Added in API level 26

Builder


class Builder
kotlin.Any
   ↳ android.net.wifi.aware.PublishConfig.Builder

Builder used to build PublishConfig objects.

Summary

Public constructors

Public methods
PublishConfig!

Build PublishConfig given the current requests made on the builder.

PublishConfig.Builder

Configure security config for the Wi-Fi Aware publish session.

PublishConfig.Builder

Configure whether to enable and use instant communication for this publish session.

PublishConfig.Builder!

The match filter for a publish session.

PublishConfig.Builder

Set the AwarePairingConfig for this publish session, the peer can use this info to determine the config of the following bootstrapping, pairing setup/verification request.

PublishConfig.Builder!
setPublishType(publishType: Int)

Specify the type of the publish session: solicited (aka active - publish packets are transmitted over-the-air), or unsolicited (aka passive - no publish packets are transmitted, a match is made against an active subscribe session whose packets are transmitted over-the-air).

PublishConfig.Builder!

Configure whether the publish discovery session supports ranging and allows peers to measure distance to it.

PublishConfig.Builder!
setServiceName(serviceName: String)

Specify the service name of the publish session.

PublishConfig.Builder!
setServiceSpecificInfo(serviceSpecificInfo: ByteArray?)

Specify service specific information for the publish session.

PublishConfig.Builder!

Configure whether a publish terminate notification DiscoverySessionCallback#onSessionTerminated() is reported back to the callback.

PublishConfig.Builder!
setTtlSec(ttlSec: Int)

Sets the time interval (in seconds) an unsolicited ( PublishConfig.Builder#setPublishType(int)) publish session will be alive - broadcasting a packet.

Public constructors

Builder

Added in API level 26
Builder()

Public methods

build

Added in API level 26
fun build(): PublishConfig!

Build PublishConfig given the current requests made on the builder.

setDataPathSecurityConfig

Added in API level 33
fun setDataPathSecurityConfig(securityConfig: WifiAwareDataPathSecurityConfig): PublishConfig.Builder

Configure security config for the Wi-Fi Aware publish session. The security config set here must be the same as the one used to request Wi-Fi Aware data-path connection using WifiAwareNetworkSpecifier.Builder#setDataPathSecurityConfig(WifiAwareDataPathSecurityConfig). This security config will create a security identifier (SCID) which contains a PMKID and transmitted in the publish message. The device which subscribe this session can get this info by ServiceDiscoveryInfo#getScid() This method is optional - if not called, then no security context identifier will be passed in the publish message, then no security context identifier will be provided in the ServiceDiscoveryInfo on the subscriber. Security can still be negotiated using out-of-band (OOB) mechanisms.

Parameters
securityConfig WifiAwareDataPathSecurityConfig: The (optional) security config to be used to create security context Identifier This value cannot be null.
Return
PublishConfig.Builder the current Builder builder, enabling chaining of builder methods. This value cannot be null.

setInstantCommunicationModeEnabled

Added in API level 33
fun setInstantCommunicationModeEnabled(
    enabled: Boolean,
    band: Int
): PublishConfig.Builder

Configure whether to enable and use instant communication for this publish session. Instant communication will speed up service discovery and any data-path set up as part of this session. Use Characteristics#isInstantCommunicationModeSupported() to check if the device supports this feature.

Note: due to increased power requirements of this mode - it will only remain enabled for 30 seconds from the time the discovery session is started.

Parameters
enabled Boolean: true for enable instant communication mode, default is false.
band Int: When setting to ScanResult#WIFI_BAND_5_GHZ, device will try to enable instant communication mode on 5Ghz, but may fall back to 2.4Ghz due to regulatory requirements. Value is android.net.wifi.ScanResult#WIFI_BAND_24_GHZ, or android.net.wifi.ScanResult#WIFI_BAND_5_GHZ
Return
PublishConfig.Builder the current Builder builder, enabling chaining of builder methods. This value cannot be null.

setMatchFilter

Added in API level 26
fun setMatchFilter(matchFilter: MutableList<ByteArray!>?): PublishConfig.Builder!

The match filter for a publish session. Used to determine whether a service discovery occurred - in addition to relying on the service name.

Optional. Empty by default.

Parameters
matchFilter MutableList<ByteArray!>?: A list of match filter entries (each of which is an arbitrary byte array). This value may be null.
Return
PublishConfig.Builder! The builder to facilitate chaining builder.setXXX(..).setXXX(..).

setPairingConfig

Added in API level 34
fun setPairingConfig(config: AwarePairingConfig?): PublishConfig.Builder

Set the AwarePairingConfig for this publish session, the peer can use this info to determine the config of the following bootstrapping, pairing setup/verification request.

Parameters
config AwarePairingConfig?: The pairing config set to the peer. Only valid when Characteristics#isAwarePairingSupported() is true. This value may be null.
Return
PublishConfig.Builder the current Builder builder, enabling chaining of builder methods. This value cannot be null.

setPublishType

Added in API level 26
fun setPublishType(publishType: Int): PublishConfig.Builder!

Specify the type of the publish session: solicited (aka active - publish packets are transmitted over-the-air), or unsolicited (aka passive - no publish packets are transmitted, a match is made against an active subscribe session whose packets are transmitted over-the-air).

Parameters
publishType Int: Publish session type: PublishConfig#PUBLISH_TYPE_SOLICITED or PublishConfig#PUBLISH_TYPE_UNSOLICITED (the default). Value is android.net.wifi.aware.PublishConfig#PUBLISH_TYPE_UNSOLICITED, or android.net.wifi.aware.PublishConfig#PUBLISH_TYPE_SOLICITED
Return
PublishConfig.Builder! The builder to facilitate chaining builder.setXXX(..).setXXX(..).

setRangingEnabled

Added in API level 28
fun setRangingEnabled(enable: Boolean): PublishConfig.Builder!

Configure whether the publish discovery session supports ranging and allows peers to measure distance to it. This API is used in conjunction with SubscribeConfig.Builder#setMinDistanceMm(int) and SubscribeConfig.Builder#setMaxDistanceMm(int) to specify a minimum and/or maximum distance at which discovery will be triggered.

Optional. Disabled by default - i.e. any peer attempt to measure distance to this device will be refused and discovery will proceed without ranging constraints.

The device must support Wi-Fi RTT for this feature to be used. Feature support is checked as described in android.net.wifi.rtt.

Parameters
enable Boolean: If true, ranging is supported on request of the peer.
Return
PublishConfig.Builder! The builder to facilitate chaining builder.setXXX(..).setXXX(..).

setServiceName

Added in API level 26
fun setServiceName(serviceName: String): PublishConfig.Builder!

Specify the service name of the publish session. The actual on-air value is a 6 byte hashed representation of this string.

The Service Name is a UTF-8 encoded string from 1 to 255 bytes in length. The only acceptable single-byte UTF-8 symbols for a Service Name are alphanumeric values (A-Z, a-z, 0-9), the hyphen ('-'), the period ('.') and the underscore ('_'). All valid multi-byte UTF-8 characters are acceptable in a Service Name.

Note: for compatibility with devices running Android 11 or older, avoid using underscore ('_') symbol as a single-byte UTF-8 service name.

Must be called - an empty ServiceName is not valid.

Parameters
serviceName String: The service name for the publish session. This value cannot be null.
Return
PublishConfig.Builder! The builder to facilitate chaining builder.setXXX(..).setXXX(..).

setServiceSpecificInfo

Added in API level 26
fun setServiceSpecificInfo(serviceSpecificInfo: ByteArray?): PublishConfig.Builder!

Specify service specific information for the publish session. This is a free-form byte array available to the application to send additional information as part of the discovery operation - it will not be used to determine whether a publish/subscribe match occurs.

Optional. Empty by default.

Parameters
serviceSpecificInfo ByteArray?: A byte-array for the service-specific information field. This value may be null.
Return
PublishConfig.Builder! The builder to facilitate chaining builder.setXXX(..).setXXX(..).

setTerminateNotificationEnabled

Added in API level 26
fun setTerminateNotificationEnabled(enable: Boolean): PublishConfig.Builder!

Configure whether a publish terminate notification DiscoverySessionCallback#onSessionTerminated() is reported back to the callback.

Parameters
enable Boolean: If true the terminate callback will be called when the publish is terminated. Otherwise it will not be called.
Return
PublishConfig.Builder! The builder to facilitate chaining builder.setXXX(..).setXXX(..).

setTtlSec

Added in API level 26
fun setTtlSec(ttlSec: Int): PublishConfig.Builder!

Sets the time interval (in seconds) an unsolicited ( PublishConfig.Builder#setPublishType(int)) publish session will be alive - broadcasting a packet. When the TTL is reached an event will be generated for DiscoverySessionCallback#onSessionTerminated() [unless setTerminateNotificationEnabled(boolean) disables the callback].

Optional. 0 by default - indicating the session doesn't terminate on its own. Session will be terminated when DiscoverySession#close() is called.

Parameters
ttlSec Int: Lifetime of a publish session in seconds.
Return
PublishConfig.Builder! The builder to facilitate chaining builder.setXXX(..).setXXX(..).