds for which OpportunisticNetworkService will wait before switching data from opportunistic network to primary network.

Value: "opportunistic_network_data_switch_exit_hysteresis_time_long"

KEY_OPPORTUNISTIC_NETWORK_DATA_SWITCH_HYSTERESIS_TIME_LONG

Added in API level 29
static val KEY_OPPORTUNISTIC_NETWORK_DATA_SWITCH_HYSTERESIS_TIME_LONG: String

Controls hysteresis time in milli seconds for which OpportunisticNetworkService will wait before switching data to an opportunistic network.

Value: "opportunistic_network_data_switch_hysteresis_time_long"

KEY_OPPORTUNISTIC_NETWORK_ENTRY_OR_EXIT_HYSTERESIS_TIME_LONG

Added in API level 29
static val KEY_OPPORTUNISTIC_NETWORK_ENTRY_OR_EXIT_HYSTERESIS_TIME_LONG: String

Controls hysteresis time in milli seconds for which OpportunisticNetworkService will wait before attaching to a network.

Value: "opportunistic_network_entry_or_exit_hysteresis_time_long"

KEY_OPPORTUNISTIC_NETWORK_ENTRY_THRESHOLD_BANDWIDTH_INT

Added in API level 29
static val KEY_OPPORTUNISTIC_NETWORK_ENTRY_THRESHOLD_BANDWIDTH_INT: String

Controls bandwidth threshold in Kbps at which OpportunisticNetworkService will decide whether the opportunistic network is good enough for internet data.

Value: "opportunistic_network_entry_threshold_bandwidth_int"

KEY_OPPORTUNISTIC_NETWORK_ENTRY_THRESHOLD_RSRP_INT

Added in API level 29
static val KEY_OPPORTUNISTIC_NETWORK_ENTRY_THRESHOLD_RSRP_INT: String

Controls RSRP threshold, in dBm, at which OpportunisticNetworkService will decide whether the opportunistic network is good enough for internet data.

The value of CellSignalStrengthLte#getRsrp() will be compared with this threshold.

Value: "opportunistic_network_entry_threshold_rsrp_int"

KEY_OPPORTUNISTIC_NETWORK_ENTRY_THRESHOLD_RSSNR_INT

Added in API level 29
static val KEY_OPPORTUNISTIC_NETWORK_ENTRY_THRESHOLD_RSSNR_INT: String

Controls RSSNR threshold, in dB, at which OpportunisticNetworkService will decide whether the opportunistic network is good enough for internet data.

The value of CellSignalStrengthLte#getRssnr() will be compared with this threshold.

Value: "opportunistic_network_entry_threshold_rssnr_int"

KEY_OPPORTUNISTIC_NETWORK_EXIT_THRESHOLD_RSRP_INT

Added in API level 29
static val KEY_OPPORTUNISTIC_NETWORK_EXIT_THRESHOLD_RSRP_INT: String

Controls RSRP threshold, in dBm, below which OpportunisticNetworkService will decide whether the opportunistic network available is not good enough for internet data.

The value of CellSignalStrengthLte#getRsrp() will be compared with this threshold.

Value: "opportunistic_network_exit_threshold_rsrp_int"

KEY_OPPORTUNISTIC_NETWORK_EXIT_THRESHOLD_RSSNR_INT

Added in API level 29
static val KEY_OPPORTUNISTIC_NETWORK_EXIT_THRESHOLD_RSSNR_INT: String

Controls RSSNR threshold, in dB, below which OpportunisticNetworkService will decide whether the opportunistic network available is not good enough for internet data.

The value of CellSignalStrengthLte#getRssnr() will be compared with this threshold.

Value: "opportunistic_network_exit_threshold_rssnr_int"

KEY_OPPORTUNISTIC_NETWORK_MAX_BACKOFF_TIME_LONG

Added in API level 30
static val KEY_OPPORTUNISTIC_NETWORK_MAX_BACKOFF_TIME_LONG: String

Controls the max back off time in milli seconds for switching back to opportunistic subscription. This time will be the max hysteresis that can be determined irrespective of there is continuous ping pong situation or not as described in #KEY_OPPORTUNISTIC_NETWORK_PING_PONG_TIME_LONG and #KEY_OPPORTUNISTIC_NETWORK_BACKOFF_TIME_LONG.

Value: "opportunistic_network_max_backoff_time_long"

KEY_OPPORTUNISTIC_NETWORK_PING_PONG_TIME_LONG

Added in API level 30
static val KEY_OPPORTUNISTIC_NETWORK_PING_PONG_TIME_LONG: String

Controls the ping pong determination of opportunistic network. If opportunistic network is determined as out of service or below #KEY_OPPORTUNISTIC_NETWORK_EXIT_THRESHOLD_RSRP_INT or #KEY_OPPORTUNISTIC_NETWORK_EXIT_THRESHOLD_RSSNR_INT within #KEY_OPPORTUNISTIC_NETWORK_PING_PONG_TIME_LONG of switching to opportunistic network, it will be determined as ping pong situation by system app or 1st party app.

Value: "opportunistic_network_ping_pong_time_long"

KEY_PING_TEST_BEFORE_DATA_SWITCH_BOOL

Added in API level 30
static val KEY_PING_TEST_BEFORE_DATA_SWITCH_BOOL: String

Controls whether to do ping test before switching data to opportunistic network. This carrier config is used to disable this feature.

Value: "ping_test_before_data_switch_bool"

KEY_PREFER_2G_BOOL

Added in API level 23
static val KEY_PREFER_2G_BOOL: String

Used in the Preferred Network Types menu to determine if the 2G option is displayed. Value defaults to false as of Android T to discourage the use of insecure 2G protocols.

Value: "prefer_2g_bool"

KEY_PREMIUM_CAPABILITY_MAXIMUM_DAILY_NOTIFICATION_COUNT_INT

Added in API level 34
static val KEY_PREMIUM_CAPABILITY_MAXIMUM_DAILY_NOTIFICATION_COUNT_INT: String

The maximum number of times in a day that we display the notification for a performance boost via premium capabilities when TelephonyManager#purchasePremiumCapability(int, Executor, Consumer) returns a failure due to user action or timeout. The default value is 2 times.

Value: "premium_capability_maximum_daily_notification_count_int"

KEY_PREMIUM_CAPABILITY_MAXIMUM_MONTHLY_NOTIFICATION_COUNT_INT

Added in API level 34
static val KEY_PREMIUM_CAPABILITY_MAXIMUM_MONTHLY_NOTIFICATION_COUNT_INT: String

The maximum number of times in a month that we display the notification for a performance boost via premium capabilities when TelephonyManager#purchasePremiumCapability(int, Executor, Consumer) returns a failure due to user action or timeout. The default value is 10 times.

Value: "premium_capability_maximum_monthly_notification_count_int"

KEY_PREMIUM_CAPABILITY_NETWORK_SETUP_TIME_MILLIS_LONG

Added in API level 34
static val KEY_PREMIUM_CAPABILITY_NETWORK_SETUP_TIME_MILLIS_LONG: String

The amount of time in milliseconds within which the network must set up a slicing configuration for the premium capability after TelephonyManager#purchasePremiumCapability(int, Executor, Consumer) returns TelephonyManager#PURCHASE_PREMIUM_CAPABILITY_RESULT_SUCCESS. During the setup time, calls to TelephonyManager#purchasePremiumCapability(int, Executor, Consumer) will return TelephonyManager#PURCHASE_PREMIUM_CAPABILITY_RESULT_PENDING_NETWORK_SETUP. If the network fails to set up a slicing configuration for the premium capability within the setup time, subsequent purchase requests will be allowed to go through again. The default value is 5 minutes.

Value: "premium_capability_network_setup_time_millis_long"

KEY_PREMIUM_CAPABILITY_NOTIFICATION_BACKOFF_HYSTERESIS_TIME_MILLIS_LONG

Added in API level 34
static val KEY_PREMIUM_CAPABILITY_NOTIFICATION_BACKOFF_HYSTERESIS_TIME_MILLIS_LONG: String

The amount of time in milliseconds that the notification for a performance boost via premium capabilities should be blocked when TelephonyManager#purchasePremiumCapability(int, Executor, Consumer) returns a failure due to user action or timeout. The maximum number of performance boost notifications to show the user are defined in KEY_PREMIUM_CAPABILITY_MAXIMUM_DAILY_NOTIFICATION_COUNT_INT and KEY_PREMIUM_CAPABILITY_MAXIMUM_MONTHLY_NOTIFICATION_COUNT_INT. The default value is 30 minutes.

Value: "premium_capability_notification_backoff_hysteresis_time_millis_long"

KEY_PREMIUM_CAPABILITY_NOTIFICATION_DISPLAY_TIMEOUT_MILLIS_LONG

Added in API level 34
static val KEY_PREMIUM_CAPABILITY_NOTIFICATION_DISPLAY_TIMEOUT_MILLIS_LONG: String

The amount of time in milliseconds the notification for a performance boost via premium capabilities will be visible to the user after TelephonyManager#purchasePremiumCapability(int, Executor, Consumer) requests user action to purchase the boost from the carrier. Once the timeout expires, the performance boost notification will be automatically dismissed and the request will fail with TelephonyManager#PURCHASE_PREMIUM_CAPABILITY_RESULT_TIMEOUT. The default value is 30 minutes.

Value: "premium_capability_notification_display_timeout_millis_long"

KEY_PREMIUM_CAPABILITY_PURCHASE_CONDITION_BACKOFF_HYSTERESIS_TIME_MILLIS_LONG

Added in API level 34
static val KEY_PREMIUM_CAPABILITY_PURCHASE_CONDITION_BACKOFF_HYSTERESIS_TIME_MILLIS_LONG: String

The amount of time in milliseconds that the purchase request should be throttled when TelephonyManager#purchasePremiumCapability(int, Executor, Consumer) returns a failure due to the carrier. The default value is 30 minutes.

Value: "premium_capability_purchase_condition_backoff_hysteresis_time_millis_long"

KEY_PREMIUM_CAPABILITY_PURCHASE_URL_STRING

Added in API level 34
static val KEY_PREMIUM_CAPABILITY_PURCHASE_URL_STRING: String

The URL to redirect to when the user clicks on the notification for a performance boost via premium capabilities after applications call TelephonyManager#purchasePremiumCapability(int, Executor, Consumer). If the URL is empty or invalid, the purchase request will return TelephonyManager#PURCHASE_PREMIUM_CAPABILITY_RESULT_FEATURE_NOT_SUPPORTED. This is empty by default.

Value: "premium_capability_purchase_url_string"

KEY_PREMIUM_CAPABILITY_SUPPORTED_ON_LTE_BOOL

Added in API level 34
static val KEY_PREMIUM_CAPABILITY_SUPPORTED_ON_LTE_BOOL: String

Whether to allow premium capabilities to be purchased when the device is connected to LTE. If this is true, applications can call TelephonyManager#purchasePremiumCapability(int, Executor, Consumer) when connected to TelephonyManager#NETWORK_TYPE_LTE to purchase and use premium capabilities. If this is false, applications can only purchase and use premium capabilities when connected to TelephonyManager#NETWORK_TYPE_NR. This is false by default.

Value: "premium_capability_supported_on_lte_bool"

KEY_PREVENT_CLIR_ACTIVATION_AND_DEACTIVATION_CODE_BOOL

Added in API level 30
static val KEY_PREVENT_CLIR_ACTIVATION_AND_DEACTIVATION_CODE_BOOL: String

Flag specifying whether to prevent sending CLIR activation("*31#") and deactivation("#31#") code only without dialing number. When true, these are prevented, false otherwise.

Value: "prevent_clir_activation_and_deactivation_code_bool"

KEY_RADIO_RESTART_FAILURE_CAUSES_INT_ARRAY

Added in API level 29
static val KEY_RADIO_RESTART_FAILURE_CAUSES_INT_ARRAY: String

A list of failure cause codes that will trigger a modem restart when telephony receiving one of those during data setup. The cause codes are defined in 3GPP TS 24.008 Annex I and TS 24.301 Annex B.

Value: "radio_restart_failure_causes_int_array"

KEY_RATCHET_NR_ADVANCED_BANDWIDTH_IF_RRC_IDLE_BOOL

Added in API level 34
static val KEY_RATCHET_NR_ADVANCED_BANDWIDTH_IF_RRC_IDLE_BOOL: String

Indicating whether to ratchet the aggregated cell bandwidths on receiving new values when the device is in RRC IDLE mode. The aggregated cell bandwidths are used for determining NR advanced state. If this is true, we will only update the aggregate cell bandwidths if the new aggregate is higher than the current aggregate and the anchor NR cell is the same. If this is false, we will always update the aggregate cell bandwidths when receiving new values.

Value: "ratchet_nr_advanced_bandwidth_if_rrc_idle_bool"

KEY_RCS_CONFIG_SERVER_URL_STRING

Added in API level 26
static val KEY_RCS_CONFIG_SERVER_URL_STRING: String

The RCS configuration server URL. This URL is used to initiate RCS provisioning.

Value: "rcs_config_server_url_string"

KEY_READ_ONLY_APN_FIELDS_STRING_ARRAY

Added in API level 30
static val KEY_READ_ONLY_APN_FIELDS_STRING_ARRAY: String

APN fields that user is not allowed to modify.

Value: "read_only_apn_fields_string_array"

KEY_READ_ONLY_APN_TYPES_STRING_ARRAY

Added in API level 30
static val KEY_READ_ONLY_APN_TYPES_STRING_ARRAY: String

APN types that user is not allowed to modify.

Value: "read_only_apn_types_string_array"

KEY_REQUIRE_ENTITLEMENT_CHECKS_BOOL

Added in API level 24
static val KEY_REQUIRE_ENTITLEMENT_CHECKS_BOOL: String

Flag to require or skip entitlement checks. If true, entitlement checks will be executed if device has been configured for it, If false, entitlement checks will be skipped.

Value: "require_entitlement_checks_bool"

KEY_RESTART_RADIO_ON_PDP_FAIL_REGULAR_DEACTIVATION_BOOL

Added in API level 26
Deprecated in API level 29
static val KEY_RESTART_RADIO_ON_PDP_FAIL_REGULAR_DEACTIVATION_BOOL: String

Deprecated: Use KEY_RADIO_RESTART_FAILURE_CAUSES_INT_ARRAY instead

Flag indicating whether radio is to be restarted on error PDP_FAIL_REGULAR_DEACTIVATION This is false by default.

Value: "restart_radio_on_pdp_fail_regular_deactivation_bool"

KEY_RTT_AUTO_UPGRADE_BOOL

Added in API level 31
static val KEY_RTT_AUTO_UPGRADE_BOOL: String

Indicates if the carrier supports auto-upgrading a call to RTT when receiving a call from a RTT-supported device.

Value: "rtt_auto_upgrade_bool"

KEY_RTT_DOWNGRADE_SUPPORTED_BOOL

Added in API level 31
static val KEY_RTT_DOWNGRADE_SUPPORTED_BOOL: String

Indicates if the carrier supports downgrading a RTT call to a voice call during the call.

Value: "rtt_downgrade_supported_bool"

KEY_RTT_SUPPORTED_BOOL

Added in API level 28
static val KEY_RTT_SUPPORTED_BOOL: String

Flag indicating whether the carrier supports RTT over IMS.

Value: "rtt_supported_bool"

KEY_RTT_SUPPORTED_FOR_VT_BOOL

Added in API level 31
static val KEY_RTT_SUPPORTED_FOR_VT_BOOL: String

Indicates if the carrier supports RTT during a video call.

Value: "rtt_supported_for_vt_bool"

KEY_RTT_SUPPORTED_WHILE_ROAMING_BOOL

Added in API level 31
static val KEY_RTT_SUPPORTED_WHILE_ROAMING_BOOL: String

Indicates whether RTT is supported while roaming.

Value: "rtt_supported_while_roaming_bool"

KEY_RTT_UPGRADE_SUPPORTED_BOOL

Added in API level 31
static val KEY_RTT_UPGRADE_SUPPORTED_BOOL: String

Indicates if the carrier supports upgrading a voice call to an RTT call during the call.

Value: "rtt_upgrade_supported_bool"

KEY_RTT_UPGRADE_SUPPORTED_FOR_DOWNGRADED_VT_CALL_BOOL

Added in API level 31
static val KEY_RTT_UPGRADE_SUPPORTED_FOR_DOWNGRADED_VT_CALL_BOOL: String

Indicates if the carrier supports upgrading a call that was previously a VT call to RTT.

Value: "rtt_upgrade_supported_for_downgraded_vt_call"

KEY_SHOW_4G_FOR_3G_DATA_ICON_BOOL

Added in API level 30
static val KEY_SHOW_4G_FOR_3G_DATA_ICON_BOOL: String

Boolean indicating if default data account should show 4G icon when in 3G.

Value: "show_4g_for_3g_data_icon_bool"

KEY_SHOW_4G_FOR_LTE_DATA_ICON_BOOL

Added in API level 30
static val KEY_SHOW_4G_FOR_LTE_DATA_ICON_BOOL: String

Boolean indicating if default data account should show LTE or 4G icon.

Value: "show_4g_for_lte_data_icon_bool"

KEY_SHOW_APN_SETTING_CDMA_BOOL

Added in API level 23
static val KEY_SHOW_APN_SETTING_CDMA_BOOL: String

Show APN Settings for some CDMA carriers

Value: "show_apn_setting_cdma_bool"

KEY_SHOW_BLOCKING_PAY_PHONE_OPTION_BOOL

Added in API level 30
static val KEY_SHOW_BLOCKING_PAY_PHONE_OPTION_BOOL: String

Flag specifying whether to show blocking pay phone option in blocked numbers screen. Only show the option if payphone call presentation is present in the carrier's region.

Value: "show_blocking_pay_phone_option_bool"

KEY_SHOW_CALL_BLOCKING_DISABLED_NOTIFICATION_ALWAYS_BOOL

Added in API level 29
static val KEY_SHOW_CALL_BLOCKING_DISABLED_NOTIFICATION_ALWAYS_BOOL: String

Flag specifying whether to show notification(call blocking disabled) when Enhanced Call Blocking(KEY_SUPPORT_ENHANCED_CALL_BLOCKING_BOOL) is enabled and making emergency call. When true, notification is shown always. When false, notification is shown only when any setting of "Enhanced Blocked number" is enabled.

Value: "show_call_blocking_disabled_notification_always_bool"

KEY_SHOW_CDMA_CHOICES_BOOL

Added in API level 23
static val KEY_SHOW_CDMA_CHOICES_BOOL: String

Show cdma network mode choices 1x, 3G, global etc.

Value: "show_cdma_choices_bool"

KEY_SHOW_FORWARDED_NUMBER_BOOL

Added in API level 30
static val KEY_SHOW_FORWARDED_NUMBER_BOOL: String

Flag specifying whether to show forwarded number on call-in-progress screen. When true, forwarded number is shown. When false, forwarded number is not shown.

Value: "show_forwarded_number_bool"

KEY_SHOW_ICCID_IN_SIM_STATUS_BOOL

Added in API level 24
static val KEY_SHOW_ICCID_IN_SIM_STATUS_BOOL: String

Flag specifying whether ICCID is showed in SIM Status screen, default to false.

Value: "show_iccid_in_sim_status_bool"

KEY_SHOW_IMS_REGISTRATION_STATUS_BOOL

Added in API level 30
static val KEY_SHOW_IMS_REGISTRATION_STATUS_BOOL: String

Flag specifying whether IMS registration state menu is shown in Status Info setting, default to false.

Value: "show_ims_registration_status_bool"

KEY_SHOW_ONSCREEN_DIAL_BUTTON_BOOL

Added in API level 23
static val KEY_SHOW_ONSCREEN_DIAL_BUTTON_BOOL: String

If true, show an onscreen "Dial" button in the dialer. In practice this is used on all platforms, even the ones with hard SEND/END keys, but for maximum flexibility it's controlled by a flag here (which can be overridden on a per-product basis.)

Value: "show_onscreen_dial_button_bool"

KEY_SHOW_ROAMING_INDICATOR_BOOL

static val KEY_SHOW_ROAMING_INDICATOR_BOOL: String

Config to show the roaming indicator (i.e. the "R" icon) from the status bar when roaming. The roaming indicator will be shown if this is true and will not be shown if this is false.

Value: "show_roaming_indicator_bool"

KEY_SHOW_SIGNAL_STRENGTH_IN_SIM_STATUS_BOOL

Added in API level 28
static val KEY_SHOW_SIGNAL_STRENGTH_IN_SIM_STATUS_BOOL: String

Flag specifying whether the android.telephony.SignalStrength is shown in the SIM Status screen. The default value is true.

Value: "show_signal_strength_in_sim_status_bool"

KEY_SHOW_VIDEO_CALL_CHARGES_ALERT_DIALOG_BOOL

Added in API level 30
static val KEY_SHOW_VIDEO_CALL_CHARGES_ALERT_DIALOG_BOOL: String

Flag specifying whether to show an alert dialog for video call charges. By default this value is false.

Value: "show_video_call_charges_alert_dialog_bool"

KEY_SHOW_WFC_LOCATION_PRIVACY_POLICY_BOOL

Added in API level 30
static val KEY_SHOW_WFC_LOCATION_PRIVACY_POLICY_BOOL: String

Determines whether wifi calling location privacy policy is shown.

Value: "show_wfc_location_privacy_policy_bool"

KEY_SIMPLIFIED_NETWORK_SETTINGS_BOOL

Added in API level 26
Deprecated in API level 34
static val KEY_SIMPLIFIED_NETWORK_SETTINGS_BOOL: String

Deprecated: Never implemented. Has no behavior impact when override. DO NOT USE.

Control whether users receive a simplified network settings UI and improved network selection.

Value: "simplified_network_settings_bool"

KEY_SIM_COUNTRY_ISO_OVERRIDE_STRING

Added in API level 34
static val KEY_SIM_COUNTRY_ISO_OVERRIDE_STRING: String

String to override sim country iso. Sim country iso is based on sim MCC which is coarse and doesn't work with dual IMSI SIM where a SIM can have multiple MCC from different countries. Instead, each sim carrier should have a single country code, apply per carrier based iso code as an override. The overridden value can be read from TelephonyManager#getSimCountryIso() and SubscriptionInfo#getCountryIso()

Value: "sim_country_iso_override_string"

KEY_SIM_NETWORK_UNLOCK_ALLOW_DISMISS_BOOL

Added in API level 23
static val KEY_SIM_NETWORK_UNLOCK_ALLOW_DISMISS_BOOL: String

Flag indicating whether the Phone app should provide a "Dismiss" button on the SIM network unlock screen. The default value is true. If set to false, there will be *no way* to dismiss the SIM network unlock screen if you don't enter the correct unlock code. (One important consequence: there will be no way to make an Emergency Call if your SIM is network-locked and you don't know the PIN.)

Value: "sim_network_unlock_allow_dismiss_bool"

KEY_SMDP_SERVER_ADDRESS_STRING

Added in API level 33
static val KEY_SMDP_SERVER_ADDRESS_STRING: String

SMDP+ server address for downloading opportunistic eSIM profile. FQDN (Fully Qualified Domain Name) of the SM-DP+ (e.g., smdp.gsma.com) restricted to the Alphanumeric mode character set defined in table 5 of ISO/IEC 18004 excluding '$'.

Value: "smdp_server_address_string"

KEY_SMS_REQUIRES_DESTINATION_NUMBER_CONVERSION_BOOL

Added in API level 26
static val KEY_SMS_REQUIRES_DESTINATION_NUMBER_CONVERSION_BOOL: String

Determines if the carrier requires converting the destination number before sending out an SMS. Certain networks and numbering plans require different formats.

Value: "sms_requires_destination_number_conversion_bool"

KEY_SUBSCRIPTION_GROUP_UUID_STRING

Added in API level 33
static val KEY_SUBSCRIPTION_GROUP_UUID_STRING: String

The UUID of a Group of related subscriptions in which to place the current subscription. A grouped subscription will behave for billing purposes and other UI purposes as though it is a transparent extension of other subscriptions in the group.

If set to REMOVE_GROUP_UUID_STRING, then the subscription will be removed from its current group.

This key will work all the way back to android.os.Build.VERSION_CODES#Q.

Value: "subscription_group_uuid_string"

KEY_SUPPORTED_PREMIUM_CAPABILITIES_INT_ARRAY

Added in API level 34
static val KEY_SUPPORTED_PREMIUM_CAPABILITIES_INT_ARRAY: String

A list of premium capabilities the carrier supports. Applications can prompt users to purchase these premium capabilities from their carrier for a performance boost. Valid values are any of TelephonyManager's PREMIUM_CAPABILITY_* constants. This is empty by default, indicating that no premium capabilities are supported.

Value: "supported_premium_capabilities_int_array"

KEY_SUPPORTS_CALL_COMPOSER_BOOL

Added in API level 31
static val KEY_SUPPORTS_CALL_COMPOSER_BOOL: String

Indicates if the carrier supports call composer.

Value: "supports_call_composer_bool"

KEY_SUPPORTS_DEVICE_TO_DEVICE_COMMUNICATION_USING_DTMF_BOOL

Added in API level 31
static val KEY_SUPPORTS_DEVICE_TO_DEVICE_COMMUNICATION_USING_DTMF_BOOL: String

Indicates whether the carrier supports the use of DTMF digits A-D for the purpose of device to device communication while in a call.

Value: "supports_device_to_device_communication_using_dtmf_bool"

KEY_SUPPORTS_DEVICE_TO_DEVICE_COMMUNICATION_USING_RTP_BOOL

Added in API level 31
static val KEY_SUPPORTS_DEVICE_TO_DEVICE_COMMUNICATION_USING_RTP_BOOL: String

Indicates whether the carrier supports the use of RFC8285 compliant RTP header extensions for the purpose of device to device communication while in a call.

See also KEY_SUPPORTS_SDP_NEGOTIATION_OF_D2D_RTP_HEADER_EXTENSIONS_BOOL.

Value: "supports_device_to_device_communication_using_rtp_bool"

KEY_SUPPORTS_SDP_NEGOTIATION_OF_D2D_RTP_HEADER_EXTENSIONS_BOOL

Added in API level 31
static val KEY_SUPPORTS_SDP_NEGOTIATION_OF_D2D_RTP_HEADER_EXTENSIONS_BOOL: String

Indicates whether the carrier supports the negotiations of RFC8285 compliant RTP header extensions supported on a call during the Session Description Protocol (SDP). This option is only used when KEY_SUPPORTS_DEVICE_TO_DEVICE_COMMUNICATION_USING_RTP_BOOL is true.

When true, the RTP header extensions the platform uses for device to device communication will be offered to the remote end during the SDP negotiation process. When false, the RTP header extensions will not be negotiated during the SDP negotiation process and the platform will send RTP header extensions without prior negotiation if KEY_SUPPORTS_DEVICE_TO_DEVICE_COMMUNICATION_USING_RTP_BOOL is true.

Value: "supports_sdp_negotiation_of_d2d_rtp_header_extensions_bool"

KEY_SUPPORT_3GPP_CALL_FORWARDING_WHILE_ROAMING_BOOL

Added in API level 26
static val KEY_SUPPORT_3GPP_CALL_FORWARDING_WHILE_ROAMING_BOOL: String

Indicates whether the carrier supports 3gpp call forwarding MMI codes while roaming. If false, the user will be notified that call forwarding is not available when the MMI code fails.

Value: "support_3gpp_call_forwarding_while_roaming_bool"

KEY_SUPPORT_ADD_CONFERENCE_PARTICIPANTS_BOOL

Added in API level 31
static val KEY_SUPPORT_ADD_CONFERENCE_PARTICIPANTS_BOOL: String

Determines whether conference participants can be added to existing call to form an adhoc conference call (in contrast to merging calls to form a conference). When true, adding conference participants to existing call is supported, false otherwise.

Value: "support_add_conference_participants_bool"

KEY_SUPPORT_ADHOC_CONFERENCE_CALLS_BOOL

Added in API level 31
static val KEY_SUPPORT_ADHOC_CONFERENCE_CALLS_BOOL: String

Determines whether adhoc conference calls are supported by a carrier. When true, adhoc conference calling is supported, false otherwise.

Value: "support_adhoc_conference_calls_bool"

KEY_SUPPORT_CLIR_NETWORK_DEFAULT_BOOL

Added in API level 29
static val KEY_SUPPORT_CLIR_NETWORK_DEFAULT_BOOL: String

Flag indicating whether to support "Network default" option in Caller ID settings for Calling Line Identification Restriction (CLIR).

Value: "support_clir_network_default_bool"

KEY_SUPPORT_CONFERENCE_CALL_BOOL

Added in API level 24
static val KEY_SUPPORT_CONFERENCE_CALL_BOOL: String

Determines whether conference calls are supported by a carrier. When true, conference calling is supported, false otherwise.

Value: "support_conference_call_bool"

KEY_SUPPORT_EMERGENCY_SMS_OVER_IMS_BOOL

Added in API level 29
static val KEY_SUPPORT_EMERGENCY_SMS_OVER_IMS_BOOL: String

Flag indicating whether or not sending emergency SMS messages over IMS is supported when in LTE/limited LTE (Emergency only) service mode..

Value: "support_emergency_sms_over_ims_bool"

KEY_SUPPORT_ENHANCED_CALL_BLOCKING_BOOL

Added in API level 30
static val KEY_SUPPORT_ENHANCED_CALL_BLOCKING_BOOL: String

Determines whether to enable enhanced call blocking feature on the device. android.provider.BlockedNumberContract.SystemContract#ENHANCED_SETTING_KEY_BLOCK_UNREGISTERED android.provider.BlockedNumberContract.SystemContract#ENHANCED_SETTING_KEY_BLOCK_PRIVATE android.provider.BlockedNumberContract.SystemContract#ENHANCED_SETTING_KEY_BLOCK_PAYPHONE android.provider.BlockedNumberContract.SystemContract#ENHANCED_SETTING_KEY_BLOCK_UNKNOWN android.provider.BlockedNumberContract.SystemContract#ENHANCED_SETTING_KEY_BLOCK_UNAVAILABLE

1. For Single SIM(SS) device, it can be customized in both carrier_config_mccmnc.xml and vendor.xml.

2. For Dual SIM(DS) device, it should be customized in vendor.xml, since call blocking function is used regardless of SIM.

If true enable enhanced call blocking feature on the device, false otherwise.

Value: "support_enhanced_call_blocking_bool"

KEY_SUPPORT_IMS_CONFERENCE_EVENT_PACKAGE_BOOL

Added in API level 30
static val KEY_SUPPORT_IMS_CONFERENCE_EVENT_PACKAGE_BOOL: String

Determines whether the IMS conference merge process supports and returns its participants data. When true, on merge complete, conference call would have a list of its participants returned in XML format, false otherwise.

Value: "support_ims_conference_event_package_bool"

KEY_SUPPORT_PAUSE_IMS_VIDEO_CALLS_BOOL

Added in API level 23
static val KEY_SUPPORT_PAUSE_IMS_VIDEO_CALLS_BOOL: String

For IMS video over LTE calls, determines whether video pause signalling is supported.

Value: "support_pause_ims_video_calls_bool"

KEY_SUPPORT_SWAP_AFTER_MERGE_BOOL

Added in API level 23
static val KEY_SUPPORT_SWAP_AFTER_MERGE_BOOL: String

After a CDMA conference call is merged, the swap button should be displayed.

Value: "support_swap_after_merge_bool"

KEY_SUPPORT_TDSCDMA_BOOL

Added in API level 30
static val KEY_SUPPORT_TDSCDMA_BOOL: String

Boolean to decide whether TD-SCDMA is supported.

Value: "support_tdscdma_bool"

KEY_SUPPORT_TDSCDMA_ROAMING_NETWORKS_STRING_ARRAY

Added in API level 30
static val KEY_SUPPORT_TDSCDMA_ROAMING_NETWORKS_STRING_ARRAY: String

A list of mcc/mnc that support TD-SCDMA for device when connect to the roaming network.

Value: "support_tdscdma_roaming_networks_string_array"

KEY_SWITCH_DATA_TO_PRIMARY_IF_PRIMARY_IS_OOS_BOOL

Added in API level 30
static val KEY_SWITCH_DATA_TO_PRIMARY_IF_PRIMARY_IS_OOS_BOOL: String

Controls whether to switch data to primary from opportunistic subscription if primary is out of service. This control only affects system or 1st party app initiated data switch, but will not override data switch initiated by privileged carrier apps This carrier config is used to disable this feature.

Value: "switch_data_to_primary_if_primary_is_oos_bool"

KEY_TREAT_DOWNGRADED_VIDEO_CALLS_AS_VIDEO_CALLS_BOOL

Added in API level 25
static val KEY_TREAT_DOWNGRADED_VIDEO_CALLS_AS_VIDEO_CALLS_BOOL: String

Flag indicating whether some telephony logic will treat a call which was formerly a video call as if it is still a video call. When true:

Logic which will automatically drop a video call which takes place over WIFI when a voice call is answered (see KEY_DROP_VIDEO_CALL_WHEN_ANSWERING_AUDIO_CALL_BOOL.

Logic which determines whether the user can use TTY calling.

Value: "treat_downgraded_video_calls_as_video_calls_bool"

KEY_TTY_SUPPORTED_BOOL

Added in API level 29
static val KEY_TTY_SUPPORTED_BOOL: String

Boolean flag indicating whether the carrier supports TTY.

Note that KEY_CARRIER_VOLTE_TTY_SUPPORTED_BOOL controls availability of TTY over VoLTE; if this carrier configuration is disabled, then KEY_CARRIER_VOLTE_TTY_SUPPORTED_BOOL is also implicitly disabled.

TelecomManager#isTtySupported() should be used to determine if a device supports TTY, and this carrier config key should be used to see if the current carrier supports it.

Value: "tty_supported_bool"

KEY_UNLOGGABLE_NUMBERS_STRING_ARRAY

Added in API level 30
static val KEY_UNLOGGABLE_NUMBERS_STRING_ARRAY: String

A string array containing numbers that shouldn't be included in the call log.

Value: "unloggable_numbers_string_array"

KEY_USE_ACS_FOR_RCS_BOOL

Added in API level 31
static val KEY_USE_ACS_FOR_RCS_BOOL: String

Indicates if auto-configuration server is used for the RCS config Reference: GSMA RCC.14

Value: "use_acs_for_rcs_bool"

KEY_USE_HFA_FOR_PROVISIONING_BOOL

Added in API level 23
static val KEY_USE_HFA_FOR_PROVISIONING_BOOL: String

CDMA activation goes through HFA

Value: "use_hfa_for_provisioning_bool"

KEY_USE_IP_FOR_CALLING_INDICATOR_BOOL

Added in API level 31
static val KEY_USE_IP_FOR_CALLING_INDICATOR_BOOL: String

Determines whether or not to use (IP) data connectivity as a supplemental condition to control the visibility of the no-calling indicator for this carrier in the System UI. Setting the configuration to true may make sense for carriers that provide OTT calling. Config = true: show no-calling indication only if telephony does not have voice registration and if no (IP) data connectivity is available. Config = false: show no-calling indication only if telephony does not have voice registration.

Value: "use_ip_for_calling_indicator_bool"

KEY_USE_OTASP_FOR_PROVISIONING_BOOL

Added in API level 23
static val KEY_USE_OTASP_FOR_PROVISIONING_BOOL: String

CDMA activation goes through OTASP.

Value: "use_otasp_for_provisioning_bool"

KEY_USE_RCS_PRESENCE_BOOL

Added in API level 24
Deprecated in API level 31
static val KEY_USE_RCS_PRESENCE_BOOL: String

Deprecated: No longer used in framework code, however it may still be used by applications that have not updated their code. This config should still be set to true if Ims#KEY_RCS_BULK_CAPABILITY_EXCHANGE_BOOL is set to true and Ims#KEY_ENABLE_PRESENCE_CAPABILITY_EXCHANGE_BOOL is set to true.

Flag indicating whether or not the carrier supports the periodic exchange of phone numbers in the user's address book with the carrier's presence server in order to retrieve the RCS capabilities for each contact used in the RCS User Capability Exchange (UCE) procedure. See RCC.71, section 3 for more information.

The flag Ims#KEY_ENABLE_PRESENCE_PUBLISH_BOOL must also be enabled if this flag is enabled, as sending a periodic SIP PUBLISH with this device's RCS capabilities is a requirement for capability exchange to begin.

When presence is supported, the device should use the android.provider.ContactsContract.Data#CARRIER_PRESENCE bit mask and set the android.provider.ContactsContract.Data#CARRIER_PRESENCE_VT_CAPABLE bit to indicate whether each contact supports video calling. The UI is made aware that presence is enabled via android.telecom.PhoneAccount#CAPABILITY_VIDEO_CALLING_RELIES_ON_PRESENCE and can choose to hide or show the video calling icon based on whether a contact supports video.

Value: "use_rcs_presence_bool"

KEY_USE_RCS_SIP_OPTIONS_BOOL

Added in API level 30
static val KEY_USE_RCS_SIP_OPTIONS_BOOL: String

Flag indicating whether the carrier supports RCS SIP OPTIONS indication for User Capability Exchange (UCE).

Value: "use_rcs_sip_options_bool"

KEY_USE_WFC_HOME_NETWORK_MODE_IN_ROAMING_NETWORK_BOOL

Added in API level 30
static val KEY_USE_WFC_HOME_NETWORK_MODE_IN_ROAMING_NETWORK_BOOL: String

Flag specifying whether the carrier will use the WFC home network mode in roaming network. false - roaming preference can be selected separately from the home preference. true - roaming preference is the same as home preference and KEY_CARRIER_DEFAULT_WFC_IMS_MODE_INT is used as the default value.

Value: "use_wfc_home_network_mode_in_roaming_network_bool"

KEY_VOICEMAIL_NOTIFICATION_PERSISTENT_BOOL

Added in API level 23
static val KEY_VOICEMAIL_NOTIFICATION_PERSISTENT_BOOL: String

Determine whether the voicemail notification is persistent in the notification bar. If true, the voicemail notifications cannot be dismissed from the notification bar.

Value: "voicemail_notification_persistent_bool"

KEY_VOICE_PRIVACY_DISABLE_UI_BOOL

Added in API level 23
static val KEY_VOICE_PRIVACY_DISABLE_UI_BOOL: String

If true, removes the Voice Privacy option from Call Settings

Value: "voice_privacy_disable_ui_bool"

KEY_VOLTE_REPLACEMENT_RAT_INT

Added in API level 23
static val KEY_VOLTE_REPLACEMENT_RAT_INT: String

If Voice Radio Technology is RIL_RADIO_TECHNOLOGY_LTE:14 or RIL_RADIO_TECHNOLOGY_UNKNOWN:0 this is the value that should be used instead. A configuration value of RIL_RADIO_TECHNOLOGY_UNKNOWN:0 means there is no replacement value and that the default assumption for phone type (GSM) should be used.

Value: "volte_replacement_rat_int"

KEY_VONR_ENABLED_BOOL

Added in API level 34
static val KEY_VONR_ENABLED_BOOL: String

Flag specifying whether VoNR should be enabled for carrier. If true, VoNr will be enabled. If false, hard disabled. Disabled by default.

Value: "vonr_enabled_bool"

KEY_VONR_ON_BY_DEFAULT_BOOL

Added in API level 34
static val KEY_VONR_ON_BY_DEFAULT_BOOL: String

Boolean indicating the default VoNR user preference setting. If true, the VoNR setting will be enabled. If false, it will be disabled initially. Enabled by default.

Value: "vonr_on_by_default_bool"

KEY_VONR_SETTING_VISIBILITY_BOOL

Added in API level 34
static val KEY_VONR_SETTING_VISIBILITY_BOOL: String

Boolean indicating if the VoNR setting is visible in the Call Settings menu. If this flag is set and VoNR is enabled for this carrier (see KEY_VONR_ENABLED_BOOL) the VoNR setting menu will be visible. If KEY_VONR_ENABLED_BOOL or this setting is false, the menu will be gone. Enabled by default.

Value: "vonr_setting_visibility_bool"

KEY_VT_UPGRADE_SUPPORTED_FOR_DOWNGRADED_RTT_CALL_BOOL

Added in API level 31
static val KEY_VT_UPGRADE_SUPPORTED_FOR_DOWNGRADED_RTT_CALL_BOOL: String

Indicates if the carrier supports upgrading a call that was previously an RTT call to VT.

Value: "vt_upgrade_supported_for_downgraded_rtt_call"

KEY_VVM_CELLULAR_DATA_REQUIRED_BOOL

Added in API level 24
static val KEY_VVM_CELLULAR_DATA_REQUIRED_BOOL: String

Whether cellular data is required to access visual voicemail.

Value: "vvm_cellular_data_required_bool"

KEY_VVM_CLIENT_PREFIX_STRING

Added in API level 26
static val KEY_VVM_CLIENT_PREFIX_STRING: String

The default OMTP visual voicemail client prefix to use. Defaulted to "//VVM"

Value: "vvm_client_prefix_string"

KEY_VVM_DESTINATION_NUMBER_STRING

Added in API level 23
static val KEY_VVM_DESTINATION_NUMBER_STRING: String

The carrier number mobile outgoing (MO) sms messages are sent to.

Value: "vvm_destination_number_string"

KEY_VVM_DISABLED_CAPABILITIES_STRING_ARRAY

Added in API level 26
static val KEY_VVM_DISABLED_CAPABILITIES_STRING_ARRAY: String

A set of capabilities that should not be used even if it is reported by the visual voicemail IMAP CAPABILITY command.

Value: "vvm_disabled_capabilities_string_array"

KEY_VVM_LEGACY_MODE_ENABLED_BOOL

Added in API level 26
static val KEY_VVM_LEGACY_MODE_ENABLED_BOOL: String

Whether legacy mode should be used when the visual voicemail client is disabled.

Legacy mode is a mode that on the carrier side visual voicemail is still activated, but on the client side all network operations are disabled. SMSs are still monitored so a new message SYNC SMS will be translated to show a message waiting indicator, like traditional voicemails.

This is for carriers that does not support VVM deactivation so voicemail can continue to function without the data cost.

Value: "vvm_legacy_mode_enabled_bool"

KEY_VVM_PORT_NUMBER_INT

Added in API level 23
static val KEY_VVM_PORT_NUMBER_INT: String

The port through which the mobile outgoing (MO) sms messages are sent through.

Value: "vvm_port_number_int"

KEY_VVM_PREFETCH_BOOL

Added in API level 24
static val KEY_VVM_PREFETCH_BOOL: String

Whether to prefetch audio data on new voicemail arrival, defaulted to true.

Value: "vvm_prefetch_bool"

KEY_VVM_SSL_ENABLED_BOOL

Added in API level 26
static val KEY_VVM_SSL_ENABLED_BOOL: String

Whether to use SSL to connect to the visual voicemail IMAP server. Defaulted to false.

Value: "vvm_ssl_enabled_bool"

KEY_VVM_TYPE_STRING

Added in API level 23
static val KEY_VVM_TYPE_STRING: String

The type of visual voicemail protocol the carrier adheres to. See TelephonyManager for possible values. For example TelephonyManager#VVM_TYPE_OMTP.

Value: "vvm_type_string"

KEY_WFC_EMERGENCY_ADDRESS_CARRIER_APP_STRING

Added in API level 30
static val KEY_WFC_EMERGENCY_ADDRESS_CARRIER_APP_STRING: String

The Component Name of the activity that can setup the emergency address for WiFi Calling as per carrier requirement.

Value: "wfc_emergency_address_carrier_app_string"

KEY_WORLD_MODE_ENABLED_BOOL

Added in API level 30
static val KEY_WORLD_MODE_ENABLED_BOOL: String

Boolean to decide whether world mode is enabled.

Value: "world_mode_enabled_bool"

KEY_WORLD_PHONE_BOOL

Added in API level 23
static val KEY_WORLD_PHONE_BOOL: String

Flag indicating if the phone is a world phone

Value: "world_phone_bool"

REMOVE_GROUP_UUID_STRING

Added in API level 33
static val REMOVE_GROUP_UUID_STRING: String

Passing this value as KEY_SUBSCRIPTION_GROUP_UUID_STRING will remove the subscription from a group instead of adding it to a group.

This value will work all the way back to android.os.Build.VERSION_CODES#Q.

Value: "00000000-0000-0000-0000-000000000000"

SERVICE_CLASS_NONE

Added in API level 31
static val SERVICE_CLASS_NONE: Int

Service class flag if no specific service class is specified. Reference: 3GPP TS 27.007 Section 7.4 Facility lock +CLCK

Value: 0

SERVICE_CLASS_VOICE

Added in API level 31
static val SERVICE_CLASS_VOICE: Int

Service class flag for voice telephony. Reference: 3GPP TS 27.007 Section 7.4 Facility lock +CLCK

Value: 1

USSD_OVER_CS_ONLY

Added in API level 31
static val USSD_OVER_CS_ONLY: Int

Only send USSD over CS. KEY_CARRIER_USSD_METHOD_INT

Value: 2

USSD_OVER_CS_PREFERRED

Added in API level 31
static val USSD_OVER_CS_PREFERRED: Int

Only send USSD over IMS while CS is out of service, otherwise send USSD over CS. KEY_CARRIER_USSD_METHOD_INT

Value: 0

USSD_OVER_IMS_ONLY

Added in API level 31
static val USSD_OVER_IMS_ONLY: Int

Only send USSD over IMS and disallow silent redial over CS. KEY_CARRIER_USSD_METHOD_INT

Value: 3

USSD_OVER_IMS_PREFERRED

Added in API level 31
static val USSD_OVER_IMS_PREFERRED: Int

Send USSD over IMS or CS while IMS is out of service or silent redial over CS if needed. KEY_CARRIER_USSD_METHOD_INT

Value: 1

Public methods

getConfig

Added in API level 23
Deprecated in API level 34
open fun getConfig(): PersistableBundle?

Deprecated: use getConfig(java.lang.String...) instead.

Gets the configuration values for the default subscription. After using this method to get the configuration bundle, isConfigForIdentifiedCarrier(android.os.PersistableBundle) should be called to confirm whether any carrier specific configuration has been applied.

Requires Permission: READ_PHONE_STATE, or the calling app has carrier privileges (see TelephonyManager#hasCarrierPrivileges()).
Requires android.Manifest.permission#READ_PHONE_STATE

Return
PersistableBundle? This value may be null.
Exceptions
java.lang.UnsupportedOperationException If the device does not have PackageManager#FEATURE_TELEPHONY_SUBSCRIPTION.

getConfig

Added in API level 34
open fun getConfig(vararg keys: String!): PersistableBundle

Gets the configuration values of the specified config keys applied for the default subscription.

If the value for the key can't be found, the returned bundle will filter the key out.

After using this method to get the configuration bundle, isConfigForIdentifiedCarrier(android.os.PersistableBundle) should be called to confirm whether any carrier specific configuration has been applied.

Note that on success, the key/value for KEY_CARRIER_CONFIG_VERSION_STRING and KEY_CARRIER_CONFIG_APPLIED_BOOL are always in the returned bundle, no matter if they were explicitly requested.

Requires Permission: READ_PHONE_STATE, or the calling app has carrier privileges for the default subscription (see TelephonyManager#hasCarrierPrivileges()).
Requires android.Manifest.permission#READ_PHONE_STATE or carrier privileges

Parameters
keys String!: The config keys to retrieve values This value cannot be null.
Return
PersistableBundle A PersistableBundle with key/value mapping for the specified carrier configs on success, or an empty (but never null) bundle on failure.
Exceptions
java.lang.UnsupportedOperationException If the device does not have PackageManager#FEATURE_TELEPHONY_SUBSCRIPTION.

getConfigByComponentForSubId

Added in API level 30
open fun getConfigByComponentForSubId(
    prefix: String,
    subId: Int
): PersistableBundle?

Gets the configuration values for a component using its prefix.

Requires Permission: READ_PHONE_STATE, or the calling app has carrier privileges (see TelephonyManager#hasCarrierPrivileges()).
Requires android.Manifest.permission#READ_PHONE_STATE

Parameters
prefix String: prefix of the component. This value cannot be null.
subId Int: the subscription ID, normally obtained from SubscriptionManager.
Return
PersistableBundle? This value may be null.
Exceptions
java.lang.UnsupportedOperationException If the device does not have PackageManager#FEATURE_TELEPHONY_SUBSCRIPTION.

See Also

    getConfigForSubId

    Added in API level 23
    Deprecated in API level 34
    open fun getConfigForSubId(subId: Int): PersistableBundle?

    Deprecated: Use getConfigForSubId(int,java.lang.String...) instead.

    Gets the configuration values for a particular subscription, which is associated with a specific SIM card. If an invalid subId is used, the returned config will contain default values. After using this method to get the configuration bundle, isConfigForIdentifiedCarrier(android.os.PersistableBundle) should be called to confirm whether any carrier specific configuration has been applied.

    Requires Permission: READ_PHONE_STATE, or the calling app has carrier privileges (see TelephonyManager#hasCarrierPrivileges()).
    Requires android.Manifest.permission#READ_PHONE_STATE

    Parameters
    subId Int: the subscription ID, normally obtained from SubscriptionManager.
    Return
    PersistableBundle? A PersistableBundle containing the config for the given subId, or default values for an invalid subId. This value may be null.
    Exceptions
    java.lang.UnsupportedOperationException If the device does not have PackageManager#FEATURE_TELEPHONY_SUBSCRIPTION.

    getConfigForSubId

    Added in API level 34
    open fun getConfigForSubId(
        subId: Int,
        vararg keys: String!
    ): PersistableBundle

    Gets the configuration values of the specified keys for a particular subscription.

    If an invalid subId is used, the returned configuration will contain default values for the specified keys. If the value for the key can't be found, the returned configuration will filter the key out.

    After using this method to get the configuration bundle, isConfigForIdentifiedCarrier(android.os.PersistableBundle) should be called to confirm whether any carrier specific configuration has been applied.

    Note that on success, the key/value for KEY_CARRIER_CONFIG_VERSION_STRING and KEY_CARRIER_CONFIG_APPLIED_BOOL are always in the returned bundle, no matter if they were explicitly requested.

    Requires Permission: READ_PHONE_STATE, or the calling app has carrier privileges on the specified subscription (see TelephonyManager#hasCarrierPrivileges()).
    Requires android.Manifest.permission#READ_PHONE_STATE or carrier privileges

    Parameters
    subId Int: The subscription ID on which the carrier config should be retrieved.
    keys String!: The carrier config keys to retrieve values. This value cannot be null.
    Return
    PersistableBundle A PersistableBundle with key/value mapping for the specified configuration on success, or an empty (but never null) bundle on failure (for example, when the calling app has no permission).
    Exceptions
    java.lang.UnsupportedOperationException If the device does not have PackageManager#FEATURE_TELEPHONY_SUBSCRIPTION.

    isConfigForIdentifiedCarrier

    Added in API level 28
    open static fun isConfigForIdentifiedCarrier(bundle: PersistableBundle!): Boolean

    Determines whether a configuration PersistableBundle obtained from getConfig() or getConfigForSubId(int) corresponds to an identified carrier.

    When an app receives the CarrierConfigManager#ACTION_CARRIER_CONFIG_CHANGED broadcast which informs it that the carrier configuration has changed, it is possible that another reload of the carrier configuration has begun since the intent was sent. In this case, the carrier configuration the app fetches (e.g. via getConfig()) may not represent the configuration for the current carrier. It should be noted that it does not necessarily mean the configuration belongs to current carrier when this function return true because it may belong to another previous identified carrier. Users should always call getConfig() or getConfigForSubId(int) after receiving the broadcast ACTION_CARRIER_CONFIG_CHANGED.

    After using getConfig() or getConfigForSubId(int) an app should always use this method to confirm whether any carrier specific configuration has been applied. Especially when an app misses the broadcast ACTION_CARRIER_CONFIG_CHANGED but it still needs to get the current configuration, it must use this method to verify whether the configuration is default or carrier overridden.

    Parameters
    bundle PersistableBundle!: the configuration bundle to be checked.
    Return
    Boolean boolean true if any carrier specific configuration bundle has been applied, false otherwise or the bundle is null.

    notifyConfigChangedForSubId

    Added in API level 23
    open fun notifyConfigChangedForSubId(subId: Int): Unit

    Calling this method triggers telephony services to fetch the current carrier configuration.

    Normally this does not need to be called because the platform reloads config on its own. This should be called by a carrier service app if it wants to update config at an arbitrary moment.

    Requires Permission: MODIFY_PHONE_STATE, or the calling app has carrier privileges (see TelephonyManager#hasCarrierPrivileges()).

    This method returns before the reload has completed, and android.service.carrier.CarrierService#onLoadConfig will be called from an arbitrary thread.
    Requires android.Manifest.permission#MODIFY_PHONE_STATE

    Exceptions
    java.lang.UnsupportedOperationException If the device does not have PackageManager#FEATURE_TELEPHONY_SUBSCRIPTION.

    registerCarrierConfigChangeListener

    Added in API level 34
    open fun registerCarrierConfigChangeListener(
        executor: Executor,
        listener: CarrierConfigManager.CarrierConfigChangeListener
    ): Unit

    Register a CarrierConfigChangeListener to get a notification when carrier configurations have changed.

    Parameters
    executor Executor: The executor on which the listener will be called. This value cannot be null. Callback and listener events are dispatched through this Executor, providing an easy way to control which thread is used. To dispatch events through the main thread of your application, you can use Context.getMainExecutor(). Otherwise, provide an Executor that dispatches to an appropriate thread.
    listener CarrierConfigManager.CarrierConfigChangeListener: The CarrierConfigChangeListener called when carrier configs has changed. This value cannot be null.

    unregisterCarrierConfigChangeListener

    Added in API level 34
    open fun unregisterCarrierConfigChangeListener(listener: CarrierConfigManager.CarrierConfigChangeListener): Unit

    Unregister the CarrierConfigChangeListener to stop notification on carrier configurations change.

    Parameters
    listener CarrierConfigManager.CarrierConfigChangeListener: The CarrierConfigChangeListener which was registered with method registerCarrierConfigChangeListener(java.util.concurrent.Executor,android.telephony.CarrierConfigManager.CarrierConfigChangeListener). This value cannot be null.