MediaCodecVideoRenderer

Artifact: androidx.media3:media3-exoplayer

Kotlin |Java

@UnstableApi
class MediaCodecVideoRenderer : MediaCodecRenderer, VideoFrameReleaseControl.FrameTimingEvaluator

kotlin.Any
↳	androidx.media3.exoplayer.BaseRenderer
	↳	androidx.media3.exoplayer.mediacodec.MediaCodecRenderer
		↳	androidx.media3.exoplayer.video.MediaCodecVideoRenderer

Decodes and renders video using MediaCodec.

This renderer accepts the following messages sent via createMessage on the playback thread:

Message with type MSG_SET_VIDEO_OUTPUT to set the output. The message payload should be the target Surface, or null to clear the output. Other non-null payloads have the effect of clearing the output.
Message with type MSG_SET_VIDEO_OUTPUT_RESOLUTION to set the output resolution. The message payload should be the output resolution in Size.
Message with type MSG_SET_SCALING_MODE to set the video scaling mode. The message payload should be one of the integer scaling modes in C.VideoScalingMode. Note that the scaling mode only applies if the Surface targeted by this renderer is owned by a android.view.SurfaceView.
Message with type MSG_SET_CHANGE_FRAME_RATE_STRATEGY to set the strategy used to call setFrameRate.
Message with type MSG_SET_VIDEO_FRAME_METADATA_LISTENER to set a listener for metadata associated with frames being rendered. The message payload should be the , or null.

Summary

Nested types
`protected class MediaCodecVideoRenderer.CodecMaxValues`

Public constructors
`MediaCodecVideoRenderer( context: Context!, mediaCodecSelector: MediaCodecSelector! )`
`MediaCodecVideoRenderer( context: Context!, mediaCodecSelector: MediaCodecSelector!, allowedJoiningTimeMs: Long )`
`MediaCodecVideoRenderer( context: Context!, mediaCodecSelector: MediaCodecSelector!, allowedJoiningTimeMs: Long, eventHandler: Handler?, eventListener: VideoRendererEventListener?, maxDroppedFramesToNotify: Int )`
`MediaCodecVideoRenderer( context: Context!, mediaCodecSelector: MediaCodecSelector!, allowedJoiningTimeMs: Long, enableDecoderFallback: Boolean, eventHandler: Handler?, eventListener: VideoRendererEventListener?, maxDroppedFramesToNotify: Int )`
`MediaCodecVideoRenderer( context: Context!, codecAdapterFactory: MediaCodecAdapter.Factory!, mediaCodecSelector: MediaCodecSelector!, allowedJoiningTimeMs: Long, enableDecoderFallback: Boolean, eventHandler: Handler?, eventListener: VideoRendererEventListener?, maxDroppedFramesToNotify: Int )`
`MediaCodecVideoRenderer( context: Context!, codecAdapterFactory: MediaCodecAdapter.Factory!, mediaCodecSelector: MediaCodecSelector!, allowedJoiningTimeMs: Long, enableDecoderFallback: Boolean, eventHandler: Handler?, eventListener: VideoRendererEventListener?, maxDroppedFramesToNotify: Int, assumedMinimumCodecOperatingRate: Float )` Creates a new instance.
`MediaCodecVideoRenderer( context: Context!, codecAdapterFactory: MediaCodecAdapter.Factory!, mediaCodecSelector: MediaCodecSelector!, allowedJoiningTimeMs: Long, enableDecoderFallback: Boolean, eventHandler: Handler?, eventListener: VideoRendererEventListener?, maxDroppedFramesToNotify: Int, assumedMinimumCodecOperatingRate: Float, videoSinkProvider: VideoSinkProvider? )` Creates a new instance.

Public functions
`Unit`	`enableMayRenderStartOfStream()` Enables this renderer to render the start of the stream even if the state is not `STATE_STARTED` yet.
`java-static Int`	`getCodecMaxInputSize(codecInfo: MediaCodecInfo!, format: Format!)` Returns a maximum input size for a given codec and format.
`String!`	`getName()` Returns the name of this renderer, for logging and debugging purposes.
`Unit`	`handleMessage(@Renderer.MessageType messageType: Int, message: Any?)` Handles a message delivered to the target.
`Boolean`	`isEnded()` Whether the renderer is ready for the `ExoPlayer` instance to transition to `STATE_ENDED`.
`Boolean`	`isReady()` Whether the renderer is able to immediately render media from the current position.
`Unit`	`@CallSuper render(positionUs: Long, elapsedRealtimeUs: Long)` Incrementally renders the `SampleStream`.
`Unit`	`setPlaybackSpeed(currentPlaybackSpeed: Float, targetPlaybackSpeed: Float)` Indicates the playback speed to this renderer.
`Unit`	`setVideoEffects(effects: (Mutable)List<Effect!>!)` Sets the `video effects` to apply.
`Boolean`	`shouldDropFrame( earlyUs: Long, elapsedRealtimeUs: Long, isLastFrame: Boolean )` Returns whether the frame should be dropped.
`Boolean`	`shouldForceReleaseFrame(earlyUs: Long, elapsedSinceLastReleaseUs: Long)` Whether a frame should be forced for release.
`Boolean`	`shouldIgnoreFrame( earlyUs: Long, positionUs: Long, elapsedRealtimeUs: Long, isLastFrame: Boolean, treatDroppedBuffersAsSkipped: Boolean )` Returns whether this frame should be ignored.

Protected functions
`DecoderReuseEvaluation!`	`canReuseCodec( codecInfo: MediaCodecInfo!, oldFormat: Format!, newFormat: Format! )` Evaluates whether the existing `MediaCodec` can be kept for a new `Format`, and if it can whether it requires reconfiguration.
`Boolean`	`codecNeedsSetOutputSurfaceWorkaround(name: String!)` Returns whether the codec is known to implement `setOutputSurface` incorrectly.
`MediaCodecDecoderException!`	`createDecoderException(cause: Throwable!, codecInfo: MediaCodecInfo?)`
`Unit`	`dropOutputBuffer( codec: MediaCodecAdapter!, index: Int, presentationTimeUs: Long )` Drops the output buffer with the specified index.
`Int`	`getCodecBufferFlags(buffer: DecoderInputBuffer!)` Returns the flags that should be set on `queueInputBuffer` or `queueSecureInputBuffer` for this buffer.
`MediaCodecVideoRenderer.CodecMaxValues!`	`getCodecMaxValues( codecInfo: MediaCodecInfo!, format: Format!, streamFormats: Array<Format!>! )` Returns `CodecMaxValues` suitable for configuring a codec for `format` in a way that will allow possible adaptation to other compatible formats in `streamFormats`.
`Boolean`	`getCodecNeedsEosPropagation()` Returns whether the codec needs the renderer to propagate the end-of-stream signal directly, rather than by using an end-of-stream buffer queued to the codec.
`Float`	`getCodecOperatingRateV23( targetPlaybackSpeed: Float, format: Format!, streamFormats: Array<Format!>! )` Returns the `KEY_OPERATING_RATE` value for a given playback speed, current `Format` and set of possible stream formats.
`(Mutable)List<MediaCodecInfo!>!`	`getDecoderInfos( mediaCodecSelector: MediaCodecSelector!, format: Format!, requiresSecureDecoder: Boolean )` Returns a list of decoders that can decode media in the specified format, in priority order.
`java-static Int`	`getMaxInputSize(codecInfo: MediaCodecInfo!, format: Format!)` Returns a maximum input buffer size for a given `MediaCodec` and `Format`.
`MediaCodecAdapter.Configuration!`	`@TargetApi(value = 17) getMediaCodecConfiguration( codecInfo: MediaCodecInfo!, format: Format!, crypto: MediaCrypto?, codecOperatingRate: Float )` Returns the `MediaCodecAdapter.Configuration` that will be used to create and configure a `MediaCodec` to decode the given `Format` for a playback.
`MediaFormat!`	`@TargetApi(value = 21) getMediaFormat( format: Format!, codecMimeType: String!, codecMaxValues: MediaCodecVideoRenderer.CodecMaxValues!, codecOperatingRate: Float, deviceNeedsNoPostProcessWorkaround: Boolean, tunnelingAudioSessionId: Int )` Returns the framework `MediaFormat` that should be used to configure the decoder.
`Surface?`	`getSurface()` Returns the output surface.
`Unit`	`@TargetApi(value = 29) handleInputBufferSupplementalData(buffer: DecoderInputBuffer!)` Handles supplemental data associated with an input buffer.
`Boolean`	`maybeDropBuffersToKeyframe( positionUs: Long, treatDroppedBuffersAsSkipped: Boolean )` Drops frames from the current output buffer to the next keyframe at or before the playback position.
`Unit`	`onCodecError(codecError: Exception!)` Called when a codec error has occurred.
`Unit`	`onCodecInitialized( name: String!, configuration: MediaCodecAdapter.Configuration!, initializedTimestampMs: Long, initializationDurationMs: Long )` Called when a `MediaCodec` has been created and configured.
`Unit`	`onCodecReleased(name: String!)` Called when a `MediaCodec` has been released.
`Unit`	`onDisabled()` Called when the renderer is disabled.
`Unit`	`onEnabled(joining: Boolean, mayRenderStartOfStream: Boolean)` Called when the renderer is enabled.
`Unit`	`onInit()` Called when the renderer is initialized.
`DecoderReuseEvaluation?`	`onInputFormatChanged(formatHolder: FormatHolder!)` Called when a new `Format` is read from the upstream `MediaPeriod`.
`Unit`	`onOutputFormatChanged(format: Format!, mediaFormat: MediaFormat?)` Called when one of the output formats changes.
`Unit`	`onPositionReset(positionUs: Long, joining: Boolean)` Called when the position is reset.
`Unit`	`@CallSuper onProcessedOutputBuffer(presentationTimeUs: Long)` Called when an output buffer is successfully processed.
`Unit`	`onProcessedStreamChange()` Called after the last output buffer before a stream change has been processed.
`Unit`	`onProcessedTunneledBuffer(presentationTimeUs: Long)` Called when a buffer was processed in tunneling mode.
`Unit`	`@CallSuper onQueueInputBuffer(buffer: DecoderInputBuffer!)` Called immediately before an input buffer is queued into the codec.
`Unit`	`@CallSuper onReadyToInitializeCodec(format: Format!)` Called when ready to initialize the `MediaCodecAdapter`.
`Unit`	`onReadyToRegisterVideoSinkInputStream()` Called when ready to `register` an input stream when `video effects` are enabled.
`Unit`	`onRelease()` Called when the renderer is released.
`Unit`	`@TargetApi(value = 17) onReset()` Called when the renderer is reset.
`Unit`	`onStarted()` Called when the renderer is started.
`Unit`	`onStopped()` Called when the renderer is stopped.
`Boolean`	`processOutputBuffer( positionUs: Long, elapsedRealtimeUs: Long, codec: MediaCodecAdapter?, buffer: ByteBuffer?, bufferIndex: Int, bufferFlags: Int, sampleCount: Int, bufferPresentationTimeUs: Long, isDecodeOnlyBuffer: Boolean, isLastBuffer: Boolean, format: Format! )` Processes an output media buffer.
`Unit`	`renderOutputBuffer( codec: MediaCodecAdapter!, index: Int, presentationTimeUs: Long )` Renders the output buffer with the specified index.
`Unit`	`@RequiresApi(value = 21) renderOutputBufferV21( codec: MediaCodecAdapter!, index: Int, presentationTimeUs: Long, releaseTimeNs: Long )` Renders the output buffer with the specified index.
`Unit`	`@CallSuper resetCodecStateForFlush()` Resets the renderer internal state after a codec flush.
`Unit`	`@RequiresApi(value = 23) setOutputSurfaceV23(codec: MediaCodecAdapter!, surface: Surface!)`
`Boolean`	`shouldDropBuffersToKeyframe( earlyUs: Long, elapsedRealtimeUs: Long, isLastBuffer: Boolean )` Returns whether to drop all buffers from the buffer being processed to the keyframe at or after the current playback position, if possible.
`Boolean`	`shouldDropOutputBuffer( earlyUs: Long, elapsedRealtimeUs: Long, isLastBuffer: Boolean )` Returns whether the buffer being processed should be dropped.
`Boolean`	`shouldForceRenderOutputBuffer( earlyUs: Long, elapsedSinceLastRenderUs: Long )` Returns whether to force rendering an output buffer.
`Boolean`	`shouldInitCodec(codecInfo: MediaCodecInfo!)`
`Boolean`	`shouldSkipBuffersWithIdenticalReleaseTime()` Returns whether to skip buffers that have an identical release time as the previous released buffer.
`Unit`	`skipOutputBuffer( codec: MediaCodecAdapter!, index: Int, presentationTimeUs: Long )` Skips the output buffer with the specified index.
`Int`	`@RendererCapabilities.Capabilities supportsFormat(mediaCodecSelector: MediaCodecSelector!, format: Format!)` Returns the `Capabilities` for the given `Format`.
`Unit`	`updateDroppedBufferCounters( droppedInputBufferCount: Int, droppedDecoderBufferCount: Int )` Updates local counters and `decoderCounters` to reflect that buffers were dropped.
`Unit`	`updateVideoFrameProcessingOffsetCounters(processingOffsetUs: Long)` Updates local counters and `DecoderCounters` with a new video frame processing offset.

Inherited Constants

From androidx.media3.exoplayer.mediacodec.MediaCodecRenderer

const Float

CODEC_OPERATING_RATE_UNSET = -1.0f

Indicates no codec operating rate should be set.

From androidx.media3.exoplayer.Renderer

`const Int`	`MSG_CUSTOM_BASE = 10000` Applications or extensions may define custom `MSG_*` constants that can be passed to renderers.
`const Int`	`MSG_SET_AUDIO_ATTRIBUTES = 3` A type of a message that can be passed to an audio renderer via `createMessage`.
`const Int`	`MSG_SET_AUDIO_SESSION_ID = 10` The type of a message that can be passed to audio and video renderers via `createMessage`.
`const Int`	`MSG_SET_AUX_EFFECT_INFO = 6` A type of a message that can be passed to an audio renderer via `createMessage`.
`const Int`	`MSG_SET_CAMERA_MOTION_LISTENER = 8` The type of a message that can be passed to a camera motion renderer via `createMessage`.
`const Int`	`MSG_SET_CHANGE_FRAME_RATE_STRATEGY = 5` The type of a message that can be passed to a video renderer via `createMessage`.
`const Int`	`MSG_SET_IMAGE_OUTPUT = 15` The type of message that can be passed to an image renderer to set a desired image output.
`const Int`	`MSG_SET_PREFERRED_AUDIO_DEVICE = 12` The type of a message that can be passed to audio renderers via `createMessage`.
`const Int`	`MSG_SET_SCALING_MODE = 4` The type of a message that can be passed to a `MediaCodec`-based video renderer via `createMessage`.
`const Int`	`MSG_SET_SKIP_SILENCE_ENABLED = 9` The type of a message that can be passed to an audio renderer via `createMessage`.
`const Int`	`MSG_SET_VIDEO_EFFECTS = 13` The type of a message that can be passed to a video renderer.
`const Int`	`MSG_SET_VIDEO_FRAME_METADATA_LISTENER = 7` The type of a message that can be passed to a video renderer via `createMessage`.
`const Int`	`MSG_SET_VIDEO_OUTPUT = 1` The type of a message that can be passed to a video renderer via `createMessage`.
`const Int`	`MSG_SET_VIDEO_OUTPUT_RESOLUTION = 14` The type of a message that can be passed to a video renderer to set the desired output resolution.
`const Int`	`MSG_SET_VOLUME = 2` A type of a message that can be passed to an audio renderer via `createMessage`.
`const Int`	`MSG_SET_WAKEUP_LISTENER = 11` The type of a message that can be passed to a `Renderer` via `createMessage`, to inform the renderer that it can schedule waking up another component.
`const Int`	`STATE_DISABLED = 0` The renderer is disabled.
`const Int`	`STATE_ENABLED = 1` The renderer is enabled but not started.
`const Int`	`STATE_STARTED = 2` The renderer is started.

From androidx.media3.exoplayer.RendererCapabilities

`const Int`	`ADAPTIVE_NOT_SEAMLESS = 8` The `Renderer` can adapt between formats, but may suffer a brief discontinuity (~50-100ms) when adaptation occurs.
`const Int`	`ADAPTIVE_NOT_SUPPORTED = 0` The `Renderer` does not support adaptation between formats.
`const Int`	`ADAPTIVE_SEAMLESS = 16` The `Renderer` can seamlessly adapt between formats.
`const Int`	`ADAPTIVE_SUPPORT_MASK = 24` A mask to apply to `Capabilities` to obtain the `AdaptiveSupport` only.
`const Int`	`AUDIO_OFFLOAD_GAPLESS_SUPPORTED = 1024` The renderer supports audio offload and gapless transitions with this format.
`const Int`	`AUDIO_OFFLOAD_NOT_SUPPORTED = 0` Audio offload is not supported with this format.
`const Int`	`AUDIO_OFFLOAD_SPEED_CHANGE_SUPPORTED = 2048` The renderer supports audio offload and speed changes with this format.
`const Int`	`AUDIO_OFFLOAD_SUPPORTED = 512` The renderer supports audio offload with this format.
`const Int`	`AUDIO_OFFLOAD_SUPPORT_MASK = 3584` A mask to apply to `Capabilities` to obtain `AudioOffloadSupport` only.
`const Int`	`DECODER_SUPPORT_FALLBACK = 0` The format exceeds the primary decoder's capabilities but is supported by fallback decoder
`const Int`	`DECODER_SUPPORT_FALLBACK_MIMETYPE = 256` The format's MIME type is unsupported and the renderer may use a decoder for a fallback MIME type.
`const Int`	`DECODER_SUPPORT_MASK = 384` A mask to apply to `Capabilities` to obtain `DecoderSupport` only.
`const Int`	`DECODER_SUPPORT_PRIMARY = 128` The renderer is able to use the primary decoder for the format's MIME type.
`const Int`	`FORMAT_EXCEEDS_CAPABILITIES = 3` This property is deprecated. Use `FORMAT_EXCEEDS_CAPABILITIES` instead.
`const Int`	`FORMAT_HANDLED = 4` This property is deprecated. Use `FORMAT_HANDLED` instead.
`const Int`	`FORMAT_SUPPORT_MASK = 7` A mask to apply to `Capabilities` to obtain the `C.FormatSupport` only.
`const Int`	`FORMAT_UNSUPPORTED_DRM = 2` This property is deprecated. Use `FORMAT_UNSUPPORTED_DRM` instead.
`const Int`	`FORMAT_UNSUPPORTED_SUBTYPE = 1` This property is deprecated. Use `FORMAT_UNSUPPORTED_SUBTYPE` instead.
`const Int`	`FORMAT_UNSUPPORTED_TYPE = 0` This property is deprecated. Use `FORMAT_UNSUPPORTED_TYPE` instead.
`const Int`	`HARDWARE_ACCELERATION_NOT_SUPPORTED = 0` The renderer is not able to use hardware acceleration.
`const Int`	`HARDWARE_ACCELERATION_SUPPORTED = 64` The renderer is able to use hardware acceleration.
`const Int`	`HARDWARE_ACCELERATION_SUPPORT_MASK = 64` A mask to apply to `Capabilities` to obtain `HardwareAccelerationSupport` only.
`const Int`	`TUNNELING_NOT_SUPPORTED = 0` The `Renderer` does not support tunneled output.
`const Int`	`TUNNELING_SUPPORTED = 32` The `Renderer` supports tunneled output.
`const Int`	`TUNNELING_SUPPORT_MASK = 32` A mask to apply to `Capabilities` to obtain `TunnelingSupport` only.

Inherited functions

From androidx.media3.exoplayer.BaseRenderer

`Unit`	`clearListener()` Clears the `Listener`.
`ExoPlaybackException!`	`createRendererException( cause: Throwable!, format: Format?, @PlaybackException.ErrorCode errorCode: Int )` Creates an `ExoPlaybackException` of type `TYPE_RENDERER` for this renderer.
`ExoPlaybackException!`	`createRendererException( cause: Throwable!, format: Format?, isRecoverable: Boolean, @PlaybackException.ErrorCode errorCode: Int )` Creates an `ExoPlaybackException` of type `TYPE_RENDERER` for this renderer.
`Unit`	`disable()` Disable the renderer, transitioning it to the `STATE_DISABLED` state.
`Unit`	`enable( configuration: RendererConfiguration!, formats: Array<Format!>!, stream: SampleStream!, positionUs: Long, joining: Boolean, mayRenderStartOfStream: Boolean, startPositionUs: Long, offsetUs: Long, mediaPeriodId: MediaSource.MediaPeriodId! )` Enables the renderer to consume from the specified `SampleStream`.
`RendererCapabilities!`	`getCapabilities()` Returns the capabilities of the renderer.
`MediaClock?`	`getMediaClock()` If the renderer advances its own playback position then this method returns a corresponding `MediaClock`.
`Boolean`	`hasReadStreamToEnd()` Returns whether the renderer has read the current `SampleStream` to the end.
`Unit`	`init(index: Int, playerId: PlayerId!, clock: Clock!)` Initializes the renderer for playback with a player.
`Boolean`	`isCurrentStreamFinal()` Returns whether the current `SampleStream` will be the final one supplied before the renderer is next disabled or reset.
`Boolean`	`isSourceReady()` Returns whether the upstream source is ready.
`Unit`	`maybeThrowStreamError()` Throws an error that's preventing the renderer from reading from its `SampleStream`.
`Unit`	`onRendererCapabilitiesChanged()` Called when the renderer capabilities are changed.
`Unit`	`onTimelineChanged(timeline: Timeline!)` Called when a new timeline is `set`.
`Int`	`@SampleStream.ReadDataResult readSource( formatHolder: FormatHolder!, buffer: DecoderInputBuffer!, @SampleStream.ReadFlags readFlags: Int )` Reads from the enabled upstream source.
`Unit`	`release()` Releases the renderer.
`Unit`	`replaceStream( formats: Array<Format!>!, stream: SampleStream!, startPositionUs: Long, offsetUs: Long, mediaPeriodId: MediaSource.MediaPeriodId! )` Replaces the `SampleStream` from which samples will be consumed.
`Unit`	`reset()` Forces the renderer to give up any resources (e.g. media decoders) that it may be holding.
`Unit`	`resetPosition(positionUs: Long)` Signals to the renderer that a position discontinuity has occurred.
`Unit`	`setCurrentStreamFinal()` Signals to the renderer that the current `SampleStream` will be the final one supplied before it is next disabled or reset.
`Unit`	`setListener(listener: RendererCapabilities.Listener!)` Sets the `Listener`.
`Int`	`skipSource(positionUs: Long)` Attempts to skip to the keyframe before the specified position, or to the end of the stream if `positionUs` is beyond it.
`Unit`	`start()` Starts the renderer, meaning that calls to `render` will cause media to be rendered.
`Unit`	`stop()` Stops the renderer, transitioning it to the `STATE_ENABLED` state.

From androidx.media3.exoplayer.mediacodec.MediaCodecRenderer

`Boolean`	`flushOrReinitializeCodec()` Flushes the codec.
`Boolean`	`flushOrReleaseCodec()` Flushes the codec.
`Long`	`getOutputStreamOffsetUs()` Returns the offset that should be subtracted from `bufferPresentationTimeUs` in `processOutputBuffer` to get the playback position with respect to the media.
`Long`	`getOutputStreamStartPositionUs()` Returns the start position of the current output stream in microseconds.
`Float`	`getPlaybackSpeed()` Returns the current playback speed, as set by `setPlaybackSpeed`.
`Boolean`	`isBypassEnabled()` Returns whether bypass is enabled by the renderer.
`Boolean`	`isBypassPossible(format: Format!)` Returns whether buffers in the input format can be processed without a codec.
`Unit`	`maybeInitCodecOrBypass()`
`Unit`	`onOutputStreamOffsetUsChanged(outputStreamOffsetUs: Long)` Called after the output stream offset changes.
`Unit`	`onStreamChanged( formats: Array<Format!>!, startPositionUs: Long, offsetUs: Long, mediaPeriodId: MediaSource.MediaPeriodId! )` Called when the renderer's stream has changed.
`Unit`	`releaseCodec()`
`Unit`	`renderToEndOfStream()` Incrementally renders any remaining output.
`Unit`	`@CallSuper resetCodecStateForRelease()` Resets the renderer internal state after a codec release.
`Unit`	`setPendingOutputEndOfStream()` Notifies the renderer that output end of stream is pending and should be handled on the next render.
`Unit`	`setPendingPlaybackException(exception: ExoPlaybackException!)` Sets an exception to be re-thrown by render.
`Unit`	`setRenderTimeLimitMs(renderTimeLimitMs: Long)` Sets a limit on the time a single `render` call can spend draining and filling the decoder.
`Boolean`	`shouldReinitCodec()` Returns whether the renderer needs to re-initialize the codec, possibly as a result of a change in device capabilities.
`Boolean`	`shouldUseBypass(format: Format!)` Returns whether buffers in the input format can be processed without a codec.
`Int`	`@RendererCapabilities.Capabilities supportsFormat(format: Format!)` Returns the extent to which the `Renderer` supports a given format.
`java-static Boolean`	`supportsFormatDrm(format: Format!)` Returns whether this renderer supports the given `Format's` DRM scheme.
`Int`	`@RendererCapabilities.AdaptiveSupport supportsMixedMimeTypeAdaptation()` Returns the extent to which the `Renderer` supports adapting between supported formats that have different MIME types.
`Boolean`	`updateCodecOperatingRate()` Updates the codec operating rate, or triggers codec release and re-initialization if a previously set operating rate needs to be cleared.
`Unit`	`updateOutputFormatForTime(presentationTimeUs: Long)` Updates the output formats for the specified output buffer timestamp, calling `onOutputFormatChanged` if a change has occurred.

From androidx.media3.exoplayer.Renderer

`abstract Unit`	`enable( configuration: RendererConfiguration!, formats: Array<Format!>!, stream: SampleStream!, positionUs: Long, joining: Boolean, mayRenderStartOfStream: Boolean, startPositionUs: Long, offsetUs: Long, mediaPeriodId: MediaSource.MediaPeriodId! )` Enables the renderer to consume from the specified `SampleStream`.
`abstract Unit`	`replaceStream( formats: Array<Format!>!, stream: SampleStream!, startPositionUs: Long, offsetUs: Long, mediaPeriodId: MediaSource.MediaPeriodId! )` Replaces the `SampleStream` from which samples will be consumed.

From androidx.media3.exoplayer.RendererCapabilities

`java-static Int`	`@RendererCapabilities.Capabilities create(@C.FormatSupport formatSupport: Int)` Returns `Capabilities` for the given `C.FormatSupport`.
`java-static Int`	`@RendererCapabilities.Capabilities create( @C.FormatSupport formatSupport: Int, @RendererCapabilities.AdaptiveSupport adaptiveSupport: Int, @RendererCapabilities.TunnelingSupport tunnelingSupport: Int )` Returns `Capabilities` combining the given `C.FormatSupport`, and `TunnelingSupport`.
`java-static Int`	`@RendererCapabilities.Capabilities create( @C.FormatSupport formatSupport: Int, @RendererCapabilities.AdaptiveSupport adaptiveSupport: Int, @RendererCapabilities.TunnelingSupport tunnelingSupport: Int, @RendererCapabilities.AudioOffloadSupport audioOffloadSupport: Int )` Returns `Capabilities` combining the given `C.FormatSupport`, , `TunnelingSupport`, and `AudioOffloadSupport`.
`java-static Int`	`@RendererCapabilities.Capabilities create( @C.FormatSupport formatSupport: Int, @RendererCapabilities.AdaptiveSupport adaptiveSupport: Int, @RendererCapabilities.TunnelingSupport tunnelingSupport: Int, @RendererCapabilities.HardwareAccelerationSupport hardwareAccelerationSupport: Int, @RendererCapabilities.DecoderSupport decoderSupport: Int )` Returns `Capabilities` combining the given `C.FormatSupport`, , `TunnelingSupport`, `HardwareAccelerationSupport`, and .
`java-static Int`	`@RendererCapabilities.Capabilities create( @C.FormatSupport formatSupport: Int, @RendererCapabilities.AdaptiveSupport adaptiveSupport: Int, @RendererCapabilities.TunnelingSupport tunnelingSupport: Int, @RendererCapabilities.HardwareAccelerationSupport hardwareAccelerationSupport: Int, @RendererCapabilities.DecoderSupport decoderSupport: Int, @RendererCapabilities.AudioOffloadSupport audioOffloadSupport: Int )` Returns `Capabilities` combining the given `C.FormatSupport`, , `TunnelingSupport`, `HardwareAccelerationSupport`, and `AudioOffloadSupport`.
`java-static Int`	`@RendererCapabilities.AdaptiveSupport getAdaptiveSupport(@RendererCapabilities.Capabilities supportFlags: Int)` Returns the `AdaptiveSupport` from the combined `Capabilities`.
`java-static Int`	`@RendererCapabilities.AudioOffloadSupport getAudioOffloadSupport( @RendererCapabilities.Capabilities supportFlags: Int )` Returns the `AudioOffloadSupport` from the combined `Capabilities`.
`java-static Int`	`@RendererCapabilities.DecoderSupport getDecoderSupport(@RendererCapabilities.Capabilities supportFlags: Int)` Returns the `DecoderSupport` from the combined `Capabilities`.
`java-static Int`	`@C.FormatSupport getFormatSupport(@RendererCapabilities.Capabilities supportFlags: Int)` Returns the `C.FormatSupport` from the combined `Capabilities`.
`java-static Int`	`@RendererCapabilities.HardwareAccelerationSupport getHardwareAccelerationSupport( @RendererCapabilities.Capabilities supportFlags: Int )` Returns the `HardwareAccelerationSupport` from the combined `Capabilities`.
`java-static Int`	`@RendererCapabilities.TunnelingSupport getTunnelingSupport(@RendererCapabilities.Capabilities supportFlags: Int)` Returns the `TunnelingSupport` from the combined `Capabilities`.
`Unit`	`setListener(listener: RendererCapabilities.Listener!)` Sets the `Listener`.

Inherited properties

From androidx.media3.exoplayer.BaseRenderer

`@MonotonicNonNull Clock!`	`@MonotonicNonNull clock`
`RendererConfiguration?`	`configuration`
`FormatHolder!`	`formatHolder`
`Int`	`index`
`Long`	`lastResetPositionUs`
`@MonotonicNonNull PlayerId!`	`@MonotonicNonNull playerId`
`Long`	`readingPositionUs`
`Int`	`state`
`SampleStream?`	`stream`
`Array<Format!>?`	`streamFormats`
`Timeline!`	`timeline`
`Int`	`@C.TrackType trackType`

From androidx.media3.exoplayer.mediacodec.MediaCodecRenderer

`MediaCodecAdapter?`	`codec`
`MediaCodecInfo?`	`codecInfo`
`Float`	`codecOperatingRate`
`MediaFormat?`	`codecOutputMediaFormat`
`DecoderCounters!`	`decoderCounters`

Public constructors

MediaCodecVideoRenderer

MediaCodecVideoRenderer(
    context: Context!,
    mediaCodecSelector: MediaCodecSelector!
)

Parameters
`context: Context!`	A context.
`mediaCodecSelector: MediaCodecSelector!`	A decoder selector.

MediaCodecVideoRenderer

MediaCodecVideoRenderer(
    context: Context!,
    mediaCodecSelector: MediaCodecSelector!,
    allowedJoiningTimeMs: Long
)

Parameters
`context: Context!`	A context.
`mediaCodecSelector: MediaCodecSelector!`	A decoder selector.
`allowedJoiningTimeMs: Long`	The maximum duration in milliseconds for which this video renderer can attempt to seamlessly join an ongoing playback.

MediaCodecVideoRenderer

MediaCodecVideoRenderer(
    context: Context!,
    mediaCodecSelector: MediaCodecSelector!,
    allowedJoiningTimeMs: Long,
    eventHandler: Handler?,
    eventListener: VideoRendererEventListener?,
    maxDroppedFramesToNotify: Int
)

Parameters
`context: Context!`	A context.
`mediaCodecSelector: MediaCodecSelector!`	A decoder selector.
`allowedJoiningTimeMs: Long`	The maximum duration in milliseconds for which this video renderer can attempt to seamlessly join an ongoing playback.
`eventHandler: Handler?`	A handler to use when delivering events to `eventListener`. May be null if delivery of events is not required.
`eventListener: VideoRendererEventListener?`	A listener of events. May be null if delivery of events is not required.
`maxDroppedFramesToNotify: Int`	The maximum number of frames that can be dropped between invocations of `onDroppedFrames`.

MediaCodecVideoRenderer

MediaCodecVideoRenderer(
    context: Context!,
    mediaCodecSelector: MediaCodecSelector!,
    allowedJoiningTimeMs: Long,
    enableDecoderFallback: Boolean,
    eventHandler: Handler?,
    eventListener: VideoRendererEventListener?,
    maxDroppedFramesToNotify: Int
)

Parameters
`context: Context!`	A context.
`mediaCodecSelector: MediaCodecSelector!`	A decoder selector.
`allowedJoiningTimeMs: Long`	The maximum duration in milliseconds for which this video renderer can attempt to seamlessly join an ongoing playback.
`enableDecoderFallback: Boolean`	Whether to enable fallback to lower-priority decoders if decoder initialization fails. This may result in using a decoder that is slower/less efficient than the primary decoder.
`eventHandler: Handler?`	A handler to use when delivering events to `eventListener`. May be null if delivery of events is not required.
`eventListener: VideoRendererEventListener?`	A listener of events. May be null if delivery of events is not required.
`maxDroppedFramesToNotify: Int`	The maximum number of frames that can be dropped between invocations of `onDroppedFrames`.

MediaCodecVideoRenderer

MediaCodecVideoRenderer(
    context: Context!,
    codecAdapterFactory: MediaCodecAdapter.Factory!,
    mediaCodecSelector: MediaCodecSelector!,
    allowedJoiningTimeMs: Long,
    enableDecoderFallback: Boolean,
    eventHandler: Handler?,
    eventListener: VideoRendererEventListener?,
    maxDroppedFramesToNotify: Int
)

Parameters
`context: Context!`	A context.
`codecAdapterFactory: MediaCodecAdapter.Factory!`	The `MediaCodecAdapter.Factory` used to create instances.
`mediaCodecSelector: MediaCodecSelector!`	A decoder selector.
`allowedJoiningTimeMs: Long`	The maximum duration in milliseconds for which this video renderer can attempt to seamlessly join an ongoing playback.
`enableDecoderFallback: Boolean`	Whether to enable fallback to lower-priority decoders if decoder initialization fails. This may result in using a decoder that is slower/less efficient than the primary decoder.
`eventHandler: Handler?`	A handler to use when delivering events to `eventListener`. May be null if delivery of events is not required.
`eventListener: VideoRendererEventListener?`	A listener of events. May be null if delivery of events is not required.
`maxDroppedFramesToNotify: Int`	The maximum number of frames that can be dropped between invocations of `onDroppedFrames`.

MediaCodecVideoRenderer

MediaCodecVideoRenderer(
    context: Context!,
    codecAdapterFactory: MediaCodecAdapter.Factory!,
    mediaCodecSelector: MediaCodecSelector!,
    allowedJoiningTimeMs: Long,
    enableDecoderFallback: Boolean,
    eventHandler: Handler?,
    eventListener: VideoRendererEventListener?,
    maxDroppedFramesToNotify: Int,
    assumedMinimumCodecOperatingRate: Float
)

Creates a new instance.

Parameters
`context: Context!`	A context.
`codecAdapterFactory: MediaCodecAdapter.Factory!`	The `MediaCodecAdapter.Factory` used to create instances.
`mediaCodecSelector: MediaCodecSelector!`	A decoder selector.
`allowedJoiningTimeMs: Long`	The maximum duration in milliseconds for which this video renderer can attempt to seamlessly join an ongoing playback.
`enableDecoderFallback: Boolean`	Whether to enable fallback to lower-priority decoders if decoder initialization fails. This may result in using a decoder that is slower/less efficient than the primary decoder.
`eventHandler: Handler?`	A handler to use when delivering events to `eventListener`. May be null if delivery of events is not required.
`eventListener: VideoRendererEventListener?`	A listener of events. May be null if delivery of events is not required.
`maxDroppedFramesToNotify: Int`	The maximum number of frames that can be dropped between invocations of `onDroppedFrames`.
`assumedMinimumCodecOperatingRate: Float`	A codec operating rate that all codecs instantiated by this renderer are assumed to meet implicitly (i.e. without the operating rate being set explicitly using `KEY_OPERATING_RATE`).

MediaCodecVideoRenderer

MediaCodecVideoRenderer(
    context: Context!,
    codecAdapterFactory: MediaCodecAdapter.Factory!,
    mediaCodecSelector: MediaCodecSelector!,
    allowedJoiningTimeMs: Long,
    enableDecoderFallback: Boolean,
    eventHandler: Handler?,
    eventListener: VideoRendererEventListener?,
    maxDroppedFramesToNotify: Int,
    assumedMinimumCodecOperatingRate: Float,
    videoSinkProvider: VideoSinkProvider?
)

Creates a new instance.

Parameters
`context: Context!`	A context.
`codecAdapterFactory: MediaCodecAdapter.Factory!`	The `MediaCodecAdapter.Factory` used to create instances.
`mediaCodecSelector: MediaCodecSelector!`	A decoder selector.
`allowedJoiningTimeMs: Long`	The maximum duration in milliseconds for which this video renderer can attempt to seamlessly join an ongoing playback.
`enableDecoderFallback: Boolean`	Whether to enable fallback to lower-priority decoders if decoder initialization fails. This may result in using a decoder that is slower/less efficient than the primary decoder.
`eventHandler: Handler?`	A handler to use when delivering events to `eventListener`. May be null if delivery of events is not required.
`eventListener: VideoRendererEventListener?`	A listener of events. May be null if delivery of events is not required.
`maxDroppedFramesToNotify: Int`	The maximum number of frames that can be dropped between invocations of `onDroppedFrames`.
`assumedMinimumCodecOperatingRate: Float`	A codec operating rate that all codecs instantiated by this renderer are assumed to meet implicitly (i.e. without the operating rate being set explicitly using `KEY_OPERATING_RATE`).
`videoSinkProvider: VideoSinkProvider?`	The `VideoSinkProvider` that will used be used for applying video effects also providing the `VideoFrameReleaseControl` for releasing video frames. If `null`, the `CompositingVideoSinkProvider` with its default configuration will be used, and the renderer will drive releasing of video frames by itself.

Public functions

enableMayRenderStartOfStream

fun enableMayRenderStartOfStream(): Unit

Enables this renderer to render the start of the stream even if the state is not STATE_STARTED yet.

This is used to update the value of mayRenderStartOfStream passed to enable.

getCodecMaxInputSize

java-static fun getCodecMaxInputSize(codecInfo: MediaCodecInfo!, format: Format!): Int

Returns a maximum input size for a given codec and format.

Parameters
`codecInfo: MediaCodecInfo!`	Information about the `MediaCodec` being configured.
`format: Format!`	The format.

Returns
`Int`	A maximum input size in bytes, or `NO_VALUE` if a maximum could not be determined.

getName

fun getName(): String!

Returns the name of this renderer, for logging and debugging purposes. Should typically be the renderer's (un-obfuscated) class name.

Returns
`String!`	The name of this renderer.

handleMessage

fun handleMessage(@Renderer.MessageType messageType: Int, message: Any?): Unit

Handles a message delivered to the target.

Parameters
`@Renderer.MessageType messageType: Int`	The message type.
`message: Any?`	The message payload.

Throws
`androidx.media3.exoplayer.ExoPlaybackException`	If an error occurred whilst handling the message. Should only be thrown by targets that handle messages on the playback thread.

isEnded

fun isEnded(): Boolean

Whether the renderer is ready for the ExoPlayer instance to transition to STATE_ENDED. The player will make this transition as soon as true is returned by all of its renderers.

This method may be called when the renderer is in the following states: STATE_ENABLED, STATE_STARTED.

Returns
`Boolean`	Whether the renderer is ready for the player to transition to the ended state.

isReady

fun isReady(): Boolean

Whether the renderer is able to immediately render media from the current position.

If the renderer is in the STATE_STARTED state then returning true indicates that the renderer has everything that it needs to continue playback. Returning false indicates that the player should pause until the renderer is ready.

If the renderer is in the STATE_ENABLED state then returning true indicates that the renderer is ready for playback to be started. Returning false indicates that it is not.

This method may be called when the renderer is in the following states: STATE_ENABLED, STATE_STARTED.

Returns
`Boolean`	Whether the renderer is ready to render media.

render

@CallSuper
fun render(positionUs: Long, elapsedRealtimeUs: Long): Unit

Incrementally renders the SampleStream.

If the renderer is in the STATE_ENABLED state then each call to this method will do work toward being ready to render the SampleStream when the renderer is started. If the renderer is in the STATE_STARTED state then calls to this method will render the SampleStream in sync with the specified media positions.

The renderer may also render the very start of the media at the current position (e.g. the first frame of a video stream) while still in the STATE_ENABLED state, unless it's the initial start of the media after calling enable with mayRenderStartOfStream set to false.

This method should return quickly, and should not block if the renderer is unable to make useful progress.

This method may be called when the renderer is in the following states: STATE_ENABLED, STATE_STARTED.

Parameters
`positionUs: Long`	The current media time in microseconds, measured at the start of the current iteration of the rendering loop.
`elapsedRealtimeUs: Long`	`elapsedRealtime` in microseconds, measured at the start of the current iteration of the rendering loop.

Throws
`androidx.media3.exoplayer.ExoPlaybackException`	If an error occurs.

setPlaybackSpeed

fun setPlaybackSpeed(currentPlaybackSpeed: Float, targetPlaybackSpeed: Float): Unit

Indicates the playback speed to this renderer.

The default implementation is a no-op.

Parameters
`currentPlaybackSpeed: Float`	The factor by which playback is currently sped up.
`targetPlaybackSpeed: Float`	The target factor by which playback should be sped up. This may be different from `currentPlaybackSpeed`, for example, if the speed is temporarily adjusted for live playback.

Throws
`androidx.media3.exoplayer.ExoPlaybackException`	If an error occurs handling the playback speed.

setVideoEffects

fun setVideoEffects(effects: (Mutable)List<Effect!>!): Unit

Sets the video effects to apply.

shouldDropFrame

fun shouldDropFrame(
    earlyUs: Long,
    elapsedRealtimeUs: Long,
    isLastFrame: Boolean
): Boolean

Returns whether the frame should be dropped.

Parameters
`earlyUs: Long`	The time until the buffer should be presented in microseconds. A negative value indicates that the buffer is late.
`elapsedRealtimeUs: Long`	`elapsedRealtime` in microseconds, measured at the start of the current iteration of the rendering loop.
`isLastFrame: Boolean`	Whether the buffer is the last buffer in the current stream.

shouldForceReleaseFrame

fun shouldForceReleaseFrame(earlyUs: Long, elapsedSinceLastReleaseUs: Long): Boolean

Whether a frame should be forced for release.

Parameters
`earlyUs: Long`	The time until the buffer should be presented in microseconds. A negative value indicates that the buffer is late.
`elapsedSinceLastReleaseUs: Long`	The elapsed time since the last frame was released, in microseconds.

Returns
`Boolean`	Whether the video frame should be force released.

shouldIgnoreFrame

fun shouldIgnoreFrame(
    earlyUs: Long,
    positionUs: Long,
    elapsedRealtimeUs: Long,
    isLastFrame: Boolean,
    treatDroppedBuffersAsSkipped: Boolean
): Boolean

Returns whether this frame should be ignored.

Parameters
`earlyUs: Long`	The time until the buffer should be presented in microseconds. A negative value indicates that the buffer is late.
`positionUs: Long`	The playback position, in microseconds.
`elapsedRealtimeUs: Long`	`elapsedRealtime` in microseconds, measured at the start of the current iteration of the rendering loop.
`isLastFrame: Boolean`	Whether the buffer is the last buffer in the current stream.
`treatDroppedBuffersAsSkipped: Boolean`	Whether dropped buffers should be treated as intentionally skipped.

Returns
`Boolean`	Whether this frame should be ignored.

Throws
`androidx.media3.exoplayer.ExoPlaybackException`	If an error occurs.

Protected functions

canReuseCodec

protected fun canReuseCodec(
    codecInfo: MediaCodecInfo!,
    oldFormat: Format!,
    newFormat: Format!
): DecoderReuseEvaluation!

Evaluates whether the existing MediaCodec can be kept for a new Format, and if it can whether it requires reconfiguration.

The default implementation does not allow decoder reuse.

Parameters
`codecInfo: MediaCodecInfo!`	A `MediaCodecInfo` describing the decoder.
`oldFormat: Format!`	The `Format` for which the existing instance is configured.
`newFormat: Format!`	The new `Format`.

Returns
`DecoderReuseEvaluation!`	The result of the evaluation.

codecNeedsSetOutputSurfaceWorkaround

protected fun codecNeedsSetOutputSurfaceWorkaround(name: String!): Boolean

Returns whether the codec is known to implement setOutputSurface incorrectly.

If true is returned then we fall back to releasing and re-instantiating the codec instead.

Parameters
`name: String!`	The name of the codec.

Returns
`Boolean`	True if the device is known to implement `setOutputSurface` incorrectly.

createDecoderException

protected fun createDecoderException(cause: Throwable!, codecInfo: MediaCodecInfo?): MediaCodecDecoderException!

dropOutputBuffer

protected fun dropOutputBuffer(
    codec: MediaCodecAdapter!,
    index: Int,
    presentationTimeUs: Long
): Unit

Drops the output buffer with the specified index.

Parameters
`codec: MediaCodecAdapter!`	The codec that owns the output buffer.
`index: Int`	The index of the output buffer to drop.
`presentationTimeUs: Long`	The presentation time of the output buffer, in microseconds.

getCodecBufferFlags

protected fun getCodecBufferFlags(buffer: DecoderInputBuffer!): Int

Returns the flags that should be set on queueInputBuffer or queueSecureInputBuffer for this buffer.

Parameters
`buffer: DecoderInputBuffer!`	The input buffer.

Returns
`Int`	The flags to set on `queueInputBuffer` or `queueSecureInputBuffer`.

getCodecMaxValues

protected fun getCodecMaxValues(
    codecInfo: MediaCodecInfo!,
    format: Format!,
    streamFormats: Array<Format!>!
): MediaCodecVideoRenderer.CodecMaxValues!

Returns CodecMaxValues suitable for configuring a codec for format in a way that will allow possible adaptation to other compatible formats in streamFormats.

Parameters
`codecInfo: MediaCodecInfo!`	Information about the `MediaCodec` being configured.
`format: Format!`	The `Format` for which the codec is being configured.
`streamFormats: Array<Format!>!`	The possible stream formats.

Returns
`MediaCodecVideoRenderer.CodecMaxValues!`	Suitable `CodecMaxValues`.

getCodecNeedsEosPropagation

protected fun getCodecNeedsEosPropagation(): Boolean

Returns whether the codec needs the renderer to propagate the end-of-stream signal directly, rather than by using an end-of-stream buffer queued to the codec.

getCodecOperatingRateV23

protected fun getCodecOperatingRateV23(
    targetPlaybackSpeed: Float,
    format: Format!,
    streamFormats: Array<Format!>!
): Float

Returns the KEY_OPERATING_RATE value for a given playback speed, current Format and set of possible stream formats.

The default implementation returns CODEC_OPERATING_RATE_UNSET.

Parameters
`targetPlaybackSpeed: Float`	The target factor by which playback should be sped up. This may be different from the current playback speed, for example, if the speed is temporarily adjusted for live playback.
`format: Format!`	The `Format` for which the codec is being configured.
`streamFormats: Array<Format!>!`	The possible stream formats.

Returns
`Float`	The codec operating rate, or `CODEC_OPERATING_RATE_UNSET` if no codec operating rate should be set.

getDecoderInfos

protected fun getDecoderInfos(
    mediaCodecSelector: MediaCodecSelector!,
    format: Format!,
    requiresSecureDecoder: Boolean
): (Mutable)List<MediaCodecInfo!>!

Returns a list of decoders that can decode media in the specified format, in priority order.

Parameters
`mediaCodecSelector: MediaCodecSelector!`	The decoder selector.
`format: Format!`	The `Format` for which a decoder is required.
`requiresSecureDecoder: Boolean`	Whether a secure decoder is required.

Returns
`(Mutable)List<MediaCodecInfo!>!`	A list of `MediaCodecInfo`s corresponding to decoders. May be empty.

Throws
`androidx.media3.exoplayer.mediacodec.MediaCodecUtil.DecoderQueryException`	Thrown if there was an error querying decoders.

getMaxInputSize

protected java-static fun getMaxInputSize(codecInfo: MediaCodecInfo!, format: Format!): Int

Returns a maximum input buffer size for a given MediaCodec and Format.

Parameters
`codecInfo: MediaCodecInfo!`	Information about the `MediaCodec` being configured.
`format: Format!`	The format.

Returns
`Int`	A maximum input buffer size in bytes, or `NO_VALUE` if a maximum could not be determined.

getMediaCodecConfiguration

@TargetApi(value = 17)
protected fun getMediaCodecConfiguration(
    codecInfo: MediaCodecInfo!,
    format: Format!,
    crypto: MediaCrypto?,
    codecOperatingRate: Float
): MediaCodecAdapter.Configuration!

Returns the MediaCodecAdapter.Configuration that will be used to create and configure a MediaCodec to decode the given Format for a playback.

Parameters
`codecInfo: MediaCodecInfo!`	Information about the `MediaCodec` being configured.
`format: Format!`	The `Format` for which the codec is being configured.
`crypto: MediaCrypto?`	For drm protected playbacks, a `MediaCrypto` to use for decryption.
`codecOperatingRate: Float`	The codec operating rate, or `CODEC_OPERATING_RATE_UNSET` if no codec operating rate should be set.

Returns
`MediaCodecAdapter.Configuration!`	The parameters needed to call configure.

getMediaFormat

@TargetApi(value = 21)
protected fun getMediaFormat(
    format: Format!,
    codecMimeType: String!,
    codecMaxValues: MediaCodecVideoRenderer.CodecMaxValues!,
    codecOperatingRate: Float,
    deviceNeedsNoPostProcessWorkaround: Boolean,
    tunnelingAudioSessionId: Int
): MediaFormat!

Returns the framework MediaFormat that should be used to configure the decoder.

Parameters
`format: Format!`	The `Format` of media.
`codecMimeType: String!`	The MIME type handled by the codec.
`codecMaxValues: MediaCodecVideoRenderer.CodecMaxValues!`	Codec max values that should be used when configuring the decoder.
`codecOperatingRate: Float`	The codec operating rate, or `CODEC_OPERATING_RATE_UNSET` if no codec operating rate should be set.
`deviceNeedsNoPostProcessWorkaround: Boolean`	Whether the device is known to do post processing by default that isn't compatible with ExoPlayer.
`tunnelingAudioSessionId: Int`	The audio session id to use for tunneling, or `AUDIO_SESSION_ID_UNSET` if tunneling should not be enabled.

Returns
`MediaFormat!`	The framework `MediaFormat` that should be used to configure the decoder.

getSurface

protected fun getSurface(): Surface?

Returns the output surface.

handleInputBufferSupplementalData

@TargetApi(value = 29)
protected fun handleInputBufferSupplementalData(buffer: DecoderInputBuffer!): Unit

Handles supplemental data associated with an input buffer.

The default implementation is a no-op.

Parameters
`buffer: DecoderInputBuffer!`	The input buffer that is about to be queued.

Throws
`androidx.media3.exoplayer.ExoPlaybackException`	Thrown if an error occurs handling supplemental data.

maybeDropBuffersToKeyframe

protected fun maybeDropBuffersToKeyframe(
    positionUs: Long,
    treatDroppedBuffersAsSkipped: Boolean
): Boolean

Drops frames from the current output buffer to the next keyframe at or before the playback position. If no such keyframe exists, as the playback position is inside the same group of pictures as the buffer being processed, returns false. Returns true otherwise.

Parameters
`positionUs: Long`	The current playback position, in microseconds.
`treatDroppedBuffersAsSkipped: Boolean`	Whether dropped buffers should be treated as intentionally skipped.

Returns
`Boolean`	Whether any buffers were dropped.

Throws
`androidx.media3.exoplayer.ExoPlaybackException`	If an error occurs flushing the codec.

onCodecError

protected fun onCodecError(codecError: Exception!): Unit

Called when a codec error has occurred.

The default implementation is a no-op.

Parameters
`codecError: Exception!`	The error.

onCodecInitialized

protected fun onCodecInitialized(
    name: String!,
    configuration: MediaCodecAdapter.Configuration!,
    initializedTimestampMs: Long,
    initializationDurationMs: Long
): Unit

Called when a MediaCodec has been created and configured.

The default implementation is a no-op.

Parameters
`name: String!`	The name of the codec that was initialized.
`configuration: MediaCodecAdapter.Configuration!`	The `MediaCodecAdapter.Configuration` used to configure the codec.
`initializedTimestampMs: Long`	`elapsedRealtime` when initialization finished.
`initializationDurationMs: Long`	The time taken to initialize the codec in milliseconds.

onCodecReleased

protected fun onCodecReleased(name: String!): Unit

Called when a MediaCodec has been released.

The default implementation is a no-op.

Parameters
`name: String!`	The name of the codec that was released.

onDisabled

protected fun onDisabled(): Unit

Called when the renderer is disabled.

The default implementation is a no-op.

onEnabled

protected fun onEnabled(joining: Boolean, mayRenderStartOfStream: Boolean): Unit

Called when the renderer is enabled.

The default implementation is a no-op.

Parameters
`joining: Boolean`	Whether this renderer is being enabled to join an ongoing playback.
`mayRenderStartOfStream: Boolean`	Whether this renderer is allowed to render the start of the stream even if the state is not `STATE_STARTED` yet.

Throws
`androidx.media3.exoplayer.ExoPlaybackException`	If an error occurs.

onInit

protected fun onInit(): Unit

Called when the renderer is initialized.

onInputFormatChanged

protected fun onInputFormatChanged(formatHolder: FormatHolder!): DecoderReuseEvaluation?

Called when a new Format is read from the upstream MediaPeriod.

Parameters
`formatHolder: FormatHolder!`	A `FormatHolder` that holds the new `Format`.

Returns
`DecoderReuseEvaluation?`	The result of the evaluation to determine whether the existing decoder instance can be reused for the new format, or `null` if the renderer did not have a decoder.

Throws
`androidx.media3.exoplayer.ExoPlaybackException`	If an error occurs re-initializing the `MediaCodec`.

onOutputFormatChanged

protected fun onOutputFormatChanged(format: Format!, mediaFormat: MediaFormat?): Unit

Called when one of the output formats changes.

The default implementation is a no-op.

Parameters
`format: Format!`	The input `Format` to which future output now corresponds. If the renderer is in bypass mode, this is also the output format.
`mediaFormat: MediaFormat?`	The codec output `MediaFormat`, or `null` if the renderer is in bypass mode.

Throws
`androidx.media3.exoplayer.ExoPlaybackException`	Thrown if an error occurs configuring the output.

onPositionReset

protected fun onPositionReset(positionUs: Long, joining: Boolean): Unit

Called when the position is reset. This occurs when the renderer is enabled after onStreamChanged has been called, and also when a position discontinuity is encountered.

After a position reset, the renderer's SampleStream is guaranteed to provide samples starting from a key frame.

The default implementation is a no-op.

Parameters
`positionUs: Long`	The new playback position in microseconds.
`joining: Boolean`	Whether this renderer is being enabled to join an ongoing playback.

Throws
`androidx.media3.exoplayer.ExoPlaybackException`	If an error occurs.

onProcessedOutputBuffer

@CallSuper
protected fun onProcessedOutputBuffer(presentationTimeUs: Long): Unit

Called when an output buffer is successfully processed.

Parameters
`presentationTimeUs: Long`	The timestamp associated with the output buffer.

onProcessedStreamChange

protected fun onProcessedStreamChange(): Unit

Called after the last output buffer before a stream change has been processed.

onProcessedTunneledBuffer

protected fun onProcessedTunneledBuffer(presentationTimeUs: Long): Unit

Called when a buffer was processed in tunneling mode.

Throws
`androidx.media3.exoplayer.ExoPlaybackException`

onQueueInputBuffer

@CallSuper
protected fun onQueueInputBuffer(buffer: DecoderInputBuffer!): Unit

Called immediately before an input buffer is queued into the codec.

In tunneling mode for pre Marshmallow, the buffer is treated as if immediately output.

Parameters
`buffer: DecoderInputBuffer!`	The buffer to be queued.

Throws
`androidx.media3.exoplayer.ExoPlaybackException`	Thrown if an error occurs handling the input buffer.

onReadyToInitializeCodec

@CallSuper
protected fun onReadyToInitializeCodec(format: Format!): Unit

Called when ready to initialize the MediaCodecAdapter.

This method is called just before the renderer obtains the configuration for the MediaCodecAdapter and creates the adapter via the passed in MediaCodecAdapter.Factory.

The default implementation is a no-op.

Parameters
`format: Format!`	The `Format` for which the codec is being configured.

Throws
`androidx.media3.exoplayer.ExoPlaybackException`	If an error occurs preparing for initializing the codec.

onReadyToRegisterVideoSinkInputStream

protected fun onReadyToRegisterVideoSinkInputStream(): Unit

Called when ready to register an input stream when video effects are enabled.

The default implementation is a no-op.

onRelease

protected fun onRelease(): Unit

Called when the renderer is released.

The default implementation is a no-op.

onReset

@TargetApi(value = 17)
protected fun onReset(): Unit

Called when the renderer is reset.

The default implementation is a no-op.

onStarted

protected fun onStarted(): Unit

Called when the renderer is started.

The default implementation is a no-op.

Throws
`androidx.media3.exoplayer.ExoPlaybackException`	If an error occurs.

onStopped

protected fun onStopped(): Unit

Called when the renderer is stopped.

The default implementation is a no-op.

processOutputBuffer

protected fun processOutputBuffer(
    positionUs: Long,
    elapsedRealtimeUs: Long,
    codec: MediaCodecAdapter?,
    buffer: ByteBuffer?,
    bufferIndex: Int,
    bufferFlags: Int,
    sampleCount: Int,
    bufferPresentationTimeUs: Long,
    isDecodeOnlyBuffer: Boolean,
    isLastBuffer: Boolean,
    format: Format!
): Boolean

Processes an output media buffer.

When a new ByteBuffer is passed to this method its position and limit delineate the data to be processed. The return value indicates whether the buffer was processed in full. If true is returned then the next call to this method will receive a new buffer to be processed. If false is returned then the same buffer will be passed to the next call. An implementation of this method is free to modify the buffer and can assume that the buffer will not be externally modified between successive calls. Hence an implementation can, for example, modify the buffer's position to keep track of how much of the data it has processed.

Note that the first call to this method following a call to onPositionReset will always receive a new ByteBuffer to be processed.

Parameters
`positionUs: Long`	The current media time in microseconds, measured at the start of the current iteration of the rendering loop.
`elapsedRealtimeUs: Long`	`elapsedRealtime` in microseconds, measured at the start of the current iteration of the rendering loop.
`codec: MediaCodecAdapter?`	The `MediaCodecAdapter` instance, or null in bypass mode were no codec is used.
`buffer: ByteBuffer?`	The output buffer to process, or null if the buffer data is not made available to the application layer (see `getOutputBuffer`). This `buffer` can only be null for video data. Note that the buffer data can still be rendered in this case by using the `bufferIndex`.
`bufferIndex: Int`	The index of the output buffer.
`bufferFlags: Int`	The flags attached to the output buffer.
`sampleCount: Int`	The number of samples extracted from the sample queue in the buffer. This allows handling multiple samples as a batch for efficiency.
`bufferPresentationTimeUs: Long`	The presentation time of the output buffer in microseconds.
`isDecodeOnlyBuffer: Boolean`	Whether the buffer timestamp is less than the intended playback start position.
`isLastBuffer: Boolean`	Whether the buffer is known to contain the last sample of the current stream. This flag is set on a best effort basis, and any logic relying on it should degrade gracefully to handle cases where it's not set.
`format: Format!`	The `Format` associated with the buffer.

Returns
`Boolean`	Whether the output buffer was fully processed (for example, rendered or skipped).

Throws
`androidx.media3.exoplayer.ExoPlaybackException`	If an error occurs processing the output buffer.

renderOutputBuffer

protected fun renderOutputBuffer(
    codec: MediaCodecAdapter!,
    index: Int,
    presentationTimeUs: Long
): Unit

Renders the output buffer with the specified index. This method is only called if the platform API version of the device is less than 21.

Parameters
`codec: MediaCodecAdapter!`	The codec that owns the output buffer.
`index: Int`	The index of the output buffer to drop.
`presentationTimeUs: Long`	The presentation time of the output buffer, in microseconds.

renderOutputBufferV21

@RequiresApi(value = 21)
protected fun renderOutputBufferV21(
    codec: MediaCodecAdapter!,
    index: Int,
    presentationTimeUs: Long,
    releaseTimeNs: Long
): Unit

Renders the output buffer with the specified index. This method is only called if the platform API version of the device is 21 or later.

Parameters
`codec: MediaCodecAdapter!`	The codec that owns the output buffer.
`index: Int`	The index of the output buffer to drop.
`presentationTimeUs: Long`	The presentation time of the output buffer, in microseconds.
`releaseTimeNs: Long`	The wallclock time at which the frame should be displayed, in nanoseconds.

resetCodecStateForFlush

@CallSuper
protected fun resetCodecStateForFlush(): Unit

Resets the renderer internal state after a codec flush.

setOutputSurfaceV23

@RequiresApi(value = 23)
protected fun setOutputSurfaceV23(codec: MediaCodecAdapter!, surface: Surface!): Unit

shouldDropBuffersToKeyframe

protected fun shouldDropBuffersToKeyframe(
    earlyUs: Long,
    elapsedRealtimeUs: Long,
    isLastBuffer: Boolean
): Boolean

Returns whether to drop all buffers from the buffer being processed to the keyframe at or after the current playback position, if possible.

Parameters
`earlyUs: Long`	The time until the current buffer should be presented in microseconds. A negative value indicates that the buffer is late.
`elapsedRealtimeUs: Long`	`elapsedRealtime` in microseconds, measured at the start of the current iteration of the rendering loop.
`isLastBuffer: Boolean`	Whether the buffer is the last buffer in the current stream.

shouldDropOutputBuffer

protected fun shouldDropOutputBuffer(
    earlyUs: Long,
    elapsedRealtimeUs: Long,
    isLastBuffer: Boolean
): Boolean

Returns whether the buffer being processed should be dropped.

Parameters
`earlyUs: Long`	The time until the buffer should be presented in microseconds. A negative value indicates that the buffer is late.
`elapsedRealtimeUs: Long`	`elapsedRealtime` in microseconds, measured at the start of the current iteration of the rendering loop.
`isLastBuffer: Boolean`	Whether the buffer is the last buffer in the current stream.

shouldForceRenderOutputBuffer

protected fun shouldForceRenderOutputBuffer(
    earlyUs: Long,
    elapsedSinceLastRenderUs: Long
): Boolean

Returns whether to force rendering an output buffer.

Parameters
`earlyUs: Long`	The time until the current buffer should be presented in microseconds. A negative value indicates that the buffer is late.
`elapsedSinceLastRenderUs: Long`	The elapsed time since the last output buffer was rendered, in microseconds.

Returns
`Boolean`	Returns whether to force rendering an output buffer.

shouldInitCodec

protected fun shouldInitCodec(codecInfo: MediaCodecInfo!): Boolean

shouldSkipBuffersWithIdenticalReleaseTime

protected fun shouldSkipBuffersWithIdenticalReleaseTime(): Boolean

Returns whether to skip buffers that have an identical release time as the previous released buffer.

skipOutputBuffer

protected fun skipOutputBuffer(
    codec: MediaCodecAdapter!,
    index: Int,
    presentationTimeUs: Long
): Unit

Skips the output buffer with the specified index.

Parameters
`codec: MediaCodecAdapter!`	The codec that owns the output buffer.
`index: Int`	The index of the output buffer to skip.
`presentationTimeUs: Long`	The presentation time of the output buffer, in microseconds.

supportsFormat

@RendererCapabilities.Capabilities
protected fun supportsFormat(mediaCodecSelector: MediaCodecSelector!, format: Format!): Int

Returns the Capabilities for the given Format.

Parameters
`mediaCodecSelector: MediaCodecSelector!`	The decoder selector.
`format: Format!`	The `Format`.

Returns
`Int`	The `Capabilities` for this `Format`.

Throws
`androidx.media3.exoplayer.mediacodec.MediaCodecUtil.DecoderQueryException`	If there was an error querying decoders.

updateDroppedBufferCounters

protected fun updateDroppedBufferCounters(
    droppedInputBufferCount: Int,
    droppedDecoderBufferCount: Int
): Unit

Updates local counters and decoderCounters to reflect that buffers were dropped.

Parameters
`droppedInputBufferCount: Int`	The number of buffers dropped from the source before being passed to the decoder.
`droppedDecoderBufferCount: Int`	The number of buffers dropped after being passed to the decoder.

updateVideoFrameProcessingOffsetCounters

protected fun updateVideoFrameProcessingOffsetCounters(processingOffsetUs: Long): Unit

Updates local counters and DecoderCounters with a new video frame processing offset.

Parameters
`processingOffsetUs: Long`	The video frame processing offset.

MediaCodecVideoRenderer

Summary

Nested types

Public constructors

Public functions

Protected functions

Inherited Constants

Inherited functions

Inherited properties

Public constructors

MediaCodecVideoRenderer

MediaCodecVideoRenderer

MediaCodecVideoRenderer

MediaCodecVideoRenderer

MediaCodecVideoRenderer

MediaCodecVideoRenderer

MediaCodecVideoRenderer

Public functions

enableMayRenderStartOfStream

getCodecMaxInputSize

getName

handleMessage

isEnded

isReady

render

setPlaybackSpeed

setVideoEffects

shouldDropFrame

shouldForceReleaseFrame

shouldIgnoreFrame

Protected functions

canReuseCodec

codecNeedsSetOutputSurfaceWorkaround

createDecoderException

dropOutputBuffer

getCodecBufferFlags

getCodecMaxValues

getCodecNeedsEosPropagation

getCodecOperatingRateV23

getDecoderInfos

getMaxInputSize

getMediaCodecConfiguration

getMediaFormat

getSurface

handleInputBufferSupplementalData

maybeDropBuffersToKeyframe

onCodecError

onCodecInitialized

onCodecReleased

onDisabled

onEnabled

onInit

onInputFormatChanged

onOutputFormatChanged

onPositionReset

onProcessedOutputBuffer

onProcessedStreamChange

onProcessedTunneledBuffer

onQueueInputBuffer

onReadyToInitializeCodec

onReadyToRegisterVideoSinkInputStream

onRelease

onReset

onStarted

onStopped

processOutputBuffer

renderOutputBuffer

renderOutputBufferV21

resetCodecStateForFlush

setOutputSurfaceV23

shouldDropBuffersToKeyframe

shouldDropOutputBuffer

shouldForceRenderOutputBuffer

shouldInitCodec

shouldSkipBuffersWithIdenticalReleaseTime

skipOutputBuffer

supportsFormat

updateDroppedBufferCounters

updateVideoFrameProcessingOffsetCounters