WorkManager

Added in 1.0.0

Kotlin |Java

abstract class WorkManager

WorkManager is the recommended library for persistent work. Scheduled work is guaranteed to execute sometime after its Constraints are met. WorkManager allows observation of work status and the ability to create complex chains of work.

WorkManager uses an underlying job dispatching service when available based on the following criteria:

Uses JobScheduler for API 23+
Uses a custom AlarmManager + BroadcastReceiver implementation for API 14-22

All work must be done in a ListenableWorker class. A simple implementation, Worker, is recommended as the starting point for most developers. With the optional dependencies, you can also use CoroutineWorker or RxWorker. All background work is given a maximum of ten minutes to finish its execution. After this time has expired, the worker will be signalled to stop.

There are two types of work supported by WorkManager: OneTimeWorkRequest and PeriodicWorkRequest. You can enqueue requests using WorkManager as follows:

WorkManager workManager = WorkManager.getInstance(Context);
workManager.enqueue(new OneTimeWorkRequest.Builder(FooWorker.class).build());

A WorkRequest has an associated id that can be used for lookups and observation as follows:

WorkRequest request = new OneTimeWorkRequest.Builder(FooWorker.class).build();
workManager.enqueue(request);
LiveData<WorkInfo> status = workManager.getWorkInfoByIdLiveData(request.getId());
status.observe(...);

You can also use the id for cancellation:

WorkRequest request = new OneTimeWorkRequest.Builder(FooWorker.class).build();
workManager.enqueue(request);
workManager.cancelWorkById(request.getId());

You can chain work as follows:

WorkRequest request1 = new OneTimeWorkRequest.Builder(FooWorker.class).build();
WorkRequest request2 = new OneTimeWorkRequest.Builder(BarWorker.class).build();
WorkRequest request3 = new OneTimeWorkRequest.Builder(BazWorker.class).build();
workManager.beginWith(request1, request2).then(request3).enqueue();

Each call to beginWith returns a WorkContinuation upon which you can call WorkContinuation.then with a single OneTimeWorkRequest or a list of OneTimeWorkRequest to chain further work. This allows for creation of complex chains of work. For example, to create a chain like this:

             A
             |
       +----------+
       |          |
       B          C
       |
    +----+
    |    |
    D    E

you would enqueue them as follows:

WorkContinuation continuation = workManager.beginWith(A);
continuation.then(B).then(D, E).enqueue();  // A is implicitly enqueued here
continuation.then(C).enqueue();

Work is eligible for execution when all of its prerequisites are complete. If any of its prerequisites fail or are cancelled, the work will never run.

WorkRequests can accept Constraints, inputs (see Data), and backoff criteria. WorkRequests can be tagged with human-readable Strings (see WorkRequest.Builder.addTag), and chains of work can be given a uniquely-identifiable name (see beginUniqueWork).

Initializing WorkManager

By default, WorkManager auto-initializes itself using a built-in ContentProvider. ContentProviders are created and run before the Application object, so this allows the WorkManager singleton to be setup before your code can run in most cases. This is suitable for most developers. However, you can provide a custom Configuration by using Configuration.Provider or WorkManager.initialize.

Renaming and Removing ListenableWorker Classes

Exercise caution in renaming classes derived from ListenableWorkers. WorkManager stores the class name in its internal database when the WorkRequest is enqueued so it can later create an instance of that worker when constraints are met. Unless otherwise specified in the WorkManager Configuration, this is done in the default WorkerFactory which tries to reflectively create the ListenableWorker object. Therefore, renaming or removing these classes is dangerous - if there is pending work with the given class, it will fail permanently if the class cannot be found. If you are using a custom WorkerFactory, make sure you properly handle cases where the class is not found so that your code does not crash.

In case it is desirable to rename a class, implement a custom WorkerFactory that instantiates the right ListenableWorker for the old class name.

Summary

Nested types
`enum WorkManager.UpdateResult : Enum` An enumeration of results for `WorkManager.updateWork` method.

Public companion functions
`open WorkManager`	`getInstance()` This function is deprecated. Use the overload receiving Context
`open WorkManager`	`getInstance(context: Context)` Retrieves the `default` singleton instance of `WorkManager`.
`open Unit`	`initialize(context: Context, configuration: Configuration)` Used to do a one-time initialization of the `WorkManager` singleton with a custom `Configuration`.
`open Boolean`	`isInitialized()` Provides a way to check if `WorkManager` is initialized in this process.

Public functions
`WorkContinuation`	`beginUniqueWork( uniqueWorkName: String, existingWorkPolicy: ExistingWorkPolicy, request: OneTimeWorkRequest )` This method allows you to begin unique chains of work for situations where you only want one chain with a given name to be active at a time.
`abstract WorkContinuation`	`beginUniqueWork( uniqueWorkName: String, existingWorkPolicy: ExistingWorkPolicy, requests: List<OneTimeWorkRequest> )` This method allows you to begin unique chains of work for situations where you only want one chain with a given name to be active at a time.
`WorkContinuation`	`beginWith(request: OneTimeWorkRequest)` Begins a chain with one or more `OneTimeWorkRequest`s, which can be enqueued together in the future using `WorkContinuation.enqueue`.
`abstract WorkContinuation`	`beginWith(requests: List<OneTimeWorkRequest>)` Begins a chain with one or more `OneTimeWorkRequest`s, which can be enqueued together in the future using `WorkContinuation.enqueue`.
`abstract Operation`	`cancelAllWork()` Cancels all unfinished work.
`abstract Operation`	`cancelAllWorkByTag(tag: String)` Cancels all unfinished work with the given tag.
`abstract Operation`	`cancelUniqueWork(uniqueWorkName: String)` Cancels all unfinished work in the work chain with the given name.
`abstract Operation`	`cancelWorkById(id: UUID)` Cancels work with the given id if it isn't finished.
`abstract PendingIntent`	`createCancelPendingIntent(id: UUID)` Creates a `PendingIntent` which can be used to cancel a `WorkRequest` with the given `id`.
`Operation`	`enqueue(request: WorkRequest)` Enqueues one item for background processing.
`abstract Operation`	`enqueue(requests: List<WorkRequest>)` Enqueues one or more items for background processing.
`abstract Operation`	`enqueueUniquePeriodicWork( uniqueWorkName: String, existingPeriodicWorkPolicy: ExistingPeriodicWorkPolicy, request: PeriodicWorkRequest )` This method allows you to enqueue a uniquely-named `PeriodicWorkRequest`, where only one PeriodicWorkRequest of a particular name can be active at a time.
`open Operation`	`enqueueUniqueWork( uniqueWorkName: String, existingWorkPolicy: ExistingWorkPolicy, request: OneTimeWorkRequest )` This method allows you to enqueue `work` requests to a uniquely-named `WorkContinuation`, where only one continuation of a particular name can be active at a time.
`abstract Operation`	`enqueueUniqueWork( uniqueWorkName: String, existingWorkPolicy: ExistingWorkPolicy, requests: List<OneTimeWorkRequest> )` This method allows you to enqueue `work` requests to a uniquely-named `WorkContinuation`, where only one continuation of a particular name can be active at a time.
`abstract ListenableFuture<Long>`	`getLastCancelAllTimeMillis()` Gets a `ListenableFuture` of the last time all work was cancelled.
`abstract LiveData<Long>`	`getLastCancelAllTimeMillisLiveData()` Gets a `LiveData` of the last time all work was cancelled.
`abstract ListenableFuture<WorkInfo?>`	`getWorkInfoById(id: UUID)` Gets a `ListenableFuture` of the `WorkInfo` for a given work id.
`abstract Flow<WorkInfo?>`	`getWorkInfoByIdFlow(id: UUID)` Gets a `Flow` of the `WorkInfo` for a given work id.
`abstract LiveData<WorkInfo?>`	`getWorkInfoByIdLiveData(id: UUID)` Gets a `LiveData` of the `WorkInfo` for a given work id.
`abstract ListenableFuture<List<WorkInfo>>`	`getWorkInfos(workQuery: WorkQuery)` Gets the `ListenableFuture` of the `List` of `WorkInfo` for all work referenced by the `WorkQuery` specification.
`abstract ListenableFuture<List<WorkInfo>>`	`getWorkInfosByTag(tag: String)` Gets a `ListenableFuture` of the `WorkInfo` for all work for a given tag.
`abstract Flow<List<WorkInfo>>`	`getWorkInfosByTagFlow(tag: String)` Gets a `Flow` of the `WorkInfo` for all work for a given tag.
`abstract LiveData<List<WorkInfo>>`	`getWorkInfosByTagLiveData(tag: String)` Gets a `LiveData` of the `WorkInfo` for all work for a given tag.
`abstract Flow<List<WorkInfo>>`	`getWorkInfosFlow(workQuery: WorkQuery)` Gets the `Flow` of the `List` of `WorkInfo` for all work referenced by the `WorkQuery` specification.
`abstract ListenableFuture<List<WorkInfo>>`	`getWorkInfosForUniqueWork(uniqueWorkName: String)` Gets a `ListenableFuture` of the `WorkInfo` for all work in a work chain with a given unique name.
`abstract Flow<List<WorkInfo>>`	`getWorkInfosForUniqueWorkFlow(uniqueWorkName: String)` Gets a `Flow` of the `WorkInfo` for all work in a work chain with a given unique name.
`abstract LiveData<List<WorkInfo>>`	`getWorkInfosForUniqueWorkLiveData(uniqueWorkName: String)` Gets a `LiveData` of the `WorkInfo` for all work in a work chain with a given unique name.
`abstract LiveData<List<WorkInfo>>`	`getWorkInfosLiveData(workQuery: WorkQuery)` Gets the `LiveData` of the `List` of `WorkInfo` for all work referenced by the `WorkQuery` specification.
`abstract Operation`	`pruneWork()` Prunes all eligible finished work from the internal database.
`abstract ListenableFuture<WorkManager.UpdateResult>`	`updateWork(request: WorkRequest)` Updates the work with the new specification.

Public properties
`abstract Configuration`	`configuration` The `Configuration` instance that `WorkManager` was initialized with.

Public companion functions

getInstance

Added in 2.10.0-rc01

Deprecated in 2.10.0-rc01

open fun getInstance(): WorkManager

Retrieves the default singleton instance of WorkManager.

Returns
`WorkManager`	The singleton instance of `WorkManager`; this may be `null` in unusual circumstances where you have disabled automatic initialization and have failed to manually call `initialize`.

Throws
`kotlin.IllegalStateException`	If WorkManager is not initialized properly as per the exception message.

getInstance

Added in 2.10.0-rc01

open fun getInstance(context: Context): WorkManager

Retrieves the default singleton instance of WorkManager.

Parameters
`context: Context`	A `Context` for on-demand initialization.

Returns
`WorkManager`	The singleton instance of `WorkManager`; this may be `null` in unusual circumstances where you have disabled automatic initialization and have failed to manually call `initialize`.

Throws
`kotlin.IllegalStateException`	If WorkManager is not initialized properly

initialize

Added in 2.10.0-rc01

open fun initialize(context: Context, configuration: Configuration): Unit

Used to do a one-time initialization of the WorkManager singleton with a custom Configuration. By default, this method should not be called because WorkManager is automatically initialized. To initialize WorkManager yourself, please follow these steps:

Disable androidx.work.WorkManagerInitializer in your manifest.
Invoke this method in Application#onCreate or a ContentProvider. Note that this method must be invoked in one of these two places or you risk getting a NullPointerException in getInstance.

This method throws an IllegalStateException when attempting to initialize in direct boot mode.

This method throws an exception if it is called multiple times.

Parameters
`context: Context`	A `Context` object for configuration purposes. Internally, this class will call `Context.getApplicationContext`, so you may safely pass in any Context without risking a memory leak.
`configuration: Configuration`	The `Configuration` for used to set up WorkManager.

See also
`Configuration.Provider`	for on-demand initialization.

isInitialized

Added in 2.10.0-rc01

open fun isInitialized(): Boolean

Provides a way to check if WorkManager is initialized in this process.

Returns
`Boolean`	`true` if `WorkManager` has been initialized in this process.

Public functions

beginUniqueWork

Added in 1.0.0

fun beginUniqueWork(
    uniqueWorkName: String,
    existingWorkPolicy: ExistingWorkPolicy,
    request: OneTimeWorkRequest
): WorkContinuation

This method allows you to begin unique chains of work for situations where you only want one chain with a given name to be active at a time. For example, you may only want one sync operation to be active. If there is one pending, you can choose to let it run or replace it with your new work.

The uniqueWorkName uniquely identifies this set of work.

If this method determines that new work should be enqueued and run, all records of previous work with uniqueWorkName will be pruned. If this method determines that new work should NOT be run, then the entire chain will be considered a no-op.

If any work in the chain fails or is cancelled, all of its dependent work inherits that state and will never run. This is particularly important if you are using APPEND as your ExistingWorkPolicy.

Parameters
`uniqueWorkName: String`	A unique name which for this chain of work
`existingWorkPolicy: ExistingWorkPolicy`	An `ExistingWorkPolicy`
`request: OneTimeWorkRequest`	The `OneTimeWorkRequest` to enqueue. `REPLACE` ensures that if there is pending work labelled with `uniqueWorkName`, it will be cancelled and the new work will run. `KEEP` will run the new sequence of work only if there is no pending work labelled with `uniqueWorkName`. `APPEND` will create a new sequence of work if there is no existing work with `uniqueWorkName`; otherwise, `work` will be added as a child of all leaf nodes labelled with `uniqueWorkName`.

Returns
`WorkContinuation`	A `WorkContinuation` that allows further chaining

beginUniqueWork

Added in 1.0.0

abstract fun beginUniqueWork(
    uniqueWorkName: String,
    existingWorkPolicy: ExistingWorkPolicy,
    requests: List<OneTimeWorkRequest>
): WorkContinuation

The uniqueWorkName uniquely identifies this set of work.

Parameters
`uniqueWorkName: String`	A unique name which for this chain of work
`existingWorkPolicy: ExistingWorkPolicy`	An `ExistingWorkPolicy`; see below for more information
`requests: List<OneTimeWorkRequest>`	One or more `OneTimeWorkRequest` to enqueue. `REPLACE` ensures that if there is pending work labelled with `uniqueWorkName`, it will be cancelled and the new work will run. `KEEP` will run the new sequence of work only if there is no pending work labelled with `uniqueWorkName`. `APPEND` will create a new sequence of work if there is no existing work with `uniqueWorkName`; otherwise, `work` will be added as a child of all leaf nodes labelled with `uniqueWorkName`.

Returns
`WorkContinuation`	A `WorkContinuation` that allows further chaining

beginWith

Added in 1.0.0

fun beginWith(request: OneTimeWorkRequest): WorkContinuation

Begins a chain with one or more OneTimeWorkRequests, which can be enqueued together in the future using WorkContinuation.enqueue.

If any work in the chain fails or is cancelled, all of its dependent work inherits that state and will never run.

Parameters
`request: OneTimeWorkRequest`	One or more `OneTimeWorkRequest` to start a chain of work

Returns
`WorkContinuation`	A `WorkContinuation` that allows for further chaining of dependent `OneTimeWorkRequest`

beginWith

Added in 1.0.0

abstract fun beginWith(requests: List<OneTimeWorkRequest>): WorkContinuation

Begins a chain with one or more OneTimeWorkRequests, which can be enqueued together in the future using WorkContinuation.enqueue.

If any work in the chain fails or is cancelled, all of its dependent work inherits that state and will never run.

Parameters
`requests: List<OneTimeWorkRequest>`	One or more `OneTimeWorkRequest` to start a chain of work

Returns
`WorkContinuation`	A `WorkContinuation` that allows for further chaining of dependent `OneTimeWorkRequest`

cancelAllWork

Added in 1.0.0

abstract fun cancelAllWork(): Operation

Cancels all unfinished work. Use this method with extreme caution! By invoking it, you will potentially affect other modules or libraries in your codebase. It is strongly recommended that you use one of the other cancellation methods at your disposal.

Upon cancellation, ListenableFuture returned by ListenableWorker.startWork will be cancelled. Also ListenableWorker.onStopped will be invoked for any affected workers.

Returns
`Operation`	An `Operation` that can be used to determine when the cancelAllWork has completed

cancelAllWorkByTag

Added in 1.0.0

abstract fun cancelAllWorkByTag(tag: String): Operation

Cancels all unfinished work with the given tag. Note that cancellation is a best-effort policy and work that is already executing may continue to run. Upon cancellation, ListenableFuture returned by ListenableWorker.startWork will be cancelled. Also ListenableWorker.onStopped will be invoked for any affected workers.

Parameters
`tag: String`	The tag used to identify the work

Returns
`Operation`	An `Operation` that can be used to determine when the cancelAllWorkByTag has completed

cancelUniqueWork

Added in 1.0.0

abstract fun cancelUniqueWork(uniqueWorkName: String): Operation

Cancels all unfinished work in the work chain with the given name. Note that cancellation is a best-effort policy and work that is already executing may continue to run. Upon cancellation, ListenableFuture returned by ListenableWorker.startWork will be cancelled. Also ListenableWorker.onStopped will be invoked for any affected workers.

Parameters
`uniqueWorkName: String`	The unique name used to identify the chain of work

Returns
`Operation`	An `Operation` that can be used to determine when the cancelUniqueWork has completed

cancelWorkById

Added in 1.0.0

abstract fun cancelWorkById(id: UUID): Operation

Cancels work with the given id if it isn't finished. Note that cancellation is a best-effort policy and work that is already executing may continue to run. Upon cancellation, ListenableFuture returned by ListenableWorker.startWork will be cancelled. Also ListenableWorker.onStopped will be invoked for any affected workers.

Parameters
`id: UUID`	The id of the work

Returns
`Operation`	An `Operation` that can be used to determine when the cancelWorkById has completed

createCancelPendingIntent

Added in 2.3.0

abstract fun createCancelPendingIntent(id: UUID): PendingIntent

Creates a PendingIntent which can be used to cancel a WorkRequest with the given id.

Parameters
`id: UUID`	The `WorkRequest` id.

Returns
`PendingIntent`	The `PendingIntent` that can be used to cancel the `WorkRequest`.

enqueue

Added in 1.0.0

fun enqueue(request: WorkRequest): Operation

Enqueues one item for background processing.

Parameters
`request: WorkRequest`	The `WorkRequest` to enqueue

Returns
`Operation`	An `Operation` that can be used to determine when the enqueue has completed

enqueue

abstract fun enqueue(requests: List<WorkRequest>): Operation

Enqueues one or more items for background processing.

Parameters
`requests: List<WorkRequest>`	One or more `WorkRequest` to enqueue

Returns
`Operation`	An `Operation` that can be used to determine when the enqueue has completed

enqueueUniquePeriodicWork

Added in 1.0.0

abstract fun enqueueUniquePeriodicWork(
    uniqueWorkName: String,
    existingPeriodicWorkPolicy: ExistingPeriodicWorkPolicy,
    request: PeriodicWorkRequest
): Operation

This method allows you to enqueue a uniquely-named PeriodicWorkRequest, where only one PeriodicWorkRequest of a particular name can be active at a time. For example, you may only want one sync operation to be active. If there is one pending, you can choose to let it run or replace it with your new work.

The uniqueWorkName uniquely identifies this PeriodicWorkRequest.

Parameters
`uniqueWorkName: String`	A unique name which for this operation
`existingPeriodicWorkPolicy: ExistingPeriodicWorkPolicy`	An `ExistingPeriodicWorkPolicy`
`request: PeriodicWorkRequest`	A `PeriodicWorkRequest` to enqueue. `REPLACE` ensures that if there is pending work labelled with `uniqueWorkName`, it will be cancelled and the new work will run. `KEEP` will run the new PeriodicWorkRequest only if there is no pending work labelled with `uniqueWorkName`.

Returns
`Operation`	An `Operation` that can be used to determine when the enqueue has completed

enqueueUniqueWork

Added in 1.0.0

open fun enqueueUniqueWork(
    uniqueWorkName: String,
    existingWorkPolicy: ExistingWorkPolicy,
    request: OneTimeWorkRequest
): Operation

This method allows you to enqueue work requests to a uniquely-named WorkContinuation, where only one continuation of a particular name can be active at a time. For example, you may only want one sync operation to be active. If there is one pending, you can choose to let it run or replace it with your new work.

The uniqueWorkName uniquely identifies this WorkContinuation.

Parameters
`uniqueWorkName: String`	A unique name which for this operation
`existingWorkPolicy: ExistingWorkPolicy`	An `ExistingWorkPolicy`; see below for more information
`request: OneTimeWorkRequest`	The `OneTimeWorkRequest`s to enqueue. `REPLACE` ensures that if there is pending work labelled with `uniqueWorkName`, it will be cancelled and the new work will run. `KEEP` will run the new OneTimeWorkRequests only if there is no pending work labelled with `uniqueWorkName`. `APPEND` will append the OneTimeWorkRequests as leaf nodes labelled with `uniqueWorkName`.

Returns
`Operation`	An `Operation` that can be used to determine when the enqueue has completed

enqueueUniqueWork

Added in 1.0.0

abstract fun enqueueUniqueWork(
    uniqueWorkName: String,
    existingWorkPolicy: ExistingWorkPolicy,
    requests: List<OneTimeWorkRequest>
): Operation

The uniqueWorkName uniquely identifies this WorkContinuation.

Parameters
`uniqueWorkName: String`	A unique name which for this operation
`existingWorkPolicy: ExistingWorkPolicy`	An `ExistingWorkPolicy`
`requests: List<OneTimeWorkRequest>`	`OneTimeWorkRequest`s to enqueue. `REPLACE` ensures that if there is pending work labelled with `uniqueWorkName`, it will be cancelled and the new work will run. `KEEP` will run the new OneTimeWorkRequests only if there is no pending work labelled with `uniqueWorkName`. `APPEND` will append the OneTimeWorkRequests as leaf nodes labelled with `uniqueWorkName`.

Returns
`Operation`	An `Operation` that can be used to determine when the enqueue has completed

getLastCancelAllTimeMillis

Added in 1.0.0

abstract fun getLastCancelAllTimeMillis(): ListenableFuture<Long>

Gets a ListenableFuture of the last time all work was cancelled. This method is intended for use by library and module developers who have dependent data in their own repository that must be updated or deleted in case someone cancels their work without their prior knowledge.

Returns
`ListenableFuture<Long>`	A `ListenableFuture` of the timestamp (`System#getCurrentTimeMillis()`) when `cancelAllWork` was last invoked; this timestamp may be `0L` if this never occurred

getLastCancelAllTimeMillisLiveData

Added in 1.0.0

abstract fun getLastCancelAllTimeMillisLiveData(): LiveData<Long>

Gets a LiveData of the last time all work was cancelled. This method is intended for use by library and module developers who have dependent data in their own repository that must be updated or deleted in case someone cancels their work without their prior knowledge.

Returns
`LiveData<Long>`	A `LiveData` of the timestamp (`System#getCurrentTimeMillis()`) when `cancelAllWork` was last invoked; this timestamp may be `0L` if this never occurred

getWorkInfoById

Added in 1.0.0

abstract fun getWorkInfoById(id: UUID): ListenableFuture<WorkInfo?>

Gets a ListenableFuture of the WorkInfo for a given work id.

Parameters
`id: UUID`	The id of the work

Returns
`ListenableFuture<WorkInfo?>`	A `ListenableFuture` of the `WorkInfo` associated with `id`; note that this `WorkInfo` may be `null` if `id` is not known to WorkManager

getWorkInfoByIdFlow

Added in 2.9.0

abstract fun getWorkInfoByIdFlow(id: UUID): Flow<WorkInfo?>

Gets a Flow of the WorkInfo for a given work id.

Parameters
`id: UUID`	The id of the work

Returns
`Flow<WorkInfo?>`	A `Flow` of the `WorkInfo` associated with `id`; note that this `WorkInfo` may be `null` if `id` is not known to WorkManager.

getWorkInfoByIdLiveData

Added in 1.0.0

abstract fun getWorkInfoByIdLiveData(id: UUID): LiveData<WorkInfo?>

Gets a LiveData of the WorkInfo for a given work id.

Parameters
`id: UUID`	The id of the work

Returns
`LiveData<WorkInfo?>`	A `LiveData` of the `WorkInfo` associated with `id`; note that this `WorkInfo` may be `null` if `id` is not known to WorkManager.

getWorkInfos

Added in 2.4.0

abstract fun getWorkInfos(workQuery: WorkQuery): ListenableFuture<List<WorkInfo>>

Gets the ListenableFuture of the List of WorkInfo for all work referenced by the WorkQuery specification.

Parameters
`workQuery: WorkQuery`	The work query specification

Returns
`ListenableFuture<List<WorkInfo>>`	A `ListenableFuture` of the `List` of `WorkInfo` for work referenced by this `WorkQuery`.

getWorkInfosByTag

Added in 1.0.0

abstract fun getWorkInfosByTag(tag: String): ListenableFuture<List<WorkInfo>>

Gets a ListenableFuture of the WorkInfo for all work for a given tag.

Parameters
`tag: String`	The tag of the work

Returns
`ListenableFuture<List<WorkInfo>>`	A `ListenableFuture` list of `WorkInfo` for work tagged with `tag`

getWorkInfosByTagFlow

Added in 2.9.0

abstract fun getWorkInfosByTagFlow(tag: String): Flow<List<WorkInfo>>

Gets a Flow of the WorkInfo for all work for a given tag.

Parameters
`tag: String`	The tag of the work

Returns
`Flow<List<WorkInfo>>`	A `Flow` list of `WorkInfo` for work tagged with `tag`

getWorkInfosByTagLiveData

Added in 1.0.0

abstract fun getWorkInfosByTagLiveData(tag: String): LiveData<List<WorkInfo>>

Gets a LiveData of the WorkInfo for all work for a given tag.

Parameters
`tag: String`	The tag of the work

Returns
`LiveData<List<WorkInfo>>`	A `LiveData` list of `WorkInfo` for work tagged with `tag`

getWorkInfosFlow

Added in 2.9.0

abstract fun getWorkInfosFlow(workQuery: WorkQuery): Flow<List<WorkInfo>>

Gets the Flow of the List of WorkInfo for all work referenced by the WorkQuery specification.

Parameters
`workQuery: WorkQuery`	The work query specification

Returns
`Flow<List<WorkInfo>>`	A `Flow` of the `List` of `WorkInfo` for work referenced by this `WorkQuery`.

getWorkInfosForUniqueWork

Added in 1.0.0

abstract fun getWorkInfosForUniqueWork(uniqueWorkName: String): ListenableFuture<List<WorkInfo>>

Gets a ListenableFuture of the WorkInfo for all work in a work chain with a given unique name.

Parameters
`uniqueWorkName: String`	The unique name used to identify the chain of work

Returns
`ListenableFuture<List<WorkInfo>>`	A `ListenableFuture` of the `WorkInfo` for work in the chain named `uniqueWorkName`

getWorkInfosForUniqueWorkFlow

Added in 2.9.0

abstract fun getWorkInfosForUniqueWorkFlow(uniqueWorkName: String): Flow<List<WorkInfo>>

Gets a Flow of the WorkInfo for all work in a work chain with a given unique name.

Parameters
`uniqueWorkName: String`	The unique name used to identify the chain of work

Returns
`Flow<List<WorkInfo>>`	A `Flow` of the `WorkInfo` for work in the chain named `uniqueWorkName`

getWorkInfosForUniqueWorkLiveData

Added in 1.0.0

abstract fun getWorkInfosForUniqueWorkLiveData(uniqueWorkName: String): LiveData<List<WorkInfo>>

Gets a LiveData of the WorkInfo for all work in a work chain with a given unique name.

Parameters
`uniqueWorkName: String`	The unique name used to identify the chain of work

Returns
`LiveData<List<WorkInfo>>`	A `LiveData` of the `WorkInfo` for work in the chain named `uniqueWorkName`

getWorkInfosLiveData

Added in 2.4.0

abstract fun getWorkInfosLiveData(workQuery: WorkQuery): LiveData<List<WorkInfo>>

Gets the LiveData of the List of WorkInfo for all work referenced by the WorkQuery specification.

Parameters
`workQuery: WorkQuery`	The work query specification

Returns
`LiveData<List<WorkInfo>>`	A `LiveData` of the `List` of `WorkInfo` for work referenced by this `WorkQuery`.

pruneWork

Added in 1.0.0

abstract fun pruneWork(): Operation

Prunes all eligible finished work from the internal database. Eligible work must be finished (WorkInfo.State.SUCCEEDED, WorkInfo.State.FAILED, or WorkInfo.State.CANCELLED), with zero unfinished dependents.

Use this method with caution; by invoking it, you (and any modules and libraries in your codebase) will no longer be able to observe the WorkInfo of the pruned work. You do not normally need to call this method - WorkManager takes care to auto-prune its work after a sane period of time. This method also ignores the OneTimeWorkRequest.Builder.keepResultsForAtLeast policy.

Returns
`Operation`	An `Operation` that can be used to determine when the pruneWork has completed

updateWork

Added in 2.8.0

abstract fun updateWork(request: WorkRequest): ListenableFuture<WorkManager.UpdateResult>

Updates the work with the new specification. A WorkRequest passed as parameter must have an id set with WorkRequest.Builder.setId that matches an id of the previously enqueued work.

It preserves enqueue time, e.g. if a work was enqueued 3 hours ago and had 6 hours long initial delay, after the update it would be still eligible for run in 3 hours, assuming that initial delay wasn't updated.

If the work being updated is currently running the returned ListenableFuture will be completed with UpdateResult.APPLIED_FOR_NEXT_RUN. In this case the current run won't be interrupted and will continue to rely on previous state of the request, e.g. using old constraints, tags etc. However, on the next run, e.g. retry of one-time Worker or another iteration of periodic worker, the new worker specification will be used.

If the one time work that is updated is already finished the returned ListenableFuture will be completed with UpdateResult.NOT_APPLIED.

If update can be applied immediately, e.g. the updated work isn't currently running, the returned ListenableFuture will be completed with UpdateResult.APPLIED_IMMEDIATELY.

If the work with the given id (request.getId()) doesn't exist the returned ListenableFuture will be completed exceptionally with IllegalArgumentException.

Worker type can't be changed, OneTimeWorkRequest can't be updated to PeriodicWorkRequest and otherwise, the returned ListenableFuture will be completed with IllegalArgumentException.

Parameters
`request: WorkRequest`	the new specification for the work.

Returns
`ListenableFuture<WorkManager.UpdateResult>`	a `ListenableFuture` that will be successfully completed if the update was successful. The future will be completed with an exception if the work is already running or finished.

Public properties

configuration

Added in 2.8.0

abstract val configuration: Configuration

The Configuration instance that WorkManager was initialized with.

WorkManager

Initializing WorkManager

Renaming and Removing ListenableWorker Classes

Summary

Nested types

Public companion functions

Public functions

Public properties

Public companion functions

getInstance

getInstance

initialize

isInitialized

Public functions

beginUniqueWork

beginUniqueWork

beginWith

beginWith

cancelAllWork

cancelAllWorkByTag

cancelUniqueWork

cancelWorkById

createCancelPendingIntent

enqueue

enqueue

enqueueUniquePeriodicWork

enqueueUniqueWork

enqueueUniqueWork

getLastCancelAllTimeMillis

getLastCancelAllTimeMillisLiveData

getWorkInfoById

getWorkInfoByIdFlow

getWorkInfoByIdLiveData

getWorkInfos

getWorkInfosByTag

getWorkInfosByTagFlow

getWorkInfosByTagLiveData

getWorkInfosFlow

getWorkInfosForUniqueWork

getWorkInfosForUniqueWorkFlow

getWorkInfosForUniqueWorkLiveData

getWorkInfosLiveData

pruneWork

updateWork

Public properties

configuration